About to order a couple frames regardless, this covers the details when they arrive, Appreciated.
@iconindexsymbol6 ай бұрын
Nice Quoddy boat shoes.
@willyuan110 ай бұрын
what size screw is that?
@spiderz81 Жыл бұрын
My new vehicle has a platform on the front were the license plate goes that has 2 patruding digits at the top and it pushes on the Fram making the two upper sides stick out? Does that mean it's not meant to have a frame on it? I'm not sure what this is can you shed some light..If there is anyway I can send you a picture I think you would see what I'm talking about.
@arlemciv Жыл бұрын
Follow instructions
@daisy33842 жыл бұрын
Thank you.... had hoped video would include installing with anti theft screws for front of car. My rear personalized plate was stolen. California Dept of Motor Vehicles sad if the thief had also stolen my front plate, I would no longer be able to keep my personalization. If I can't have anti-theft screws, I'd rather pay the fine for not wearing a front plate
@nosensetj2 жыл бұрын
so just screw it on, got ya
@MarcWNY2 жыл бұрын
On a C8 Corvette the front plate has to be bent slightly to fit into the profile of the front end. Does this frame allow for a slight bend?
@kdbrown7772 жыл бұрын
Super professional video - much appreciated!
@ga209042 жыл бұрын
Why do we need to put a license plate on the front of our cars? I noticed that Tesla's don't have a front license Plate.
@evalee8097 Жыл бұрын
Stupid California requires front license plate.
@spaggs2 жыл бұрын
Hey there, I am trying to remove these screw caps from my father in laws car but I can’t for the life of me figure it out. I have the Allen wrench with the two prongs. Any help please??
@AgentOffice2 жыл бұрын
Try torx
@AMadd3RHatt3R3 жыл бұрын
I wish the angles were better, closer. I can't see what's happening
@oscarvillaescusa3811Ай бұрын
Fr
@franciscochavez17093 жыл бұрын
What shoes are those?
@SSI19113 жыл бұрын
I like that pad for the license plate, who offers this as all my license plate frames I have tried are to close on my 991 and touch, I want to create more space to avoid the plate frame from contacting the paint.
@Rolphpark693 жыл бұрын
Nice product. Ordered after watching this video. The screw covers that come with the plates are different than the snap on types in the video. After watching this video I assumed they were also snap on. Couldn't pull them apart and almost went the screwdriver route to pry them open and would have ruined them. They are threaded and better than snap on. Suggestion: Perhaps a little sticker could be put on the plastic packaging that they come in "unscrew caps".
@randomrazr3 жыл бұрын
ever tried the weather tech waterproof covers?
@camisascaautomotivemanufac72123 жыл бұрын
Hello Randomrazr, Thanks for your comment - no we have not tried the product you've mentioned. We do offer a UV & Impact Resistant Plate Shield made from Anti-Scratch Coated Clear Polycarbonate for additional protection. This is available on our webstore at: www.camincstore.com/shop/uv-resistant-clear-plate-lens-shield Thanks for viewing! CAMI Marketing Team
@sebula93 жыл бұрын
'i was looking for full mounting part and the silly little frame what the heck
@camisascaautomotivemanufac72123 жыл бұрын
Hello Sebastian, Thank you for your comment. Is there something we can assist you with? We are a domestic manufacturer of OEM quality License Plate Frames and other automotive trim accessories for vehicle manufacturers worldwide. We would be happy to help you if you have an application concern? Perhaps visit our FAQ at our website here: www.camincstore.com/faq Please let us know - thank you, CAMI Marketing Team
@reachadi10293 жыл бұрын
Dude $7.50 to ship Hardware Hider Caps, but the cost for the item is $5.40?! You've got to be kidding!
@camisascaautomotivemanufac72123 жыл бұрын
Hello Adi, Thank you for your comment - yes we quite agree freight costs these days are on the up and up! Unfortunately in order to offer tracking to enrich our customer experience this is the most economical option for a small light weight part. Thankfully we are able to offer free shipping for orders of $50 or more. We hope we can serve you again soon. Thank you for your business, CAMI Marketing Team
@bobushboryn9823 жыл бұрын
Hi Colin - Bob here - from Long Sault with my 2017 Alfa Q4 - licence plate frame still looking great, best regards, Ciao
@camisascaautomotivemanufac72123 жыл бұрын
Hi Bob, Great to hear! Hope you are doing well.
@jekowsky4 жыл бұрын
This is so useful! Awesome product.
@camisascaautomotivemanufac72124 жыл бұрын
Thanks Matthew! We appreciate your comment. If you'd like to purchase a Universal Trunk Handle feel free to click the product link here: www.camincstore.com/shop/universal-trunk-handle
@aayotechnology4 жыл бұрын
Why did you bother to add the four spacers if the whole plate sits on a pad?
@henrycamisasca87633 жыл бұрын
In addition to offsetting your plate and frame from your vehicle where needed, the spacers keep the frame face mounting tabs from bending inwards.
@ItsJessie9154 жыл бұрын
hey so i am trying to install a blinged out license plate cover onto my 2015 jetta but cant please help
@henrycamisasca87633 жыл бұрын
Unfortunately we can not assist you with a non-Camisasca frame. We have no way of knowing the frame design will fit properly on your vehicle without installation aids that come with the purchase of our line of frames.
@ryanangel62274 жыл бұрын
I love my mask hook. I use it everyday driving to work!
@camisascaautomotivemanufac72123 жыл бұрын
Thanks Ryan! During these challenging times for everybody, we are so happy to provide any amount of ease we can. Enjoy!
@ryanangel62274 жыл бұрын
Wow! Such a useful product
@camisascaautomotivemanufac72123 жыл бұрын
Thanks Ryan! Simple but certainly handy, we are so glad you approve! Thanks for your business.
@ranikalakaar4 жыл бұрын
Niceli presented. Thank u
@camisascaautomotivemanufac72123 жыл бұрын
Thank you Ranikalakaar - we hope this video was helpful for you! We appreciate the positive feedback, CAMI Marketing Team
@jaysnyder73674 жыл бұрын
This is a wonderful video. You'd think that installing a license plate from would be a no brainer, but not necessarily. Example: I did not know that the rubber bumpers go on the back of the license plate to cut down on vibration. I will be reinstalling my frame with the rubber bumpers this time.
@uglypoe4 жыл бұрын
Where to get the rubber spacers?
@camisascaautomotivemanufac72124 жыл бұрын
www.camincstore.com/shop/hardware-hiders Sets of two include antivibration rubber bumper spacers.
Пікірлер
About to order a couple frames regardless, this covers the details when they arrive, Appreciated.
Nice Quoddy boat shoes.
what size screw is that?
My new vehicle has a platform on the front were the license plate goes that has 2 patruding digits at the top and it pushes on the Fram making the two upper sides stick out? Does that mean it's not meant to have a frame on it? I'm not sure what this is can you shed some light..If there is anyway I can send you a picture I think you would see what I'm talking about.
Follow instructions
Thank you.... had hoped video would include installing with anti theft screws for front of car. My rear personalized plate was stolen. California Dept of Motor Vehicles sad if the thief had also stolen my front plate, I would no longer be able to keep my personalization. If I can't have anti-theft screws, I'd rather pay the fine for not wearing a front plate
so just screw it on, got ya
On a C8 Corvette the front plate has to be bent slightly to fit into the profile of the front end. Does this frame allow for a slight bend?
Super professional video - much appreciated!
Why do we need to put a license plate on the front of our cars? I noticed that Tesla's don't have a front license Plate.
Stupid California requires front license plate.
Hey there, I am trying to remove these screw caps from my father in laws car but I can’t for the life of me figure it out. I have the Allen wrench with the two prongs. Any help please??
Try torx
I wish the angles were better, closer. I can't see what's happening
Fr
What shoes are those?
I like that pad for the license plate, who offers this as all my license plate frames I have tried are to close on my 991 and touch, I want to create more space to avoid the plate frame from contacting the paint.
Nice product. Ordered after watching this video. The screw covers that come with the plates are different than the snap on types in the video. After watching this video I assumed they were also snap on. Couldn't pull them apart and almost went the screwdriver route to pry them open and would have ruined them. They are threaded and better than snap on. Suggestion: Perhaps a little sticker could be put on the plastic packaging that they come in "unscrew caps".
ever tried the weather tech waterproof covers?
Hello Randomrazr, Thanks for your comment - no we have not tried the product you've mentioned. We do offer a UV & Impact Resistant Plate Shield made from Anti-Scratch Coated Clear Polycarbonate for additional protection. This is available on our webstore at: www.camincstore.com/shop/uv-resistant-clear-plate-lens-shield Thanks for viewing! CAMI Marketing Team
'i was looking for full mounting part and the silly little frame what the heck
Hello Sebastian, Thank you for your comment. Is there something we can assist you with? We are a domestic manufacturer of OEM quality License Plate Frames and other automotive trim accessories for vehicle manufacturers worldwide. We would be happy to help you if you have an application concern? Perhaps visit our FAQ at our website here: www.camincstore.com/faq Please let us know - thank you, CAMI Marketing Team
Dude $7.50 to ship Hardware Hider Caps, but the cost for the item is $5.40?! You've got to be kidding!
Hello Adi, Thank you for your comment - yes we quite agree freight costs these days are on the up and up! Unfortunately in order to offer tracking to enrich our customer experience this is the most economical option for a small light weight part. Thankfully we are able to offer free shipping for orders of $50 or more. We hope we can serve you again soon. Thank you for your business, CAMI Marketing Team
Hi Colin - Bob here - from Long Sault with my 2017 Alfa Q4 - licence plate frame still looking great, best regards, Ciao
Hi Bob, Great to hear! Hope you are doing well.
This is so useful! Awesome product.
Thanks Matthew! We appreciate your comment. If you'd like to purchase a Universal Trunk Handle feel free to click the product link here: www.camincstore.com/shop/universal-trunk-handle
Why did you bother to add the four spacers if the whole plate sits on a pad?
In addition to offsetting your plate and frame from your vehicle where needed, the spacers keep the frame face mounting tabs from bending inwards.
hey so i am trying to install a blinged out license plate cover onto my 2015 jetta but cant please help
Unfortunately we can not assist you with a non-Camisasca frame. We have no way of knowing the frame design will fit properly on your vehicle without installation aids that come with the purchase of our line of frames.
I love my mask hook. I use it everyday driving to work!
Thanks Ryan! During these challenging times for everybody, we are so happy to provide any amount of ease we can. Enjoy!
Wow! Such a useful product
Thanks Ryan! Simple but certainly handy, we are so glad you approve! Thanks for your business.
Niceli presented. Thank u
Thank you Ranikalakaar - we hope this video was helpful for you! We appreciate the positive feedback, CAMI Marketing Team
This is a wonderful video. You'd think that installing a license plate from would be a no brainer, but not necessarily. Example: I did not know that the rubber bumpers go on the back of the license plate to cut down on vibration. I will be reinstalling my frame with the rubber bumpers this time.
Where to get the rubber spacers?
www.camincstore.com/shop/hardware-hiders Sets of two include antivibration rubber bumper spacers.