Great video. Question. How was your alignment numbers after the KSP UCA install? Did it provide more positive (higher) caster?
@that_f-1502 күн бұрын
I did not get a professional alignment after installing them so I can’t give you that info
@javierhernandez44563 күн бұрын
Good shit bro nice wiring💯💪
@alfredfree317 күн бұрын
In the beginning it showed you installing a 6” lift I think it was your 2nd video
@that_f-15016 күн бұрын
Yes and I’ve changed from that over a year ago. I just never posted a video about it
@alfredfree317 күн бұрын
Hey how did you fit 40’s on your 6”. I have a 6” with rough country 6” struts and a 1.5” puck. I had to add the puck after switching to a 6” strut to stop my 37x13.5 r20 with a 1.5-2” spacer to stop rubbing. I’m running gladiator comp my currently but wanted to get 38 or bigger
@that_f-15017 күн бұрын
I don’t have a 6” lift my truck is sitting at 11” of lift
@nevadaboy976921 күн бұрын
Damn you sure put alot of faith in that floor jack! the money you saved from the control arms you should invest in some jack stands, Safety first my friend!
@that_f-15020 күн бұрын
I own Jack stands and This exact Jack has sat under this truck holding it up for a week straight and didn’t budge an inch. It is 1000% safe how I am doing my work
@HectorMartinez-pb2fb22 күн бұрын
What’s the link for tiktok video
@DrPhilliam28 күн бұрын
Traction bars disappeared
@that_f-15028 күн бұрын
They are at powder coat with the rest of the lift
@drew588329 күн бұрын
Stunt wall or chrome wides?
@fhr429229 күн бұрын
Edgar gotta clean f1fitty
@toddjohnson7787Ай бұрын
Will this kit fit a 6in lifted 2023 Ford F-150 XLT?
@that_f-150Ай бұрын
Yes
@toddjohnson7787Ай бұрын
I couldn’t find any traction bars for my 2023 Rocky Ridge F-150 setup. Any suggestions?
@MrAWorthy1Ай бұрын
You’re a seriously talented guy my dude. Just found your channel today.
@grizzly168Ай бұрын
Did u finish the door pods?
@milesbachelor8747Ай бұрын
A dose of ibuprofen should help you recover from lifting a loaded MDF box.
@scottkinghorn9236Ай бұрын
I bought KSP upper control arms for my 2013 f150 and a 3 in ch leveling kit and the 32.25 inch tires on stock wheels rubbed on the control arms
@that_f-150Ай бұрын
That has everything to do with the offset of your rim
@BaSeBaLLnUgS419Ай бұрын
I wouldn't use moog. They used to be good, but their quality has gone way down. Maybe ttx has tie rods
@scamchan2 ай бұрын
Looks better than I thought it would. You got it going on!!
@Kqrsen2 ай бұрын
did an amazing job on explaining everything its gonna be so clean
@that_f-1502 ай бұрын
Thank you for your feedback man 🙏🏽
@5564EVR2 ай бұрын
I read KSP's installation instructions, and it states the adjustable end of the traction bars are located on the rear axle of the vehicle. Did they recently change the orientation, or did you purposely install yours backwards?
@that_f-1502 ай бұрын
I installed it this way because of how big my tires are it hid the logo so I flipped them this way so that you can read the ksp logo
@5564EVR2 ай бұрын
@@that_f-150 Gotcha. I'm going to order some for 2013 F150, thanks for posting the video.
@Dawson55892 ай бұрын
Can you use these without it making your truck higher I just need new control arms
@that_f-1502 ай бұрын
They are for 2-4” lifts so yes you can
@nevadaboy976921 күн бұрын
These are designed to bring your ball joint angles back to within factory spec if you have a 2 to 4" lift, if you are less than 2 inches of lift you Do Not want to use raised control arms! you will never be able to align it properly!
@ISTEWART6262 ай бұрын
Damnnnn your set up looks good when it’s all put together bro 🔥🦾🔥
@that_f-1502 ай бұрын
Thank you very much🙏🏽 still waiting for the back glass speaker rack to be delivered and it’s gonna be insane
@newenglandoutdoors92 ай бұрын
Will fourwheel drive come back with the big lift.
@that_f-1502 ай бұрын
Yes it will ‼️
@jeremywolf54802 ай бұрын
😮 1:18 @@that_f-150
@jeremywolf54802 ай бұрын
2:00
@kentjohnson82662 ай бұрын
What is your current suspension setup? What all is stacked to get it that tall?
@landynaucoin402 ай бұрын
Yo what’s your gas mileage looking like right now with your current set up?
@that_f-1502 ай бұрын
From 4-9 mpg depending how I drive
@kentjohnson82662 ай бұрын
What all is stacked on top of that standard lift. I’m just wanting to put a 1” thick leveling spacer on top of my N3 6” struts and hoping my angles will be decent
@BLKnPrd672 ай бұрын
Sweet build bro ✊🏿
@that_f-1502 ай бұрын
Appreciate it
@dirkdig36282 ай бұрын
Should of retrofitted a led projector in the headlights so you can at least see when you drive at night
@that_f-1502 ай бұрын
Only reason why I didn’t is because I have 2 20” inch light bars in my bumper that light up the entire road in front of me
@cloudz73202 ай бұрын
Seen this truck on tiktok, glad ur making yt vids!
@J-Icey2 ай бұрын
From my personal experience with those type of tail lights with those type of resistors they go out after a few months but when they do just wire in some regular resistors and they should last, no hate but just trying to let you know
@michaelgoudy-joseph9132 ай бұрын
All the hard work will be a blessing to see keep up the good work I can't wait to see it
@Kqrsen2 ай бұрын
Love watching the process of this build
@BaSeBaLLnUgS4192 ай бұрын
How much do you want for your old loft kit??
@ernestanger31772 ай бұрын
Haha what a clown free humongous bank account advertising her free shit. 🤣🤣💀
@Ford-ified2 ай бұрын
Do the back crossbar in chrome too. Match the front
@homiefellas2 ай бұрын
14 Inches is Crazyyy
@truckingwithperry57992 ай бұрын
Hey brother I have a question Are you selling the one you taken off? And what state are you in? Because I live in Florida but I drive a semi. I can pick it up. I have a 2011 F150, so let me know.
@justaguy4real2 ай бұрын
truck looks good. i sure hope you adjusted your headlights. cant stand those guys blinding everyone. whrd you get the cables and stuff?
@miatagod803 ай бұрын
Buy a knife. Dang dude. You need an OTF handy.
@that_f-1503 ай бұрын
I had a OTF knife and had it sharpened and they broke it
@re94733 ай бұрын
What paint company did you use for the blue?
@joepatcity83203 ай бұрын
kzread.infoEHJGMqFa-CI?si=3xrHlrb5IvjcqAD3 Your video is why I bought these thanks for making it.
@user-lf3ym5uy7y3 ай бұрын
Im running a 6' lift . I noticed that most control arms say for 2 to 4 inch lifts . The sellers say only for 2/4 inch lift. Will they work on my 6' lift.
@that_f-1503 ай бұрын
Yes they will I’m running these “2-4” on an 11” lift
@johnalbracht36103 ай бұрын
Hey man I have a 6 inch rough country lift and I’m looking to go taller. Probably going to get the vertex coil overs and stack a level on top. Is this what you did to get that high? Or what else can be done?
@DrPhilliam3 ай бұрын
Do you know how big you made the actual ring? I’m trying to figure out if I can just buy them prebuilt, but I don’t want them to not fit
@that_f-1503 ай бұрын
I don’t know the exact size of the ring
@ethansmith59243 ай бұрын
I have a question I’m still confused on how u wired all 50 sum rock light to the one box or how ever u did it I want to do the same setup but I don’t know how u wired all of the lift to. One box
@berylzhou72363 ай бұрын
do you have email or IG? HERE ARE BUSINESS INQUIRY
Пікірлер
WAZ🤣🤣🤣🤣🤣🤣🤣🤣
idk what’s uglier you or ur truck
Great video. Question. How was your alignment numbers after the KSP UCA install? Did it provide more positive (higher) caster?
I did not get a professional alignment after installing them so I can’t give you that info
Good shit bro nice wiring💯💪
In the beginning it showed you installing a 6” lift I think it was your 2nd video
Yes and I’ve changed from that over a year ago. I just never posted a video about it
Hey how did you fit 40’s on your 6”. I have a 6” with rough country 6” struts and a 1.5” puck. I had to add the puck after switching to a 6” strut to stop my 37x13.5 r20 with a 1.5-2” spacer to stop rubbing. I’m running gladiator comp my currently but wanted to get 38 or bigger
I don’t have a 6” lift my truck is sitting at 11” of lift
Damn you sure put alot of faith in that floor jack! the money you saved from the control arms you should invest in some jack stands, Safety first my friend!
I own Jack stands and This exact Jack has sat under this truck holding it up for a week straight and didn’t budge an inch. It is 1000% safe how I am doing my work
What’s the link for tiktok video
Traction bars disappeared
They are at powder coat with the rest of the lift
Stunt wall or chrome wides?
Edgar gotta clean f1fitty
Will this kit fit a 6in lifted 2023 Ford F-150 XLT?
Yes
I couldn’t find any traction bars for my 2023 Rocky Ridge F-150 setup. Any suggestions?
You’re a seriously talented guy my dude. Just found your channel today.
Did u finish the door pods?
A dose of ibuprofen should help you recover from lifting a loaded MDF box.
I bought KSP upper control arms for my 2013 f150 and a 3 in ch leveling kit and the 32.25 inch tires on stock wheels rubbed on the control arms
That has everything to do with the offset of your rim
I wouldn't use moog. They used to be good, but their quality has gone way down. Maybe ttx has tie rods
Looks better than I thought it would. You got it going on!!
did an amazing job on explaining everything its gonna be so clean
Thank you for your feedback man 🙏🏽
I read KSP's installation instructions, and it states the adjustable end of the traction bars are located on the rear axle of the vehicle. Did they recently change the orientation, or did you purposely install yours backwards?
I installed it this way because of how big my tires are it hid the logo so I flipped them this way so that you can read the ksp logo
@@that_f-150 Gotcha. I'm going to order some for 2013 F150, thanks for posting the video.
Can you use these without it making your truck higher I just need new control arms
They are for 2-4” lifts so yes you can
These are designed to bring your ball joint angles back to within factory spec if you have a 2 to 4" lift, if you are less than 2 inches of lift you Do Not want to use raised control arms! you will never be able to align it properly!
Damnnnn your set up looks good when it’s all put together bro 🔥🦾🔥
Thank you very much🙏🏽 still waiting for the back glass speaker rack to be delivered and it’s gonna be insane
Will fourwheel drive come back with the big lift.
Yes it will ‼️
😮 1:18 @@that_f-150
2:00
What is your current suspension setup? What all is stacked to get it that tall?
Yo what’s your gas mileage looking like right now with your current set up?
From 4-9 mpg depending how I drive
What all is stacked on top of that standard lift. I’m just wanting to put a 1” thick leveling spacer on top of my N3 6” struts and hoping my angles will be decent
Sweet build bro ✊🏿
Appreciate it
Should of retrofitted a led projector in the headlights so you can at least see when you drive at night
Only reason why I didn’t is because I have 2 20” inch light bars in my bumper that light up the entire road in front of me
Seen this truck on tiktok, glad ur making yt vids!
From my personal experience with those type of tail lights with those type of resistors they go out after a few months but when they do just wire in some regular resistors and they should last, no hate but just trying to let you know
All the hard work will be a blessing to see keep up the good work I can't wait to see it
Love watching the process of this build
How much do you want for your old loft kit??
Haha what a clown free humongous bank account advertising her free shit. 🤣🤣💀
Do the back crossbar in chrome too. Match the front
14 Inches is Crazyyy
Hey brother I have a question Are you selling the one you taken off? And what state are you in? Because I live in Florida but I drive a semi. I can pick it up. I have a 2011 F150, so let me know.
truck looks good. i sure hope you adjusted your headlights. cant stand those guys blinding everyone. whrd you get the cables and stuff?
Buy a knife. Dang dude. You need an OTF handy.
I had a OTF knife and had it sharpened and they broke it
What paint company did you use for the blue?
kzread.infoEHJGMqFa-CI?si=3xrHlrb5IvjcqAD3 Your video is why I bought these thanks for making it.
Im running a 6' lift . I noticed that most control arms say for 2 to 4 inch lifts . The sellers say only for 2/4 inch lift. Will they work on my 6' lift.
Yes they will I’m running these “2-4” on an 11” lift
Hey man I have a 6 inch rough country lift and I’m looking to go taller. Probably going to get the vertex coil overs and stack a level on top. Is this what you did to get that high? Or what else can be done?
Do you know how big you made the actual ring? I’m trying to figure out if I can just buy them prebuilt, but I don’t want them to not fit
I don’t know the exact size of the ring
I have a question I’m still confused on how u wired all 50 sum rock light to the one box or how ever u did it I want to do the same setup but I don’t know how u wired all of the lift to. One box
do you have email or IG? HERE ARE BUSINESS INQUIRY
24 rocket lights ?
56 rock lights
That’s sick what are the wheel and tires
He’s taping himself 😂 how rude