I want this where do I get it? Does it work with truck bracket?
@Tazerect2 ай бұрын
Is the Holley ultra low ram worth it
@fixyourautomobile2 ай бұрын
I remember this car on the dyno at EFI Express
@pimpslayer91094 ай бұрын
This is one of those scenarios I feel like where a picture doesn’t tell 1000 words, probably indescribable how this thing pulls compared to factory Audis. Seems like you still need to seek that power band at higher rpm’s to get full use of the turbo
@kflamas5 ай бұрын
thank you so much man, been having trouble with my ND 2016 Club and this video helped so much and gave me exactly what I needed! Fuel pump seemed to be overheating due to it not being replaced when I bought the car @80K Miles. The only reason I could guess why they didn’t replace it is because the fuel filter is apart of the pump so they didn’t even see it Mazda just tryna be complicated lol
@LewisMa6 ай бұрын
anyone know how to access the battery compartment to chagne?
@mty0_026 ай бұрын
Eu tenho uma demo 9❤
@just.a.simplejoe6 ай бұрын
Nice video man. Shame we can't get to it from the trunk.
@richardbates80237 ай бұрын
How's the 2.8 running?
@MrSeth828 ай бұрын
How much thickness does that add? I think you’d have a good market selling these or as a kit already welded…I would buy
@eddieelectric49388 ай бұрын
Hey i really hope u can help me out with my build seeing that u have some experience, would u recommend me to do double valve springs with solid lifter to get the car to 7000 rpm and to move the torque higher up yhe rev range, gonna supercharge it to 0.4 bar(6psi)
@whoisstevencox8 ай бұрын
Excellent video!
@kipperbusby21769 ай бұрын
Would you be willing to make more and sell them?
@3rdgenjose6999 ай бұрын
Where were those a headers from
@progarel_calpac9 ай бұрын
Масло закипит 😂 на 5минуте
@roberthathaway795810 ай бұрын
Why do would waste thousands to do this wow you must have money to throw away waste
@Benjammin4310 ай бұрын
looks like it’s coming along nicely! question, would there not be room under the car to run a rear mounted turbo?
@asv4k810 ай бұрын
You could all the way at the rear but you sacrifice response time. The long wheelbase will also help with the power levels and stability
@shanewright668511 ай бұрын
How do you adjust the ears
@asv4k810 ай бұрын
They can be bent by hand
@miatasonly11 ай бұрын
Hey man, been looking for a legit 5 lug swap on my ND. Would this adapter plate fit the brembos off the club trim without an adapter like you used for the NC brakes??
@user-xy5bd2jn6m Жыл бұрын
Красавчик
@joeschiltz2237 Жыл бұрын
The lower arm looks like it's not going to clear up n down movements
@a-a-roncarrizales9047 Жыл бұрын
Lol the cattle dog was like “who me?” 😂
@Leavemealone- Жыл бұрын
Ahh another man who likes to waste his money! Me too mines and sti haha
@masonherriott1684 Жыл бұрын
Damn..
@b5lyfe Жыл бұрын
Yo bro! Do you have a insta or facebook i could reach out to you about something? No i’m not a bot lol.
@user-to9id5xs9v Жыл бұрын
Hi, do you have Facebook or instagram profile, because I want to ask you some questions. Thx have a nice day!
@ilpatongi Жыл бұрын
Hey so, I've watched this video a couple of times now. Would it be possible to have this custom made for my car? I have a 124 Spider and I don't like 17s but as you know 18s are very hard to come by in 4x100 form Let me know if you would be able to sell me the hubs and maybe brake rotors.
@DuckDashHD Жыл бұрын
4:58 What yall been waiting for ;)
@kalduna882 Жыл бұрын
is that a stroker?
@SiaMinaX Жыл бұрын
amazing bag, how much did it cost?
@sashaghovanlou8175 Жыл бұрын
So glad to see her running again!
@brunocunha1998 Жыл бұрын
a youtube legend is back 🤩
@FatThor215 Жыл бұрын
Where’s the actual install video
@baubaa1417 Жыл бұрын
how can you tell if its the 12v or 30v v6?
@Bensawi2 ай бұрын
You have a 5v inscription on cylinder head when it's a 30v ;)
@piobandz68 Жыл бұрын
Yo how is it holding up still working ?
@pimpslayer91092 жыл бұрын
I have a 96 12V V6 quattro, I’ve been told it’s next to impossible to modify even slightly
@illsz2 жыл бұрын
Loving this build idea and seeing the progress - you're going to love the V8 too, mine puts a smile on my face every time I drive it.
@67_cst_chevy442 жыл бұрын
I knocked mine out without a vice using a deep 7/8 socket underneath the rocker. Used a extension on top to drive it thru.
@19krpm2 жыл бұрын
Looks like a 12v 2.8. Those engines are junk. My 12v had cracked cam caps at stock power. Sharp, 90deg castings, no shot peening, obviously. Good on you for building and tuning on a car. Keep it up.
@lpvgs-8172 жыл бұрын
I notice you did nc hubs you should probably switch to RX8 as they are stronger than the NC versions. NC guys switch RX8 hubs do to hub failure after lots of track time or engine power
@meteormedia70212 жыл бұрын
Those fenders look horrible.
@petrolheadracing12622 жыл бұрын
Any updates on the car?
@PPekka2 жыл бұрын
Nice project you got going on there. I am building an Audi A4 2.8 12V Quattro and I´m in the middle of turboing it, so of course I have searched the KZread and your Audi is one of the only few that have been built. Good luck going forward on the Miata!
@IngeBall2 жыл бұрын
What wheels?
@Blakelikesfood2 жыл бұрын
Where is this car now?
@user-pt1vf4df6i2 жыл бұрын
зачем, если есть bes?
@erikanderson17202 жыл бұрын
:O
@peebeme15062 жыл бұрын
Nice setup and good review… i just ordered one for my G3c
@tylaw6173 Жыл бұрын
How's it work?
@peebeme1506 Жыл бұрын
@@tylaw6173 it fit good, I haven’t made it to the range yet
Пікірлер
Was the AAH 12v forged? (Pistons and rods)
I want this where do I get it? Does it work with truck bracket?
Is the Holley ultra low ram worth it
I remember this car on the dyno at EFI Express
This is one of those scenarios I feel like where a picture doesn’t tell 1000 words, probably indescribable how this thing pulls compared to factory Audis. Seems like you still need to seek that power band at higher rpm’s to get full use of the turbo
thank you so much man, been having trouble with my ND 2016 Club and this video helped so much and gave me exactly what I needed! Fuel pump seemed to be overheating due to it not being replaced when I bought the car @80K Miles. The only reason I could guess why they didn’t replace it is because the fuel filter is apart of the pump so they didn’t even see it Mazda just tryna be complicated lol
anyone know how to access the battery compartment to chagne?
Eu tenho uma demo 9❤
Nice video man. Shame we can't get to it from the trunk.
How's the 2.8 running?
How much thickness does that add? I think you’d have a good market selling these or as a kit already welded…I would buy
Hey i really hope u can help me out with my build seeing that u have some experience, would u recommend me to do double valve springs with solid lifter to get the car to 7000 rpm and to move the torque higher up yhe rev range, gonna supercharge it to 0.4 bar(6psi)
Excellent video!
Would you be willing to make more and sell them?
Where were those a headers from
Масло закипит 😂 на 5минуте
Why do would waste thousands to do this wow you must have money to throw away waste
looks like it’s coming along nicely! question, would there not be room under the car to run a rear mounted turbo?
You could all the way at the rear but you sacrifice response time. The long wheelbase will also help with the power levels and stability
How do you adjust the ears
They can be bent by hand
Hey man, been looking for a legit 5 lug swap on my ND. Would this adapter plate fit the brembos off the club trim without an adapter like you used for the NC brakes??
Красавчик
The lower arm looks like it's not going to clear up n down movements
Lol the cattle dog was like “who me?” 😂
Ahh another man who likes to waste his money! Me too mines and sti haha
Damn..
Yo bro! Do you have a insta or facebook i could reach out to you about something? No i’m not a bot lol.
Hi, do you have Facebook or instagram profile, because I want to ask you some questions. Thx have a nice day!
Hey so, I've watched this video a couple of times now. Would it be possible to have this custom made for my car? I have a 124 Spider and I don't like 17s but as you know 18s are very hard to come by in 4x100 form Let me know if you would be able to sell me the hubs and maybe brake rotors.
4:58 What yall been waiting for ;)
is that a stroker?
amazing bag, how much did it cost?
So glad to see her running again!
a youtube legend is back 🤩
Where’s the actual install video
how can you tell if its the 12v or 30v v6?
You have a 5v inscription on cylinder head when it's a 30v ;)
Yo how is it holding up still working ?
I have a 96 12V V6 quattro, I’ve been told it’s next to impossible to modify even slightly
Loving this build idea and seeing the progress - you're going to love the V8 too, mine puts a smile on my face every time I drive it.
I knocked mine out without a vice using a deep 7/8 socket underneath the rocker. Used a extension on top to drive it thru.
Looks like a 12v 2.8. Those engines are junk. My 12v had cracked cam caps at stock power. Sharp, 90deg castings, no shot peening, obviously. Good on you for building and tuning on a car. Keep it up.
I notice you did nc hubs you should probably switch to RX8 as they are stronger than the NC versions. NC guys switch RX8 hubs do to hub failure after lots of track time or engine power
Those fenders look horrible.
Any updates on the car?
Nice project you got going on there. I am building an Audi A4 2.8 12V Quattro and I´m in the middle of turboing it, so of course I have searched the KZread and your Audi is one of the only few that have been built. Good luck going forward on the Miata!
What wheels?
Where is this car now?
зачем, если есть bes?
:O
Nice setup and good review… i just ordered one for my G3c
How's it work?
@@tylaw6173 it fit good, I haven’t made it to the range yet