Пікірлер

• 
  @gonzalomarsilli574110 сағат бұрын

  excellent tutorial! I learned almost everything that i needed in 40 minutes thank you!!

• 
  @ElectronisoundsAudio10 сағат бұрын

  Big Ups! Thanks for watching! 😁🙏👊

• 
  @G0nz0uk2 күн бұрын

  Learning VCV Rack then I found this for the iPad last night! Great vid, I want to connect it up to my DAWless gear next.

• 
  @ElectronisoundsAudioКүн бұрын

  Hey Hey! Thanks for watching! 😁🙏👊

• 
  @verstecktsein56393 күн бұрын

  teknival style 💘

• 
  @ElectronisoundsAudio3 күн бұрын

  Thanks for taking the time to check this out! Big Ups! 😁🙏👊

• 
  @MrSquidzzy3 күн бұрын

  You got to bring back the Mirack vids!!!! Also this is great, sounds similar to Burial haha

• 
  @ElectronisoundsAudio3 күн бұрын

  Yo! Thanks for taking the time to check this out! Big Ups! 😁🙏👊

• 
  @richardmalouin90853 күн бұрын

  Thank you, you made this tutorial very painless, snappy and fun

• 
  @ElectronisoundsAudio3 күн бұрын

  That's great to hear! Thanks for watching! 😁🙏👊

• 
  @aberges3 күн бұрын

  A shame this beauty has gone discontinued

• 
  @ElectronisoundsAudio3 күн бұрын

  Agreed! 👊

• 
  @gd-cm9qe4 күн бұрын

  Thank you for this!!! This fixed my jittery EMX. Just a heads up to anyone cleaning the potentiometer knobs. I’d recommend NOT using a CRC contact cleaner, tried it on a knob and now it is turns too loose. Stick with a Deoxit fader lube and apply a very small amount.

• 
  @ElectronisoundsAudio3 күн бұрын

  Glad it helped! 😁🙏👊

• 
  @bexiexz4 күн бұрын

  so heavy i love this

• 
  @ElectronisoundsAudio4 күн бұрын

  Big Ups! Thanks for taking the time to check it out! 😁🙏👊

• 
  @bexiexz4 күн бұрын

  @@ElectronisoundsAudio ofc! 🤍

• 
  @guitdafunkadelik4 күн бұрын

  thanks for this tuto! Does anyone knows if it's possible and how to simultaneously make the ES9 communicate between Mirack and Ableton? eg : I want to monitor audio from my modular rig from ES9 audio 1 to Ableton and use an LFO from mirack out of ES9 to my modular rig Thanks!!

• 
  @ElectronisoundsAudio4 күн бұрын

  Sorry, not sure about the ES9, I don't have one. 👊

• 
  @guitdafunkadelik4 күн бұрын

  @@ElectronisoundsAudio my mistake. Does it work with your Befaco Audio interface?

• 
  @ElectronisoundsAudio4 күн бұрын

  @@guitdafunkadelik You can send BOTH audio and/or CV from Mirack through the Befaco AC/DC, yes. :)

• 
  @guitdafunkadelik4 күн бұрын

  @@ElectronisoundsAudio thanks! Is it possible to create an aggregate device so that I can send CV/audio from mirack to my modular while recordings audio from my modular to a Daw (ableton)

• 
  @ElectronisoundsAudio3 күн бұрын

  @@guitdafunkadelik Sorry, I don't know anything about using aggregate devices on a Mac. I don't use it that way.

• 
  @pablotorres81525 күн бұрын

  What program you use to récord no iPad, looks really nice

• 
  @ElectronisoundsAudio5 күн бұрын

  Hey Hey! Thanks for watching! 😁🙏👊 I think you're asking about Beatmaker 3 - I've done a ton of videos on it. Here's my full BM3 playlist if you want to learn more: kzread.info/head/PLK5Ai5ysFp2t8ial-x5lQ9DN7zbAK9GY6&si=3NY1EsxbasgHYd0F

• 
  @mwhitelow931210 күн бұрын

  I’ve been waiting years to get this thing and I finally pulled the trigger. Great vid as always Dean!

• 
  @ElectronisoundsAudio10 күн бұрын

  Hey Hey! Thanks for taking the time to watch! Big Ups! 😁🙏👊

• 
  @KingzofSwing11 күн бұрын

  Those sounds are sweet

• 
  @ElectronisoundsAudio11 күн бұрын

  Hey Hey! Thanks for taking the time to check this out! 😁🙏👊

• 
  @Blackeyedangel13 күн бұрын

  thanks for this video. I've been just using an external 4ms box to power it, but honestly I'm quite frustrated with the fact my big case powers EVERYTHING but this. I even ripped every module out and it still wouldn't power this thing. 1010 really fucked up on this. Also, it draws so much current that it gets hot as fuck. Quite scary if you ask me. How are you timing everything so that the 1010 stays in time but when you turn off the sequencer it doesn't lose the tails on the bluebox? I saw RMR had to set up extra switches etc. it's really kind of stupid design.

• 
  @ElectronisoundsAudio13 күн бұрын

  To answer your midi sync question about the tails cutting off, I've not been using midi sync because of exactly this.... :( :( :(

• 
  @erikgeerling410015 күн бұрын

  Hey hallo , great video but .. Ican't drag the énd window into my ipad , the cursor etc is all working with my ipad but i can't drag the ableton into my ipad , do you know's that about ? Soo annoying hahaha .. ( And another short question, do you know if i can use Ozone as a seperate mastering app on my ipad ? ( for ableton)

• 
  @ElectronisoundsAudio15 күн бұрын

  Hey Hey! It's been 5 years since I used this setup, so I can't be sure why you can drag the second Ableton screen into your iPad. Are you using 2 screen mode in Ableton by default? It has to be enabled inside of Ableton first if i remember correctly... No, Ozone is not available for iPad. ;)

• 
  @derickal785015 күн бұрын

  M'y 309 this one at right sound exatly lire your in Black so funny.

• 
  @ElectronisoundsAudio15 күн бұрын

  Hey Hey! Thanks for watching! 😁🙏👊

• 
  @he-man-music17 күн бұрын

  You are awesome Dean ❤

• 
  @ElectronisoundsAudio17 күн бұрын

  Thanks for the support! I made this one specifically to be super inspiring and really easy to use! 😁🙏👊

• 
  @westerncivilization17 күн бұрын

  Why doesn't the Cyber6 ever show up ? Anywhere? Ever? It had real potential.

• 
  @westerncivilization17 күн бұрын

  you bought the same 309 (silver face) that i was bidding on. Glad to see it here.

• 
  @ElectronisoundsAudio17 күн бұрын

  I think that was a midi controller/sequencer only? Not a Rompler or synthesizer? 👊

• 
  @ElectronisoundsAudio17 күн бұрын

  @@westerncivilization I've see a few others like mine up for auction over the years. They are still out there! 👊

• 
  @travisbenjaminsimpson18 күн бұрын

  This sounds totally rad! Love the clarity and richness of the sounds. ✨❤️✨👌 beautiful track man! ✨💯💯

• 
  @ElectronisoundsAudio18 күн бұрын

  Thanks so much, Travis! Really appreciate it! 😁🙏👊

• 
  @user-erkk18 күн бұрын

  please tell me the eventide h9 application. it is found inside the AUM application. or buy it separately?

• 
  @ElectronisoundsAudio18 күн бұрын

  All Eventide FX apps are separate. Just go to the App store and search for Eventide. 👊

• 
  @djgalactic19 күн бұрын

  💥💥💥

• 
  @ElectronisoundsAudio19 күн бұрын

  Thanks for the support! Appreciate it! 😁🙏👊

• 
  @edgardvera313220 күн бұрын

  Love it !

• 
  @ElectronisoundsAudio19 күн бұрын

  Hey Hey! Thanks for taking the time to check this out! 😁🙏👊

• 
  @RobbieHogg121 күн бұрын

  Super nice work mate. Nicely done. 👍

• 
  @ElectronisoundsAudio21 күн бұрын

  Thanks for taking the time to check this out, Mate! Appreciate the support! 😁🙏👊

• 
  @r.b.643221 күн бұрын

  fire

• 
  @ElectronisoundsAudio21 күн бұрын

  Appreciate the support! THANKS! 😁🙏👊

• 
  @TristanBaldi21 күн бұрын

  Nice track!

• 
  @ElectronisoundsAudio21 күн бұрын

  Thanks - That means a lot coming from you, Mate! Big Ups! 😁🙏👊

• 
  @discophone_621422 күн бұрын

  Really nice mood on this! Great work!

• 
  @ElectronisoundsAudio22 күн бұрын

  Thank you! Appreciate the support! 😁🙏👊

• 
  @SonicVibe22 күн бұрын

  🔥

• 
  @ElectronisoundsAudio22 күн бұрын

  Thanks for taking the time to check this out! Big Ups! 😁🙏👊

• 
  @ZackGeragosian22 күн бұрын

  Awesome song Dean! Have you been enjoying the m8 v2?

• 
  @ElectronisoundsAudio22 күн бұрын

  Hey Hey! Thanks for taking the time to check this out! 😁🙏👊 Yes, the V2 is very nice - my first takeaway was just how much heavier it is that I expected - this thing is a TANK!!

• 
  @russ888922 күн бұрын

  A craftsman of all his tools is Dean

• 
  @ElectronisoundsAudio22 күн бұрын

  Thanks for the kind words, Russ! Big Ups! 😁🙏👊

• 
  @calumrobertson147925 күн бұрын

  Randomly browisng analog gear and this video comes up, luckily I'm a fan of dub techno, this is a jam brother!! Love from Melbourne

• 
  @ElectronisoundsAudio24 күн бұрын

  Hey Hey! Thanks for the support! Big Ups! 😁🙏👊

• 
  @tonymarinelli747025 күн бұрын

  You have such a great vibe with your approach to your modular process. Really enjoying your content.

• 
  @ElectronisoundsAudio25 күн бұрын

  Thanks very much for the kind words! Big Ups! 😁🙏👊

• 
  @GabeChurray25 күн бұрын

  This is very helpful. Really dig your presentation style too. Thank you.

• 
  @ElectronisoundsAudio25 күн бұрын

  Hey Hey! Thanks for the kind words - Big Ups! 😁🙏👊

• 
  @Astro_Creep198126 күн бұрын

  mate your a legend

• 
  @ElectronisoundsAudio25 күн бұрын

  Big Ups! Thanks for the support! 😁🙏👊

• 
  @BrianLife26 күн бұрын

  You tha man! THANKS FOR THE BANKS

• 
  @ElectronisoundsAudio26 күн бұрын

  Big Ups! I hope you get a lot of fresh inspiration from the sounds! 😁🙏👊

• 
  @BrianLife26 күн бұрын

  @@ElectronisoundsAudio thanks man. I use to Go in, with BeatMaker 2 on my iPhone and really go deep. Also I knew it inside and out. I just Recently/Finally got a iPad so I look forward to this! Thanks so much!

• 
  @BrianLife26 күн бұрын

  Robbin Banks! ;) 🏦

• 
  @squarelanguage27 күн бұрын

  Thanks for the walkthrough, are you planning on getting the Tracker+?

• 
  @ElectronisoundsAudio27 күн бұрын

  Hey Hey! Thanks for watching! 😁🙏👊 Yes, I did get the Tracker Plus. I'll be making sound banks for it as well. Here's a link to the first track I made with it: kzread.info/dash/bejne/Y4qZo7OplK64ito.htmlsi=Iszv5kpiUT0-Xl_i

• 
  @squarelanguage27 күн бұрын

  @@ElectronisoundsAudio Awesome, the new internal synths sound great

• 
  @pianissimo36927 күн бұрын

  Im a pianist and have just paid for logic pro for ipad and then discovered to my horror that the piano sounds are all awful! Im a newbie so this has thrown me but i think this app might be the solution! I want to use the free felt pianos in pianobook...amazing sounds. Ive already exported my piano track in midi format into logic... So id just need to download the sample with audioshare app and then open it with audio layer? Sorry if thats a daft question 🙏

• 
  @ElectronisoundsAudio27 күн бұрын

  Sorry, I'm not sure what format those pianos are in so I'm not sure how easy they will be to load into Audiolayer. I'm also not using Logic, but it should work with Logic. GOOD LUCK!! 😁🙏👊

• 
  @pianissimo36927 күн бұрын

  @@ElectronisoundsAudio They sample all the notes in WAV generally

• 
  @ElectronisoundsAudio27 күн бұрын

  @@pianissimo369 Sure, but the manual re-mapping of all the multi-samples in this would take foreverrrrrrrr..... 😵😵

• 
  @bexiexz28 күн бұрын

  soo brilliant wow

• 
  @ElectronisoundsAudio27 күн бұрын

  Thank you for the kind words! Big Ups! 😁🙏👊

• 
  @bexiexz27 күн бұрын

  @@ElectronisoundsAudio :)

• 
  @prestonhart668528 күн бұрын

  Damn...these slap

• 
  @ElectronisoundsAudio28 күн бұрын

  Appreciate that! Thanks for taking the time to check it out! 😁🙏👊

• 
  @DJBre28 күн бұрын

  Beautiful tutorial, I got mine last night and having a blast!

• 
  @ElectronisoundsAudio28 күн бұрын

  Hey Hey! Thanks for watching! 😁🙏👊

• 
  @travisbenjaminsimpson29 күн бұрын

  Beautiful melody and lead line ❤️✨❤️✨ that beat is slamming too. Dope! 🔥🔥

• 
  @ElectronisoundsAudio29 күн бұрын

  Appreciate the support! Thanks Travis! 😁👊

• 
  @travisbenjaminsimpson29 күн бұрын

  🔥🔥🕺🕺🔥🔥 banging DnB grooves and sweet vocals! Awesome energy and so smooth ❤️🔥✨💯✨ sick track!

• 
  @ElectronisoundsAudio29 күн бұрын

  Appreciate you checking it out, Travis! Big Ups! 😁👊

• 
  @LoSham29 күн бұрын

  Hey thanks for the patches and videos. I was wondering if you knew if it’s possible to midi map the mute buttons on the tracks of the mixer? I see the mute option in the midi focus actions but it’s unclear what “mute” it’s referring to and it does nothing for me when I map it to a button or pad.

• 
  @ElectronisoundsAudio29 күн бұрын

  There is no "global midi map" in BM3. It's a shame. That's why I used to use a ONE BANK WORKFLOW, so I can map stuff still. I think this video explains it, maybe, it's been years so I'm not sure anymore: kzread.info/dash/bejne/moN12duChrnQqdY.htmlsi=Izd6hxvGVTHWmnYb

• 
  @LoSham29 күн бұрын

  @@ElectronisoundsAudio oh I see now. I was even trying to just map my midi fighter to BM3 and using macros to flick volumes to no volume and then full volume for a mute effect but the banks issue stands in the way like you said. If you map a button to select bank and a button right next to that on the controller to move fader it might work but that’s just asking way too much. That of course would be specifically to write the automation or else pad trigger would work just fine for performance alone.

• 
  @ElectronisoundsAudio29 күн бұрын

  @@LoSham Yeah, GLOBAL Midi Mapping would have made this DAW unstoppable, imho - without it, it's strangely limited still. 👍👍

• 
  @LoSham26 күн бұрын

  @@ElectronisoundsAudio on a side note I know your into those techno type sounds. I just multi sampled my MC 303 and made MPC& Maschine key groups out of it.. let me know if you could be interested in a trade.. they aren’t Anything ground breaking but some of these samples make me cry sometimes :p 10 gigs

• 
  @ElectronisoundsAudio25 күн бұрын

  @@LoSham Thanks for the offer, I just sold an MC303. 😁👊

• 
  @LoSham29 күн бұрын

  Is this the same one that is called “65 presets” for beatmaker 3? I used one of your kits a couple years ago and wanted to get that one again.

• 
  @ElectronisoundsAudio29 күн бұрын

  I think MAYBE? This is 3 years old now, so I don't remember exactly.... ;) The download link should still be active so you can grab it?

• 
  @ElectronisoundsAudio29 күн бұрын

  WAIT - no - that's from this video here: kzread.info/dash/bejne/m4iKw8-KhbHOnrA.htmlsi=Qgh9I3KYGtSmnm-b

• 
  @LoSham29 күн бұрын

  @@ElectronisoundsAudio maybe they were both merged to one pack or something because it looks like the preset names are the same but has more presets then this video shows. IDK

• 
  @ElectronisoundsAudio29 күн бұрын

  @@LoSham Read the other comment - I posted the link to that video...

• 
  @luthordubs29 күн бұрын

  So much fun in this … much respect mate

• 
  @ElectronisoundsAudio29 күн бұрын

  Hey Hey! Thanks for taking the time to check it out! Appreciate the support! 🤗😁👊

• 
  @shaneturner933629 күн бұрын

  Could you give a tutorial on how to set this whole thing up with channels an$ everything ? Thank you For the vid !

• 
  @ElectronisoundsAudio29 күн бұрын

  Sorry - this is from 2 years ago - no tutorial incoming on this setup. 👊

• 
  @shaneturner933629 күн бұрын

  Could I possibly use Korg gadget 3 sequencer on the iPad to control the dirtywave like you are here ?

• 
  @ElectronisoundsAudio29 күн бұрын

  I would imagine so! Does gadget do midi out for controlling external gear? 🤗😁👊

• 
  @MrJojoninoАй бұрын

  Just bought mine. Video helped out a shit ton

• 
  @ElectronisoundsAudioАй бұрын

  Hey Hey! Glad you found it useful! Big Ups! 😁🙏👊

• 
  @grosunАй бұрын

  it's a shame they don't allow you to set this to happen by default, but thanks for posting the workaround!

• 
  @ElectronisoundsAudioАй бұрын

  Agreed. Thanks for watching! 😁👊

• 
  @crimsonfancyАй бұрын

  For me, this is probably the best ground-up groove building demo I've watched. I picked up tons of new tricks and workflow technique with this video alone. I have the DTII but the gist of it all still applies. Thank you. 🍻

• 
  @ElectronisoundsAudioАй бұрын

  Thanks for the support and thanks for watching! Big Ups! 😁🙏👊

• 
  @psychrockvinylАй бұрын

  Great stuff man! Digging the cartoon dean haha!

• 
  @ElectronisoundsAudioАй бұрын

  Hey Hey! Thanks for taking the time to check it out! 😁🙏👊

• 
  @MichelCernevАй бұрын

  I likeit

• 
  @ElectronisoundsAudioАй бұрын

  Hey Hey! Thanks for checking this out! 😁🙏👊