Want to sell your old suspension to me? Looking to refresh my s60r
@rafalotkowski2127Күн бұрын
Hey, Fantastic Movie! Thanks for upload your work for us and thanks that you share your beautiful Volvo, could you upload and write me where can I find this sick headlights, i would change mine for this also :)
@jsc12272 күн бұрын
Your very methodical in your repairs, i would be scared of some of these upgrades but you seem very confident with every surgery
@southernvtgrown2 күн бұрын
I love my volvo sooooo much, i need to keep working on mine.. 06 xc70 really nice clean, 220k just had head gasket replaced and yeah......water in the oil, oil in the antifreeze...I am guessing they messed up some where, car drove about 400miles and then did not sound or perform right. i torn the top end down yesterday and almost ready to lift the head....When i removed the cam cover i knoticed tons of carbon buildt up near both edges piston 1 and 5 maybe?. So must be the cylinders exhaust is getting into head as well. This is my first volvo rebuild. I am hoping everything is fine with bottom end. My motor is in car and i was hoping to not remove and replace.
@southernvtgrown2 күн бұрын
Hoping to pull the head completely off today and see the cylinder walls and and head domes, I guess run a couple oil changes after rebuild, and clean rest water out of here and there. I do not want to get into pulling the pan. Any pointers to look for or address along the way appreciated. Disabled and working in the grass, would probably be 100% times easier to remove and rebuild I know 😅
@richard343s2 күн бұрын
This is really impressive. Are you a professional mechanic or something?
@oxygenfy43453 күн бұрын
Bro where u at
@b4aftermatch2573 күн бұрын
great job and i think you forgot to put in a new crankshaft seal cause you reinstall the thf GS gears and there was no crankshaft seal on the oil pump housing and it fell in to easy the way you install it without a prober tool. hope you catch that before you put the engine back and cause more oil leaks on the effort you put in . its just my opinion. good luck
@b4aftermatch2573 күн бұрын
great job and video
@arnoldvanblanken25944 күн бұрын
Did the same job on a C70 T5, the delrin bushings are worth every penny!
@josephcote77025 күн бұрын
the new car is an MR2, isn't it?
@jacksonueland5 күн бұрын
This is a fun idea, nice work
@chenosequeponer5 күн бұрын
Hermoso proyecto Congratulations
@PaneInTheGlass5 күн бұрын
so is it possible to have a clunking in the subframe? I have literally changed everything besides the subframe bushings and still have a clunking sound. It isn't as bad since everything else has been changed out but I still have a clunk and it is driving me mad lmfao. my car is just shy of 204k miles so it was on my to do list anyway.. I just hope thats the clunk lol
@melvinstrid29766 күн бұрын
WHERE ARE YOU MAN
@thestigseuropeancousin79416 күн бұрын
Where are you bro? We miss you 😅
@openwidesky6 күн бұрын
Great vids dude. I've owned and maintained swedish cars since 1987. No vids back then, just Haynes manuals that were more confusing than a jigsaw puzzle. 4 Saabs and 4 Volvos later I still love working on my P2 chassis '07 S60 and '07 V70. While I'm not a professional mechanic I have worked on Asian and American cars. I really dig how you limit the talk to specifics and your eloquence, not to mention cool background music. I would be more likely to play Otep as background but hey I'm enjoying the vids.
@ESPirits876 күн бұрын
Volvo Turbo 5 makes a fine sound.
@tomehCanada7 күн бұрын
Sweet. My favourite car of all time the V70. Mine was totalled by a Chevy SUV that tried to run over it in an intersection. :-( Great job.
@gbresaleking7 күн бұрын
Do you have a tune too or just the parts that we saw you install in this video?
@Csapi0078 күн бұрын
Where you at??? :(
@HhhGggg-rz7bu8 күн бұрын
Will you reseal the angle gear? Based on what I saw, it looks like it is leaking.
@arkadiuszwojno52109 күн бұрын
its way too loud, unconfortable
@EvilestGem9 күн бұрын
Subbed and I'll be getting one of those jerseys! (Provided there's post to Ireland!). Awesome video my friend keep going! Love it.
@zer00rdie9 күн бұрын
waste of money
@lolilolplix11 күн бұрын
Doesn’t the car throw error codes as you removed the EC dampers? I would think a new set of OE dampers would be preferable over BC Racing stuff…I may be biased working for the shocks developer 😄
@huntermcmurray932611 күн бұрын
When you gonna put out new videos bro
@tritnaha134511 күн бұрын
10 points for looking like a Swedish boyband-member from the late 90s. 5/5 would watch backstreet volvoboy build again.
@alejandroalvarez993611 күн бұрын
Hi, my friend. I recently bought a 2008 Volvo S60 2.0T with 60,000 miles and all the maintenance records. However, the engine fan is not turning on after using the car. When I switch off the car, I can hear the coolant boiling. What do you think I could do
@gtheskater11 күн бұрын
Look at this, downshifts whenever I want! - genuine reaction of the discovery of manual transmission
@user-gl7fz7cp6r12 күн бұрын
классный чемодан. Видео продакшен тоже, музыка кадры - супер!
@a34rwl13 күн бұрын
Are you in BTS?
@user-lg8gl7rb3o13 күн бұрын
czejść czy możesz udostępnić dane jakie turbo intelkuler jakiej marki kupić do volvo xc70 v70 4x4 2,4 silnik b5244t daj znać właśnie swoje volvo naprawiam.
@jimboprzza13 күн бұрын
i see you have volvo ocd most owners suffer from some form of this me included haha
@MatthewBrigham-113 күн бұрын
You’re doing great man! Excellent video
@AlecMoody13 күн бұрын
I was fixing an exhaust rattle on my v70r and I saw that bracket of doom or whatever and assumed I was like missing a hanger or it was something incorrect with the aftermarket exhaust design. It seemed impossible that an exhaust was ever supposed just rest on a bracket like that.
@tambosnipes165214 күн бұрын
Only a guy who is 19 will do tgis
@RobinLARSSON-jx9je14 күн бұрын
whats the size of the hoes you got at 7:35 the red,blue and the yellow one, also what size is it on the hoes that connect to the grey rounded thing just above the rest?
@haziyo14 күн бұрын
Where did u go
@jasonwebb596414 күн бұрын
I've had to do the coil harness replacement as well. Dave Barton to the rescue!
@OBH-dg9bj15 күн бұрын
This young man is an organized genius . very sober and informative knowledge . I would say , He is a meticulous teacher who simplifies the most complicated . I own an XC 70 and l wish He was my neighbor . l would gladly give him my car to work on with total peace of mind . I wish you the best of success young man. Thank you for this great video and photography .
@gerardjones788115 күн бұрын
I was going to do all that until I saw the cost in parts. I bought a maxjax M7K lift instead, after I pay that off I'll start buying parts. With subframe out of the way its a great time to swap the power steering lines if theyre original.
@jasonwebb596415 күн бұрын
So glad I found this channel. Im in the process of stockpiling parts for my own R build. Ive got a bone stock 2005 6 speed S60R with 144k that ive had since 2017. I had a buddy who was a Volvo master tech go through it and it ran trouble free until a little over a year ago. I developed a misfire I couldn't track and I've decided to now is as good a time as any to build it the way ive always wanted to. I plan on doing most of the upgrades as this guy, minus the manual swap, so I'll be coming back to these videos over and over again. 👍🏻
@TheHagamanstube16 күн бұрын
The sound of your car is really childish. it's a nice respected brand and its a station car. putting that exaust on it, that makes such a terrible kit car sound makes it a junk for 14 years old. the sounds does not come from the engine, but from a bad exaust. that makes it cheap and childish. check the sounds of a really powerfull cars, they sound different not like this.
@_rats536416 күн бұрын
Where do you get your shirts Willem, I REALLY need shirts like that man
@workingTchr17 күн бұрын
I have 06 V70 with the same engine. I see you didn't do the timing belt. At 120K that's recommended service. Also the fuel filter is supposed to be done. I didn't know changing the plugs or oil would be so easy. Getting the spark plugs changed gave it a nice boost and I read some guy saying that a fuel filter change he did on his V70 also gave a few extra HP!
@tcb_66617 күн бұрын
$3K for all those major repairs is a steal in my eyes! I own a 2006 Mazda 3 rn and in my 2 years of ownership have spent just under $9K on both major and random shit, not including replacing all of the fluids, filters, plugs and so on. And all I have to show for it is a knocking engine, aftermarket engine mounts and sway bars. I think imma get a S60R 😅
@lifelong542518 күн бұрын
No more to say or Do...?..
@David-vt4nq18 күн бұрын
Awesome job fella🙏love those wheels
@sku11y2618 күн бұрын
Thats so funny I didnt know my boy sanders was the one who tuned your car till I rewatched lol. Happy to see the progress on the R!
@peterkowlessar782318 күн бұрын
Excellent video. I really enjoyed it. I changed the spark plugs for the first time on my 2005 XC70. I did not remove the strut bar as could get a 1/4" ratchet under the turbo pipe. Like you, my plugs 1 and 5 snapped in half on removal. The previous owner had Bosch Platinums x 4 and one NGK installed 🤷🏾♂️. The oil change I do mine the same way but since I do not have a garage or even a driveway I let my mechanic tackle the strut mounts. When I first got the car the first service they did the ATF and the top engine mount.
Пікірлер
Want to sell your old suspension to me? Looking to refresh my s60r
Hey, Fantastic Movie! Thanks for upload your work for us and thanks that you share your beautiful Volvo, could you upload and write me where can I find this sick headlights, i would change mine for this also :)
Your very methodical in your repairs, i would be scared of some of these upgrades but you seem very confident with every surgery
I love my volvo sooooo much, i need to keep working on mine.. 06 xc70 really nice clean, 220k just had head gasket replaced and yeah......water in the oil, oil in the antifreeze...I am guessing they messed up some where, car drove about 400miles and then did not sound or perform right. i torn the top end down yesterday and almost ready to lift the head....When i removed the cam cover i knoticed tons of carbon buildt up near both edges piston 1 and 5 maybe?. So must be the cylinders exhaust is getting into head as well. This is my first volvo rebuild. I am hoping everything is fine with bottom end. My motor is in car and i was hoping to not remove and replace.
Hoping to pull the head completely off today and see the cylinder walls and and head domes, I guess run a couple oil changes after rebuild, and clean rest water out of here and there. I do not want to get into pulling the pan. Any pointers to look for or address along the way appreciated. Disabled and working in the grass, would probably be 100% times easier to remove and rebuild I know 😅
This is really impressive. Are you a professional mechanic or something?
Bro where u at
great job and i think you forgot to put in a new crankshaft seal cause you reinstall the thf GS gears and there was no crankshaft seal on the oil pump housing and it fell in to easy the way you install it without a prober tool. hope you catch that before you put the engine back and cause more oil leaks on the effort you put in . its just my opinion. good luck
great job and video
Did the same job on a C70 T5, the delrin bushings are worth every penny!
the new car is an MR2, isn't it?
This is a fun idea, nice work
Hermoso proyecto Congratulations
so is it possible to have a clunking in the subframe? I have literally changed everything besides the subframe bushings and still have a clunking sound. It isn't as bad since everything else has been changed out but I still have a clunk and it is driving me mad lmfao. my car is just shy of 204k miles so it was on my to do list anyway.. I just hope thats the clunk lol
WHERE ARE YOU MAN
Where are you bro? We miss you 😅
Great vids dude. I've owned and maintained swedish cars since 1987. No vids back then, just Haynes manuals that were more confusing than a jigsaw puzzle. 4 Saabs and 4 Volvos later I still love working on my P2 chassis '07 S60 and '07 V70. While I'm not a professional mechanic I have worked on Asian and American cars. I really dig how you limit the talk to specifics and your eloquence, not to mention cool background music. I would be more likely to play Otep as background but hey I'm enjoying the vids.
Volvo Turbo 5 makes a fine sound.
Sweet. My favourite car of all time the V70. Mine was totalled by a Chevy SUV that tried to run over it in an intersection. :-( Great job.
Do you have a tune too or just the parts that we saw you install in this video?
Where you at??? :(
Will you reseal the angle gear? Based on what I saw, it looks like it is leaking.
its way too loud, unconfortable
Subbed and I'll be getting one of those jerseys! (Provided there's post to Ireland!). Awesome video my friend keep going! Love it.
waste of money
Doesn’t the car throw error codes as you removed the EC dampers? I would think a new set of OE dampers would be preferable over BC Racing stuff…I may be biased working for the shocks developer 😄
When you gonna put out new videos bro
10 points for looking like a Swedish boyband-member from the late 90s. 5/5 would watch backstreet volvoboy build again.
Hi, my friend. I recently bought a 2008 Volvo S60 2.0T with 60,000 miles and all the maintenance records. However, the engine fan is not turning on after using the car. When I switch off the car, I can hear the coolant boiling. What do you think I could do
Look at this, downshifts whenever I want! - genuine reaction of the discovery of manual transmission
классный чемодан. Видео продакшен тоже, музыка кадры - супер!
Are you in BTS?
czejść czy możesz udostępnić dane jakie turbo intelkuler jakiej marki kupić do volvo xc70 v70 4x4 2,4 silnik b5244t daj znać właśnie swoje volvo naprawiam.
i see you have volvo ocd most owners suffer from some form of this me included haha
You’re doing great man! Excellent video
I was fixing an exhaust rattle on my v70r and I saw that bracket of doom or whatever and assumed I was like missing a hanger or it was something incorrect with the aftermarket exhaust design. It seemed impossible that an exhaust was ever supposed just rest on a bracket like that.
Only a guy who is 19 will do tgis
whats the size of the hoes you got at 7:35 the red,blue and the yellow one, also what size is it on the hoes that connect to the grey rounded thing just above the rest?
Where did u go
I've had to do the coil harness replacement as well. Dave Barton to the rescue!
This young man is an organized genius . very sober and informative knowledge . I would say , He is a meticulous teacher who simplifies the most complicated . I own an XC 70 and l wish He was my neighbor . l would gladly give him my car to work on with total peace of mind . I wish you the best of success young man. Thank you for this great video and photography .
I was going to do all that until I saw the cost in parts. I bought a maxjax M7K lift instead, after I pay that off I'll start buying parts. With subframe out of the way its a great time to swap the power steering lines if theyre original.
So glad I found this channel. Im in the process of stockpiling parts for my own R build. Ive got a bone stock 2005 6 speed S60R with 144k that ive had since 2017. I had a buddy who was a Volvo master tech go through it and it ran trouble free until a little over a year ago. I developed a misfire I couldn't track and I've decided to now is as good a time as any to build it the way ive always wanted to. I plan on doing most of the upgrades as this guy, minus the manual swap, so I'll be coming back to these videos over and over again. 👍🏻
The sound of your car is really childish. it's a nice respected brand and its a station car. putting that exaust on it, that makes such a terrible kit car sound makes it a junk for 14 years old. the sounds does not come from the engine, but from a bad exaust. that makes it cheap and childish. check the sounds of a really powerfull cars, they sound different not like this.
Where do you get your shirts Willem, I REALLY need shirts like that man
I have 06 V70 with the same engine. I see you didn't do the timing belt. At 120K that's recommended service. Also the fuel filter is supposed to be done. I didn't know changing the plugs or oil would be so easy. Getting the spark plugs changed gave it a nice boost and I read some guy saying that a fuel filter change he did on his V70 also gave a few extra HP!
$3K for all those major repairs is a steal in my eyes! I own a 2006 Mazda 3 rn and in my 2 years of ownership have spent just under $9K on both major and random shit, not including replacing all of the fluids, filters, plugs and so on. And all I have to show for it is a knocking engine, aftermarket engine mounts and sway bars. I think imma get a S60R 😅
No more to say or Do...?..
Awesome job fella🙏love those wheels
Thats so funny I didnt know my boy sanders was the one who tuned your car till I rewatched lol. Happy to see the progress on the R!
Excellent video. I really enjoyed it. I changed the spark plugs for the first time on my 2005 XC70. I did not remove the strut bar as could get a 1/4" ratchet under the turbo pipe. Like you, my plugs 1 and 5 snapped in half on removal. The previous owner had Bosch Platinums x 4 and one NGK installed 🤷🏾♂️. The oil change I do mine the same way but since I do not have a garage or even a driveway I let my mechanic tackle the strut mounts. When I first got the car the first service they did the ATF and the top engine mount.