This is mostly about do-it-yourself and how to projects from a verity of areas, As well as some fun videos too. I cover a wide variety of topics and like to help show people some tips to save money by doing things themselves. I try to post every week sometimes more. so please like and subscribe to my channel. And if you have a question please ask I do my best to respond to everyone that comments as my channel is not to big yet.
Пікірлер
Longer cables a plus Charged my 5000 for 24hrs after unboxing. 8mos later lights indicate "full charge" 👍 Will it through cables when hooked to batt with vehicle running. Sakes man said it would, haven't hae much time to test theory Good vid Stay warm up there Dano
Bud you learned that in driver’s ed
LOL, not everyone, because people still do it. Thanks for commenting
Bro, clean your car.
@shanesmaineshop 1 year ago A tree fell on this car and smashed out the windshield so it has a lot of water damage on the interior. It is being disassembled and going to the junkyard. Thanks for commenting
Thank you
What brand is that grinder or cut off tool that you’re using?
Good question, I just checked and it has no markings at all. It an older one I have had for decades, so I don’t even remember where I got it from. Sorry I can’t help.
Could someone explain me the difference between a live and a hot wire?
Both terms mean there is power running through it.
@@shanesmaineshop oh, ok thanks 👍
Ya can't weld to rust..
Gorilla Power. Sheesh. No wonder us southerners had a hard time trying to get up Little Round Top v. the 20th Maine.
AGm
MaG
Oh my god 20 minutes I spent trying to remove a dam socket from my new wrench
What he wants to tell us is ... there's a sensor in the spare tire. That's it, great help dude
Your welcome
Whos going to clean that suv 😆
Not me, lol
Legend
Thanks
full vid
How about wd40
It works but won’t last as long.
It’s kind of sad. I actually got married there about seven years ago. Awesome place
It is very sad for sure
I can't seem to find this particular spanner on Amazon..
Oh man, you’re racking my brain now I can’t remember where I got that from.
@@shanesmaineshop If you remember, lemme know. It's the best spanner I've seen online and as a video demo. Perfect length and adjustable, and swappable pins...
@@ralphdoid yeah if I remember right, it took me a while to find this one. I will see if I can do some research and I will let you know if I figure it out.
how do you get it to. tilt i can not get mine for the life of me
It should have a pin locking it on the d at side
i tried the lock to unlock and it still wont move does it have to be in gear or something?
@@jimlahee5454 it needs to be in neutral I think. I’ll check mine in the morning to see if I’m forgetting something
If you have the motor position, so you’d be going straight in the water directly below the push button to shut it off is a little thumb lever that is in a slot. It needs to be unlocked for the motor to tip.
This is EXACTLY what I need to fix. Where's the rest of the video this is no help at all
Is this still open?
Yes it is, check out my “fans of cove haven” facebook group, for the latest info from members. Here is a link to it. facebook.com/share/9iJv9kXrmsdxf6kR/?mibextid=WC7FNe
What is the distance between each kartite and each steel tube and its diameter...and do you know a site for that?❤
I can check it on Monday and let you know.
@@shanesmaineshop Fine, thank you ♥️
I just had the same issue on Green Mountain Grill Daniel Boone. I woke up to check on my pork butt and grill was off. I noticed the pellets had funneled in the hopper leaving the edges, but when I looked in the grill the firebox was over loaded with pellets. I will try this and give an update on my next cook.
I hope it works out for you. Thanks for commenting.
I would like to ask if you could help us because the gauge of our water pump is set to turn on at 20 psi and to turn off at 40...but we saw it yesterday and it became 10 to start and then turns off when it goes up until 20...we don't know what happened why the gauge measures changed. Thank you for the help in advance...
Well, it could be several things, the gauge itself could be bad, or they could be debris stuck in the backside of it, which is causing the reading to be incorrect. The only other thing that I can think of is the controller itself that is set to come on at a certain pressure off the appropriate pressure, it’s hard to tell from a distance. I hope this helps.
I commented as my other channel, but as I was saying, it could be debris stuck in the back of the gauge, causing the reading to be incorrect or the gauge itself could be bad other than that the only other thing I can think of is the controller itself? Is your water pressure any different than before? If not, then I’m guessing it could be your gauge, but like I said without actually being there, it’s very hard to tell. I hope this helps.
Thank you so much for your help, we'll try to see and check...thanks again
With Everything positive said below in mind i could just say, - Very well done indeed!. No one else here on You tube managed to make a video that actually showed the "very process" of changing the trimmer line like you did(Somewhat embarrassed really), but after seeing this one i am Proud😇😄. Well done
Thank you so much for the kind words. I’m glad the video was to your liking.
this did not help me I had to push the button then put the socket on
Interesting.
Next will be Cove Haven and then Paradise Stream the new owner don't care about the properties like the original owners did yeah he put a little money into them but you could see the shape of the grounds in the shape of the place they really don't care about them I've been going to all of them since the 1980s I loved Pocono Palace
Let’s hope that don’t happen, I have a new group on Facebook doing our best to help keep the resorts busy. “Fans of Cove Haven” if you want to check it out. You don’t know you have the right group if the front page is a picture of the main building kind of at night with a deer standing in front of it.
Thank you , would’ve thrown a perfectly good Stanley away .
your welcome
Thank you so much. I appreciate you making this vid very much. ❤
Your welcome thank you for taking the time to comment.
Bought it and it squirts outside the zerk but can’t get into zerk
Is the zerk plugged? Have you tried on other ones and still get the same results?
@@shanesmaineshop yes I’ve got 11 new ones installed only able to fill one up. The other just don’t want to take grease, it just comes out the side around the zerk
@@toolwithintention That sucks, something certainly is not right
Thank you
You’re very welcome
you talk too much just show us
You’re not letting me SEE THE TAB
This is just a short the full length video is on my channel as well
What if my bulbs are good. Bad fuse or relay?
That’s possible or it could be a bad ground wire somewhere
I have a crafts ma that has a steering wheel just like that
Are these welders any good?
Well it’s certainly not top of the line and I have two others that I use most of the time however it does work fine for most applications
@shanesmaineshop I'm looking to weld some DIY gym equipment. I shouldn't be welding anything thicker than 1/4". Think this little thing will suffice? Just saw one of FB marketplace here in my area for a couple hundred bucks. Tryin to decide if it's worth it or not.
@@nicthespic3023 The one I have will weld metal that thickness no problem. I’m not sure it’s worth $200 so I would look around personally.
Your videos are too short, all if them!
I have some another 20 minutes long so if you call that too short I’m sorry
Won’t allow change of replacement battery amp hr. My new AGM is 80AH vs OEM’s 75AH.
That sucks
You need to close the drain before starting work.
Not a bad idea.
I got it in Goodwill. I found some 12V, 1amp charger, and there is yellow light and 3 red lights. Green light is off. Does it charge or not, I have no clue? ES2500 I disconnect it, press that button and no lights come on. I only had it for 1 hour charging. Maybe I should wait for 20 hours, or maybe battery is dead.
I have another one that charges but when you push the button none of the lights light up so yours could be charging even though the lights are not lighting up you would have to test it on some thing but I can’t say for sure.
i see you are a school bus driver because a school bus in the in the backround of the video
Yes I drive that school bus but I’m not exactly a school bus driver it’s being converted to an RV/camper
Regardless of the thickness of materials?
Thickness of material does come in to play This was set up for three-quarter inch wood
Thanks.... Worked Perectly.
Your welcome, thanks for taking the time to comment.
So sad. Glad we went two years ago and stayed at the Fantasy Apple. Wonder if they're leaving everything behind?
Yes, it was sold intact everything stayed for the most part, but it will not be a couples resort any more
Do new straps stretch during the first months of use. Should you go back and check them?
They do not stretch, however it’s never a bad idea I go back and check to make sure everything is still tight.
Thank you sir! Excellent video. I repaired my Cadilac in less than an hour. Thank you for taking the time to make this excellent video. You gave me the great, inexpensive and reliable repair. Thanks again!
Thanks for the kind words, I’m glad you were able to fix your car.
No wrong answers
True just depends on situations
Thanks for correcting my concept
Hi I know this is an older video but I'm wondering does this pto take hy-gaurd for fluid or something else?
Originally I believe that’s what they took however I’ve been running power steering fluid in mine now for the past 10 years or so.
@shanesmaineshop Thank you! Also, do you still have your roto tiller, and if so, would you part ways with it? I'm in search of one for a 400. I appreciate your videos they've been very helpful.
@@Leo_SN95 Yes I still have the Rototiller and no I don’t want to part with it, sorry and I’m glad the videos help you out.
i did this once with the chain brake off 😂 scared the shit out of me 😂
Lol
As well it should. This is NOT how you start a chainsaw
@@stevenbrown5210 yes it is and it works great. You can start yours however you want. Thanks for taking the time to comment.