I like that you did the esc’s with the original scoops I think the esc’s need more water than the motors plus they are more expensive than motors anyway. I run in salt water as well and man it costs so many steering servos and bearings in motors I only run waterproof esc’s but I add more sealing as well.
@ModifiedRC08773 күн бұрын
Excited to trial everything out! Too bad its only Monday!
@parker1ray3 күн бұрын
I lived in south Florida for four years and those pictures are beautiful, but when you are there, 95 degrees and 80 percent humidity is not comfortable in the least for 10 months of the year. Most of the freshwater ponds also had gators and you had to be careful. Right before I moved, a retired women was eaten by a big gator walking her dog next to the water!
@ModifiedRC08773 күн бұрын
@@parker1ray Definitely need to always be alert and yes it’s very warm in the summers. Amazing what you get used to though.
@jamesatkinson75173 күн бұрын
Really nice spot to run it. Great flip and great speed for that short run. Those 3 blades are so quiet I can’t use them on my riggers I get too much tail lift.
@ModifiedRC08773 күн бұрын
@@jamesatkinson7517 Thx man! I’ll get her fixed up and get some more runs in
@nealstarling54223 күн бұрын
That’s a good looking boat my friend, beautiful spot you have to run, I got lucky, the office park lake I run on installed anti geese/duck lights-keeps them up at night so they don’t stay. It’s always good when they land upright, they always land, upright is better 🤣👍👍👍
@ModifiedRC08773 күн бұрын
@@nealstarling5422 Thx brother!
@kolasaRC4 күн бұрын
congratulations on the cool tricks, this video made me sub. keep em comin from Alberta Canada❤❤❤❤❤
@@jackhammond986 I took a gamble and purchased from Alexi. I think I paid $700 for an ARTR. I’d get it from OSE if you’re thinking of buying. I’m considering selling mine in a couple of months if you’re interested. I’ll be making more improvements in cooling and hull strength first.
@OGPAPERBOY775 күн бұрын
Nice 💪💪💪 100 next video Get it!!! Enjoy your weekend 🤙🛥️
@ModifiedRC08775 күн бұрын
@@OGPAPERBOY77 Ty brother! You as well.
@markcole64756 күн бұрын
I’m a tech at a local hobby store and someone bought a used UL-19 from the store on consignment……it was modified with a 200 amp esc and bigger motor…anyway …this RC boat was the very first boat this buyer had ever owned….i had to do a couple things to it and he wanted me to test it…I ran it at a local lake close to my house on 6s (capable of 8s) …it’s FAST to say the least…I’m sure it hit 65 mph and I didn’t even stay in it long…. I truly hope this new owner can handle it …..plus being 79 years old will be a challenge also. Nice video
@ModifiedRC08776 күн бұрын
@@markcole6475 did it have a custom decal kit on it? Black and red with Tasmanian devil? My PB on 6s is 79mph on the UL.
@markcole64755 күн бұрын
@@ModifiedRC0877 sweat….those ULs are fast boats
@daiciuapostol797 күн бұрын
To many passes on full speed
@ModifiedRC08777 күн бұрын
@@daiciuapostol79 That’s not something I’m willing to accept. I’ll find a solution to allow many passes at 100%.
@daiciuapostol797 күн бұрын
@@ModifiedRC0877 8 mm connectors and better solder
@RCSpeedBoats4 күн бұрын
Hi Mate, really good speed! ESC and Motors configuration?
@ModifiedRC08774 күн бұрын
@@RCSpeedBoats Thanks for the compliment! Electronics are stock. stock Seeking 120 and 36series SSS motors. Another run coming up next week as long as I get parts.
@OGPAPERBOY7711 күн бұрын
Nice run! Congrats on your new PB 🤙🛥️
@ModifiedRC087711 күн бұрын
@@OGPAPERBOY77 TY sir!
@OGPAPERBOY7711 күн бұрын
I like this spot Looks nice and open for you to run the boats there. Nice run 77’s UP 🤙🛥️
@FEboatsАй бұрын
Nice boat, I’ve been using jb weld for my motor mounts, stuffing tubes and servo mounts for 20+ years. I’ve never had a single issue even flipping my cats at over 100mph. It’s great. I use the Devcon plastic weld for carbon onto plastic hulls.
@RogallaMarineRCАй бұрын
Sweeet!
@OGPAPERBOY77Ай бұрын
Shoutout the Goat VR46 🤙 Have you tossed it in the bathtub and check for leaks? I found the leak in my Popeye was thru the hardware so I just used shoegoo and it sealed it So im probably gonna seal my Cheetah hardware the same way cause Im sure its gonna leak as well. Sometimes its better to not record cause you can enjoy n focus more on the boat. Enjoy your Sunday 🤙🛥️🌴☀️
@OGPAPERBOY77Ай бұрын
Cool boat Cant wait to see it on an open lake 🤙🛥️
@ModifiedRC0877Ай бұрын
Coming soon!
@OGPAPERBOY77Ай бұрын
@@ModifiedRC0877are you making a recovery boat or buyin one?
@ModifiedRC0877Ай бұрын
@@OGPAPERBOY77 I’m making a simple PVC frame with Amazon electronics. I can’t justify the price of the Tug.
@OGPAPERBOY77Ай бұрын
@@ModifiedRC0877you can make a zipkitts tugster But that pvc is the cheapest route
@OGPAPERBOY77Ай бұрын
I like the color and details on this boat Cant wait to see it out 🤙🛥️
@ModifiedRC0877Ай бұрын
That would be disappointing considering it’s listed as waterproof and I did rinse out immediately with fresh water and then electronic spray. Prolly grab a mamba quick since I already have a Stump fab cooler in the tool box. Was gonna run this before deciding on a X8s. 🤷🏻♂️
@RogallaMarineRCАй бұрын
Sweet Boat! I’ve heard of stories where Castle ESC stopped working after brackish water covers the circuit board. Some people say to rinse it off with freshwater and it will start working again. I think B has said this before too.
@user-ip9it8lt8wАй бұрын
No bueno bro. Time for a new paint job
@ModifiedRC0877Ай бұрын
I’ll be smoothing out the damaged areas but not sure about paint. I really believe the decals saved the boat. They are thick pieces from Darkside.
@RogallaMarineRCАй бұрын
Looking good should be strong
@norcalrcАй бұрын
Your UL19 looks epic bro. New subscriber here Boatgang
@ModifiedRC0877Ай бұрын
Ty sir! I’ve been to your shop! Near SJ State. Used to live in Santa Clara. 😎
@jamesatkinson7517Ай бұрын
I hope it’s repairable that thing sounded perfect like you have the KV,prop and tune just right.
@ModifiedRC0877Ай бұрын
It’s is. I did a quick repair until the new boat comes in. Then I’ll repair it right.
@RogallaMarineRCАй бұрын
😯😯😯
@ModifiedRC0877Ай бұрын
It enough hands! Camera started falling and not enough time to re-grab the remote.
@RogallaMarineRCАй бұрын
@@ModifiedRC0877 hate to see it😢
@OGPAPERBOY77Ай бұрын
Beautiful spot! Wish I had water in my backyard Id be charging batteries allday Thank you for sharing 🤙🛥️
@ModifiedRC0877Ай бұрын
Thanks! I’ve got a new spot I’ve been wanting to run at that’s not so dangerous.
@OGPAPERBOY77Ай бұрын
Corrosion X has saved all my rcs and even my GNSS gps 🤙🛥️
@RogallaMarineRCАй бұрын
Hey brudder that prop looks a lot like the 45mm Dr props I’m running too. Bummer about swamping I did that yesterday on my cat. You can use some epoxy to carefully add a ‘nipple’ ring around that cf tube. Or just use a small zip tie. Or use another piece of silicone around first piece like big b does
@ModifiedRC0877Ай бұрын
Its is the same. The 44 I have has to much rake. Yeah, I’ve already got some smaller tubes on the way. These are 8mm! The silicon tubes are being asked a little too much to fit around that size me thinks.
@boatwerksАй бұрын
Just found your channel and subscribed
@ModifiedRC0877Ай бұрын
Thanks! Will have new content out soon, weather providing. Always windy in my neck of the woods so the waiting game is tough. Anything in particular you have questions on?
@talismenf2253Ай бұрын
love the retrieval stick lolol
@ModifiedRC0877Ай бұрын
😂 Spare no expense!
@RogallaMarineRC2 ай бұрын
Scaring me getting so close to the dock lol. Looks good bro. With your unconventional running spot a mono would be perfect. Kind of a tough spot to run a hydro😁
@ModifiedRC08772 ай бұрын
It’s tough to really understand changes with tide and current but it’s in the backyard so I just send it. There’s actually a park lake within 5 min from me but I’m lazy lol. I will prolly start going there for 6s runs and when I get another boat.
@RogallaMarineRC2 ай бұрын
Forgot that the stock rudder was longer good reminder
@benruggieri-cc2og2 ай бұрын
😮😂 yay RIP morning !
@RogallaMarineRC2 ай бұрын
2050kv is great because 6s is always an option. Great run brother! Which prop and turn fin? Or classified?
@ModifiedRC08772 ай бұрын
Doctor Prop 1644 and the stock fin with 15degree angle.
@EddieThe4rth2 ай бұрын
What is that?
@ModifiedRC08772 ай бұрын
Repair on the tip of a UL-19. I previously crashed it into the seawall. Fortunately I had a decal kit already and it saved the tip from ripping off. This boat is for sale and I’ll be running it on 6s to show performance. It will do mid to high 70’s
Пікірлер
I like that you did the esc’s with the original scoops I think the esc’s need more water than the motors plus they are more expensive than motors anyway. I run in salt water as well and man it costs so many steering servos and bearings in motors I only run waterproof esc’s but I add more sealing as well.
Excited to trial everything out! Too bad its only Monday!
I lived in south Florida for four years and those pictures are beautiful, but when you are there, 95 degrees and 80 percent humidity is not comfortable in the least for 10 months of the year. Most of the freshwater ponds also had gators and you had to be careful. Right before I moved, a retired women was eaten by a big gator walking her dog next to the water!
@@parker1ray Definitely need to always be alert and yes it’s very warm in the summers. Amazing what you get used to though.
Really nice spot to run it. Great flip and great speed for that short run. Those 3 blades are so quiet I can’t use them on my riggers I get too much tail lift.
@@jamesatkinson7517 Thx man! I’ll get her fixed up and get some more runs in
That’s a good looking boat my friend, beautiful spot you have to run, I got lucky, the office park lake I run on installed anti geese/duck lights-keeps them up at night so they don’t stay. It’s always good when they land upright, they always land, upright is better 🤣👍👍👍
@@nealstarling5422 Thx brother!
congratulations on the cool tricks, this video made me sub. keep em comin from Alberta Canada❤❤❤❤❤
kzread.infoUgkxmd7TGYOd4du5mXKR0CPD9-AH5M_ABUsh?si=iKnl481-tjvyJEZb
How much did you get this boat for?
@@jackhammond986 I took a gamble and purchased from Alexi. I think I paid $700 for an ARTR. I’d get it from OSE if you’re thinking of buying. I’m considering selling mine in a couple of months if you’re interested. I’ll be making more improvements in cooling and hull strength first.
Nice 💪💪💪 100 next video Get it!!! Enjoy your weekend 🤙🛥️
@@OGPAPERBOY77 Ty brother! You as well.
I’m a tech at a local hobby store and someone bought a used UL-19 from the store on consignment……it was modified with a 200 amp esc and bigger motor…anyway …this RC boat was the very first boat this buyer had ever owned….i had to do a couple things to it and he wanted me to test it…I ran it at a local lake close to my house on 6s (capable of 8s) …it’s FAST to say the least…I’m sure it hit 65 mph and I didn’t even stay in it long…. I truly hope this new owner can handle it …..plus being 79 years old will be a challenge also. Nice video
@@markcole6475 did it have a custom decal kit on it? Black and red with Tasmanian devil? My PB on 6s is 79mph on the UL.
@@ModifiedRC0877 sweat….those ULs are fast boats
To many passes on full speed
@@daiciuapostol79 That’s not something I’m willing to accept. I’ll find a solution to allow many passes at 100%.
@@ModifiedRC0877 8 mm connectors and better solder
Hi Mate, really good speed! ESC and Motors configuration?
@@RCSpeedBoats Thanks for the compliment! Electronics are stock. stock Seeking 120 and 36series SSS motors. Another run coming up next week as long as I get parts.
Nice run! Congrats on your new PB 🤙🛥️
@@OGPAPERBOY77 TY sir!
I like this spot Looks nice and open for you to run the boats there. Nice run 77’s UP 🤙🛥️
Nice boat, I’ve been using jb weld for my motor mounts, stuffing tubes and servo mounts for 20+ years. I’ve never had a single issue even flipping my cats at over 100mph. It’s great. I use the Devcon plastic weld for carbon onto plastic hulls.
Sweeet!
Shoutout the Goat VR46 🤙 Have you tossed it in the bathtub and check for leaks? I found the leak in my Popeye was thru the hardware so I just used shoegoo and it sealed it So im probably gonna seal my Cheetah hardware the same way cause Im sure its gonna leak as well. Sometimes its better to not record cause you can enjoy n focus more on the boat. Enjoy your Sunday 🤙🛥️🌴☀️
Cool boat Cant wait to see it on an open lake 🤙🛥️
Coming soon!
@@ModifiedRC0877are you making a recovery boat or buyin one?
@@OGPAPERBOY77 I’m making a simple PVC frame with Amazon electronics. I can’t justify the price of the Tug.
@@ModifiedRC0877you can make a zipkitts tugster But that pvc is the cheapest route
I like the color and details on this boat Cant wait to see it out 🤙🛥️
That would be disappointing considering it’s listed as waterproof and I did rinse out immediately with fresh water and then electronic spray. Prolly grab a mamba quick since I already have a Stump fab cooler in the tool box. Was gonna run this before deciding on a X8s. 🤷🏻♂️
Sweet Boat! I’ve heard of stories where Castle ESC stopped working after brackish water covers the circuit board. Some people say to rinse it off with freshwater and it will start working again. I think B has said this before too.
No bueno bro. Time for a new paint job
I’ll be smoothing out the damaged areas but not sure about paint. I really believe the decals saved the boat. They are thick pieces from Darkside.
Looking good should be strong
Your UL19 looks epic bro. New subscriber here Boatgang
Ty sir! I’ve been to your shop! Near SJ State. Used to live in Santa Clara. 😎
I hope it’s repairable that thing sounded perfect like you have the KV,prop and tune just right.
It’s is. I did a quick repair until the new boat comes in. Then I’ll repair it right.
😯😯😯
It enough hands! Camera started falling and not enough time to re-grab the remote.
@@ModifiedRC0877 hate to see it😢
Beautiful spot! Wish I had water in my backyard Id be charging batteries allday Thank you for sharing 🤙🛥️
Thanks! I’ve got a new spot I’ve been wanting to run at that’s not so dangerous.
Corrosion X has saved all my rcs and even my GNSS gps 🤙🛥️
Hey brudder that prop looks a lot like the 45mm Dr props I’m running too. Bummer about swamping I did that yesterday on my cat. You can use some epoxy to carefully add a ‘nipple’ ring around that cf tube. Or just use a small zip tie. Or use another piece of silicone around first piece like big b does
Its is the same. The 44 I have has to much rake. Yeah, I’ve already got some smaller tubes on the way. These are 8mm! The silicon tubes are being asked a little too much to fit around that size me thinks.
Just found your channel and subscribed
Thanks! Will have new content out soon, weather providing. Always windy in my neck of the woods so the waiting game is tough. Anything in particular you have questions on?
love the retrieval stick lolol
😂 Spare no expense!
Scaring me getting so close to the dock lol. Looks good bro. With your unconventional running spot a mono would be perfect. Kind of a tough spot to run a hydro😁
It’s tough to really understand changes with tide and current but it’s in the backyard so I just send it. There’s actually a park lake within 5 min from me but I’m lazy lol. I will prolly start going there for 6s runs and when I get another boat.
Forgot that the stock rudder was longer good reminder
😮😂 yay RIP morning !
2050kv is great because 6s is always an option. Great run brother! Which prop and turn fin? Or classified?
Doctor Prop 1644 and the stock fin with 15degree angle.
What is that?
Repair on the tip of a UL-19. I previously crashed it into the seawall. Fortunately I had a decal kit already and it saved the tip from ripping off. This boat is for sale and I’ll be running it on 6s to show performance. It will do mid to high 70’s
@@ModifiedRC0877 ohhhh ok it’s a boat
@@ModifiedRC0877 how much
@@EddieThe4rth $600