The predrain did nothing for me. Nothing came out… but i got bout 2 gallons from the filter tho…
@CarlosLopez-hk4lg18 сағат бұрын
Bad guitar music playing, ugly nails. tip about washing machine 6 out of 10z.
@morongovalley9404 күн бұрын
i thought this was going to be more complex
@jovemarbz59596 күн бұрын
not bad for a 106 year old man. and I love the soundtrack
@jessedybenko82356 күн бұрын
Mine had some sand and gravel trapped at the entrance to the filter area between the machine and the filter. Threads were pretty clean but I think it was the gravel at the back that prevented the rubber seal from compressing fully. Thanks for this video! My wife was ready to call a plumber / repairman
@user-tg1yj5pi7j9 күн бұрын
Brother, you are not alone in this universe! kzread.info/dash/bejne/moGW2cmMnsScZNI.html
@Grimtheorist9 күн бұрын
Graffiti* Nice work!
@EurekaRecycler11 күн бұрын
see original Installation video kzread.info/dash/bejne/qnxsyNmmpsSWabQ.html
@rand0mST4RY11 күн бұрын
He2T F28 code- First tried to replace door lock mechanism and checked wiring, still didn’t work. Replaced motor control board with a used part that matched the serial number. Now makes a clicking kinda sound when spinning, but it’s working again!
@rand0mST4RY9 күн бұрын
Update, no longer clicking sound. Still works.
@WendellTurner-xf3zu27 күн бұрын
❤
@WendellTurner-xf3zu27 күн бұрын
Thank you so much. Using the screw driver fixed my problem! Awesome Video!!!
@danmoloney6966Ай бұрын
Couldn't see a fuckin thing!
@chriskaramanos7972Ай бұрын
Screwdriver in the door fixed it!
@boringboringboringboringАй бұрын
How many microziverts did the dozimeter show?
@roberthance24122 ай бұрын
LOL, dude please stop , if the ignitor breaks you do not have to buy a new stove , there is nothing on this stove or any other stove that breaks that would cause you to buy a new stove . Stop putting out fake news you will get further being a honest service tech than you will being lazy or trying to scam people ..
@roberthance24122 ай бұрын
That stove is in need of TLC . I have fixed this issue hundreds of times and this is something that any owner can and should be doing on a regular basis , this video does not come close to covering the issues shown .
@acecombatter66202 ай бұрын
How did you remove the bottom of the oven to get that fantastic access? Do you have a video for that?
@EurekaRecycler2 ай бұрын
stay tuned I will post soon
@gmartinez19812 ай бұрын
Screwdriver counter bend worked immediately! Thanks!
@SavedbyJesus12 ай бұрын
Thank you for saving me money!🎉🙏🏻👍🏼
@lindajordan68772 ай бұрын
I couldn’t figure out what it was you were repairing that gosh, awful music turned me off, in other words I can’t understand anything that’s going on with that gosh awful music on so if nobody subscribed it’s because of the noisy music or whatever you call it
@EurekaRecycler2 ай бұрын
Thank you for your comment , now I challenge you to make a better video and leave your link, Peace
@lindaburgos89293 ай бұрын
It worked! Thank You
@lespauljunky743 ай бұрын
Bro…the screwdriver trick. Holy cow. Saved the day. Thank you thank you!!
@GuillermoGonzalezBravo3 ай бұрын
Tengo uno de esos 👍
@daviddominguez68488 күн бұрын
Cómo funciona bro
@randykelly56924 ай бұрын
Probably drug addicts
@ricosuave51204 ай бұрын
A thick asparagus stalk can be jammed inside a small bulb base, and turned out.
@jakeb.79974 ай бұрын
So….what’s the problem exactly. I think most of these were just traffic stops ^^;
@EurekaRecycler4 ай бұрын
kzread.info/dash/bejne/hGlsuJWboLSWerg.html
@jakeb.79974 ай бұрын
@@EurekaRecycler no I mean what’s the problem? You can link a video all you want I’m just asking you a question ^^; Actually I checked and…..you linked me to the video I’m already watching
@beemikeme4 ай бұрын
Your voice sounds like you inhaled some helium.
@mick57404 ай бұрын
My 89 leaking oil pretty good from valve cover I think.
@shawntistorm56654 ай бұрын
When I saw this I thought "NO FUCKING WAY!!" I inspected all of the hoses, took the machine apart, picked out a new one....tried this AND IT FUCKING WORKED!!!! there were small bits of sand or gravel breaking the seal, wiped it all down and IT WORKED!!! THANK YOU <3
@josetteadams78695 ай бұрын
Thank you for helping me get my dry. You up to clothes now? A greatly appreciate device.
@TheDroc19905 ай бұрын
Are you still in business?
@EurekaRecycler5 ай бұрын
Why? bastech72588 @ gmail
@TheDroc19905 ай бұрын
@@EurekaRecycler interested in videos/coaching etc. Thanks
@EurekaRecycler5 ай бұрын
plez email me bastech72588 @ gmail@@TheDroc1990
@Beechwood619535 ай бұрын
Stupid video
@fernandotapia95115 ай бұрын
Man ...all that time wasted. Sorry sometimes it happens
@angieforce19786 ай бұрын
Can you show how to take the top off the washer please.
@bfsgman6 ай бұрын
Do you really expect people to listen to you over that loud and distracting guitar? People come to KZread to watch and listen to videos, not to read a transcript. Adding that guitar was completely dumb and useless.
@TheWilferch6 ай бұрын
I also have an "end-of-cycle" button but ALL it does is sound an alarm or the alarm is "off". Shouldn't you be able to tell if it's the timer or this switch?...by simply setting the timer to (say) a 10 minute run....and if the time-remaining indicator does not move after 5-8 minutes.....wouldn't that direct you to a timer problem instead of an "end-of-cycle" switch? Meaning..... even if the end-of-cycle switch was bad, shouldn't you see ( or NOT see) the time-remaining if its changing or not ????
@Hugh_Bastards6757 ай бұрын
What is wrong witj you yankees get rid of the music plz
@ninjashrine02927 ай бұрын
im a bit late but its a common meadow mushroom😄
@mpop2597 ай бұрын
Have the issue. Couple of folks have asked what size screws did you use. It would really helpful. Thanks for posting this.
@EurekaRecycler7 ай бұрын
use your logic, or what ever fits nicely
@EurekaRecycler8 ай бұрын
see part 2 kzread.info/dash/bejne/gZOG0dKseZitf6g.html
@sentino688 ай бұрын
A sample call showing how the captions show would have been nice.
@EurekaRecycler8 ай бұрын
its out there, otherwise feel free to leave a link
@lizloukiss9 ай бұрын
You are amazing! Thank you so much! My dryer wasn’t shutting after I leaned on it while I was unloading my kids clothes. I came to KZread and found your video, tried your screwdriver suggestion and immediately fixed my problem! Thank you so much! So awesome to see you’re in Eureka. I have a bunch of family that lives in Eureka.
@allisonsitter93869 ай бұрын
My problem is there is water in my filter. What do I do?
@EurekaRecycler9 ай бұрын
Did you try the Drain Tube? if clogged I suck the excess water out , and or tip back so most of the water is not near the pump. be careful water may damage your floor and i can not be responsible for what you do. Thank you
@EurekaRecycler9 ай бұрын
so Did you try the drain tube in front by the filter? Or suck the water out with a shop vac or get most of it out and tilt it back so you can put a bucket under it
@EurekaRecycler10 ай бұрын
Clean it well, use E600 glue and put some small sheet metal screws in, what ever works, in this case it has held up about 1-2 years .
@derekwells420110 ай бұрын
That means you’re battery is bad
@maverick187jm10 ай бұрын
What size sheet metal screws did you use?
@2kBofFun10 ай бұрын
The X-ray in the title is pure clickbait. What you can measure is the magnetic field from the coils. Which is not harmfull, and comparable to the field from a speaker. In-Ear headphones are probably more dangerous than this.
@scottratcliffe75011 ай бұрын
I had the smallest piece of jewelry at the very back of the recess where the filter enters, it stopped the filter tightening properly. Water flooded the kitchen 😢. Make sure every little piece of rubbish is removed from threads and recess. Also you will know when the filter tightens properly, it stops turning completely without much effort....
@joseeduardoacourilopez326511 ай бұрын
Cuando mi maquina wascomat entra en sentrigudado...se mueve como demonio (vibracion) mi modelo no lleva amortiguadores.
Пікірлер
The predrain did nothing for me. Nothing came out… but i got bout 2 gallons from the filter tho…
Bad guitar music playing, ugly nails. tip about washing machine 6 out of 10z.
i thought this was going to be more complex
not bad for a 106 year old man. and I love the soundtrack
Mine had some sand and gravel trapped at the entrance to the filter area between the machine and the filter. Threads were pretty clean but I think it was the gravel at the back that prevented the rubber seal from compressing fully. Thanks for this video! My wife was ready to call a plumber / repairman
Brother, you are not alone in this universe! kzread.info/dash/bejne/moGW2cmMnsScZNI.html
Graffiti* Nice work!
see original Installation video kzread.info/dash/bejne/qnxsyNmmpsSWabQ.html
He2T F28 code- First tried to replace door lock mechanism and checked wiring, still didn’t work. Replaced motor control board with a used part that matched the serial number. Now makes a clicking kinda sound when spinning, but it’s working again!
Update, no longer clicking sound. Still works.
❤
Thank you so much. Using the screw driver fixed my problem! Awesome Video!!!
Couldn't see a fuckin thing!
Screwdriver in the door fixed it!
How many microziverts did the dozimeter show?
LOL, dude please stop , if the ignitor breaks you do not have to buy a new stove , there is nothing on this stove or any other stove that breaks that would cause you to buy a new stove . Stop putting out fake news you will get further being a honest service tech than you will being lazy or trying to scam people ..
That stove is in need of TLC . I have fixed this issue hundreds of times and this is something that any owner can and should be doing on a regular basis , this video does not come close to covering the issues shown .
How did you remove the bottom of the oven to get that fantastic access? Do you have a video for that?
stay tuned I will post soon
Screwdriver counter bend worked immediately! Thanks!
Thank you for saving me money!🎉🙏🏻👍🏼
I couldn’t figure out what it was you were repairing that gosh, awful music turned me off, in other words I can’t understand anything that’s going on with that gosh awful music on so if nobody subscribed it’s because of the noisy music or whatever you call it
Thank you for your comment , now I challenge you to make a better video and leave your link, Peace
It worked! Thank You
Bro…the screwdriver trick. Holy cow. Saved the day. Thank you thank you!!
Tengo uno de esos 👍
Cómo funciona bro
Probably drug addicts
A thick asparagus stalk can be jammed inside a small bulb base, and turned out.
So….what’s the problem exactly. I think most of these were just traffic stops ^^;
kzread.info/dash/bejne/hGlsuJWboLSWerg.html
@@EurekaRecycler no I mean what’s the problem? You can link a video all you want I’m just asking you a question ^^; Actually I checked and…..you linked me to the video I’m already watching
Your voice sounds like you inhaled some helium.
My 89 leaking oil pretty good from valve cover I think.
When I saw this I thought "NO FUCKING WAY!!" I inspected all of the hoses, took the machine apart, picked out a new one....tried this AND IT FUCKING WORKED!!!! there were small bits of sand or gravel breaking the seal, wiped it all down and IT WORKED!!! THANK YOU <3
Thank you for helping me get my dry. You up to clothes now? A greatly appreciate device.
Are you still in business?
Why? bastech72588 @ gmail
@@EurekaRecycler interested in videos/coaching etc. Thanks
plez email me bastech72588 @ gmail@@TheDroc1990
Stupid video
Man ...all that time wasted. Sorry sometimes it happens
Can you show how to take the top off the washer please.
Do you really expect people to listen to you over that loud and distracting guitar? People come to KZread to watch and listen to videos, not to read a transcript. Adding that guitar was completely dumb and useless.
I also have an "end-of-cycle" button but ALL it does is sound an alarm or the alarm is "off". Shouldn't you be able to tell if it's the timer or this switch?...by simply setting the timer to (say) a 10 minute run....and if the time-remaining indicator does not move after 5-8 minutes.....wouldn't that direct you to a timer problem instead of an "end-of-cycle" switch? Meaning..... even if the end-of-cycle switch was bad, shouldn't you see ( or NOT see) the time-remaining if its changing or not ????
What is wrong witj you yankees get rid of the music plz
im a bit late but its a common meadow mushroom😄
Have the issue. Couple of folks have asked what size screws did you use. It would really helpful. Thanks for posting this.
use your logic, or what ever fits nicely
see part 2 kzread.info/dash/bejne/gZOG0dKseZitf6g.html
A sample call showing how the captions show would have been nice.
its out there, otherwise feel free to leave a link
You are amazing! Thank you so much! My dryer wasn’t shutting after I leaned on it while I was unloading my kids clothes. I came to KZread and found your video, tried your screwdriver suggestion and immediately fixed my problem! Thank you so much! So awesome to see you’re in Eureka. I have a bunch of family that lives in Eureka.
My problem is there is water in my filter. What do I do?
Did you try the Drain Tube? if clogged I suck the excess water out , and or tip back so most of the water is not near the pump. be careful water may damage your floor and i can not be responsible for what you do. Thank you
so Did you try the drain tube in front by the filter? Or suck the water out with a shop vac or get most of it out and tilt it back so you can put a bucket under it
Clean it well, use E600 glue and put some small sheet metal screws in, what ever works, in this case it has held up about 1-2 years .
That means you’re battery is bad
What size sheet metal screws did you use?
The X-ray in the title is pure clickbait. What you can measure is the magnetic field from the coils. Which is not harmfull, and comparable to the field from a speaker. In-Ear headphones are probably more dangerous than this.
I had the smallest piece of jewelry at the very back of the recess where the filter enters, it stopped the filter tightening properly. Water flooded the kitchen 😢. Make sure every little piece of rubbish is removed from threads and recess. Also you will know when the filter tightens properly, it stops turning completely without much effort....
Cuando mi maquina wascomat entra en sentrigudado...se mueve como demonio (vibracion) mi modelo no lleva amortiguadores.
I need help , do you have a e-mail ?