Looks easy enough.but wait. Does it turn the right color sitting in the water pan-i wait for the straw color and then a tiny bit more to get the neck and dump into a pan. Using the cordless drill and socket approach.
@Outdoorswithmike11 күн бұрын
Awesome educational video was very helpful. Thank you.
@JaredHempfield15 күн бұрын
It's actually supposed to be 3 gallons of water to 2.5 pounds of gelatin, not sure why I thought the last time I did it was 2.5 gallons
@HammerHeadGarage18 күн бұрын
Where did you get that coffee grinder?
@JaredHempfield18 күн бұрын
Amazon
@Johnny-jr2lq24 күн бұрын
I have about 300 pieces of this crap from like 9 years ago now. It came from Field&Stream before they went outta business. Broke 2 of my Dillon pins on it
@Johnny-jr2lq24 күн бұрын
Seriously been thinking about BP since I watched everything black powder’s video. Very appealing to be able to make you own powder and if you get a flint lock no more primers. In today’s market that’s a HUGE SAVINGS
@Johnny-jr2lq24 күн бұрын
Bro KZread will mot let me subscribe to your channel. This is some BS
@Johnny-jr2lq24 күн бұрын
Was looking at this mold and his 7.62x39. It says 2 to 3 weeks if I order should I just expect 2 to 3 months????
@JaredHempfield23 күн бұрын
Expect 2 months, tested these 77(75gr) sunday at 100yds with 20gr of Benchmark, theyre pretty accurate but it was way too windy to tell
@Johnny-jr2lq24 күн бұрын
Wish Elvis would drop a new vid can’t blame him for not though.
@ProPyroPower26 күн бұрын
Awesome!!
@elmbow29 күн бұрын
So in order to use these you need unscrew the little silver anvil doohickey, break your fingernails under the spent 209 primer attempting to dislodge it, and repeat? So plan on adding more time to your loading procedure and of course that little silver anvil doohickey is begging to be dropped in the dirt at your feet. I think I’ll stick with #11s. When you find them lay up a lifetime’s worth. Plan, plan, plan.
@JaredHempfield28 күн бұрын
I only used this for a short period when I couldn't find caps whatsoever. I have since made my own swaging spent large rifle cups or from aluminum cans. i'm not paying $30 for 100 caps when I can make them for a few cents a piece. this has its disadvantages but also would be great if you don't want a cap falling off while hunting, much higher ignition rate as well
@user-sh7rp4rb4xАй бұрын
Ola , estou aprendendo bastante com os vídeos que vejo no KZread Os seus são muito instrutivos Uma pergunta , após refunar o composto ,o senhor os granula novamente ?
@maxfaubus3116Ай бұрын
Good idea. Thanks
@SilverSnifferАй бұрын
Do you powder coat those? How much velocity are you pushing them to? How is the accuracy?
@JaredHempfieldАй бұрын
I will be coating like always, using Benchmark maybe 21gr, will see on the accuracy. Ive been pushing the 55gr too hot getting flyers. Hoping these heavy handers will achieve tighter groups but its going to take some time. I was really just using the 55gr casts even 4gr over max data to fuck around mag dumping. I want to see how these do
@tims6212Ай бұрын
Nice! Yup. I use a leather mallet. Works well for the sprue plate.
@JaredHempfieldАй бұрын
I use a billy club, works great
@kmackissАй бұрын
What ever happened to Elvis Ammo on KZread ?
@tims6212Ай бұрын
I saw him on a live chat once a few months back. He still loads. Got tired of the YT gestapo deleting his vids. He took his ball and left for the hills. Hello uuutttuuubbbeee! Elvis ammo here!
@MegaMarclarАй бұрын
Curious how long you cook the tp in the can for, until it stops shooting flames out? Or a certain amount of time. I've been trying this strategy by throwing paint cans in fire but it's just destroying my cans I want to use the propane stove instead but I'm just not sure how long to cook it
@JaredHempfieldАй бұрын
A rolling fire is too hot, embers is all you need. I cook until the smoke stops, about an hour or more on the propane grill, I remove the grate, flame shield and set can right on the burner on high. Not allowing flame to ignite the gasifying. Hemp bast fiber is my best charcoal so far, faster than toilet paper. Even hemp hurds was faster.
@MegaMarclarАй бұрын
@@JaredHempfield I tried it in my stove last night, seems like it's overchared and maybe even burnt a bit inside. Going to re try with my propane like you did.
@JaredHempfieldАй бұрын
@@MegaMarclar By burnt you mean turned to ash? Sounds like it back drafted some. Plug the hole as soon as it stops smoking to prevent that. Ive taken off every 15 minutes and given a good shake to loosen it all up for an even pyrolyze. Good luck
@JaredHempfieldАй бұрын
@@MegaMarclar I'll be making more bast fiber char tomorrow, will post a video
@ProPyroPowerАй бұрын
You got way to much fun with all that candy lol ;p
@earlyorlaterАй бұрын
Guess ill be the first comment, and ill use this comment to say it first. NICE BALLS SIR!😅
@JaredHempfieldАй бұрын
Thanks 😁 Now all I need is the cannon. One made a nice lifter weight knob for the 20lb Lee pot, not dripping anynore
@echota23Ай бұрын
7 week wait wow that's sucks
@SilverSnifferАй бұрын
Where did you get the brass knob?
@JaredHempfieldАй бұрын
I casted it from brass using a billiard ball in a sand mold
@SilverSnifferАй бұрын
@@JaredHempfield What a great idea, solves the drip problem?
@JaredHempfieldАй бұрын
@@SilverSniffer For sure, eliminated!
@ProPyroPowerАй бұрын
@davinci1437Ай бұрын
Beautiful ammo 😮 Salute Eb South africa 🇿🇦 ❤️
@JaredHempfieldАй бұрын
Thanks, they came out to nearly 2500fps
@ProPyroPowerАй бұрын
Awesome! very curious indeed
@ProPyroPowerАй бұрын
Thats incredibly fast, stuff pops like Flash 🎉🎉
@JaredHempfieldАй бұрын
Open air tests aint the best to tell but judging from the willow, bamboo, cottonelle toilet paper, hemp bast fiber and degummed hemp fiber, this looks angry yet clean. I'll post the 40gr volume 255gr lead cast 45colt and 50cal muzzleloader this weekend. If it beats the raw bast fiber champ I will be stunned!
@ProPyroPowerАй бұрын
that is fast :o
@JaredHempfieldАй бұрын
Just posted the finished product, now its fast
@ProPyroPowerАй бұрын
Clap Clap
@JaredHempfieldАй бұрын
Posting the 7hr ball mill burn test now, its fast af for being fresh out the mill!
@TheRichtaber2 ай бұрын
I have the same rig. I start out with the Fiskars 6 lb. Maul then switch to the x27 as it’s lighter to swing.
@ProPyroPower2 ай бұрын
Thats the candy i want :)
@GarfieldTidball2 ай бұрын
great technique
@JaredHempfield2 ай бұрын
Thanks, I need to make a new video with this pinyon I have. This was when I was camera shy lol
@Chasantnik2 ай бұрын
I like this.
@Austinsairplanes2 ай бұрын
Have you had any issues with primers popping out?
@JaredHempfield2 ай бұрын
Never
@luketimmer61082 ай бұрын
Worst part of shooting AKs is having to look for your brass in the next county over!!
@JaredHempfield2 ай бұрын
Yep and my brass catchers dont fit. My reloads dont eject more than 15ft away but still
@alessandrotozzi92462 ай бұрын
Very good Black Powder! 🤠👍
@JaredHempfield2 ай бұрын
My hemp bast fiber powder is even better! Have some in the ball mill now using degummed hemp fiber charcoal that should be even better
@roberthunter85732 ай бұрын
"Hank didn't do it this way"
@mymainelogcabin2 ай бұрын
👍👍
@tthom_xmr44363 ай бұрын
Where did you purchase yours from?
@josephshea42013 ай бұрын
Great song Statler Brothers
@sarah_farm3 ай бұрын
Your videos are amazing! If you like farming or harvesting videos, I look forward to having you visit my channel to have relaxing moments together!
@ProPyroPower3 ай бұрын
Now thats something i can see myself do every sunday morning, very relaxing with the music
@rpb19613 ай бұрын
How long did you cook it on the grille?
@JaredHempfield3 ай бұрын
about an hour, until it stops smoking
@TwoStageTrigger3 ай бұрын
I find 209s everywhere. And small pistol/rifle. No large rifle or percussion caps.
@Diogenes4253 ай бұрын
Dry bamboo charcoal BP ain’t bad either.
@nunorodrigues3203 ай бұрын
Wow, that looks really clean after burning. Did you try it in a gun? Does it reduce fouling? Is it powerful?
@JaredHempfield3 ай бұрын
I tried in my 42in 50cal muzzleloader and its powerful and somewhat dirty, loaded up and shot 50 45colt 255gr lead casts with 40gr volume and it's faster than Willow or bamboo charcoal. Trying just hemp charcoal next
@davidarmstrong23313 ай бұрын
Hi I purchased one of these maybe 6 months ago,Because in the uk I couldn’t get any top hat primers or number 10 and 11 primers it’s like looking for hens teeth,So found mag spark in USA £70 some pounds with 2 extra top caps it’s easy to miss place them worked great with shotgun primers no miss fires but you do need to clean after several or so shots and they can sometimes get a bit stuck but I primer hole a fraction larger problem solved great bit of kit 👍👍
@ammantophori3 ай бұрын
👍🇺🇸🤠
@dudeman_19704 ай бұрын
Wow good video I had no idea you could make your own black powder and especially from toilet paper thank you for the education.
@JaredHempfield4 ай бұрын
It's really easy to make, this is only my 4th batch. Next I'm using hemp bast fiber charcoal. Should perform very well. Check out Everything Black Powder's channel, he knows way more about this stuff
@ProPyroPower4 ай бұрын
cool vid, i wonder if there is a difference between napkin charcoal and toilet paper charcoal
@JaredHempfield4 ай бұрын
Probably, trying hemp bast fiber charcoal next.
@ProPyroPower4 ай бұрын
@@JaredHempfieldim subbing for that
@anonymousf4544 ай бұрын
Sweet....does this improve performance as well as ignition? Why would I want one?
@JaredHempfield4 ай бұрын
I couldnt find #11 caps until recently but its great if youre hunting, its water resistant and wont fall off like a cap, bigger flash as well but I've since put the old nipple back on.
@anonymousf4544 ай бұрын
@@JaredHempfield On my Rem 1851, I squeeze the cap to deform it just a little bit before I push it on the nipple. This makes it grasp and does not back off. Could you do that with the rifle primers?
Пікірлер
Looks easy enough.but wait. Does it turn the right color sitting in the water pan-i wait for the straw color and then a tiny bit more to get the neck and dump into a pan. Using the cordless drill and socket approach.
Awesome educational video was very helpful. Thank you.
It's actually supposed to be 3 gallons of water to 2.5 pounds of gelatin, not sure why I thought the last time I did it was 2.5 gallons
Where did you get that coffee grinder?
Amazon
I have about 300 pieces of this crap from like 9 years ago now. It came from Field&Stream before they went outta business. Broke 2 of my Dillon pins on it
Seriously been thinking about BP since I watched everything black powder’s video. Very appealing to be able to make you own powder and if you get a flint lock no more primers. In today’s market that’s a HUGE SAVINGS
Bro KZread will mot let me subscribe to your channel. This is some BS
Was looking at this mold and his 7.62x39. It says 2 to 3 weeks if I order should I just expect 2 to 3 months????
Expect 2 months, tested these 77(75gr) sunday at 100yds with 20gr of Benchmark, theyre pretty accurate but it was way too windy to tell
Wish Elvis would drop a new vid can’t blame him for not though.
Awesome!!
So in order to use these you need unscrew the little silver anvil doohickey, break your fingernails under the spent 209 primer attempting to dislodge it, and repeat? So plan on adding more time to your loading procedure and of course that little silver anvil doohickey is begging to be dropped in the dirt at your feet. I think I’ll stick with #11s. When you find them lay up a lifetime’s worth. Plan, plan, plan.
I only used this for a short period when I couldn't find caps whatsoever. I have since made my own swaging spent large rifle cups or from aluminum cans. i'm not paying $30 for 100 caps when I can make them for a few cents a piece. this has its disadvantages but also would be great if you don't want a cap falling off while hunting, much higher ignition rate as well
Ola , estou aprendendo bastante com os vídeos que vejo no KZread Os seus são muito instrutivos Uma pergunta , após refunar o composto ,o senhor os granula novamente ?
Good idea. Thanks
Do you powder coat those? How much velocity are you pushing them to? How is the accuracy?
I will be coating like always, using Benchmark maybe 21gr, will see on the accuracy. Ive been pushing the 55gr too hot getting flyers. Hoping these heavy handers will achieve tighter groups but its going to take some time. I was really just using the 55gr casts even 4gr over max data to fuck around mag dumping. I want to see how these do
Nice! Yup. I use a leather mallet. Works well for the sprue plate.
I use a billy club, works great
What ever happened to Elvis Ammo on KZread ?
I saw him on a live chat once a few months back. He still loads. Got tired of the YT gestapo deleting his vids. He took his ball and left for the hills. Hello uuutttuuubbbeee! Elvis ammo here!
Curious how long you cook the tp in the can for, until it stops shooting flames out? Or a certain amount of time. I've been trying this strategy by throwing paint cans in fire but it's just destroying my cans I want to use the propane stove instead but I'm just not sure how long to cook it
A rolling fire is too hot, embers is all you need. I cook until the smoke stops, about an hour or more on the propane grill, I remove the grate, flame shield and set can right on the burner on high. Not allowing flame to ignite the gasifying. Hemp bast fiber is my best charcoal so far, faster than toilet paper. Even hemp hurds was faster.
@@JaredHempfield I tried it in my stove last night, seems like it's overchared and maybe even burnt a bit inside. Going to re try with my propane like you did.
@@MegaMarclar By burnt you mean turned to ash? Sounds like it back drafted some. Plug the hole as soon as it stops smoking to prevent that. Ive taken off every 15 minutes and given a good shake to loosen it all up for an even pyrolyze. Good luck
@@MegaMarclar I'll be making more bast fiber char tomorrow, will post a video
You got way to much fun with all that candy lol ;p
Guess ill be the first comment, and ill use this comment to say it first. NICE BALLS SIR!😅
Thanks 😁 Now all I need is the cannon. One made a nice lifter weight knob for the 20lb Lee pot, not dripping anynore
7 week wait wow that's sucks
Where did you get the brass knob?
I casted it from brass using a billiard ball in a sand mold
@@JaredHempfield What a great idea, solves the drip problem?
@@SilverSniffer For sure, eliminated!
Beautiful ammo 😮 Salute Eb South africa 🇿🇦 ❤️
Thanks, they came out to nearly 2500fps
Awesome! very curious indeed
Thats incredibly fast, stuff pops like Flash 🎉🎉
Open air tests aint the best to tell but judging from the willow, bamboo, cottonelle toilet paper, hemp bast fiber and degummed hemp fiber, this looks angry yet clean. I'll post the 40gr volume 255gr lead cast 45colt and 50cal muzzleloader this weekend. If it beats the raw bast fiber champ I will be stunned!
that is fast :o
Just posted the finished product, now its fast
Clap Clap
Posting the 7hr ball mill burn test now, its fast af for being fresh out the mill!
I have the same rig. I start out with the Fiskars 6 lb. Maul then switch to the x27 as it’s lighter to swing.
Thats the candy i want :)
great technique
Thanks, I need to make a new video with this pinyon I have. This was when I was camera shy lol
I like this.
Have you had any issues with primers popping out?
Never
Worst part of shooting AKs is having to look for your brass in the next county over!!
Yep and my brass catchers dont fit. My reloads dont eject more than 15ft away but still
Very good Black Powder! 🤠👍
My hemp bast fiber powder is even better! Have some in the ball mill now using degummed hemp fiber charcoal that should be even better
"Hank didn't do it this way"
👍👍
Where did you purchase yours from?
Great song Statler Brothers
Your videos are amazing! If you like farming or harvesting videos, I look forward to having you visit my channel to have relaxing moments together!
Now thats something i can see myself do every sunday morning, very relaxing with the music
How long did you cook it on the grille?
about an hour, until it stops smoking
I find 209s everywhere. And small pistol/rifle. No large rifle or percussion caps.
Dry bamboo charcoal BP ain’t bad either.
Wow, that looks really clean after burning. Did you try it in a gun? Does it reduce fouling? Is it powerful?
I tried in my 42in 50cal muzzleloader and its powerful and somewhat dirty, loaded up and shot 50 45colt 255gr lead casts with 40gr volume and it's faster than Willow or bamboo charcoal. Trying just hemp charcoal next
Hi I purchased one of these maybe 6 months ago,Because in the uk I couldn’t get any top hat primers or number 10 and 11 primers it’s like looking for hens teeth,So found mag spark in USA £70 some pounds with 2 extra top caps it’s easy to miss place them worked great with shotgun primers no miss fires but you do need to clean after several or so shots and they can sometimes get a bit stuck but I primer hole a fraction larger problem solved great bit of kit 👍👍
👍🇺🇸🤠
Wow good video I had no idea you could make your own black powder and especially from toilet paper thank you for the education.
It's really easy to make, this is only my 4th batch. Next I'm using hemp bast fiber charcoal. Should perform very well. Check out Everything Black Powder's channel, he knows way more about this stuff
cool vid, i wonder if there is a difference between napkin charcoal and toilet paper charcoal
Probably, trying hemp bast fiber charcoal next.
@@JaredHempfieldim subbing for that
Sweet....does this improve performance as well as ignition? Why would I want one?
I couldnt find #11 caps until recently but its great if youre hunting, its water resistant and wont fall off like a cap, bigger flash as well but I've since put the old nipple back on.
@@JaredHempfield On my Rem 1851, I squeeze the cap to deform it just a little bit before I push it on the nipple. This makes it grasp and does not back off. Could you do that with the rifle primers?
Love this