perfect.I need that chain tensioner. I'm from Peru and they don't sell them here.
@ronfernandes28849 күн бұрын
If you find a good welder he can weld it for you - you can also source it from eBay
@jorgealejandrokaramgurrola84148 күн бұрын
Webike...yo lo compre por $100 usd envío incluído...tardo 5 días en llegar a México
@dirtymotorcyclevagabond28 күн бұрын
Hi, thank you for the video. It not necessary to remove the thermostat housing as the manual says?
@ALEXANDR99113 ай бұрын
Perfect 👌 thank you for video
@dimosthenismagos79823 ай бұрын
Hallo, i have some noise, klicking-tapping when my NC 750X DCT is fully hot and not at cold starts. I'll give you a link just to hear the engine ad please tell me your opinion, cam tensioner failure, tappet clatter or normal. They seem to be noisy engines. What was the symptom of the tensioner failure ? Thank you. kzread.info/dash/bejne/Y52bm8uyY8ytk7g.html
@gavsmith43 Жыл бұрын
I realise this is a fairly old video, but do you remember if you also had performance issues issues at the time? Appearing like the engine misfiring. Revs going up/down whilst just idling?
@ronfernandes2884 Жыл бұрын
sorry for the late reply - yes it was inconsistently firing when idling.
@maselbac Жыл бұрын
What a guy! Completed most of this job one handed ❤
@robans Жыл бұрын
How did you diagnose the problem? How did you know that it was chain tensioner?
@ronfernandes2884 Жыл бұрын
I opened the tappet cover several time before realizing that the plunger was not in the correct orientation _ I compared it to another video of someone adjusting the valve clearance.
@andreinabernal8907 Жыл бұрын
Hola, porque sucede esto? . Tenemos un NC 750X 2020 CON 16.000 KM
@kamilhorvat8290 Жыл бұрын
Too bad you didn't record engine sound before and after cam chain tensioner replacement. It'd be helpful for many other NC riders.
@ronfernandes2884 Жыл бұрын
yes that’s too bad I didn’t record that.
@RobertSmith-bh5cv2 жыл бұрын
I'm shocked the tensioner broke. Have you heard of others breaking? There are NC owners with very high mileage and they haven't reported having this happen.
@ronfernandes2884 Жыл бұрын
yes you’re right - even I wasn’t convinced that it was a broken tensioner at first. I’m guessing it may have been me riding it hard.
5 ай бұрын
@@ronfernandes2884Mine broke around 14800 kilometers (~9200 miles). It didn't break exactly like this, but a little tab broke at the bottom which allowed the tensioner to move and the chain ran sideways on it. Visually it looks like it's made from the same metal/alloy. Expensive repair and this shouldn't happen at all. Disappointed in Honda to be honest.
@MrCommuterUG2564 ай бұрын
How hard bro was your riding?!!
@alext11332 жыл бұрын
Do you know if a 2014 nc750x motor would fit In a 2012 nc700x?
@ronfernandes2884 Жыл бұрын
I’m inclined to believe it’s the same because theses bikes are not like cars where they change all the hardware in the engine.
@agustinlopez12202 жыл бұрын
It took over 3 months to realice why the motorcycle vibrated,i took it to diferent mecanics til the honda dealer chanche the piece.
@ronfernandes2884 Жыл бұрын
Good for you bro 👍
@saskokirovski2 жыл бұрын
stupid ,you used T socket and impact on little bolts
@samuelalam75642 жыл бұрын
Hi is this in the UK ? If so how much was the replacement parts
@ronfernandes28842 жыл бұрын
No this is in Canada. and since this happened during covid and the dealership had no stock with a long lead time i got it off ebay(US) normally cost under CAD$100 - Paid just over with the shipping.
@gaborcsongradi10602 жыл бұрын
Hi. What was the sign that the dreamer was broken?
@ronfernandes28842 жыл бұрын
Yes the rattle was felt between 700~1500rpm - and quite easy to inspect once you open the valve cover.
@sidzephyr25193 жыл бұрын
Seems like a very bad design by Honda. For most motorcycles, the cam chain tensioner is EXTERNAL and can be replaced quite easily. This one is INTERNAL to the engine and is a shockingly bad design. Honda should pony up and pay for these cam chain tensioner replacements as it appears to be a metallurgy issue.
@ronfernandes28842 жыл бұрын
So true. The screw under the thermostat cannot be removed so you would need a slim wrench to get at it until you back off the threads holding the tensioner.
@taebert3 жыл бұрын
Thanks for the video. It’s very informative.
@ronfernandes28842 жыл бұрын
Glad it was helpful!
@1824reyes4 жыл бұрын
Do you have a video or sound of how it used to sound before you replace it?
@ronfernandes28843 жыл бұрын
I did not record that- I wish I did however.
@burakonthebike27993 жыл бұрын
@@ronfernandes2884 Hello Ron, I think I have similar problem. Could you listen and tell me if the noise was similar to yours? here is my video : streamable.com/046zpj
@ronfernandes28843 жыл бұрын
@@burakonthebike2799 Yes this is the exact sound - Your bike sounds worse than my bike - Pretty simple to fix - do not ride it on a long trip because the parts can breakoff and fall into the sump which may be harder to remove - For additional questions about replacement please do not hesitate to message me. BR. Ron
@este-ban3 жыл бұрын
@@burakonthebike2799 i pray for your bike man
@j.fernandes98844 жыл бұрын
Very well explained video, wish all videos were so detailed. Thanks for doing this.
@nutellamitpeanuts4 жыл бұрын
Hi, how old is your bike, and how many kilometers did your nc run ?
@ronfernandes28844 жыл бұрын
The Bike is a 2014 Honda NC750X and it had 25000km when I purchased it used. now it has aprox 40,000km.
Пікірлер
perfect.I need that chain tensioner. I'm from Peru and they don't sell them here.
If you find a good welder he can weld it for you - you can also source it from eBay
Webike...yo lo compre por $100 usd envío incluído...tardo 5 días en llegar a México
Hi, thank you for the video. It not necessary to remove the thermostat housing as the manual says?
Perfect 👌 thank you for video
Hallo, i have some noise, klicking-tapping when my NC 750X DCT is fully hot and not at cold starts. I'll give you a link just to hear the engine ad please tell me your opinion, cam tensioner failure, tappet clatter or normal. They seem to be noisy engines. What was the symptom of the tensioner failure ? Thank you. kzread.info/dash/bejne/Y52bm8uyY8ytk7g.html
I realise this is a fairly old video, but do you remember if you also had performance issues issues at the time? Appearing like the engine misfiring. Revs going up/down whilst just idling?
sorry for the late reply - yes it was inconsistently firing when idling.
What a guy! Completed most of this job one handed ❤
How did you diagnose the problem? How did you know that it was chain tensioner?
I opened the tappet cover several time before realizing that the plunger was not in the correct orientation _ I compared it to another video of someone adjusting the valve clearance.
Hola, porque sucede esto? . Tenemos un NC 750X 2020 CON 16.000 KM
Too bad you didn't record engine sound before and after cam chain tensioner replacement. It'd be helpful for many other NC riders.
yes that’s too bad I didn’t record that.
I'm shocked the tensioner broke. Have you heard of others breaking? There are NC owners with very high mileage and they haven't reported having this happen.
yes you’re right - even I wasn’t convinced that it was a broken tensioner at first. I’m guessing it may have been me riding it hard.
@@ronfernandes2884Mine broke around 14800 kilometers (~9200 miles). It didn't break exactly like this, but a little tab broke at the bottom which allowed the tensioner to move and the chain ran sideways on it. Visually it looks like it's made from the same metal/alloy. Expensive repair and this shouldn't happen at all. Disappointed in Honda to be honest.
How hard bro was your riding?!!
Do you know if a 2014 nc750x motor would fit In a 2012 nc700x?
I’m inclined to believe it’s the same because theses bikes are not like cars where they change all the hardware in the engine.
It took over 3 months to realice why the motorcycle vibrated,i took it to diferent mecanics til the honda dealer chanche the piece.
Good for you bro 👍
stupid ,you used T socket and impact on little bolts
Hi is this in the UK ? If so how much was the replacement parts
No this is in Canada. and since this happened during covid and the dealership had no stock with a long lead time i got it off ebay(US) normally cost under CAD$100 - Paid just over with the shipping.
Hi. What was the sign that the dreamer was broken?
Yes the rattle was felt between 700~1500rpm - and quite easy to inspect once you open the valve cover.
Seems like a very bad design by Honda. For most motorcycles, the cam chain tensioner is EXTERNAL and can be replaced quite easily. This one is INTERNAL to the engine and is a shockingly bad design. Honda should pony up and pay for these cam chain tensioner replacements as it appears to be a metallurgy issue.
So true. The screw under the thermostat cannot be removed so you would need a slim wrench to get at it until you back off the threads holding the tensioner.
Thanks for the video. It’s very informative.
Glad it was helpful!
Do you have a video or sound of how it used to sound before you replace it?
I did not record that- I wish I did however.
@@ronfernandes2884 Hello Ron, I think I have similar problem. Could you listen and tell me if the noise was similar to yours? here is my video : streamable.com/046zpj
@@burakonthebike2799 Yes this is the exact sound - Your bike sounds worse than my bike - Pretty simple to fix - do not ride it on a long trip because the parts can breakoff and fall into the sump which may be harder to remove - For additional questions about replacement please do not hesitate to message me. BR. Ron
@@burakonthebike2799 i pray for your bike man
Very well explained video, wish all videos were so detailed. Thanks for doing this.
Hi, how old is your bike, and how many kilometers did your nc run ?
The Bike is a 2014 Honda NC750X and it had 25000km when I purchased it used. now it has aprox 40,000km.
0:15 awesometeens.online