I missed ya. Guy had written on his tailgate at the Plainfield Walmart "My X Wife misses me... but she's getting to be a better shot."
@bowhuntermatt2423 күн бұрын
I have a 24 sg with tab zombie slip ons would going to true duel make it louder?
@duff840223 күн бұрын
Haven't ever heard your exhaust, couldn't tell you for sure.
@kaylennnnnn31792 ай бұрын
Janets BBQ in Boswell ok, is the go to!! 😊
@duff84022 ай бұрын
Thank you! Will have to buzz back down there to try that one out sometime soon.
@GerhardReinig2 ай бұрын
PLEASE! Same programs on the newest generation of FANUC robots including flips!!!
@Nolan-N4NJM2 ай бұрын
Great video! I have the same radio, and I’ve noticed if you use low power on the frequency that your cross banding to the radio runs much cooler
@davidjoaquin1412 ай бұрын
Thanks James, I think I can change them out no problem after watching this. You the Man!!
@duff84022 ай бұрын
Hope it works out well for ya 🤘. As others have said, you can do it without taking the calipers off, but I like to clean the brake dust off the pistons.
@bc659252 ай бұрын
And there's a loose nut on the handle bars.
@duff84022 ай бұрын
Well, that goes without saying
@kennethcalimpong79192 ай бұрын
Hi James C, another great ride in your beautiful State, loved the story of your tour pack challenge riding to Indiana. Glad it didn’t fly open. As far as your Ciro3D big ass cup holder, there’s one on ETSY, if you search for Harley Davidson cup holder, there’s a seller from Florida that custom fabs one using the left side lower panel, but you would have to get it color matched, it only comes in Vivid black, kinda pricey but looks really custom. Have a great work week, I took my RoadGlide out on a long ride, both Saturday & Sunday got rained on hard..😂..but hit traction control and still enjoyed the ride, Ride hard💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
@duff84022 ай бұрын
Hadn't ever seen that cup holder before. Looks pretty awesome but definitely a little rich for a place to keep the coffee 😆 When ya live in a place where you're more surprises when it's a full day of no rain, I reckon it's pretty normal to ride in the rain, eh? I try to avoid it, even in a rain suit it's just not fun for me lol
@kennethcalimpong79193 ай бұрын
Hi James C, great video, my commute is the same, pitch black, consistently only see 2-3 motorcycles, I do tandem lane share to keep both of us riders a little more visible to cars,unless their doing 80mph😂in which I get left in the dust. They daily ride to work & back always gets me focused & prepared for a productive day at work and my tasks at home. Ride Hard💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
@duff84023 ай бұрын
Bring able to ride to work certainly makes the day less mundane. 🤘
@pohatuxl3 ай бұрын
Man I hope this helps! Gonna try it out tmrw but took my bike to 3 events all of which I’d come back and pc6 gives me back a 0 table. No autotune adjustment made. Not even tech support mentioned about copying my downloaded map onto the pc6 table. Thanks for the video!
@duff84023 ай бұрын
Come back if it doesn't get ya lined out and I'll see what I can do to help
@yoursofullofitha72622 ай бұрын
That software can be tricky, bet your bike runs better though after you got it lined out.
@bc659253 ай бұрын
Way back, when I was still at Clinton, someone put a new in box Craftsman opener on Lilly Bay for $50 and I bought it because. Just so happens it's the same opener in this house and I've taken parts off of it to fix this one. Then I'll order that part and keep it good. I REALLY like that opener in the barn that hooks right onto the tension spring bar that I have in the barn. It's just so smooth and is not hanging out in the way but just now after a quick look I see it's about $580.
@duff84023 ай бұрын
This one's a craftsman also. Best I can tell, they all use this exact same worm gear, drive shaft and sprocket. Craftsman, liftmaster and chamberlain at least.
@kennethcalimpong79193 ай бұрын
Hi James C, watched your videos backwards 😂, just watched your most current video “new gloves” and saw that I missed this one😂lights green Dumbass, we so ride our Harley’s the same💪🏼car drivers can be so non-focused 😒, Aloha my Harley brother, 🤙🏽Kenneth
@kennethcalimpong79193 ай бұрын
Hi James C😂you got new gloves 💪🏼RevZilla is great and can be addictive..with the Zilla cash. Camera looks great! The weather in Oklahoma looks amazing. Always great seeing you on the Tube. Ride hard 💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
@duff84023 ай бұрын
Finally got new gloves! I realized when I went and found the link to the gloves to share in the description that Revzilla has a military discount. Could've saved myself some money and didn't even realize it. Thanks for commenting as always, Kenneth 🍻
@PhilipRaines3 ай бұрын
I have a hero 2 that i bought new. It needed cleaning up like yours did. It also still works great! Yes, it has a removable battery. But unless you have a separate charger there is no point.
@duff84023 ай бұрын
Yeah same as my 3, I had 3 batteries and a separate charger for them but I always left it plugged in on the handlebars, so there's really no point for the battery at all, other than keeping time. This will do just fine 🤘🍻
@netzombiee6463 ай бұрын
What antenna are you using on the FT5DR ?
@duff84023 ай бұрын
I've tried several. The one I use most is the Diamond RH701. I've got a Nagoya NG771, NG701, Signal Stick. The Diamond though short seems to work the best of those. Eventually, I'm going to mount a more permanent antenna on the bike for hopefully some better results.
@bc659253 ай бұрын
Wha wha wha, I have to go to work a couple of days a month.
@kennethcalimpong79193 ай бұрын
Hi James C, you made that Thai food even spicier🔥love the food footage, hope you find some new gloves soon😂, just gotta say, always crack up, when you say “Jack Ass”, it is my favorite and only curse word, I use😂, Ride Hard💪🏼, Be Blessed 🙏🏽, Aloha🤙🏽Kenneth
@duff84023 ай бұрын
Mentioned the jackass driver and somehow managed to clip out the part of the footage that had him in it. I'll be a good content editor one of these days 😂
@viktorask3 ай бұрын
Thank you. Why not to stay then with PC5 🙄
@duff84023 ай бұрын
The PC5 has been stripped from the market. Can only find them second hand now for two or three times what they are worth. I found out later on, it's because they've limited the adjustments on the PC6 to 15% fuel changes unless you're a certified tuner. My best advice from here is to stay away from Dynojet. They have turned to complient shit
@brandonreed40114 күн бұрын
Problem is PC6 is the only tuner you can get in some states... And to be completely honest, I actually had to go out of state to get it. Screaming eagle doesn't work on 2024 Harley's with CA VIN #, only other option for a tune I could find was PC6.
@WRJK9883 ай бұрын
That cars antenna setup was insane! Lol
@duff84023 ай бұрын
Yeah, I wish now I'd have continued up to Mt Scott to meet him and see his setup! Thanks for subscribing 🤘
@timdurpos32983 ай бұрын
I have a set like that I prefer my stock bars and my mini apes on my nightster
@bc659253 ай бұрын
Need me to tack weld those in place?
@duff84023 ай бұрын
Pretty sure the riser is aluminum and the bars steel. The dealership told me some guys "pin" them, but they wouldn't tell me how they go about that.
@kennethcalimpong79193 ай бұрын
Hi James C, another great video, short but sweet, you got a great singing voice👌loved the Celine Dion. Cool to see you wrenching on your Shark, I adjusted my bars about 8 months ago they are perfect distance, ride hard💪🏼, be Blessed 🙏🏽, Aloha, Kenneth 🤙🏽
@duff84023 ай бұрын
Well I was shootin for Eric Carmen, I'll work on that 😂
@Vadym6183 ай бұрын
Does 980p has a superheterodyne receivers?
@duff84023 ай бұрын
Yes it does
@bderryberry49873 ай бұрын
Super well done comparison. Rinehart DBX40 for me.
@duff84023 ай бұрын
Still lovin them a year later 🤘
@kennethcalimpong79193 ай бұрын
Hi James C❤, thank you for the shot out, you always make me chuckle on your journey, especially the dump truck with the infinite turn signal and the trailer without lighting, why do so much drivers not respect the privilege of operating vehicles? Nooice 400 miles, always a great break from my reality, riding with you in Beautiful Oklahoma, ride Hard 💪🏼, Be Blessed 🙏🏽Aloha, Kenneth 🤙🏽
@duff84023 ай бұрын
I'm going to run out of ideas for hole in the wall restaurants to check out if I keep this up. May have to start taking viewer suggestions, since you aboht my only viewer, better get your searching skills ready for that day 😂
@garyholloway4353 ай бұрын
I really enjoy your videos! Like the tunes you add! I was glad to join you and Dywaine on this ride, and hope to ride with y'all on some future trips. Keep the awesome videos rollin'.
@duff84023 ай бұрын
Will make sure you're in the loop! Thanks for ridin along!
@bc659253 ай бұрын
Well, since you are my FAVORITE tuber I have to comment. And it was the first year we went, which ever one that was.
@Centralthabiker3 ай бұрын
bike looks amazing I wonder if that would work with a bike that has the cvo type chin spoiler
@duff84023 ай бұрын
According to the Sik Baggers KZread channel, no it will not
@Centralthabiker3 ай бұрын
@@duff8402 dangit I was afraid of that but thank you
@kennethcalimpong79193 ай бұрын
Hi James C, your bars look like 18’s, you were zipping on the freeway, the Glide looking Meaner with the kit, till the next video, Ride Hard💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
@duff84023 ай бұрын
Supposedly they're 16s,they were on the bike when I bought it so I'm not 100% positive. I do like the height, but I don't like whatever brand they are. The powder coat on them is terrible and the riser clamps are only half clamps so the bars slip over time. I have to loosen them and rock them forward about three times a year. Thanks for watching Kenneth 🤙
@bc659253 ай бұрын
Thanks for letting this boring old man go along.
@duff84023 ай бұрын
Well, I don't think you're a boring old man!
@kennethcalimpong79194 ай бұрын
Hi James C, anytime you saddled up on the Road Glide, it is never boring, love the throttle roll in the tunnel, was hoping for an encore on the 2nd tunnel but was content with the 1st tunnel. Not food images from Arnold’s Old Fashioned Burger.😢Thanks for the ride though Tulsa💪🏼Till the next video, Ride Hard, Be Blessed 🙏🏽, Aloha, Kenneth 🤙🏽
@duff84024 ай бұрын
And what's worse, I even took a nice panning video of my food and the inside of the restaurant and I didn't even realize I forgot to include it. MAJOR failure. What's funny, later on in the day I went through the tunnels again and there was street glide behind me this time. I thought for sure he would rev up in the tunnels, in which case I was going to help him. BUT HE NEVER DID!!!! I was so disappointed
@kennethcalimpong79194 ай бұрын
Hi James C, another fun ride, with you, in your beautiful state of Oklahoma. Your lunch images made me hungry 😂, love the day to night switch on the video, got a laugh when you mentioned, the food put you in a sleepy state and you jumped on the interstate, Ride hard my Harley Davidson brother 💪🏼, be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
@duff84024 ай бұрын
Thanks for watching, Kenneth! The part of this video where I had the music playing is one of my favorite little scenic rides close to my home. Very short, but nice and twisty. Good weather this weekend coming up, found another restaurant in Southern Oklahoma I'm going to have to check out. Lots of real pretty riding down that way 🤙
@bc659254 ай бұрын
Guess I'm going to have to visit the Guthrie Scottish Rite sometime.
@bc659254 ай бұрын
No tattoos, no fireworks, no piercings, no gambling, I sure have misled you as a child.
@bc659254 ай бұрын
"It's what I eat here, if I want something different I'll go to a different place."
@habovh4 ай бұрын
Cool video! I know it's been a while since you recorded this, but if you're still using the FT5 you might want to try the "Bluetooth battery save function" (item 4 of the OPTION menu) for the carrier signal issue you're describing. It seems the feature is missing from the FT5 user manual, but is explained in the FT3 manual, and it looks like it's actually implemented in the FT5 as well. If you ended up getting a PTT button, I believe it would remove the carrier noise, may improve the audio quality and the overall experience. Note this would disable VOX. I do not own any Yaesu handheld so I can't test any of this for sure though.
@duff84024 ай бұрын
I will absolutely check this out when I get. Home from work today. Thanks for the heads up 🍻
@duff84024 ай бұрын
Looks like there are two options on item 4, "Auto" and "FIX". Mine was on Auto. Don't see anything for battery save function.
@habovh4 ай бұрын
@@duff8402 you're right, after watching a couple more videos on the FT5 it seems the feature is actually missing from this model and is only available on the FT3. Sorry about that. You can see the menu I was referring to here: kzread.info/dash/bejne/f3uat85saZOegpM.htmlsi=xuFNRIcnBYEuZmYR&t=125
@bc659254 ай бұрын
Don't know about the bunghole, but you want to watch out for your cornhole bud.
@radiorework26244 ай бұрын
Hopefully it’s not super hard. Also Yaesu still might have parts for this radio so if you need one definitely try calling if you need some.
@kennethcalimpong79194 ай бұрын
Hi James C, Sir the roads in your beautiful state looks very good, I wish our roads were maintained, first thing I upgraded on my 20 RoadGlide was suspension, some potholes here can swallow a Kia 😮. Loved the part, when shared about the Ready mix plant, white wall tires look good on some Harley’s😂, thanks for the ride, Be Blessed 🙏🏽& Aloha🤙🏽Kenneth
@duff84024 ай бұрын
They're not always that great around here either. I've just been pretty lucky in most of the video's I've made to find the better ones! I hit a hole in one of the interstates on my way to work one morning that dented my front wheel so bad it wouldn't hold air anymore. That ended up being about a 2000 dollar mistake, I talk more about it in my video "Dented Wheels and Wind Noise. Take care and ride safe, sir!
@kennethcalimpong79194 ай бұрын
Hi James C, Nooice long ride, beautiful scenery, Road Glide sounds & looks great, certain times it looks orange, but your Glide is Red right? I saddle a 2020 Road Glide in scorching orange. Look forward to your next video, lunch looked great, Ride Hard, Be Blessed🙏🏽, Aloha, Kenneth 🤙🏽
@duff84024 ай бұрын
It's a matte red. Harley calls it Wicked Red Denim. I was not shopping for a new bike when I saw it at the dealership, but the color alone sucked me in! I'll throw some pictures of it up on my Instagram story @aforgewithnoname if you want to have a closer look. 🍻 Cheers and thanks for watchin!
@bc659254 ай бұрын
I think Oakwood is bigger than Grange Corner.
@duff84024 ай бұрын
Ya may have got me there. I can't find a population of grange corner. Oakwood says 65
@bc659254 ай бұрын
"My dad says butane's the bastard gas."
@bc659254 ай бұрын
Small whisky? Micro Whiskey.
@duff84024 ай бұрын
And that's exactly why I put a distinct pause between Mike and Rowe 😂
@paulcarcamo69924 ай бұрын
Thank you for the video. Excellent work. Thank you for your time doing it.
@akilan23844 ай бұрын
Number 400, All the best with the channel. Good job.
@duff84024 ай бұрын
Haha! Only took me 14 years to get 400! I'll be a superstar in no time 😂
@user-kn6hd9cy8y4 ай бұрын
You gotta do what you gotta do… keep digging… 😎
@bc659255 ай бұрын
Looked like fun. East is least and west is best.
@bc659255 ай бұрын
Yes, but how about the traffic? I can't remember what brand of glove that was I bought at that place on the south side that we went to once but they lasted real good. They were holeless when I sold the bike.
@freebehindbars86545 ай бұрын
Remove the cat, get a tune. It will sound better and run a lot cooler.
Пікірлер
I missed ya. Guy had written on his tailgate at the Plainfield Walmart "My X Wife misses me... but she's getting to be a better shot."
I have a 24 sg with tab zombie slip ons would going to true duel make it louder?
Haven't ever heard your exhaust, couldn't tell you for sure.
Janets BBQ in Boswell ok, is the go to!! 😊
Thank you! Will have to buzz back down there to try that one out sometime soon.
PLEASE! Same programs on the newest generation of FANUC robots including flips!!!
Great video! I have the same radio, and I’ve noticed if you use low power on the frequency that your cross banding to the radio runs much cooler
Thanks James, I think I can change them out no problem after watching this. You the Man!!
Hope it works out well for ya 🤘. As others have said, you can do it without taking the calipers off, but I like to clean the brake dust off the pistons.
And there's a loose nut on the handle bars.
Well, that goes without saying
Hi James C, another great ride in your beautiful State, loved the story of your tour pack challenge riding to Indiana. Glad it didn’t fly open. As far as your Ciro3D big ass cup holder, there’s one on ETSY, if you search for Harley Davidson cup holder, there’s a seller from Florida that custom fabs one using the left side lower panel, but you would have to get it color matched, it only comes in Vivid black, kinda pricey but looks really custom. Have a great work week, I took my RoadGlide out on a long ride, both Saturday & Sunday got rained on hard..😂..but hit traction control and still enjoyed the ride, Ride hard💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
Hadn't ever seen that cup holder before. Looks pretty awesome but definitely a little rich for a place to keep the coffee 😆 When ya live in a place where you're more surprises when it's a full day of no rain, I reckon it's pretty normal to ride in the rain, eh? I try to avoid it, even in a rain suit it's just not fun for me lol
Hi James C, great video, my commute is the same, pitch black, consistently only see 2-3 motorcycles, I do tandem lane share to keep both of us riders a little more visible to cars,unless their doing 80mph😂in which I get left in the dust. They daily ride to work & back always gets me focused & prepared for a productive day at work and my tasks at home. Ride Hard💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
Bring able to ride to work certainly makes the day less mundane. 🤘
Man I hope this helps! Gonna try it out tmrw but took my bike to 3 events all of which I’d come back and pc6 gives me back a 0 table. No autotune adjustment made. Not even tech support mentioned about copying my downloaded map onto the pc6 table. Thanks for the video!
Come back if it doesn't get ya lined out and I'll see what I can do to help
That software can be tricky, bet your bike runs better though after you got it lined out.
Way back, when I was still at Clinton, someone put a new in box Craftsman opener on Lilly Bay for $50 and I bought it because. Just so happens it's the same opener in this house and I've taken parts off of it to fix this one. Then I'll order that part and keep it good. I REALLY like that opener in the barn that hooks right onto the tension spring bar that I have in the barn. It's just so smooth and is not hanging out in the way but just now after a quick look I see it's about $580.
This one's a craftsman also. Best I can tell, they all use this exact same worm gear, drive shaft and sprocket. Craftsman, liftmaster and chamberlain at least.
Hi James C, watched your videos backwards 😂, just watched your most current video “new gloves” and saw that I missed this one😂lights green Dumbass, we so ride our Harley’s the same💪🏼car drivers can be so non-focused 😒, Aloha my Harley brother, 🤙🏽Kenneth
Hi James C😂you got new gloves 💪🏼RevZilla is great and can be addictive..with the Zilla cash. Camera looks great! The weather in Oklahoma looks amazing. Always great seeing you on the Tube. Ride hard 💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
Finally got new gloves! I realized when I went and found the link to the gloves to share in the description that Revzilla has a military discount. Could've saved myself some money and didn't even realize it. Thanks for commenting as always, Kenneth 🍻
I have a hero 2 that i bought new. It needed cleaning up like yours did. It also still works great! Yes, it has a removable battery. But unless you have a separate charger there is no point.
Yeah same as my 3, I had 3 batteries and a separate charger for them but I always left it plugged in on the handlebars, so there's really no point for the battery at all, other than keeping time. This will do just fine 🤘🍻
What antenna are you using on the FT5DR ?
I've tried several. The one I use most is the Diamond RH701. I've got a Nagoya NG771, NG701, Signal Stick. The Diamond though short seems to work the best of those. Eventually, I'm going to mount a more permanent antenna on the bike for hopefully some better results.
Wha wha wha, I have to go to work a couple of days a month.
Hi James C, you made that Thai food even spicier🔥love the food footage, hope you find some new gloves soon😂, just gotta say, always crack up, when you say “Jack Ass”, it is my favorite and only curse word, I use😂, Ride Hard💪🏼, Be Blessed 🙏🏽, Aloha🤙🏽Kenneth
Mentioned the jackass driver and somehow managed to clip out the part of the footage that had him in it. I'll be a good content editor one of these days 😂
Thank you. Why not to stay then with PC5 🙄
The PC5 has been stripped from the market. Can only find them second hand now for two or three times what they are worth. I found out later on, it's because they've limited the adjustments on the PC6 to 15% fuel changes unless you're a certified tuner. My best advice from here is to stay away from Dynojet. They have turned to complient shit
Problem is PC6 is the only tuner you can get in some states... And to be completely honest, I actually had to go out of state to get it. Screaming eagle doesn't work on 2024 Harley's with CA VIN #, only other option for a tune I could find was PC6.
That cars antenna setup was insane! Lol
Yeah, I wish now I'd have continued up to Mt Scott to meet him and see his setup! Thanks for subscribing 🤘
I have a set like that I prefer my stock bars and my mini apes on my nightster
Need me to tack weld those in place?
Pretty sure the riser is aluminum and the bars steel. The dealership told me some guys "pin" them, but they wouldn't tell me how they go about that.
Hi James C, another great video, short but sweet, you got a great singing voice👌loved the Celine Dion. Cool to see you wrenching on your Shark, I adjusted my bars about 8 months ago they are perfect distance, ride hard💪🏼, be Blessed 🙏🏽, Aloha, Kenneth 🤙🏽
Well I was shootin for Eric Carmen, I'll work on that 😂
Does 980p has a superheterodyne receivers?
Yes it does
Super well done comparison. Rinehart DBX40 for me.
Still lovin them a year later 🤘
Hi James C❤, thank you for the shot out, you always make me chuckle on your journey, especially the dump truck with the infinite turn signal and the trailer without lighting, why do so much drivers not respect the privilege of operating vehicles? Nooice 400 miles, always a great break from my reality, riding with you in Beautiful Oklahoma, ride Hard 💪🏼, Be Blessed 🙏🏽Aloha, Kenneth 🤙🏽
I'm going to run out of ideas for hole in the wall restaurants to check out if I keep this up. May have to start taking viewer suggestions, since you aboht my only viewer, better get your searching skills ready for that day 😂
I really enjoy your videos! Like the tunes you add! I was glad to join you and Dywaine on this ride, and hope to ride with y'all on some future trips. Keep the awesome videos rollin'.
Will make sure you're in the loop! Thanks for ridin along!
Well, since you are my FAVORITE tuber I have to comment. And it was the first year we went, which ever one that was.
bike looks amazing I wonder if that would work with a bike that has the cvo type chin spoiler
According to the Sik Baggers KZread channel, no it will not
@@duff8402 dangit I was afraid of that but thank you
Hi James C, your bars look like 18’s, you were zipping on the freeway, the Glide looking Meaner with the kit, till the next video, Ride Hard💪🏼, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
Supposedly they're 16s,they were on the bike when I bought it so I'm not 100% positive. I do like the height, but I don't like whatever brand they are. The powder coat on them is terrible and the riser clamps are only half clamps so the bars slip over time. I have to loosen them and rock them forward about three times a year. Thanks for watching Kenneth 🤙
Thanks for letting this boring old man go along.
Well, I don't think you're a boring old man!
Hi James C, anytime you saddled up on the Road Glide, it is never boring, love the throttle roll in the tunnel, was hoping for an encore on the 2nd tunnel but was content with the 1st tunnel. Not food images from Arnold’s Old Fashioned Burger.😢Thanks for the ride though Tulsa💪🏼Till the next video, Ride Hard, Be Blessed 🙏🏽, Aloha, Kenneth 🤙🏽
And what's worse, I even took a nice panning video of my food and the inside of the restaurant and I didn't even realize I forgot to include it. MAJOR failure. What's funny, later on in the day I went through the tunnels again and there was street glide behind me this time. I thought for sure he would rev up in the tunnels, in which case I was going to help him. BUT HE NEVER DID!!!! I was so disappointed
Hi James C, another fun ride, with you, in your beautiful state of Oklahoma. Your lunch images made me hungry 😂, love the day to night switch on the video, got a laugh when you mentioned, the food put you in a sleepy state and you jumped on the interstate, Ride hard my Harley Davidson brother 💪🏼, be Blessed 🙏🏽, Aloha Kenneth 🤙🏽
Thanks for watching, Kenneth! The part of this video where I had the music playing is one of my favorite little scenic rides close to my home. Very short, but nice and twisty. Good weather this weekend coming up, found another restaurant in Southern Oklahoma I'm going to have to check out. Lots of real pretty riding down that way 🤙
Guess I'm going to have to visit the Guthrie Scottish Rite sometime.
No tattoos, no fireworks, no piercings, no gambling, I sure have misled you as a child.
"It's what I eat here, if I want something different I'll go to a different place."
Cool video! I know it's been a while since you recorded this, but if you're still using the FT5 you might want to try the "Bluetooth battery save function" (item 4 of the OPTION menu) for the carrier signal issue you're describing. It seems the feature is missing from the FT5 user manual, but is explained in the FT3 manual, and it looks like it's actually implemented in the FT5 as well. If you ended up getting a PTT button, I believe it would remove the carrier noise, may improve the audio quality and the overall experience. Note this would disable VOX. I do not own any Yaesu handheld so I can't test any of this for sure though.
I will absolutely check this out when I get. Home from work today. Thanks for the heads up 🍻
Looks like there are two options on item 4, "Auto" and "FIX". Mine was on Auto. Don't see anything for battery save function.
@@duff8402 you're right, after watching a couple more videos on the FT5 it seems the feature is actually missing from this model and is only available on the FT3. Sorry about that. You can see the menu I was referring to here: kzread.info/dash/bejne/f3uat85saZOegpM.htmlsi=xuFNRIcnBYEuZmYR&t=125
Don't know about the bunghole, but you want to watch out for your cornhole bud.
Hopefully it’s not super hard. Also Yaesu still might have parts for this radio so if you need one definitely try calling if you need some.
Hi James C, Sir the roads in your beautiful state looks very good, I wish our roads were maintained, first thing I upgraded on my 20 RoadGlide was suspension, some potholes here can swallow a Kia 😮. Loved the part, when shared about the Ready mix plant, white wall tires look good on some Harley’s😂, thanks for the ride, Be Blessed 🙏🏽& Aloha🤙🏽Kenneth
They're not always that great around here either. I've just been pretty lucky in most of the video's I've made to find the better ones! I hit a hole in one of the interstates on my way to work one morning that dented my front wheel so bad it wouldn't hold air anymore. That ended up being about a 2000 dollar mistake, I talk more about it in my video "Dented Wheels and Wind Noise. Take care and ride safe, sir!
Hi James C, Nooice long ride, beautiful scenery, Road Glide sounds & looks great, certain times it looks orange, but your Glide is Red right? I saddle a 2020 Road Glide in scorching orange. Look forward to your next video, lunch looked great, Ride Hard, Be Blessed🙏🏽, Aloha, Kenneth 🤙🏽
It's a matte red. Harley calls it Wicked Red Denim. I was not shopping for a new bike when I saw it at the dealership, but the color alone sucked me in! I'll throw some pictures of it up on my Instagram story @aforgewithnoname if you want to have a closer look. 🍻 Cheers and thanks for watchin!
I think Oakwood is bigger than Grange Corner.
Ya may have got me there. I can't find a population of grange corner. Oakwood says 65
"My dad says butane's the bastard gas."
Small whisky? Micro Whiskey.
And that's exactly why I put a distinct pause between Mike and Rowe 😂
Thank you for the video. Excellent work. Thank you for your time doing it.
Number 400, All the best with the channel. Good job.
Haha! Only took me 14 years to get 400! I'll be a superstar in no time 😂
You gotta do what you gotta do… keep digging… 😎
Looked like fun. East is least and west is best.
Yes, but how about the traffic? I can't remember what brand of glove that was I bought at that place on the south side that we went to once but they lasted real good. They were holeless when I sold the bike.
Remove the cat, get a tune. It will sound better and run a lot cooler.
kzread.info/dash/bejne/jKFlysSPpLiyoLw.htmlsi=frSOvSWncS5UY6aF
Still waiting on a good 70 degree day for a tune, but we'll get'r done in the next month or so