WTF did you say at 1:21. It sounded like you said, make sure you don't power without truck fully on. WTF did you say?
@ricardosworkshop5 сағат бұрын
I wish the right word came to me as I record. What I meant is... power the truck on without starting the engine. Just on accessory mode.
@jeffdieli889810 сағат бұрын
Question, anyone that has performed this function have their windows go up automatically if your windows are down and car is off ? I did not double tap the lock button for the windows to go back up. Wondering if that additional final step in video had something to do with this?
@Fuuzooo20 сағат бұрын
So I have a 2024 that came with the stock Sub/Amp. Should I follow your input (26) or (2A) for the rear speakers. I'm asking cuz I have 4x 4inch in the dahs/rear JBL speakers coming in next weekend.
@ricardosworkshop5 сағат бұрын
I believe 2A would sound better, but you should try both. See what works best with your setup.
@brentneahring279723 сағат бұрын
My 2015 Taurus SHO never seems to learn the shift points correctly. Im probably gonna get ahold of my local dealership and ask the tables to be reset and halted. I was told there was no issue with the engine or transmission
@cslack192 күн бұрын
Where do you find what codes and in what module to change things in forscan? Is there a master list somewhere?
@ricardosworkshop5 сағат бұрын
Yiu can find them on a Bronco or Forscan forum or at forscan.org
@robertkhan69473 күн бұрын
I cannot thank you enough for your help, I was in a bad place being a technophobe!
@TerrysWiredLife4 күн бұрын
What happens if you are in your vehicle with the doors locked and have your fob next to you and someone comes up to your vehicle and tries to open your door? Will the door unlock?
@ricardosworkshop5 сағат бұрын
No, Not while the vehicle is on. But if it's off, it might trigger it to unlock
@tedlahm57407 күн бұрын
put the key INTO the driver door. Turn left unlock front door only option.
@ricardosworkshop6 күн бұрын
Sounds like witchery, LOL. Thanks for watching!
@ricardosworkshop6 күн бұрын
Yes! Just uploaded that video 😀
@Paulanaestradadavida8 күн бұрын
All of them
@ricardosworkshop7 күн бұрын
Me too! Efficiency
@voxel9998 күн бұрын
Dumb questions... you changed the rears to 26 which is "Speaker & Tweeter" on Rear Driver's side and "Tweeter & Sub" on the Rear Passenger side. Why not 2A so the Rear Passenger side has "Speaker & Tweeter & Sub"? You don't want a speaker on that side?
@ricardosworkshop7 күн бұрын
I think the A is for sub in the back cargo area. I didn't try that with these speakers, but I think you'd need an amp and sub for that.
@Fuuzooo2 күн бұрын
@@ricardosworkshop So I have a 2024 that came with the stock Sub/Amp. Should I follow your input (26) or (2A) for the rear speakers. I'm asking cuz I have 4x 4inch JBL speakers coming in next weekend.
@SergioGurrola8 күн бұрын
Ricardo where did you get the Mexico emblem flag on your f150? It looks so good I want the same
@ricardosworkshop7 күн бұрын
It's either Ebay or Amazon. Search México Flag Emblem
@SergioGurrola7 күн бұрын
@@ricardosworkshop gracias wei
@chadwilliams68488 күн бұрын
Nice. Any idea if this is the same on the Bronco?
@ricardosworkshop5 сағат бұрын
It's not. I've been looking for a way to do this. Hopefully we'll figure it out soon
@bobp238911 күн бұрын
BUMPERS ARE FOR BUMPNG - NOT SENSORS: Let The Buyer Beware - Save Thousands of Dollars by not buying Cars with Sensors on Bumpers or on Hot Windshields. Many cars have 6th grade Design Engineering - Sensors on front and back bumpers and on Hot Windshields. Many OEM. I have a Camry 2018 bought after hearing of 20 years of low maintenance - now dealing with sensors for LDA and Collision on Module on Hot Windshield - so I get Christmas Tree Alerts in Hot Weather from what I can gather from research. And after I found this out - I realized sensors are in the middle of a Front Bumper Logo - nuts!. A small bump into your bumper which might be $300 can turn into a major cost. Do Not Buy Card with Sensors on bumpers - bumpers are for bumping. Tell OEMs to put sensors in more protective areas, and do not overdue sensors to create problems instead of resolving problems. We all know OEMs for decades hide small Water Hoses, hide Spark Plugs, hide thermostats and sensors for engines too - the PEOPLE MUST SPEAK OUT because the car manufacturers do not care and think people do not have time to complain. Try even to send OEMs an email - IMPOSSIBLE.
@Offroading198611 күн бұрын
Where do you download forscan
@shishido710 күн бұрын
If you have to ask this, I highly recommend you don’t forscan your Bronco.
@mac951512 күн бұрын
Waving the camera back & forth is not helpful.....
@ricardosworkshop5 сағат бұрын
Thanks for watching! What part was waving around?
@taylorsampson543413 күн бұрын
Your truck got some big ears 😂😂 Badass bumper bro
@ricardosworkshop5 сағат бұрын
Lol... thanks bro. It's Viics daily.
@kkMotiveperformance14 күн бұрын
bro the yellow is airbags
@ricardosworkshop5 сағат бұрын
That's what I figured. Thanks for confirming!
@cesarperalta673115 күн бұрын
I have a 2017 f-150 and install 35' but when i change the parameters, turn on the maintenance key in the cluster
@ricardosworkshop5 сағат бұрын
Yes. You have to reset the transmission too. I just did this on the Bronco
@ifechisoyemi318517 күн бұрын
I can make bytter Dan him😂😅😂😅😂😅😅 😂😅heheheh
@ifechisoyemi318517 күн бұрын
What a this is so bad ho can you gyus like this a,m reelle hate IT
@dwayner659719 күн бұрын
This is called brake slapping. Not the proper way to do brakes.
@ricardosworkshop19 күн бұрын
Lol... That's great. Thanks
@ItsMeJbird20 күн бұрын
My steering wheel looks like yours, they don't ware too good. Im thinking about getting a new one.
@ricardosworkshop5 сағат бұрын
I thought about a raptor one, but the price is crazy
@kylemedley329421 күн бұрын
Your video helped me so much thanks bro
@TheSwordRules21 күн бұрын
Thanks for the videos you do. Your Forscan video helped me. One tip for you - When removing those plastic push pin rivets, just pop the center pin up a bit then reposition your tool under the fastener lip to remove them together. Helps to keep from losing them too.
@mw3designs22 күн бұрын
Can you make changes such as tire size with Forscan Lite iOS?
@emptybottleof15122 күн бұрын
Whats the name of the ratchet tool that you used?
@Outlaw65325 күн бұрын
I was about to think that it was impossible to change these pads until I watched this video. Thanks a million dude.
@ricardosworkshop5 сағат бұрын
Glad I could help!
@adamgoof25 күн бұрын
I replaced my Radiator at 300,000 miles. When do I need to replace my AC condenser? I had the original Radiator from day one 2016 outlander sport 330,000 miles replace the raider at 250,000.
@codydiek798127 күн бұрын
I wonder if these are the same codes for 2023-2024 F250?
@brentkhack640429 күн бұрын
The inner pads with the "bunny ears", I think they don't make that style anymore.
@DnsndndnndАй бұрын
No way to do this without that OBD wire and computer?
@clashwithmoi8926Ай бұрын
I love my chimes
@DuyTran-j3zАй бұрын
I have 2020 expedition without trailer control, how can I enable engine temperature?
@user-sm2ut9ki1lАй бұрын
Where can I get the forscan
@ixispazerixi1672Ай бұрын
They don’t look they cover much vs TuxMat but similar to Weathetech
@TEAST23Ай бұрын
Crazy that this isn't enabled from the factory.
@PaulanaestradadavidaАй бұрын
Does it work on Ford Broncos?
@jungbae3Ай бұрын
Aren't rear only speakers not speaker tweeter
@ricardosworkshopАй бұрын
They are small mids. Might have some highs but not as much as an actual tweeter
@nealwright5630Ай бұрын
Ford dealership quoted $1500 for new rails this morning. They don't sell the slide parts anymore. So, basically, they screwed the design of this and are now making bank on repairing them at $3, to $4k.
@joeteichert6821Ай бұрын
This procedure worked with my 2023 F-150 Lightning Lariat. Thanks for posting!
@FullychargedLLC28 күн бұрын
Great bc I about to ask lol
@mychannel2877Ай бұрын
I wanted to share my experience with everyone... I have a 2024 Bronco (Big Bend) hard top and I replaced all 4 factory speakers with 6.75" component Kicker 47KSS6704 (125 Watts RMS each speaker), and did this ForScan tweak too... In my experience, the new speakers sound a little better (and louder) but they don't seem to have low end frequencies, even after removing the Ford EQ and setting the speakers to "Speaker & Tweeter". I've tried two different amps and still not very happy. Although, they are a little better than factory in the sense that they are louder. I do have a second amp connected to a 10" Kicker subwoofer and the aftermarket subwoofer sounds great, which helps fill in the missing low frequencies from the Kicker speakers... But, I want the speakers to have low end too so they can sound full. Ricardo.... I know you said your speakers sound better now but are you noticing that they are lacking in low-end frequencies, although they may sound better than factory? Which speakers did you install? Thanks for your input. Just curious. I hate to even say this but I feel like my factory speakers sounded better (but not as loud as my Kickers). lol. I had the standard stereo system, not the premium B&O.
@louispena4735Ай бұрын
Dude I'm having the same issue sorta with my 2024 big bends I replaced the front dash speakers with 4 " JL audios with 300hz bass blockers, 6 1/2 JL audios in the rear mabett pods .. now I have more bass and no highs I haven't messed with forscan but the front dash speakers have alot of bass even with the bass blockers! The rears did wake up and sound better but Something must be off I gotta take a second look ...to be continued
@ricardosworkshopАй бұрын
I feel you. I think mine is so much better than stock. But I don't have strong lows either. I think the only way is by adding a small amp and a good subwoofer. But no way did mine sound better as stock.
@mychannel287728 күн бұрын
@@louispena4735 Interesting! Did you install an aftermarket amp to power the JL speakers? For me, I installed an aftermarket JL 4-channel amp (and also a Pioneer amp for my aftermarket 10" tailgate subwoofer). I don't have much mid-bass from any of my 6.75" Kickers and I feel like I'm getting a little bit of distortion too even after adjusting the levels on the aftermarket amp and AudioControl LC7i line-out converter. I don't know if it's the KS series of Kicker speakers that suck or if it's the Bronco's ACM (even though I turned off the factory EQ using Forscan). Or maybe the issue is with the AudioControl LC7i line-out converter! Who knows! Although I feel like I did a good job tuning those levels. I know you can open up the LC7i and adjust more settings in it on the mother board but I dont know if that's the issues. Here's a helpful video regarding the LC7i in case anyone wants to understand is better: kzread.info/dash/bejne/mapktcydgaaznbg.html
@mychannel287728 күн бұрын
@@ricardosworkshop I agree, it does sound a little better (louder) than the stock for me. But something still doesn't sound right! Unless the Kicker KS speakers just suck? I'm not getting a full range out of these. The midbass kinda sucks and there's a little bit of distortion too. I added a great aftermarket JL 4-channel amp plus a very powerful Pioneer amp for the 10" Kicker subwoofer I installed on the tailgate. But the speakers still sound off. They're lacking. I tried couple different amps too so I know it's not the amps. It's either the Kicker speakers, or the Bronco's ACM unit, or the LC7i line-out converter, or maybe the factory amp that came with the car. I'm not sure. I had a pro shop installed everything and still doesn't sound right. Especially with songs that have a lot of bass like dance music or hiphop. The aftermarket subwoofer works fine. I used Forscan to turn off the factory subwoofer that came with my 2024 Bronco, which worked, but lacks in power compared to the aftermarket 10" sub.
@louispena473528 күн бұрын
@mychannel2877 Update- I removed the 300hz bass blockers and installed 600hz , went into forscan took off the eq, put the back speakers to speaker tweeter and installed the kicker key 200 ..did the auto tune and now it sounds night and day different still have the factory subwoofer but it sounds so much better the kicker key is the best upgrade you can do for these broncos I recommend replacing the cheap stock speakers as well the sounds soundstage up front is so much more lively and you can hear the rear speakers as well
@michaeldayton8934Ай бұрын
Thank you for explaining this in such step-by-step detail. I just started with Forscan and you are the first person I've found who has made a video on how to backup your system with such detail that it's like you're teaching the first day of kindergarten, because that's what we newbies are, Forscan kindergarteners, and this is the kind of detail we need to make sure we back up our data without screwing up a $60K+ truck. Thank you! (Subscribed)
@Daveed273Ай бұрын
You mean to tell me the sunroof repair is that easy?!?
@jezzie1965Ай бұрын
If the goal is to remove it just cut the wires use regular socket and open wrench it back on
@waynehearst317Ай бұрын
DO NOT CUT anything. Take a torch, heat up the crash bars for at least 45 seconds until you see some visual pitting. Take your 2lb rubber mallet and give it 3-5 good THWACKS. Job done in 3 minutes, no need to paint, sand or make any permanent mods. I just did this to my 2021 and it's GREAT.
@namenotfuoudАй бұрын
Fml I broke it.
@Submarine_SeXJАй бұрын
Will this work for a 2020 mustang??
@colliswilliams8992Ай бұрын
This only operates the driver and passenger window. If the sunroof or rear windows are open, this doesn't close them.
@jesustrevino3452Ай бұрын
Can you make a video on programming an electric power steering
Пікірлер
WTF did you say at 1:21. It sounded like you said, make sure you don't power without truck fully on. WTF did you say?
I wish the right word came to me as I record. What I meant is... power the truck on without starting the engine. Just on accessory mode.
Question, anyone that has performed this function have their windows go up automatically if your windows are down and car is off ? I did not double tap the lock button for the windows to go back up. Wondering if that additional final step in video had something to do with this?
So I have a 2024 that came with the stock Sub/Amp. Should I follow your input (26) or (2A) for the rear speakers. I'm asking cuz I have 4x 4inch in the dahs/rear JBL speakers coming in next weekend.
I believe 2A would sound better, but you should try both. See what works best with your setup.
My 2015 Taurus SHO never seems to learn the shift points correctly. Im probably gonna get ahold of my local dealership and ask the tables to be reset and halted. I was told there was no issue with the engine or transmission
Where do you find what codes and in what module to change things in forscan? Is there a master list somewhere?
Yiu can find them on a Bronco or Forscan forum or at forscan.org
I cannot thank you enough for your help, I was in a bad place being a technophobe!
What happens if you are in your vehicle with the doors locked and have your fob next to you and someone comes up to your vehicle and tries to open your door? Will the door unlock?
No, Not while the vehicle is on. But if it's off, it might trigger it to unlock
put the key INTO the driver door. Turn left unlock front door only option.
Sounds like witchery, LOL. Thanks for watching!
Yes! Just uploaded that video 😀
All of them
Me too! Efficiency
Dumb questions... you changed the rears to 26 which is "Speaker & Tweeter" on Rear Driver's side and "Tweeter & Sub" on the Rear Passenger side. Why not 2A so the Rear Passenger side has "Speaker & Tweeter & Sub"? You don't want a speaker on that side?
I think the A is for sub in the back cargo area. I didn't try that with these speakers, but I think you'd need an amp and sub for that.
@@ricardosworkshop So I have a 2024 that came with the stock Sub/Amp. Should I follow your input (26) or (2A) for the rear speakers. I'm asking cuz I have 4x 4inch JBL speakers coming in next weekend.
Ricardo where did you get the Mexico emblem flag on your f150? It looks so good I want the same
It's either Ebay or Amazon. Search México Flag Emblem
@@ricardosworkshop gracias wei
Nice. Any idea if this is the same on the Bronco?
It's not. I've been looking for a way to do this. Hopefully we'll figure it out soon
BUMPERS ARE FOR BUMPNG - NOT SENSORS: Let The Buyer Beware - Save Thousands of Dollars by not buying Cars with Sensors on Bumpers or on Hot Windshields. Many cars have 6th grade Design Engineering - Sensors on front and back bumpers and on Hot Windshields. Many OEM. I have a Camry 2018 bought after hearing of 20 years of low maintenance - now dealing with sensors for LDA and Collision on Module on Hot Windshield - so I get Christmas Tree Alerts in Hot Weather from what I can gather from research. And after I found this out - I realized sensors are in the middle of a Front Bumper Logo - nuts!. A small bump into your bumper which might be $300 can turn into a major cost. Do Not Buy Card with Sensors on bumpers - bumpers are for bumping. Tell OEMs to put sensors in more protective areas, and do not overdue sensors to create problems instead of resolving problems. We all know OEMs for decades hide small Water Hoses, hide Spark Plugs, hide thermostats and sensors for engines too - the PEOPLE MUST SPEAK OUT because the car manufacturers do not care and think people do not have time to complain. Try even to send OEMs an email - IMPOSSIBLE.
Where do you download forscan
If you have to ask this, I highly recommend you don’t forscan your Bronco.
Waving the camera back & forth is not helpful.....
Thanks for watching! What part was waving around?
Your truck got some big ears 😂😂 Badass bumper bro
Lol... thanks bro. It's Viics daily.
bro the yellow is airbags
That's what I figured. Thanks for confirming!
I have a 2017 f-150 and install 35' but when i change the parameters, turn on the maintenance key in the cluster
Yes. You have to reset the transmission too. I just did this on the Bronco
I can make bytter Dan him😂😅😂😅😂😅😅 😂😅heheheh
What a this is so bad ho can you gyus like this a,m reelle hate IT
This is called brake slapping. Not the proper way to do brakes.
Lol... That's great. Thanks
My steering wheel looks like yours, they don't ware too good. Im thinking about getting a new one.
I thought about a raptor one, but the price is crazy
Your video helped me so much thanks bro
Thanks for the videos you do. Your Forscan video helped me. One tip for you - When removing those plastic push pin rivets, just pop the center pin up a bit then reposition your tool under the fastener lip to remove them together. Helps to keep from losing them too.
Can you make changes such as tire size with Forscan Lite iOS?
Whats the name of the ratchet tool that you used?
I was about to think that it was impossible to change these pads until I watched this video. Thanks a million dude.
Glad I could help!
I replaced my Radiator at 300,000 miles. When do I need to replace my AC condenser? I had the original Radiator from day one 2016 outlander sport 330,000 miles replace the raider at 250,000.
I wonder if these are the same codes for 2023-2024 F250?
The inner pads with the "bunny ears", I think they don't make that style anymore.
No way to do this without that OBD wire and computer?
I love my chimes
I have 2020 expedition without trailer control, how can I enable engine temperature?
Where can I get the forscan
They don’t look they cover much vs TuxMat but similar to Weathetech
Crazy that this isn't enabled from the factory.
Does it work on Ford Broncos?
Aren't rear only speakers not speaker tweeter
They are small mids. Might have some highs but not as much as an actual tweeter
Ford dealership quoted $1500 for new rails this morning. They don't sell the slide parts anymore. So, basically, they screwed the design of this and are now making bank on repairing them at $3, to $4k.
This procedure worked with my 2023 F-150 Lightning Lariat. Thanks for posting!
Great bc I about to ask lol
I wanted to share my experience with everyone... I have a 2024 Bronco (Big Bend) hard top and I replaced all 4 factory speakers with 6.75" component Kicker 47KSS6704 (125 Watts RMS each speaker), and did this ForScan tweak too... In my experience, the new speakers sound a little better (and louder) but they don't seem to have low end frequencies, even after removing the Ford EQ and setting the speakers to "Speaker & Tweeter". I've tried two different amps and still not very happy. Although, they are a little better than factory in the sense that they are louder. I do have a second amp connected to a 10" Kicker subwoofer and the aftermarket subwoofer sounds great, which helps fill in the missing low frequencies from the Kicker speakers... But, I want the speakers to have low end too so they can sound full. Ricardo.... I know you said your speakers sound better now but are you noticing that they are lacking in low-end frequencies, although they may sound better than factory? Which speakers did you install? Thanks for your input. Just curious. I hate to even say this but I feel like my factory speakers sounded better (but not as loud as my Kickers). lol. I had the standard stereo system, not the premium B&O.
Dude I'm having the same issue sorta with my 2024 big bends I replaced the front dash speakers with 4 " JL audios with 300hz bass blockers, 6 1/2 JL audios in the rear mabett pods .. now I have more bass and no highs I haven't messed with forscan but the front dash speakers have alot of bass even with the bass blockers! The rears did wake up and sound better but Something must be off I gotta take a second look ...to be continued
I feel you. I think mine is so much better than stock. But I don't have strong lows either. I think the only way is by adding a small amp and a good subwoofer. But no way did mine sound better as stock.
@@louispena4735 Interesting! Did you install an aftermarket amp to power the JL speakers? For me, I installed an aftermarket JL 4-channel amp (and also a Pioneer amp for my aftermarket 10" tailgate subwoofer). I don't have much mid-bass from any of my 6.75" Kickers and I feel like I'm getting a little bit of distortion too even after adjusting the levels on the aftermarket amp and AudioControl LC7i line-out converter. I don't know if it's the KS series of Kicker speakers that suck or if it's the Bronco's ACM (even though I turned off the factory EQ using Forscan). Or maybe the issue is with the AudioControl LC7i line-out converter! Who knows! Although I feel like I did a good job tuning those levels. I know you can open up the LC7i and adjust more settings in it on the mother board but I dont know if that's the issues. Here's a helpful video regarding the LC7i in case anyone wants to understand is better: kzread.info/dash/bejne/mapktcydgaaznbg.html
@@ricardosworkshop I agree, it does sound a little better (louder) than the stock for me. But something still doesn't sound right! Unless the Kicker KS speakers just suck? I'm not getting a full range out of these. The midbass kinda sucks and there's a little bit of distortion too. I added a great aftermarket JL 4-channel amp plus a very powerful Pioneer amp for the 10" Kicker subwoofer I installed on the tailgate. But the speakers still sound off. They're lacking. I tried couple different amps too so I know it's not the amps. It's either the Kicker speakers, or the Bronco's ACM unit, or the LC7i line-out converter, or maybe the factory amp that came with the car. I'm not sure. I had a pro shop installed everything and still doesn't sound right. Especially with songs that have a lot of bass like dance music or hiphop. The aftermarket subwoofer works fine. I used Forscan to turn off the factory subwoofer that came with my 2024 Bronco, which worked, but lacks in power compared to the aftermarket 10" sub.
@mychannel2877 Update- I removed the 300hz bass blockers and installed 600hz , went into forscan took off the eq, put the back speakers to speaker tweeter and installed the kicker key 200 ..did the auto tune and now it sounds night and day different still have the factory subwoofer but it sounds so much better the kicker key is the best upgrade you can do for these broncos I recommend replacing the cheap stock speakers as well the sounds soundstage up front is so much more lively and you can hear the rear speakers as well
Thank you for explaining this in such step-by-step detail. I just started with Forscan and you are the first person I've found who has made a video on how to backup your system with such detail that it's like you're teaching the first day of kindergarten, because that's what we newbies are, Forscan kindergarteners, and this is the kind of detail we need to make sure we back up our data without screwing up a $60K+ truck. Thank you! (Subscribed)
You mean to tell me the sunroof repair is that easy?!?
If the goal is to remove it just cut the wires use regular socket and open wrench it back on
DO NOT CUT anything. Take a torch, heat up the crash bars for at least 45 seconds until you see some visual pitting. Take your 2lb rubber mallet and give it 3-5 good THWACKS. Job done in 3 minutes, no need to paint, sand or make any permanent mods. I just did this to my 2021 and it's GREAT.
Fml I broke it.
Will this work for a 2020 mustang??
This only operates the driver and passenger window. If the sunroof or rear windows are open, this doesn't close them.
Can you make a video on programming an electric power steering
Best video on this. How did this affect your MPG?