To the Creator of this video ,I just did this for the first time for a customer , neighbor,and only,only,only because of this video ,I succeeded, U HAVE MY SUBSCRIPTION,AND IM. A 18 YEAR Self Taught MECHANIC
@LaplacianFourierАй бұрын
Thank you for the kind words, man. Wish you all the best in your mechanic journey! 🫶
@ajmanoulian6 ай бұрын
I just got done doing this to my 2010 Fit and it worked like a charm. Start to finish it took about 30 minutes.
@alphadog19617 ай бұрын
Murphys Law is now Marty's Law...IF there is any chance of this damn thing breaking...it is going to break(and stay seized) Murphy has nothing on Marty ! Good Luck to every other name though.
@LaplacianFourier7 ай бұрын
Rick and Marty
@FunwithAhadandSarina7 ай бұрын
Thank you for the tip to know how much it need drill, informative.
@ross95818 ай бұрын
Just want to thank you . I view your video as I was desperate trying to remove a 17 years abs sensor on a Honda. I got some clues from your video and finally succeeded to remove the stuck mess. Thanks again.
@KietNguyen-up9vx10 ай бұрын
how do you learn what sensor is bad. I been trying to figure out what my code mean. I have a 2014 Honda Accord with a code of 38-11 (ABS solenoid valve malfunction). I took it to O'reilly and that was all they could make from it. It pop on and off every other day and it driving me crazy. I brought a haynes repair book and waiting for it to come in to see if it give any more information. Also i tried taking an abs sensor out yesterday. I got the screw off and unweld the rust from it but when i pull the sensor out of the housing it wouldn't bulged. felt a lot of resistance... tried rotating but nothing. I was too scared to continue in fear of breaking it. Do you remember how to pull it out from the housing? just straight back or is there a trick.
@LaplacianFourier9 ай бұрын
For Fit, front left sensor code was 13. It was 1 long flash and 3 short flashes either on the driver gauge area or in the radio… can’t remember now. If your error code says abs solenoid valve, I’d go fix that first, maybe the abs light come on as a byproduct of that issue. The sensors are not too expensive if you think it’s not the solenoid valve but just a bad sensor… but I recommend you tackle the problem indicated by the error code. Research other ways pin point solenoid valve issue and if confirmed, time’s a wasting.
@AM-vc3de Жыл бұрын
I would’ve screw a bolt in to it and pul it out with a pliers
@Marcesko Жыл бұрын
Just drill a small hole and put a screw there and then just pull. Don't forget to leave it soak in WD40 for a few minutes
@ralphwatten2426 Жыл бұрын
Shop vacuum to get the drill shavings out of that sensor hole.
@darrinjt1 Жыл бұрын
I didn't have much of a problem getting the old one out ,I had a problem getting the new one in and ended up breaking it trying to get it back out after it was stuck half way in
@LaplacianFourier Жыл бұрын
Maybe you were sent the wrong part?? 🤔
@vickikoch96 Жыл бұрын
If sensors were replaced a year/year and a half ago would you think they've actually failed again(were broke during wheel bearing change) or just need cleaning?
@LaplacianFourier Жыл бұрын
If it’s original Honda part, it’s unlikely to break in a year, so in that case, unhook the connector up in the wheel well. Get a multimeter and test the leads of the connector for resistance. If it’s infinite or 0, then it’s broken, but if there is some value, it may be still working. It’s really unlikely that it’s still working though because the whole sensor is molded in the plastic and it shouldn’t get dirty at all because there’s almost no chance dirt will get in there. Just spend ~$30 and replace the sensor!
@richardbrown8794 Жыл бұрын
Thanks so much .drilled it out enough to get coarse thread drywall in it then pulled out with cat paw crow bar.thanks again
@killtheidols1326 Жыл бұрын
hello my friend from Europe,,,please answer me a question,,,does your car have a CVT automatic transmission?,did you have problems with the transmission because of this abs sensor?.I have a honda jazz and I have problems with the abs sensor, but it is related to speed recognition, thank you.
@LaplacianFourier Жыл бұрын
Yes my car has an automatic transmission, not CVT. I did not have transmission problems at all. Yes this sensor obviously tells the car the RPM of the wheels so you will have speed recognition problems related to this ABS sensor but I am 97% sure it has nothing to do with your transmission.
@killtheidols1326 Жыл бұрын
@@LaplacianFourier thanks bro,.
@FlemNmzzzz Жыл бұрын
Thanks for this. I have both frontend wheel speed units rusted in and had to bust them off. I was in the process of redoing the entire frontend anyway so I took the hubs to the bench to impact in new ball joints. I drilled out the rusted in sensors and the new ones only fit so far. I'll work the drill. Thanks again
@aureate Жыл бұрын
Wouldn't it just be easier to drill a screw into the remnant of the old sensor and then lever it out?
@LaplacianFourier Жыл бұрын
Now we’re cooking with fire!
@craigwiess1656 Жыл бұрын
Rear sensors broke off on my Element, I was replacing the wheel bearing and cv axles, both sides the bolt broke off flush. Odyssey, Element use very similar sensors so what you show should work with most Hondas.
@shantor100 Жыл бұрын
The plastic shavings go inside where your axle and seal are. Would make me nervous. best to take your wheel off
@craiglist3082 жыл бұрын
DO what this guy did in the video verses ....in an accord 06 remove the upper ball joint bolt 17mm and the caliper bolts 17mm and undo the cv axel nut 32mm and push the cv axel through the knuckle and pivot the knuckle to view the plastic part down inside, which if the plastic is rusted in... it could still have to be drilled....
@josephjones40862 жыл бұрын
Worked well for me. I ended up drilling 0.8 in. deep with a 5/16" drill. Then I used an o-ring pick shaped like a hook to 'gaff' it
@marvinwalker41052 жыл бұрын
Do you need to change the sensor and cable or just the sensor
@LaplacianFourier2 жыл бұрын
The sensor comes with cable so change the sensor and the cable.
@rayrosa50232 жыл бұрын
Was this car in the bottom of the ocean?
@LaplacianFourier Жыл бұрын
Someone drove it in Vermont dirt road and never did anti-rust preparation. Look what they did to my boy.
@Petedaddy87882 жыл бұрын
Great video. Thank you, sir
@ryanmorrow44782 жыл бұрын
Thanks for the video, big help on my Mini Cooper s!!
@MrKawiorboss2 жыл бұрын
Only one Honestly and Smart guy on KZread. Not need remove everythg. Great Video. Best of luck for Urself
@alexandercahoulan65832 жыл бұрын
I just did this.....I took out lower ball joint, and axle from the hub. Then from the rear of the hub you get a clear view of the magnetic strip on the bearing. THEN you can sufficiently clean out the area. I used 5/16s drill bit. Its perfect fit. You dont need to take the whole knuckle off. Just swing the knuckle back and forth after disconnecting lower ball joint. BUT you gotta take the axle out of the hub. I mean come on now. Your just leaving shards and shavings of metal and plastic if you dont. PLUS I cleaned up the magnetic strip. Its the most important part. If you just go ham on it you will ruin magnetic strip. Then youll need to replace wheel bearing. Work quick or work quick and smart.
@LaplacianFourier2 жыл бұрын
Read the pinned comment.
@noel.sk032 жыл бұрын
STOP STOP! an RTX 3080 with the 150w has more hashrate than a 3070. same for the 3080ti and 3070ti. try using Nicehash OC Tune. and go with memory delta as much up as you can and you will see that you can have 80 MH/s
@enteoz1694 Жыл бұрын
I got 80 but it wasn't holding any tips?
@lincolnwilliams56672 жыл бұрын
Don't forget to knock off all the rust from the mounting surface, I have see rust on the mounting surface hold the sensor up just enough to cause problems 😉
@Fly-aaron92 Жыл бұрын
Yeah, that's a real bad, common issue on 99-06 chevy an gmcs.
@binancecrypto25732 жыл бұрын
You have done many mistakes in using the miner at maxim memory speed and processor level. I do advice to go with the processor somewhere under 1000-750 and memory not higher than 1725 .
@nipuns76632 жыл бұрын
Have you tried trex lock core clock
@MyIronman82 жыл бұрын
I like this kid all ready
@MyIronman82 жыл бұрын
if it's a sensor and you don't need it anymore turn the can upside down spray that soccer get that thing nice and frosty than a beer a light get a drill bit and drill through that sucker and then when you drill through it and when you feel like you went through it stop and then blow out the hole and then the new sensor should fit
@LaplacianFourier2 жыл бұрын
🤣
@MASA-ARRI2 жыл бұрын
Finally got my raider I'm doing 68.56mh stable no BSD.... MAXED OUT MEMORY can do anything on the laptop with no issues..
@LaplacianFourier2 жыл бұрын
Good on you bruh 💪
@MASA-ARRI2 жыл бұрын
Thanks brother combined I have almost 1gh on ether Asus ROG zephyrus duo 15 se MSI GE76 RAIDER desktop 3080 and 3090 and 8 ASIC miners making close 100$ per day now
@LaplacianFourier2 жыл бұрын
@@MASA-ARRI wow what asics are you running? When did you buy them and how much did you pay for them?
@MASA-ARRI2 жыл бұрын
@@LaplacianFourier I have 2 love core A1, 25th 1000$ each Aladdin t1 1500$ 32th Aladdin l2 1800$ 30th Antminer s9i 2 600$ each 36th 3 laptops Lenovo legion 5 pro 1399$ MSI GE76 RAIDER 3000$ Asus zephyrus duo 15 se 3000$ Helium miner bobcat 1500$ Rtx 3080 2000$ Rtx 3090 3000$
@LaplacianFourier2 жыл бұрын
@@MASA-ARRI wow those Asics are for Bitcoin and they are super power hungry. How the heck are they even profitable? What's your electric rate?
@ericyao60442 жыл бұрын
I have a ROG 3070 100W(Brand New this week) I can't increase the memory over 300 since the max is +300. I'm only getting 48-49 MH/s. Is there anyway to fix it? I have tried all the online solution except flashing BIOS which I don't really want to do. Thanks!
@LaplacianFourier2 жыл бұрын
Do some research on what your GPU memory standard is and their speeds. It's probably still GDDR5. Generally, if there's a software cap of +300, then that's the maximum safe OC you can do. Just cuz it says 3070, doesn't mean it is 3070. Nvidia is running a circus in the laptop space with the naming convention, as they always have. 🤡
@jvc-12412 жыл бұрын
The same thing happen to my honda accord ex 2004,3.0L.the most easier way to deal with the hustle,is to lubricate the sensor area were broke(thoroughly)then just pull the broken part with a long nose pliers,and your Done.without the drilling.😬😬😬
@dwaka082 жыл бұрын
Any lubricación ?
@jvc-12412 жыл бұрын
@@dwaka08 Just lubricate it with WD-40,but very Lightly enough to pull the broken piece out of the way,Ok.
@shantor100 Жыл бұрын
How do you pull it out if it broke off flush. There's nothing to grab
@ruinunes825111 ай бұрын
@@shantor100 You have a good point there. I have easy outs on hand anyway. I need to replace the rear right sensor and with 22 years of rust around it, I assume I’m in for a pig of a job and some phenomenal language
@speedygonzalez51672 жыл бұрын
Sure this video is still valid? I have an Asus Rog Strix 15 with RTX 3080 16GB and just can't get it... It raise up to 66-67 MHs then drops down drastically. The temp is too high with 85-88c... The fan/power limits are blocked in the afterburner (but I see in the video that you also has it blocked/greyed!) Tried --lock-cclock 1000 and --mclock 1750 but the gpu just doesn't keep up with the values dropping down constantly... Tried gminer and trex - the same problem... Maybe this video is already outdated 'cause of the difficulty? I see 4.29 difficulty in your video and now it is 8.73 (2miners).
@LaplacianFourier2 жыл бұрын
Still valid. Your laptop is thermal throttling. You need to go to Asus' fan curve management software and turn them UPPP! Laptop MSI Afterburner doesn't support fan control nor does trex batch file edit. Keep it up with the cclock and mclock though, they are driving up the efficiency. Lastly, difficulty doesn't decrease your hashing rate. Think of it like this, your 64 mh/s is like your PC being able to add 64 every sec. When it's low difficulty, the sum to hit the block reward is 128. You get a reward in 2 sec. When difficulty is high, the sum required moves to like 1280. Now you get rewarded every 20 secs instead. Capische? 4.29 G you saw in the video isn't difficulty, it's the DAG file size. Kinda like the keys you need at hand to solve the cryptographic function. That's why you can't mine Eth with 4GB cards anymore. Bruh.
@hexta93622 жыл бұрын
60mh and 54°-57° or 66mh and 63°-64° ? Which one is better ?
@LaplacianFourier2 жыл бұрын
66 MH/s. Just draw the temp line at 100 C.
@mchdglk2 жыл бұрын
İ have 140w3070. with oc 67.167 mh :) (max)
@LaplacianFourier2 жыл бұрын
Siiick!
@dZHEMC2 жыл бұрын
Can't believe my own eyes
@jerukjuarez33272 жыл бұрын
Thanx i copy your Numbers and now it at 66.5 to 66.90 power 128w 58c
@LaplacianFourier2 жыл бұрын
Look up how to do absolute core clock lock on T-rex. You should get 67 MH/s for about 110W.
@noel.sk032 жыл бұрын
Wait on MSI website they are saying that the GE76 Raider can run max 140w not 155w? did you manually OC?
@LaplacianFourier2 жыл бұрын
Looks like they make GE76 with 3070 and 3060 GPUs. Maybe you're looking at a 3070 model? In any case, I've seen it do 150W constant and it's advertised as such.
@noel.sk032 жыл бұрын
@@LaplacianFourier Yes i now know why its 10watt Dynamic Boost.
@davidfrancis21632 жыл бұрын
This video was exactly what I was looking for. Thank you. I just bought the Alienware X17 with the same card. At 1150 memory OC I’m getting 61-62 Hashrate. I was too nervous to OC the memory higher since it’s in a brand new laptop but after watching this vid I’ll start easing it up. Do you have any reservations about such a high memory OC? My temps are at 61 C and so far no invalid shares but still a little weary. Thanks for the great video!
@LaplacianFourier2 жыл бұрын
No it should be good to OC memory like I did. Remember, desktop 3090 memory runs close to 100C while mining and 80-90C is considered good temps. So it should be okay for your memory to reach 90ish C.
@Richdadful2 жыл бұрын
@@LaplacianFourier Can validate that, I mine with rtx 3080 thats my gaming card as well. COre temps are 60-65 but memory temps go upto 95-98 Deg C. This is after I changed the stock thermal pads with good quality ones from Gelid. ELse temps used to reach 110 Deg C also.
@Maviejderyaa2 жыл бұрын
I'm digging 45 mh with a 105w RTX 3080. Do you have any suggested settings?
@LaplacianFourier2 жыл бұрын
Up the memory clock and down the core clock... Just watch the video 😂
@noel.sk032 жыл бұрын
yes first try Mining with Nicehash Quickminer. try profile high and then open the OC Tune and see whats your OC settings.
@Great_America2 жыл бұрын
You overclocked your memory to max on air cooling and are mad because your laptop BSOD? Get real bruh.
@LaplacianFourier2 жыл бұрын
A viewer requested this 😂
@MASA-ARRI2 жыл бұрын
Funny mine is maxed out same laptop @68.56mh minus 200 on the core and 3 days now no BSOD... I was the one who ask him to max it out 😂
@user-fm3xp3jo6x2 жыл бұрын
hash rate same msi gp 3070 140 w
@LaplacianFourier2 жыл бұрын
As expected, they have the same memory and memory is king in Eth.
@shutitdown38092 жыл бұрын
Isnt 67mh/s low? I get 65mh/s on 115w on my 3070's
@LaplacianFourier2 жыл бұрын
No, the bottleneck is the memory and it seems 115w has the same memory as 155w GPU.
@onatcl3w4632 жыл бұрын
How did you set the curve editior? Pls let me know
@LaplacianFourier2 жыл бұрын
Click the Curve Editor button and drag the curve points. Look up for hotkeys to control multiple points.
@Buzz-Of-Craze2 жыл бұрын
Top 30 Ethereum Twitter Accounts You Should Follow In 2021 kzread.info/dash/bejne/kaaalbSrdLKadrA.html
@MASA-ARRI2 жыл бұрын
Wow thanks for the video I guess I will go with a 3070 with a TDP of 140.
@LaplacianFourier2 жыл бұрын
Yes. As I said, these laptops GPUs are memory constrained for Eth mining. The higher TDP seems to afford faster core clock speeds and that's useless for Eth.
@MASA-ARRI2 жыл бұрын
@@LaplacianFourier gotcha once eth switch over you'll have one kick ass gaming laptop 🤷🏿♂️😊 but I appreciate it because I was about to spend a lot of money for this laptop when a 3080 with TDP 130 is getting the same hash rate of a 165...
@JanPing2 жыл бұрын
thank you very , I will go to 3070 130w,140w too.
@MASA-ARRI2 жыл бұрын
@@JanPing just got a legion pro 5 140tdp rtx 3070 hash rate 67mh 😁
@user-qj1lr3wz4t2 жыл бұрын
@@MASA-ARRI thx
@MASA-ARRI2 жыл бұрын
This is not adding up msi ge76 raider rtx 3080 16gb TDP is 165w with bios update .. I just returned a gigabyte 15p rtx 3080 16gb and TDP was only 130 and I was getting a higher hash rate then yours 64-67mh... You gotta be doing something wrong this should be getting close to what my desktop rtx is getting @ 165w TDP
@LaplacianFourier2 жыл бұрын
Really? What's your Hashrate and oveeclocks?
@MASA-ARRI2 жыл бұрын
@@LaplacianFourier with gigabyte 15p I was getting around 64-68mh 1500+ on the memory with afterburner... And that was at max TDP 130... No way a 165w TDP only getting the same at a 130..
@LaplacianFourier2 жыл бұрын
Oh I get what you mean. Yea TDP doesn't matter much with Eth because core clock doesn't matter as much as the memory clock. You saw that my core was as underclocked to as low as 1080 MHz and my power consumption was at around 120 W. It can certainly use as much as 165W but that's if you turn the core clock to around 1800 MHz and that's just useless heat. Unfortunately memory OC can only go around +1800 MHz before invalid shares.
@MASA-ARRI2 жыл бұрын
I understand what you mean as far as dissipation, but mines was at 130 and I didn't have any problem with heat or shares with nice hash my temperatures were in the green, and I had over 1,500 on the memory. I'm going to buy an MSI GE 76 cuz I want to see what 165 can do. my RTX 3080 desktop is around 210w and gets about 102mh.
@MASA-ARRI2 жыл бұрын
Is there any way you can make a video and show me at Max what the mega hash would be I would appreciate it I will be using it to validate my purchase because that laptop is pretty expensive it's about $3,400
Пікірлер
To the Creator of this video ,I just did this for the first time for a customer , neighbor,and only,only,only because of this video ,I succeeded, U HAVE MY SUBSCRIPTION,AND IM. A 18 YEAR Self Taught MECHANIC
Thank you for the kind words, man. Wish you all the best in your mechanic journey! 🫶
I just got done doing this to my 2010 Fit and it worked like a charm. Start to finish it took about 30 minutes.
Murphys Law is now Marty's Law...IF there is any chance of this damn thing breaking...it is going to break(and stay seized) Murphy has nothing on Marty ! Good Luck to every other name though.
Rick and Marty
Thank you for the tip to know how much it need drill, informative.
Just want to thank you . I view your video as I was desperate trying to remove a 17 years abs sensor on a Honda. I got some clues from your video and finally succeeded to remove the stuck mess. Thanks again.
how do you learn what sensor is bad. I been trying to figure out what my code mean. I have a 2014 Honda Accord with a code of 38-11 (ABS solenoid valve malfunction). I took it to O'reilly and that was all they could make from it. It pop on and off every other day and it driving me crazy. I brought a haynes repair book and waiting for it to come in to see if it give any more information. Also i tried taking an abs sensor out yesterday. I got the screw off and unweld the rust from it but when i pull the sensor out of the housing it wouldn't bulged. felt a lot of resistance... tried rotating but nothing. I was too scared to continue in fear of breaking it. Do you remember how to pull it out from the housing? just straight back or is there a trick.
For Fit, front left sensor code was 13. It was 1 long flash and 3 short flashes either on the driver gauge area or in the radio… can’t remember now. If your error code says abs solenoid valve, I’d go fix that first, maybe the abs light come on as a byproduct of that issue. The sensors are not too expensive if you think it’s not the solenoid valve but just a bad sensor… but I recommend you tackle the problem indicated by the error code. Research other ways pin point solenoid valve issue and if confirmed, time’s a wasting.
I would’ve screw a bolt in to it and pul it out with a pliers
Just drill a small hole and put a screw there and then just pull. Don't forget to leave it soak in WD40 for a few minutes
Shop vacuum to get the drill shavings out of that sensor hole.
I didn't have much of a problem getting the old one out ,I had a problem getting the new one in and ended up breaking it trying to get it back out after it was stuck half way in
Maybe you were sent the wrong part?? 🤔
If sensors were replaced a year/year and a half ago would you think they've actually failed again(were broke during wheel bearing change) or just need cleaning?
If it’s original Honda part, it’s unlikely to break in a year, so in that case, unhook the connector up in the wheel well. Get a multimeter and test the leads of the connector for resistance. If it’s infinite or 0, then it’s broken, but if there is some value, it may be still working. It’s really unlikely that it’s still working though because the whole sensor is molded in the plastic and it shouldn’t get dirty at all because there’s almost no chance dirt will get in there. Just spend ~$30 and replace the sensor!
Thanks so much .drilled it out enough to get coarse thread drywall in it then pulled out with cat paw crow bar.thanks again
hello my friend from Europe,,,please answer me a question,,,does your car have a CVT automatic transmission?,did you have problems with the transmission because of this abs sensor?.I have a honda jazz and I have problems with the abs sensor, but it is related to speed recognition, thank you.
Yes my car has an automatic transmission, not CVT. I did not have transmission problems at all. Yes this sensor obviously tells the car the RPM of the wheels so you will have speed recognition problems related to this ABS sensor but I am 97% sure it has nothing to do with your transmission.
@@LaplacianFourier thanks bro,.
Thanks for this. I have both frontend wheel speed units rusted in and had to bust them off. I was in the process of redoing the entire frontend anyway so I took the hubs to the bench to impact in new ball joints. I drilled out the rusted in sensors and the new ones only fit so far. I'll work the drill. Thanks again
Wouldn't it just be easier to drill a screw into the remnant of the old sensor and then lever it out?
Now we’re cooking with fire!
Rear sensors broke off on my Element, I was replacing the wheel bearing and cv axles, both sides the bolt broke off flush. Odyssey, Element use very similar sensors so what you show should work with most Hondas.
The plastic shavings go inside where your axle and seal are. Would make me nervous. best to take your wheel off
DO what this guy did in the video verses ....in an accord 06 remove the upper ball joint bolt 17mm and the caliper bolts 17mm and undo the cv axel nut 32mm and push the cv axel through the knuckle and pivot the knuckle to view the plastic part down inside, which if the plastic is rusted in... it could still have to be drilled....
Worked well for me. I ended up drilling 0.8 in. deep with a 5/16" drill. Then I used an o-ring pick shaped like a hook to 'gaff' it
Do you need to change the sensor and cable or just the sensor
The sensor comes with cable so change the sensor and the cable.
Was this car in the bottom of the ocean?
Someone drove it in Vermont dirt road and never did anti-rust preparation. Look what they did to my boy.
Great video. Thank you, sir
Thanks for the video, big help on my Mini Cooper s!!
Only one Honestly and Smart guy on KZread. Not need remove everythg. Great Video. Best of luck for Urself
I just did this.....I took out lower ball joint, and axle from the hub. Then from the rear of the hub you get a clear view of the magnetic strip on the bearing. THEN you can sufficiently clean out the area. I used 5/16s drill bit. Its perfect fit. You dont need to take the whole knuckle off. Just swing the knuckle back and forth after disconnecting lower ball joint. BUT you gotta take the axle out of the hub. I mean come on now. Your just leaving shards and shavings of metal and plastic if you dont. PLUS I cleaned up the magnetic strip. Its the most important part. If you just go ham on it you will ruin magnetic strip. Then youll need to replace wheel bearing. Work quick or work quick and smart.
Read the pinned comment.
STOP STOP! an RTX 3080 with the 150w has more hashrate than a 3070. same for the 3080ti and 3070ti. try using Nicehash OC Tune. and go with memory delta as much up as you can and you will see that you can have 80 MH/s
I got 80 but it wasn't holding any tips?
Don't forget to knock off all the rust from the mounting surface, I have see rust on the mounting surface hold the sensor up just enough to cause problems 😉
Yeah, that's a real bad, common issue on 99-06 chevy an gmcs.
You have done many mistakes in using the miner at maxim memory speed and processor level. I do advice to go with the processor somewhere under 1000-750 and memory not higher than 1725 .
Have you tried trex lock core clock
I like this kid all ready
if it's a sensor and you don't need it anymore turn the can upside down spray that soccer get that thing nice and frosty than a beer a light get a drill bit and drill through that sucker and then when you drill through it and when you feel like you went through it stop and then blow out the hole and then the new sensor should fit
🤣
Finally got my raider I'm doing 68.56mh stable no BSD.... MAXED OUT MEMORY can do anything on the laptop with no issues..
Good on you bruh 💪
Thanks brother combined I have almost 1gh on ether Asus ROG zephyrus duo 15 se MSI GE76 RAIDER desktop 3080 and 3090 and 8 ASIC miners making close 100$ per day now
@@MASA-ARRI wow what asics are you running? When did you buy them and how much did you pay for them?
@@LaplacianFourier I have 2 love core A1, 25th 1000$ each Aladdin t1 1500$ 32th Aladdin l2 1800$ 30th Antminer s9i 2 600$ each 36th 3 laptops Lenovo legion 5 pro 1399$ MSI GE76 RAIDER 3000$ Asus zephyrus duo 15 se 3000$ Helium miner bobcat 1500$ Rtx 3080 2000$ Rtx 3090 3000$
@@MASA-ARRI wow those Asics are for Bitcoin and they are super power hungry. How the heck are they even profitable? What's your electric rate?
I have a ROG 3070 100W(Brand New this week) I can't increase the memory over 300 since the max is +300. I'm only getting 48-49 MH/s. Is there anyway to fix it? I have tried all the online solution except flashing BIOS which I don't really want to do. Thanks!
Do some research on what your GPU memory standard is and their speeds. It's probably still GDDR5. Generally, if there's a software cap of +300, then that's the maximum safe OC you can do. Just cuz it says 3070, doesn't mean it is 3070. Nvidia is running a circus in the laptop space with the naming convention, as they always have. 🤡
The same thing happen to my honda accord ex 2004,3.0L.the most easier way to deal with the hustle,is to lubricate the sensor area were broke(thoroughly)then just pull the broken part with a long nose pliers,and your Done.without the drilling.😬😬😬
Any lubricación ?
@@dwaka08 Just lubricate it with WD-40,but very Lightly enough to pull the broken piece out of the way,Ok.
How do you pull it out if it broke off flush. There's nothing to grab
@@shantor100 You have a good point there. I have easy outs on hand anyway. I need to replace the rear right sensor and with 22 years of rust around it, I assume I’m in for a pig of a job and some phenomenal language
Sure this video is still valid? I have an Asus Rog Strix 15 with RTX 3080 16GB and just can't get it... It raise up to 66-67 MHs then drops down drastically. The temp is too high with 85-88c... The fan/power limits are blocked in the afterburner (but I see in the video that you also has it blocked/greyed!) Tried --lock-cclock 1000 and --mclock 1750 but the gpu just doesn't keep up with the values dropping down constantly... Tried gminer and trex - the same problem... Maybe this video is already outdated 'cause of the difficulty? I see 4.29 difficulty in your video and now it is 8.73 (2miners).
Still valid. Your laptop is thermal throttling. You need to go to Asus' fan curve management software and turn them UPPP! Laptop MSI Afterburner doesn't support fan control nor does trex batch file edit. Keep it up with the cclock and mclock though, they are driving up the efficiency. Lastly, difficulty doesn't decrease your hashing rate. Think of it like this, your 64 mh/s is like your PC being able to add 64 every sec. When it's low difficulty, the sum to hit the block reward is 128. You get a reward in 2 sec. When difficulty is high, the sum required moves to like 1280. Now you get rewarded every 20 secs instead. Capische? 4.29 G you saw in the video isn't difficulty, it's the DAG file size. Kinda like the keys you need at hand to solve the cryptographic function. That's why you can't mine Eth with 4GB cards anymore. Bruh.
60mh and 54°-57° or 66mh and 63°-64° ? Which one is better ?
66 MH/s. Just draw the temp line at 100 C.
İ have 140w3070. with oc 67.167 mh :) (max)
Siiick!
Can't believe my own eyes
Thanx i copy your Numbers and now it at 66.5 to 66.90 power 128w 58c
Look up how to do absolute core clock lock on T-rex. You should get 67 MH/s for about 110W.
Wait on MSI website they are saying that the GE76 Raider can run max 140w not 155w? did you manually OC?
Looks like they make GE76 with 3070 and 3060 GPUs. Maybe you're looking at a 3070 model? In any case, I've seen it do 150W constant and it's advertised as such.
@@LaplacianFourier Yes i now know why its 10watt Dynamic Boost.
This video was exactly what I was looking for. Thank you. I just bought the Alienware X17 with the same card. At 1150 memory OC I’m getting 61-62 Hashrate. I was too nervous to OC the memory higher since it’s in a brand new laptop but after watching this vid I’ll start easing it up. Do you have any reservations about such a high memory OC? My temps are at 61 C and so far no invalid shares but still a little weary. Thanks for the great video!
No it should be good to OC memory like I did. Remember, desktop 3090 memory runs close to 100C while mining and 80-90C is considered good temps. So it should be okay for your memory to reach 90ish C.
@@LaplacianFourier Can validate that, I mine with rtx 3080 thats my gaming card as well. COre temps are 60-65 but memory temps go upto 95-98 Deg C. This is after I changed the stock thermal pads with good quality ones from Gelid. ELse temps used to reach 110 Deg C also.
I'm digging 45 mh with a 105w RTX 3080. Do you have any suggested settings?
Up the memory clock and down the core clock... Just watch the video 😂
yes first try Mining with Nicehash Quickminer. try profile high and then open the OC Tune and see whats your OC settings.
You overclocked your memory to max on air cooling and are mad because your laptop BSOD? Get real bruh.
A viewer requested this 😂
Funny mine is maxed out same laptop @68.56mh minus 200 on the core and 3 days now no BSOD... I was the one who ask him to max it out 😂
hash rate same msi gp 3070 140 w
As expected, they have the same memory and memory is king in Eth.
Isnt 67mh/s low? I get 65mh/s on 115w on my 3070's
No, the bottleneck is the memory and it seems 115w has the same memory as 155w GPU.
How did you set the curve editior? Pls let me know
Click the Curve Editor button and drag the curve points. Look up for hotkeys to control multiple points.
Top 30 Ethereum Twitter Accounts You Should Follow In 2021 kzread.info/dash/bejne/kaaalbSrdLKadrA.html
Wow thanks for the video I guess I will go with a 3070 with a TDP of 140.
Yes. As I said, these laptops GPUs are memory constrained for Eth mining. The higher TDP seems to afford faster core clock speeds and that's useless for Eth.
@@LaplacianFourier gotcha once eth switch over you'll have one kick ass gaming laptop 🤷🏿♂️😊 but I appreciate it because I was about to spend a lot of money for this laptop when a 3080 with TDP 130 is getting the same hash rate of a 165...
thank you very , I will go to 3070 130w,140w too.
@@JanPing just got a legion pro 5 140tdp rtx 3070 hash rate 67mh 😁
@@MASA-ARRI thx
This is not adding up msi ge76 raider rtx 3080 16gb TDP is 165w with bios update .. I just returned a gigabyte 15p rtx 3080 16gb and TDP was only 130 and I was getting a higher hash rate then yours 64-67mh... You gotta be doing something wrong this should be getting close to what my desktop rtx is getting @ 165w TDP
Really? What's your Hashrate and oveeclocks?
@@LaplacianFourier with gigabyte 15p I was getting around 64-68mh 1500+ on the memory with afterburner... And that was at max TDP 130... No way a 165w TDP only getting the same at a 130..
Oh I get what you mean. Yea TDP doesn't matter much with Eth because core clock doesn't matter as much as the memory clock. You saw that my core was as underclocked to as low as 1080 MHz and my power consumption was at around 120 W. It can certainly use as much as 165W but that's if you turn the core clock to around 1800 MHz and that's just useless heat. Unfortunately memory OC can only go around +1800 MHz before invalid shares.
I understand what you mean as far as dissipation, but mines was at 130 and I didn't have any problem with heat or shares with nice hash my temperatures were in the green, and I had over 1,500 on the memory. I'm going to buy an MSI GE 76 cuz I want to see what 165 can do. my RTX 3080 desktop is around 210w and gets about 102mh.
Is there any way you can make a video and show me at Max what the mega hash would be I would appreciate it I will be using it to validate my purchase because that laptop is pretty expensive it's about $3,400
LHR FTW 😁