Great video .. I learned it can do by my own Thanks you
@FlevopolderAviatorКүн бұрын
Have a close look at the Cubsim installation video/instructions… no need to disassemble your TPR.
@chromaticmusicКүн бұрын
I say this in the video if you actually pay attention
@FlevopolderAviatorКүн бұрын
@@chromaticmusic yes I heard you saying this… and if you only paid attention to Cubsim their ‘no sound’ video it would had saved you a lot of trouble ;-) Still thanks for posting your video.
@rypacifica16434 күн бұрын
Will fender strat aftermarket parts fit in this strat? (Pickguard, backplate, etc.) Ty!
@chromaticmusic4 күн бұрын
The pick gaurd screw holes are pretty much based off of the same design so all manufacturers can make parts that are interchangeable. I've bought parts for my strats that were from Chinese companies and they all fit great. Just keep in mind that the vintage guitars 60s and earlier had less screws and the holes were in different places. So count the number of screw holes your guitar has and make sure they match up
@joeylodes9 күн бұрын
Great job 👏
@chromaticmusic8 күн бұрын
Thanks!
@jamesbutterworth43139 күн бұрын
Yuo should have played it , and the camera fuzzy out of focus at times
@chromaticmusic9 күн бұрын
It's a restore video, not a demo video. And as far as the fuzzy video I think it's your eyes that have gone bad
@elyandrade488611 күн бұрын
Great video, full of unvaluable information, thank you so much. The first guitar I bought my self after working for months as a janitor in a music store for months was a RGZ321FP (same blue methalic color than yours). Man, I loved that guitar so much but then started my "normal guy life" and I sell it in 2001. Yesterday I found my guitar on sale in a local online marketplace, not a simlilar one, it is the one I sold! It has the same scratches and different volume and tone knobs I puted on then (I still have the originals). I was uncertain on bought it again, but no more doubts now.
@chromaticmusic11 күн бұрын
I had a similar time
@jeffschmitt724412 күн бұрын
Sweeter setup than I ever had! Here's a vid for you... kzread.infoBbx5f2NIQ38?si=5npZXhiQhtgnbrn6 F-16 through the Norway fjords - fun!
@chromaticmusic12 күн бұрын
It's only getting bigger
@GrundleStiltSkin13 күн бұрын
i liked when your cat came in LOL!!
@chromaticmusic13 күн бұрын
Scarred the cat out of me
@davannagle45014 күн бұрын
Hi Chris, I followed your instructions to the 'T' with zero photo editing experience, and I just wanted to say thank you so much. I will order a 3rd MFD thanks to you.
@chromaticmusic14 күн бұрын
That's awesome man, so happy to have helped
@MA-ir8oc18 күн бұрын
Hi I have a guitar identical to this model and was wondering how do you fix the bridge so that the low strings don’t keep hitting the fret board. I’ve never strung a Floyd Rose before or done a set up on a guitar and it’s made it a bit harder to do since it is a hard to find guitar. Do you have any tips for a newbie on how to set this thing up/ adjust the bridge properly? I think the back spring tension is pulling the bridge down lower than it should be. I don’t want to damage it on accident . Thanks!
@chromaticmusic18 күн бұрын
Lucky for you yes! Here's a full video kzread.info/dash/bejne/qYupzJeYYMyXhrw.htmlsi=bDqnniAPqD9R7dIT
@CPD0123a20 күн бұрын
Just happened into an RGZ 112P for $125 at an indoor flea market guitar vendor. Needs some lovings because it's pretty dirty and kinda sticky, but when I plugged it in, I knew. My dad's favorite (now last) guitar is a Yamaha classical, so when I got into it, I really wanted a Yamaha. My Squier Strat, SSS, just wasn't keeping up for some things due to the buzz and it gets muddy on chords. But having a guitar with a humbucker is quite nice. So looking forward to seeing how it feels and sounds in real playing
That's great man. I'd be still buying more if I had the wall space lol. I posted a video of me completely restoring an RGX 621PR. FYI, the music in the background is me as well but I have a channel and play list how to restore guitars if you needed some tips and tricks.
@bradule198021 күн бұрын
Thx for this. Hows the quality and durability of those 3d printed parts that attach to the pedals?
@chromaticmusic21 күн бұрын
So far it's been great. Time will tell but everything is super solid
@Shred_The_Weapon25 күн бұрын
If I came into a first-generation Steinberger bass, one thing I would try to do in short order is have the headpiece upgraded to one from the Synapse line. There may be nothing wrong with double-ball end strings, but I’m kind of picky.
@chromaticmusic25 күн бұрын
If I played this bass as a regular everyday instrument I'd probably do the same but the value would be cut in half if I modded it
@Shred_The_Weapon25 күн бұрын
Point made, @@chromaticmusic.
@patschubert266228 күн бұрын
Really like your enthusiasm for yamaha rock guitars. I am lucky enough to own an RGX1212s with mahogany/maple five ply neck through construction and ebony fretboard that is an incredible playing guitar. Mine has the yamaha tuners and is indeed made in Taiwan but is excellent quality maybe even better than my Ibanez RG550 that was made in Japan. Thanks for pointing out that the "made in Taiwan " were excellent quality guitars too.
@chromaticmusic27 күн бұрын
That 1212 was on my list for a long time. After I made this video it got so many views that it actually changed the worlds view on these guitars and the prices skyrocketed. I could have gotten a Japanese 1212 for 500 usd and now they go for 1800. My personal collection after restoring them to better than factory has made them worth 4 times what I bought them for, and in some cases 10 times. Really I got lucky. I knew yamaha made great engines and pianos but had thought their guitars and basses were junk simply because no one ever endorsed them or saw them in major bands. But alas, I remember what the Japanese do best, improve not invent.
@gordonfifield6653Ай бұрын
Thank you, this may be my issue as well. Definitely a design flaw. Went to a vacuum shop and they had said this may have been the problem.
@djabthrashАй бұрын
Sounds fantastic
@PaulRekos-ws3zuАй бұрын
Thank you so much!!!!! I set everything up and it was not useable. The Target Pods and Mavricks just so disappointing. Reshading works perfect!!!!!!!! I can thank you enough
@chromaticmusicАй бұрын
Glad it worked! Hopefully DCS will continue to support this as lots of updates are coming but so far so good!
@enevarez1471Ай бұрын
Omg, thank you!!!
@chromaticmusicАй бұрын
Glad it worked!
@Xxmeca421xXАй бұрын
I wish it was more complicated lul
@chromaticmusicАй бұрын
Me too!
@GamjaFieldАй бұрын
Thank you so much
@chromaticmusicАй бұрын
Absolutely!
@OssssssssssssshАй бұрын
Great demo! It's refreshing to see you playing both chords and leads, which really showcases the tonal differences. Many demos focus solely on rhythm metal, making it hard to gauge the quality of the pickups. Good job, bro!
@chromaticmusicАй бұрын
Thanks man! Glad you enjoyed it. I need to do more
@johntse4071Ай бұрын
P0171/P0174 system lean, actually is you have a vacumm leak in the emission system. Make sure the vacumm hose is connected correctly their is a diagram on the hood. I fix my P0171/P0174 problem. O2 sensor will give you a specific code just for that.
@chromaticmusicАй бұрын
Good to know!
@halo20763Ай бұрын
Screw the pickguard down on a waste piece of mdf or similar. Should minimise the risk of flying pickguard and severed limbs 😉 Nice job btw
@chromaticmusicАй бұрын
That's me just being lazing and stupid. Lol, but that's sound advice man, thanks for the tip!
@halo20763Ай бұрын
@chromaticmusic I've just bought a new pickguard for my cheap experiment bass (everyone needs one). It fits amazingly snug wverywhere but....there's a gap near the output jack and one of the bottom screw points misses the wood so effectively need to add wood to slightly fill the routed/cavity area in order to fit the new pickguard. Scanned KZread for tips but found nothing. I'm going to cut and trim some wood up and glue it in so it's more or less flush to the body surface, paint it and use superglue as a lacquer finish (If any of that makes sense) So.. Any thoughts or tips?
@chromaticmusicАй бұрын
@halo20763 there's a really easy way to fix it. One method would simply use wooden tooth picks as a filler. Next is put cotton in the hole and then saturate it with super glue. Both work very well. Look up how to fill small holes with cotton and super glue, it will show you a ton of cool hacks
@halo20763Ай бұрын
@chromaticmusic ah no, it's not a hole as in a screw whole, the oickguard is to small and leaves a gap between itself and the body itself. Like an 8mm x 13mm gap, and the bottom screw hole on the pickguard hovers above the cavity.
@chromaticmusicАй бұрын
@halo20763 you could glue a small piece of wood in that area that could at as a piller
@jimtharp6556Ай бұрын
I happened upon one of these. I actually bought it for the hardshell case. I'm always in need of good cases. I own 80's Charvel's and Jackson's, a couple of USA fender Strats and so on. I really had no plans on keeping it until I played it for a while. Turns out I Loved it! I paid $100 for it in a real nice hard case. I just kind of fell into the deal and have been quite happy about it ever since. The guitar is one of the pure black ones with the ivory crazy stripes all over it and it's in really nice condition. Thanks for the informative video!
@chromaticmusicАй бұрын
Glad you found a deal!
@jasonmoore9968Ай бұрын
I've been using The Way, and I noticed they made an update that allows the F15E to work. I did that install and now, It seems like The Way is talking to DCS because when I go in game the header of the app displays the artwork of the module I'm using, however, when I go to F-10, I get no green dot when I go to start to make waypoints. It seems like the app is collecting waypoints, just no dot. Then, when I go to transfer to DCS, it does not do anything with the module. No action whatsoever... Any help is super appreciated!
@chromaticmusicАй бұрын
Not sure if the F15 will work. Plus there's an issue with razbam and ED working on updates. Does the dot work other aircrafts?
@jasonmoore9968Ай бұрын
@@chromaticmusic Actually no. I've had issues with it in the past, and I don't remember exactly what I did then, but I had it working. Then I randomly noticed they said the F15e was working in an update, so I took the update, and no bueno.
@chromaticmusicАй бұрын
@jasonmoore9968 yeah, good old DCS mods love to go nuts on you right after an update and patch
@jasonmoore9968Ай бұрын
@@chromaticmusic Ain't that the truth!
@BardeviousisbestАй бұрын
Sounds so much like Primus.
@jakeshuster6783Ай бұрын
cool guitar. The bridge is suppost to be in that position not flat. its not a floyd. its the egde.
@chromaticmusicАй бұрын
Really? That's awesome
@ebonyjordan90Ай бұрын
Im havin the same issue... i replace the catalytic converter and vsr n trac light still on... i order o2 sensors now i need to get them put on
@chromaticmusicАй бұрын
It said I needed to replace the cat as well but after putting in the 02 sensors the lights and messages went away.
@ebonyjordan90Ай бұрын
I had got the o2 sensor but a shop told me I didn't needed them I guess cause I'm a lady n I replace the cat 1st n then I seen for myself that the o2 was definitely bad... are you in atl area
@chromaticmusicАй бұрын
@@ebonyjordan90 I am
@fatwizard1234Ай бұрын
How do you get the little window to pop into DCS when in VR?
@fatwizard1234Ай бұрын
This is not VER.2 nether
@chromaticmusicАй бұрын
Only version 2 works with VR
@fatwizard1234Ай бұрын
@@chromaticmusic gottcha thanks
@BerakhАй бұрын
re 02:50 ish Turning your Right DDI off will push those Left DDI error messages onto the AMPCD centre screen
@BerakhАй бұрын
Better thing is to just fix the errors it's calling out though, in this set, T/O trim and rudder reset things by left thigh behind throttle should clear them.
@chromaticmusicАй бұрын
Thanks man!
@simonpaquin6338Ай бұрын
Will try, thanks !
@sith6111Ай бұрын
it dosent work the app says no connection
@chromaticmusicАй бұрын
You probably need to check the Lua file and make sure the data is there
Thank you for confirming this. Mine didn't show any wear but tapping on the wires at certain angles made it work. Internally the copper must be broken. Just hope I can repair the right "bad" section!
@zerotolerance4216Ай бұрын
Crushed it brother! 🔥🔥🔥
@chromaticmusicАй бұрын
Thanks man! Glad you liked it. Please let me know if you learn it. I'd love to see your video as well
@zachholt6830Ай бұрын
Ur really good too
@chromaticmusicАй бұрын
Thanks! Need to play more
@AlligatorTrader962 ай бұрын
Wtf every other video ddint work except for this one. They say to either do part 1 or part 2 if part 1 doesnt work. But you actually have to do both
@chromaticmusic2 ай бұрын
The reason I put this video up in the first place man. I found it so hard that if you missed one step you're screwed. Glad it helped
@pgnandt2 ай бұрын
Will this work with the old dip switch remotes with no learn button?
@chromaticmusic2 ай бұрын
Not sure. Full disclosure I did this with 3 houses that I was in and the 2nd house, old and kinda crappy rental just never worked. There's a few people that tried this and couldn't make it work either which I have no control over but it's helped a bunch of others so still helpful overall. But yes, it's not a guarantee that it will work for everyone
@hladamjrify2 ай бұрын
Obviously you didn't watch the installation video.......
@chromaticmusic2 ай бұрын
Obviously you didn't watch this video as I said in this video I watched it but it had no sound and it was shorter in the beginning to where I didn't see the 1st section. But thanks for being a troll, the world is better with trolls
@kennethgrant33992 ай бұрын
I have 2005 330rx lexus check light on code p0016 and p0018 and i take to 3 shops and i cant get fix
@chromaticmusic2 ай бұрын
Do you have the bluedriver? You can get them on Amazon for 100. Works on both iPhone and android. Reads the deep codes and even shows where to get the parts and links to support sites. Saved me thousands
@magnitudefallout39442 ай бұрын
I do not understand the concept of trash-fixing an issue and praising it as a miraculous feature. Using reshade to tweak screen brightness is like powering an additional 64 core CPU to calculate 2 + 2 every single frame. The performance cost aside, such "fix" completely disables the option to set MDIs to day/night mode, and if you want to fly at night? Enjoy 3 flashbangs. The correct solution, is to find software that enables USB monitor color correction, like Nvidia Control Panel. And the right thing to do for a user, is to send a message to WINWING directly so they add the settings to SimAppPro.
@chromaticmusic2 ай бұрын
You sound like you have all the solutions! Please post a video like I did with those solutions and join the world of helpful people that take the time to film, edit and train others for free to make the world a better place.
@rcoplien2 ай бұрын
Awesome but don't you want the screens to follow the motions to match?
@chromaticmusic2 ай бұрын
Not sure what you mean. The winwing software handles the MFD screens for over 10 planes. The screen display the same as the in game so not sure what you're referring to.
@p47paul2 ай бұрын
It’s 2024 and I’ve never played a better neck than the RGZ 621 PR. Can anyone recommend a modern day superstrat HSH that feels like the RGZ neck and is also high quality?
@chromaticmusic2 ай бұрын
That my friend is Yamaha. They all just feel that good. It's so funny that they build pianos for Elton john but guitars for no one but just as good as their pianos
@p47paul2 ай бұрын
@@chromaticmusic That’s so crazy! God how I wish I could pay Yamaha to make me a modern custom RGZ today! I’d pay in a heartbeat!
@chromaticmusic2 ай бұрын
@@p47paul I'd look at the rgz and yg o. Ebay and reverb. There's also a ton of them on Japanese auctions that are in great shape.
@p47paul2 ай бұрын
@@chromaticmusicThanks, Chris! Nice to talk with someone who has the passion and expertise with these RGZ guitars! You get me. 😁
@chromaticmusic2 ай бұрын
@p47paul right back at you! Did you see some of my other yamaha videos? Tons of data and restore videos
@DavidColex2 ай бұрын
That fizzing sound at 4:30ish is a characteristic of all el84 amps without negative feedback. I have an 18Watt Marshall and it does the same thing.
@DavidColex2 ай бұрын
Also, what did you have in the signal chain?
@chromaticmusic2 ай бұрын
Don't remember lol. I could have been just the amp but I did make a couple clones of KoT AND KLON. Not sure if that made any real difference but I'm happy with it either way
@DavidColex2 ай бұрын
Its one of the best sounding sounds lol I've heard. What about the speakers?@@chromaticmusic
@chromaticmusic2 ай бұрын
@DavidColex for the video I was going into an cab sim so no microphone was used on this video.
@gmlegend1852 ай бұрын
What did you soak the hardware in? And what did you use to get the body so shiny? Lovely work!
@chromaticmusic2 ай бұрын
Dw40 in a tin for 24 hours. Buffed the guitar with scratch doctor and a high speed pad and used a clear coat spray for the final top coat.
@tedrobinson38022 ай бұрын
Ok, you talked me into it.
@chromaticmusic2 ай бұрын
Not bad as a 1st build
@trncel2 ай бұрын
Thank you!!!
@chromaticmusic2 ай бұрын
Glad it worked!
@hernzo97982 ай бұрын
Is this 80 mm mount standard is 74mm hard to find a compatible without having put in rod dowel and re drilling the mounting points.
@butterfliege8852 ай бұрын
I tried downloading it on my own without tutorial then i found your video and now when i try to launch the installer it says failed to uninstall old application files please try running the installer again.
@chromaticmusic2 ай бұрын
Yeah, this video is now a bit outdated due to the updates from dcs. You need to remove the old way, download the 2.0 way and make sure you add all the correct information to the Lua file. Dcs over writes it after the update bit I got the 2.0 to work after a ton of screwing around.
@butterfliege8852 ай бұрын
@@chromaticmusic yeah no i couldnt figure it out man. i gave up for right now.
@chromaticmusic2 ай бұрын
@butterfliege885 we could link up on Discord to see if that helps. I'm sure it's simple. I can just look at my settings and check yours. Keep in mind that windows security setting can cause major issues as well
@butterfliege8852 ай бұрын
@@chromaticmusic Yeah sure just not my rn my tag is "_butterfliege"
Пікірлер
Great video .. I learned it can do by my own Thanks you
Have a close look at the Cubsim installation video/instructions… no need to disassemble your TPR.
I say this in the video if you actually pay attention
@@chromaticmusic yes I heard you saying this… and if you only paid attention to Cubsim their ‘no sound’ video it would had saved you a lot of trouble ;-) Still thanks for posting your video.
Will fender strat aftermarket parts fit in this strat? (Pickguard, backplate, etc.) Ty!
The pick gaurd screw holes are pretty much based off of the same design so all manufacturers can make parts that are interchangeable. I've bought parts for my strats that were from Chinese companies and they all fit great. Just keep in mind that the vintage guitars 60s and earlier had less screws and the holes were in different places. So count the number of screw holes your guitar has and make sure they match up
Great job 👏
Thanks!
Yuo should have played it , and the camera fuzzy out of focus at times
It's a restore video, not a demo video. And as far as the fuzzy video I think it's your eyes that have gone bad
Great video, full of unvaluable information, thank you so much. The first guitar I bought my self after working for months as a janitor in a music store for months was a RGZ321FP (same blue methalic color than yours). Man, I loved that guitar so much but then started my "normal guy life" and I sell it in 2001. Yesterday I found my guitar on sale in a local online marketplace, not a simlilar one, it is the one I sold! It has the same scratches and different volume and tone knobs I puted on then (I still have the originals). I was uncertain on bought it again, but no more doubts now.
I had a similar time
Sweeter setup than I ever had! Here's a vid for you... kzread.infoBbx5f2NIQ38?si=5npZXhiQhtgnbrn6 F-16 through the Norway fjords - fun!
It's only getting bigger
i liked when your cat came in LOL!!
Scarred the cat out of me
Hi Chris, I followed your instructions to the 'T' with zero photo editing experience, and I just wanted to say thank you so much. I will order a 3rd MFD thanks to you.
That's awesome man, so happy to have helped
Hi I have a guitar identical to this model and was wondering how do you fix the bridge so that the low strings don’t keep hitting the fret board. I’ve never strung a Floyd Rose before or done a set up on a guitar and it’s made it a bit harder to do since it is a hard to find guitar. Do you have any tips for a newbie on how to set this thing up/ adjust the bridge properly? I think the back spring tension is pulling the bridge down lower than it should be. I don’t want to damage it on accident . Thanks!
Lucky for you yes! Here's a full video kzread.info/dash/bejne/qYupzJeYYMyXhrw.htmlsi=bDqnniAPqD9R7dIT
Just happened into an RGZ 112P for $125 at an indoor flea market guitar vendor. Needs some lovings because it's pretty dirty and kinda sticky, but when I plugged it in, I knew. My dad's favorite (now last) guitar is a Yamaha classical, so when I got into it, I really wanted a Yamaha. My Squier Strat, SSS, just wasn't keeping up for some things due to the buzz and it gets muddy on chords. But having a guitar with a humbucker is quite nice. So looking forward to seeing how it feels and sounds in real playing
kzread.info/dash/bejne/p6yrrtSraKXIo9I.htmlsi=sU1omAVp0PqkcJkC
That's great man. I'd be still buying more if I had the wall space lol. I posted a video of me completely restoring an RGX 621PR. FYI, the music in the background is me as well but I have a channel and play list how to restore guitars if you needed some tips and tricks.
Thx for this. Hows the quality and durability of those 3d printed parts that attach to the pedals?
So far it's been great. Time will tell but everything is super solid
If I came into a first-generation Steinberger bass, one thing I would try to do in short order is have the headpiece upgraded to one from the Synapse line. There may be nothing wrong with double-ball end strings, but I’m kind of picky.
If I played this bass as a regular everyday instrument I'd probably do the same but the value would be cut in half if I modded it
Point made, @@chromaticmusic.
Really like your enthusiasm for yamaha rock guitars. I am lucky enough to own an RGX1212s with mahogany/maple five ply neck through construction and ebony fretboard that is an incredible playing guitar. Mine has the yamaha tuners and is indeed made in Taiwan but is excellent quality maybe even better than my Ibanez RG550 that was made in Japan. Thanks for pointing out that the "made in Taiwan " were excellent quality guitars too.
That 1212 was on my list for a long time. After I made this video it got so many views that it actually changed the worlds view on these guitars and the prices skyrocketed. I could have gotten a Japanese 1212 for 500 usd and now they go for 1800. My personal collection after restoring them to better than factory has made them worth 4 times what I bought them for, and in some cases 10 times. Really I got lucky. I knew yamaha made great engines and pianos but had thought their guitars and basses were junk simply because no one ever endorsed them or saw them in major bands. But alas, I remember what the Japanese do best, improve not invent.
Thank you, this may be my issue as well. Definitely a design flaw. Went to a vacuum shop and they had said this may have been the problem.
Sounds fantastic
Thank you so much!!!!! I set everything up and it was not useable. The Target Pods and Mavricks just so disappointing. Reshading works perfect!!!!!!!! I can thank you enough
Glad it worked! Hopefully DCS will continue to support this as lots of updates are coming but so far so good!
Omg, thank you!!!
Glad it worked!
I wish it was more complicated lul
Me too!
Thank you so much
Absolutely!
Great demo! It's refreshing to see you playing both chords and leads, which really showcases the tonal differences. Many demos focus solely on rhythm metal, making it hard to gauge the quality of the pickups. Good job, bro!
Thanks man! Glad you enjoyed it. I need to do more
P0171/P0174 system lean, actually is you have a vacumm leak in the emission system. Make sure the vacumm hose is connected correctly their is a diagram on the hood. I fix my P0171/P0174 problem. O2 sensor will give you a specific code just for that.
Good to know!
Screw the pickguard down on a waste piece of mdf or similar. Should minimise the risk of flying pickguard and severed limbs 😉 Nice job btw
That's me just being lazing and stupid. Lol, but that's sound advice man, thanks for the tip!
@chromaticmusic I've just bought a new pickguard for my cheap experiment bass (everyone needs one). It fits amazingly snug wverywhere but....there's a gap near the output jack and one of the bottom screw points misses the wood so effectively need to add wood to slightly fill the routed/cavity area in order to fit the new pickguard. Scanned KZread for tips but found nothing. I'm going to cut and trim some wood up and glue it in so it's more or less flush to the body surface, paint it and use superglue as a lacquer finish (If any of that makes sense) So.. Any thoughts or tips?
@halo20763 there's a really easy way to fix it. One method would simply use wooden tooth picks as a filler. Next is put cotton in the hole and then saturate it with super glue. Both work very well. Look up how to fill small holes with cotton and super glue, it will show you a ton of cool hacks
@chromaticmusic ah no, it's not a hole as in a screw whole, the oickguard is to small and leaves a gap between itself and the body itself. Like an 8mm x 13mm gap, and the bottom screw hole on the pickguard hovers above the cavity.
@halo20763 you could glue a small piece of wood in that area that could at as a piller
I happened upon one of these. I actually bought it for the hardshell case. I'm always in need of good cases. I own 80's Charvel's and Jackson's, a couple of USA fender Strats and so on. I really had no plans on keeping it until I played it for a while. Turns out I Loved it! I paid $100 for it in a real nice hard case. I just kind of fell into the deal and have been quite happy about it ever since. The guitar is one of the pure black ones with the ivory crazy stripes all over it and it's in really nice condition. Thanks for the informative video!
Glad you found a deal!
I've been using The Way, and I noticed they made an update that allows the F15E to work. I did that install and now, It seems like The Way is talking to DCS because when I go in game the header of the app displays the artwork of the module I'm using, however, when I go to F-10, I get no green dot when I go to start to make waypoints. It seems like the app is collecting waypoints, just no dot. Then, when I go to transfer to DCS, it does not do anything with the module. No action whatsoever... Any help is super appreciated!
Not sure if the F15 will work. Plus there's an issue with razbam and ED working on updates. Does the dot work other aircrafts?
@@chromaticmusic Actually no. I've had issues with it in the past, and I don't remember exactly what I did then, but I had it working. Then I randomly noticed they said the F15e was working in an update, so I took the update, and no bueno.
@jasonmoore9968 yeah, good old DCS mods love to go nuts on you right after an update and patch
@@chromaticmusic Ain't that the truth!
Sounds so much like Primus.
cool guitar. The bridge is suppost to be in that position not flat. its not a floyd. its the egde.
Really? That's awesome
Im havin the same issue... i replace the catalytic converter and vsr n trac light still on... i order o2 sensors now i need to get them put on
It said I needed to replace the cat as well but after putting in the 02 sensors the lights and messages went away.
I had got the o2 sensor but a shop told me I didn't needed them I guess cause I'm a lady n I replace the cat 1st n then I seen for myself that the o2 was definitely bad... are you in atl area
@@ebonyjordan90 I am
How do you get the little window to pop into DCS when in VR?
This is not VER.2 nether
Only version 2 works with VR
@@chromaticmusic gottcha thanks
re 02:50 ish Turning your Right DDI off will push those Left DDI error messages onto the AMPCD centre screen
Better thing is to just fix the errors it's calling out though, in this set, T/O trim and rudder reset things by left thigh behind throttle should clear them.
Thanks man!
Will try, thanks !
it dosent work the app says no connection
You probably need to check the Lua file and make sure the data is there
kzread.info/dash/bejne/nGSBpLuahdLbdto.htmlsi=me40d8-1Lzun8wRm
thanks alot
Thank you for confirming this. Mine didn't show any wear but tapping on the wires at certain angles made it work. Internally the copper must be broken. Just hope I can repair the right "bad" section!
Crushed it brother! 🔥🔥🔥
Thanks man! Glad you liked it. Please let me know if you learn it. I'd love to see your video as well
Ur really good too
Thanks! Need to play more
Wtf every other video ddint work except for this one. They say to either do part 1 or part 2 if part 1 doesnt work. But you actually have to do both
The reason I put this video up in the first place man. I found it so hard that if you missed one step you're screwed. Glad it helped
Will this work with the old dip switch remotes with no learn button?
Not sure. Full disclosure I did this with 3 houses that I was in and the 2nd house, old and kinda crappy rental just never worked. There's a few people that tried this and couldn't make it work either which I have no control over but it's helped a bunch of others so still helpful overall. But yes, it's not a guarantee that it will work for everyone
Obviously you didn't watch the installation video.......
Obviously you didn't watch this video as I said in this video I watched it but it had no sound and it was shorter in the beginning to where I didn't see the 1st section. But thanks for being a troll, the world is better with trolls
I have 2005 330rx lexus check light on code p0016 and p0018 and i take to 3 shops and i cant get fix
Do you have the bluedriver? You can get them on Amazon for 100. Works on both iPhone and android. Reads the deep codes and even shows where to get the parts and links to support sites. Saved me thousands
I do not understand the concept of trash-fixing an issue and praising it as a miraculous feature. Using reshade to tweak screen brightness is like powering an additional 64 core CPU to calculate 2 + 2 every single frame. The performance cost aside, such "fix" completely disables the option to set MDIs to day/night mode, and if you want to fly at night? Enjoy 3 flashbangs. The correct solution, is to find software that enables USB monitor color correction, like Nvidia Control Panel. And the right thing to do for a user, is to send a message to WINWING directly so they add the settings to SimAppPro.
You sound like you have all the solutions! Please post a video like I did with those solutions and join the world of helpful people that take the time to film, edit and train others for free to make the world a better place.
Awesome but don't you want the screens to follow the motions to match?
Not sure what you mean. The winwing software handles the MFD screens for over 10 planes. The screen display the same as the in game so not sure what you're referring to.
It’s 2024 and I’ve never played a better neck than the RGZ 621 PR. Can anyone recommend a modern day superstrat HSH that feels like the RGZ neck and is also high quality?
That my friend is Yamaha. They all just feel that good. It's so funny that they build pianos for Elton john but guitars for no one but just as good as their pianos
@@chromaticmusic That’s so crazy! God how I wish I could pay Yamaha to make me a modern custom RGZ today! I’d pay in a heartbeat!
@@p47paul I'd look at the rgz and yg o. Ebay and reverb. There's also a ton of them on Japanese auctions that are in great shape.
@@chromaticmusicThanks, Chris! Nice to talk with someone who has the passion and expertise with these RGZ guitars! You get me. 😁
@p47paul right back at you! Did you see some of my other yamaha videos? Tons of data and restore videos
That fizzing sound at 4:30ish is a characteristic of all el84 amps without negative feedback. I have an 18Watt Marshall and it does the same thing.
Also, what did you have in the signal chain?
Don't remember lol. I could have been just the amp but I did make a couple clones of KoT AND KLON. Not sure if that made any real difference but I'm happy with it either way
Its one of the best sounding sounds lol I've heard. What about the speakers?@@chromaticmusic
@DavidColex for the video I was going into an cab sim so no microphone was used on this video.
What did you soak the hardware in? And what did you use to get the body so shiny? Lovely work!
Dw40 in a tin for 24 hours. Buffed the guitar with scratch doctor and a high speed pad and used a clear coat spray for the final top coat.
Ok, you talked me into it.
Not bad as a 1st build
Thank you!!!
Glad it worked!
Is this 80 mm mount standard is 74mm hard to find a compatible without having put in rod dowel and re drilling the mounting points.
I tried downloading it on my own without tutorial then i found your video and now when i try to launch the installer it says failed to uninstall old application files please try running the installer again.
Yeah, this video is now a bit outdated due to the updates from dcs. You need to remove the old way, download the 2.0 way and make sure you add all the correct information to the Lua file. Dcs over writes it after the update bit I got the 2.0 to work after a ton of screwing around.
@@chromaticmusic yeah no i couldnt figure it out man. i gave up for right now.
@butterfliege885 we could link up on Discord to see if that helps. I'm sure it's simple. I can just look at my settings and check yours. Keep in mind that windows security setting can cause major issues as well
@@chromaticmusic Yeah sure just not my rn my tag is "_butterfliege"