Very sanitary build. I'm a huge fan of traditional Cragars!
@mikekhinkleАй бұрын
😎 NICE, I'M USED TO SEEING YOU BUILD 3 FOOT LONG SHIPS 😉👍👍👍
@tint661Ай бұрын
Your engine detailing is very good. On the valve covers are things sticking up on them. Those are the engine breathers. Their job is to reuse the blow by. If the kit were authentic there would be a breather on one valve cover and the other valve cover would have the engine oil filler cap. The hose from the breather should go to the air cleaner. In race cars however, they do have a breather on each valve cover and they run the hoses to the exhaust headers with a one way valve attached to the header. The one way valve allows the exhaust blow by to go out with the exhaust but not allow the exhaust gases to come into the engine. Hope this helps you in your future engine details. I really like the way you painted your hood and used those decals. I will be doing mine that way too. Good Job !!!
@chestersmodelsАй бұрын
That does help me. Thank you for that. Thanks! 😎
@mikekhinkleАй бұрын
YOUR PEOPLE TURNED OUT PRETTY NEAT!!!😎👍👍👍
@772ModelGarageАй бұрын
Love this build it is soo cool!
@mikekhinkleАй бұрын
IT'S A BEAUTY!!!😎👍👍👍
@mikekhinkleАй бұрын
I LIKE YOUR BUILD, IT TURNED OUT REAL NICE. 😎👍👍👍
@mikekhinkleАй бұрын
YOUR BRONCO TURNED OUT NICELY, I TO DON'T LIKE TIGHT FITTING MODELS!!!😎👍👍👍
@mikekhinkleАй бұрын
YOUR ENGINE LOOKS GREAT, WHAT ARE YOU GOING TO INSTALL IT IN!😎
@NitroModelsAndComicsАй бұрын
I think you missed the piece of clear acetate for the windshield. You woll see it in the manual. You have to cut and fit it as well as drill a hole for the mirror.
@mikekhinkle2 ай бұрын
YOUR TRUCK TURNED OUT AMAZING, NICE JOB 😎👍👍👍
@chestersmodels2 ай бұрын
Thank you! 😊
@michaelhintzmikesminiature18122 ай бұрын
I think your truck looks Great!!! Bronco progress looks Good. I wish you luck at the show. Iceman makes nice stuff. Thanks for sharing
@chestersmodels2 ай бұрын
Thanks! 🙏
@hildeboham10122 ай бұрын
Promo*SM
@hortonshotrodshop20032 ай бұрын
Nice work a lot of people pain the inner fenders black on old mopars when most where body colorthe under side would be as well but people shot undercoating on them so it works black great looking build
@slowridemodelcars16873 ай бұрын
Demon came out great, nice colors and nice details!
@linkpoison55113 ай бұрын
Nice job!!
@LeftCoastModelCarBuilds3 ай бұрын
Very nice build 🤙🏼
@graywolfeternityguitars99773 ай бұрын
looks great good job
@chestersmodels3 ай бұрын
Thank you!
@LSCModels3 ай бұрын
Gorgeous build brother. That turned out real nice.
@chestersmodels3 ай бұрын
Thank you
@mikekhinkle3 ай бұрын
LOOKS VERY NICE, I LIKE THE ENGINE DETAILS AND WIRING. GREAT JOB!!!😎👍👍👍
@chestersmodels3 ай бұрын
Thank you 😎
@chesterlewis62303 ай бұрын
Very nice looking
@chestersmodels3 ай бұрын
Thanks
@scooterdoughmas30123 ай бұрын
dou great vid she's going to killer sweet love the color got me tinkin candy 😁🤩scooter d😎ps been wanting a Demon 4 ever mines on the way thx 4 the show incredible attention to detail i must say😅😋
@chestersmodels3 ай бұрын
😁 thank you 😎
@moparnut62863 ай бұрын
Very nice Mopar A body build.
@chestersmodels3 ай бұрын
Thank you!
@ScaleSpeedworks3 ай бұрын
Looks great! Do you mind putting the make/model of the airbrush and the PSI you shot at in the video description? Thanks 👍
@chestersmodels3 ай бұрын
Thank you! Sure thing
@mikekhinkle3 ай бұрын
YOUR CAR TURNED OUT AMAZING, LOOKS NICE!!😎👍👍👍
@chestersmodels3 ай бұрын
Thank you! Cheers!
@michaelhintzmikesminiature18123 ай бұрын
I bought the same kit because I like the way it looked to. She turned out Great!!! Thanks for sharing.
@drafting56523 ай бұрын
Very cool 🏁
@chestersmodels3 ай бұрын
Thanks!
@ronstewart97923 ай бұрын
Wow that looks awesome Chester. Great build. Ron
@chestersmodels3 ай бұрын
Thank you
@chipwalker36103 ай бұрын
Someday I'll try my hand at this, 1st I have to finish the 30 or so I'm working on now.
@goforitpainting3 ай бұрын
Looks cool. 👍
@iancameron1983 ай бұрын
Do you thin your paints if so .how do you do it
@chestersmodels3 ай бұрын
Yes I usually do 25-30% thinner to 70-75 paint. The clear tamyia paints sometimes I have to do more thinner depending on how thick it is.
@josephcivita14503 ай бұрын
The Jo-han series of 31 Cadillacs had outstanding detail that still holds up today. I love them.
@chestersmodels3 ай бұрын
This kit was actually pretty good going together. It was halfway started when I got it. I just to finish and paint it.
@hotrodmodeler46494 ай бұрын
Can't go wrong with a black and red combination! Great build! I have this build about 70 percent complete.
@mikekhinkle4 ай бұрын
LOOKS GREAT, HAS KIND OF A MEAN LOOK TO IT.😎
@chestersmodels4 ай бұрын
Thank you 😊
@chipwalker36104 ай бұрын
When you paint your bodies start at the front or rear bottom spraying front to rear or rear to front working your way up, your 1st 2 coats will just about cover your 3rd coat will be your wettest. It looks like your spraying to narrow a fan. When you make a pass you should be spraying at least half the width of the body on the sides. On the top it should be by 3rds. I've been building models off and on since I was 4
@ScaleSpeedworks4 ай бұрын
Great looking build! I love the black and red combo 😆
@chestersmodels4 ай бұрын
Thanks!
@mrupscale4 ай бұрын
great job!!
@jameslarosa23964 ай бұрын
Great looking job.
@anthonyhendricks73774 ай бұрын
Very nice build. 👌
@chestersmodels4 ай бұрын
Thanks 😊
@LSCModels4 ай бұрын
Awesome build brother. Great video. Me enjoyed this. Keep brining them buddy.
@chestersmodels4 ай бұрын
Thank you . Appreciate it!
@pappytinkers4 ай бұрын
Looks like a real nice kit and a beautiful build!
@chestersmodels4 ай бұрын
Yes it is. Thanks!
@pappytinkers4 ай бұрын
It's good to branch out and try other types of kits. I haven't tried a big figure like this but i am working on a couple 1/25 scale figures to set along side the cars
@pappytinkers4 ай бұрын
Looks very nice! I need to make something like that
@chestersmodels4 ай бұрын
Thanks! It was an idea I had for a while and kept putting it off.
@LSCModels4 ай бұрын
Nice display brother. Love the car. Great job buddy.
@chestersmodels4 ай бұрын
Thank you!
@marsgarage82174 ай бұрын
Thanks for the display tutorial..looks nice.👍
@chestersmodels4 ай бұрын
Thanks!
@modelcar15894 ай бұрын
Nice job 👍🏿
@chestersmodels4 ай бұрын
Thank you
@mikekhinkle4 ай бұрын
YOUR DISPLAY BOX TURNED OUT AMAZING, NICE JOB!!😎👍👍👍
Пікірлер
Very sanitary build. I'm a huge fan of traditional Cragars!
😎 NICE, I'M USED TO SEEING YOU BUILD 3 FOOT LONG SHIPS 😉👍👍👍
Your engine detailing is very good. On the valve covers are things sticking up on them. Those are the engine breathers. Their job is to reuse the blow by. If the kit were authentic there would be a breather on one valve cover and the other valve cover would have the engine oil filler cap. The hose from the breather should go to the air cleaner. In race cars however, they do have a breather on each valve cover and they run the hoses to the exhaust headers with a one way valve attached to the header. The one way valve allows the exhaust blow by to go out with the exhaust but not allow the exhaust gases to come into the engine. Hope this helps you in your future engine details. I really like the way you painted your hood and used those decals. I will be doing mine that way too. Good Job !!!
That does help me. Thank you for that. Thanks! 😎
YOUR PEOPLE TURNED OUT PRETTY NEAT!!!😎👍👍👍
Love this build it is soo cool!
IT'S A BEAUTY!!!😎👍👍👍
I LIKE YOUR BUILD, IT TURNED OUT REAL NICE. 😎👍👍👍
YOUR BRONCO TURNED OUT NICELY, I TO DON'T LIKE TIGHT FITTING MODELS!!!😎👍👍👍
YOUR ENGINE LOOKS GREAT, WHAT ARE YOU GOING TO INSTALL IT IN!😎
I think you missed the piece of clear acetate for the windshield. You woll see it in the manual. You have to cut and fit it as well as drill a hole for the mirror.
YOUR TRUCK TURNED OUT AMAZING, NICE JOB 😎👍👍👍
Thank you! 😊
I think your truck looks Great!!! Bronco progress looks Good. I wish you luck at the show. Iceman makes nice stuff. Thanks for sharing
Thanks! 🙏
Promo*SM
Nice work a lot of people pain the inner fenders black on old mopars when most where body colorthe under side would be as well but people shot undercoating on them so it works black great looking build
Demon came out great, nice colors and nice details!
Nice job!!
Very nice build 🤙🏼
looks great good job
Thank you!
Gorgeous build brother. That turned out real nice.
Thank you
LOOKS VERY NICE, I LIKE THE ENGINE DETAILS AND WIRING. GREAT JOB!!!😎👍👍👍
Thank you 😎
Very nice looking
Thanks
dou great vid she's going to killer sweet love the color got me tinkin candy 😁🤩scooter d😎ps been wanting a Demon 4 ever mines on the way thx 4 the show incredible attention to detail i must say😅😋
😁 thank you 😎
Very nice Mopar A body build.
Thank you!
Looks great! Do you mind putting the make/model of the airbrush and the PSI you shot at in the video description? Thanks 👍
Thank you! Sure thing
YOUR CAR TURNED OUT AMAZING, LOOKS NICE!!😎👍👍👍
Thank you! Cheers!
I bought the same kit because I like the way it looked to. She turned out Great!!! Thanks for sharing.
Very cool 🏁
Thanks!
Wow that looks awesome Chester. Great build. Ron
Thank you
Someday I'll try my hand at this, 1st I have to finish the 30 or so I'm working on now.
Looks cool. 👍
Do you thin your paints if so .how do you do it
Yes I usually do 25-30% thinner to 70-75 paint. The clear tamyia paints sometimes I have to do more thinner depending on how thick it is.
The Jo-han series of 31 Cadillacs had outstanding detail that still holds up today. I love them.
This kit was actually pretty good going together. It was halfway started when I got it. I just to finish and paint it.
Can't go wrong with a black and red combination! Great build! I have this build about 70 percent complete.
LOOKS GREAT, HAS KIND OF A MEAN LOOK TO IT.😎
Thank you 😊
When you paint your bodies start at the front or rear bottom spraying front to rear or rear to front working your way up, your 1st 2 coats will just about cover your 3rd coat will be your wettest. It looks like your spraying to narrow a fan. When you make a pass you should be spraying at least half the width of the body on the sides. On the top it should be by 3rds. I've been building models off and on since I was 4
Great looking build! I love the black and red combo 😆
Thanks!
great job!!
Great looking job.
Very nice build. 👌
Thanks 😊
Awesome build brother. Great video. Me enjoyed this. Keep brining them buddy.
Thank you . Appreciate it!
Looks like a real nice kit and a beautiful build!
Yes it is. Thanks!
It's good to branch out and try other types of kits. I haven't tried a big figure like this but i am working on a couple 1/25 scale figures to set along side the cars
Looks very nice! I need to make something like that
Thanks! It was an idea I had for a while and kept putting it off.
Nice display brother. Love the car. Great job buddy.
Thank you!
Thanks for the display tutorial..looks nice.👍
Thanks!
Nice job 👍🏿
Thank you
YOUR DISPLAY BOX TURNED OUT AMAZING, NICE JOB!!😎👍👍👍
Thanks!
Cool model.
Looks cool. 🐭
Looks cool.
Thank you