Welcome to Scott's DIY channel: We do home improvement on our home; Tools, consumer products reviews and Projects. I hope you enjoy the videos and Stay tune for happen next. If you like what see please give a thumb up and subscribe.
Recently, you said it was still up but you previously had to replace it due to snow storms. Are you referring to the replacement being still up? What did you do differently to make it last? Planning to buy this one
@wolvesr4ever3813 күн бұрын
@@lucallen yes the replacement is still up
@paulhead21 күн бұрын
So regular 30w motor oil?
@wolvesr4ever3821 күн бұрын
@@paulhead non detergent 30w
@Edmundo-p9vАй бұрын
What kind of oil can i use?
@wolvesr4ever38Ай бұрын
@@Edmundo-p9v 30w non detergent
@Edmundo-p9vАй бұрын
@@wolvesr4ever38 thank you.
@pryme2013Ай бұрын
How long did this last or is it still up? I have one in the box ready to assemble
@wolvesr4ever38Ай бұрын
@@pryme2013 is still up
@pryme2013Ай бұрын
@@wolvesr4ever38 That’s fantastic. Thank you. How long was assembly?
@wolvesr4ever38Ай бұрын
@@pryme2013 now that will depend who helping.....lol
@pryme2013Ай бұрын
@@wolvesr4ever38 I’m doing mine with a friend hopefully Monday if the weather is nice
@richl9623Ай бұрын
I just bought the same model from Amazon got it today works really good I'm in Colorado so we have very dry weather. When you spoke about the shut-off valve not being automatic are you saying it'll burn out the pump or the fan? Because I was wondering can you use this unit without the pump on just to circulate air. Not sure if you're still monitoring your channel but thought I'd take a chance to see if you'd see my message. I would greatly appreciate if you might see this and pop me a message back. Thanks! By the way I got the 3100 CFM out the door with tax free shipping cost me $410.
@wolvesr4ever38Ай бұрын
Thank you for your message
@wolvesr4ever38Ай бұрын
I still use indoor and outdoor it awesome
@richl9623Ай бұрын
@@wolvesr4ever38 thank you for the reply back! What I was asking though can you run the unit just as a fan without turning the pump on?
@wolvesr4ever38Ай бұрын
You are able to just it as a fan without turning the pump on. I use it outside with a pump when I had a hose to it
@richl9623Ай бұрын
@@wolvesr4ever38 sweet! Thank you for the reply back I appreciate it very much! Hope you have an awesome weekend brother! 😊🙏🏻
@MaryMathurin-gq8siАй бұрын
What oil you use please?
@wolvesr4ever38Ай бұрын
Non detergent 30w oil
@MaryMathurin-gq8siАй бұрын
Thank you very much
@esmeraldacarrillo78422 ай бұрын
What kind of oil?
@wolvesr4ever382 ай бұрын
Non detergent 30w oil
@rodicaroman68392 ай бұрын
Thank you so very much for your excellent explanation, in special how to put the oil in.
@wolvesr4ever382 ай бұрын
I'm glad I was able to help
@rodicaroman68392 ай бұрын
@@wolvesr4ever38wishing you the very best
@danielmiller60783 ай бұрын
I am using mine to dig holes in this north carolina clay for plants and trees.
@danielmiller60783 ай бұрын
I am being redundant on my breakers, one on outlet and another on my extension cord box. Think that might be enough?
@danielmiller60783 ай бұрын
Hey I just got one of these, I received a warning about ground wire question, is it easy to open up and check it?
@lenorahammond24143 ай бұрын
what kind of oil you use
@wolvesr4ever383 ай бұрын
30 w non detergent engine oil
@jaimevillagrana88883 ай бұрын
Explain what kind of oil
@wolvesr4ever383 ай бұрын
Thirty weight automotive oil non detergent
@davelosonczy15373 ай бұрын
What kind of oil goes in there
@wolvesr4ever383 ай бұрын
30 w Non Detergent oil
@Efemhaters4 ай бұрын
Hey how’s the saw doing now a days
@wolvesr4ever384 ай бұрын
Still working so far
@Efemhaters4 ай бұрын
@@wolvesr4ever38 good to hear I just purchased one looking forward to using it
@wolvesr4ever384 ай бұрын
@@Efemhaters awesome
@davidyoung85214 ай бұрын
Great demo on how to use a drill press.
@Dave-ty2qp4 ай бұрын
Thanks for the review, and it was very informative and down to earth.
@wolvesr4ever384 ай бұрын
Thank you for checking out my video, and I'm glad to help
@lisastevens86886 ай бұрын
I have had this exact saw for years, and just recently noticed it is getting tough to pull the arm down to cut. I read I need to loosen the tension on the arm ? Do you know how to do this ?
@englishcocktail9 ай бұрын
Hi, bro. I just bought a 2800w Makute demo hammer, looking for clear instructions everywhere till I finally came across your video. It's really more useful than the manual. Should I use a 15w40 diesel engine oil? Or something below that? I can see that the video is 7 years old so hopefully you're still around 😅
@terrywasson55410 ай бұрын
Thanks this was a big help
@stefanr.349510 ай бұрын
Look at this clueless individual! :)))) The spade is for digging hard, compacted soil, not for breaking concrete!!! So weak!
@jimscanlan738511 ай бұрын
Seven years later and you’re still getting hits on this video because the included instructions are so, so bad. I couldn’t figure out how much or what type of oil to add. Several other videos show how to check and add oil, but not how much. Your video was great. I also like your simple to follow demonstration on how to use the trigger and how to load a demolition point. I’m glad I decided to research this on KZread before just jumping in the first time. And I’ll be sure to check out your other videos.
@wolvesr4ever3811 ай бұрын
I want to thank you for taking the time to check out my videos. Im glad to help you out with my video....
@diegoandresterzaga438011 ай бұрын
Wy you don't seat the pallets on concret bricks or same thing out of ground , Curios .
@accestos11 ай бұрын
This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool kzread.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.
@xrtgameryt800811 ай бұрын
Superb quality throughout, easy to assemble. I found the saw to be highly accurate and a delight to use (I am a homeowner using this saw for various projects). I attached the saw to a folding mobile stand to save space and that works great kzread.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe as well. However, you have to be sure the saw is securely locking in position before collapsing the stand. I've had many of the brands over the years and have come to point where I only buy Bosch, the extra money is a small price to pay for the quality and ease of use. Treat yourself to the best.
@pgmom9634 Жыл бұрын
Where did you get the parts to install thru wall Not enough info to get parts needed
@wolvesr4ever38 Жыл бұрын
I got the part from Home Depot
@markdury2803 Жыл бұрын
I am having a tough time getting my blade installed its almost like its binding somewhere.
@marcelinopelcastret.6558 Жыл бұрын
Gracias, me parece muy ilustrativo el vídeo.
@kimshealyn Жыл бұрын
I turned my fan over to clean it really good. Oil leaked out. If you know any answers to these questions I’d appreciate you sharing your knowledge. Can you not pay these fans down? What kind of oil do I put back in it? Where do I put the oil?
@phil3332 Жыл бұрын
YOU FORGET TO MENTION THAT YOU DON'T HAVE ANY CONTROL OF THE OIL FLOW.
@murraymetcalf-CA Жыл бұрын
Evolution now includes a water-based dust suppression system and two wheels on the bottom to be able to walk the saw along during the cut to help save your back.
@NamHoang-bh5tp Жыл бұрын
Thanks
@oscargonzalez8518 Жыл бұрын
Thanks for this real nice video,very clear to understand,I just got one of this machine from my friend and try to cut a pice a wood but do not cut complitily,i no experience with this saws.any vary tell me what I have to do to fix this problem.Thank you very much.
@wolvesr4ever38 Жыл бұрын
A little more detail would be helpful to understand how to help you thanks
@bimberman5284 Жыл бұрын
This is scheppach germany made in China?
@joemartin4184 Жыл бұрын
What is the hieght from bottom to top of awning. Looking to get this same one but need to know measurements first
@wolvesr4ever38 Жыл бұрын
The height is 12 ft
@larryclaffy1948 Жыл бұрын
That is not a spanner wrench.
@victort927 Жыл бұрын
Can a 10 or 12 inch cut a 4x4.... Or Both
@wolvesr4ever38 Жыл бұрын
Cut both
@outlet6989 Жыл бұрын
Nice tour of your plumber's tools. The wrench in the middle would be better if the head could be turned 90 degrees like the wrench on the right. That handle on the middle wrench would be prone to hitting parts of the faucet, supply lines, and the sink.
@nickdiangelo19 Жыл бұрын
You literally skipped the install.
@zmeebojazz8774 Жыл бұрын
Thanks You made it 😊so easy
@platonkavvadias8541 Жыл бұрын
Manual is terrible!
@yes-sir32492 жыл бұрын
I’ve been using mine for about 3 years and it just stopped in the middle of a job. Any ideas what it can be?
@sj6404 Жыл бұрын
Old age? For ~ $110, just buy a new one, you certainly can't fix the old one that cheap.
@sisqokid79782 жыл бұрын
Have one for a few years and so far so good.
@deannagagliano52492 жыл бұрын
I can't wait to take em down a river. They are so stable and so much fun
@wolvesr4ever382 жыл бұрын
And yes we Row,Row and Row your boat until got to the other side
@marcs39422 жыл бұрын
Hi this is Marc
@wolvesr4ever382 жыл бұрын
Hi Marc
@marcs39422 жыл бұрын
@@wolvesr4ever38 hello
@mischievousmelloandmiles2 жыл бұрын
Do you by chance know why my awning isn’t opening & closing? Anything special I have to do with it?
@mariokelly28832 жыл бұрын
what kind of oil
@joea1042 жыл бұрын
Good video, however the camera man gave me motion sickness
Пікірлер
real men don't wear sissy gloves
Recently, you said it was still up but you previously had to replace it due to snow storms. Are you referring to the replacement being still up? What did you do differently to make it last? Planning to buy this one
@@lucallen yes the replacement is still up
So regular 30w motor oil?
@@paulhead non detergent 30w
What kind of oil can i use?
@@Edmundo-p9v 30w non detergent
@@wolvesr4ever38 thank you.
How long did this last or is it still up? I have one in the box ready to assemble
@@pryme2013 is still up
@@wolvesr4ever38 That’s fantastic. Thank you. How long was assembly?
@@pryme2013 now that will depend who helping.....lol
@@wolvesr4ever38 I’m doing mine with a friend hopefully Monday if the weather is nice
I just bought the same model from Amazon got it today works really good I'm in Colorado so we have very dry weather. When you spoke about the shut-off valve not being automatic are you saying it'll burn out the pump or the fan? Because I was wondering can you use this unit without the pump on just to circulate air. Not sure if you're still monitoring your channel but thought I'd take a chance to see if you'd see my message. I would greatly appreciate if you might see this and pop me a message back. Thanks! By the way I got the 3100 CFM out the door with tax free shipping cost me $410.
Thank you for your message
I still use indoor and outdoor it awesome
@@wolvesr4ever38 thank you for the reply back! What I was asking though can you run the unit just as a fan without turning the pump on?
You are able to just it as a fan without turning the pump on. I use it outside with a pump when I had a hose to it
@@wolvesr4ever38 sweet! Thank you for the reply back I appreciate it very much! Hope you have an awesome weekend brother! 😊🙏🏻
What oil you use please?
Non detergent 30w oil
Thank you very much
What kind of oil?
Non detergent 30w oil
Thank you so very much for your excellent explanation, in special how to put the oil in.
I'm glad I was able to help
@@wolvesr4ever38wishing you the very best
I am using mine to dig holes in this north carolina clay for plants and trees.
I am being redundant on my breakers, one on outlet and another on my extension cord box. Think that might be enough?
Hey I just got one of these, I received a warning about ground wire question, is it easy to open up and check it?
what kind of oil you use
30 w non detergent engine oil
Explain what kind of oil
Thirty weight automotive oil non detergent
What kind of oil goes in there
30 w Non Detergent oil
Hey how’s the saw doing now a days
Still working so far
@@wolvesr4ever38 good to hear I just purchased one looking forward to using it
@@Efemhaters awesome
Great demo on how to use a drill press.
Thanks for the review, and it was very informative and down to earth.
Thank you for checking out my video, and I'm glad to help
I have had this exact saw for years, and just recently noticed it is getting tough to pull the arm down to cut. I read I need to loosen the tension on the arm ? Do you know how to do this ?
Hi, bro. I just bought a 2800w Makute demo hammer, looking for clear instructions everywhere till I finally came across your video. It's really more useful than the manual. Should I use a 15w40 diesel engine oil? Or something below that? I can see that the video is 7 years old so hopefully you're still around 😅
Thanks this was a big help
Look at this clueless individual! :)))) The spade is for digging hard, compacted soil, not for breaking concrete!!! So weak!
Seven years later and you’re still getting hits on this video because the included instructions are so, so bad. I couldn’t figure out how much or what type of oil to add. Several other videos show how to check and add oil, but not how much. Your video was great. I also like your simple to follow demonstration on how to use the trigger and how to load a demolition point. I’m glad I decided to research this on KZread before just jumping in the first time. And I’ll be sure to check out your other videos.
I want to thank you for taking the time to check out my videos. Im glad to help you out with my video....
Wy you don't seat the pallets on concret bricks or same thing out of ground , Curios .
This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool kzread.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.
Superb quality throughout, easy to assemble. I found the saw to be highly accurate and a delight to use (I am a homeowner using this saw for various projects). I attached the saw to a folding mobile stand to save space and that works great kzread.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe as well. However, you have to be sure the saw is securely locking in position before collapsing the stand. I've had many of the brands over the years and have come to point where I only buy Bosch, the extra money is a small price to pay for the quality and ease of use. Treat yourself to the best.
Where did you get the parts to install thru wall Not enough info to get parts needed
I got the part from Home Depot
I am having a tough time getting my blade installed its almost like its binding somewhere.
Gracias, me parece muy ilustrativo el vídeo.
I turned my fan over to clean it really good. Oil leaked out. If you know any answers to these questions I’d appreciate you sharing your knowledge. Can you not pay these fans down? What kind of oil do I put back in it? Where do I put the oil?
YOU FORGET TO MENTION THAT YOU DON'T HAVE ANY CONTROL OF THE OIL FLOW.
Evolution now includes a water-based dust suppression system and two wheels on the bottom to be able to walk the saw along during the cut to help save your back.
Thanks
Thanks for this real nice video,very clear to understand,I just got one of this machine from my friend and try to cut a pice a wood but do not cut complitily,i no experience with this saws.any vary tell me what I have to do to fix this problem.Thank you very much.
A little more detail would be helpful to understand how to help you thanks
This is scheppach germany made in China?
What is the hieght from bottom to top of awning. Looking to get this same one but need to know measurements first
The height is 12 ft
That is not a spanner wrench.
Can a 10 or 12 inch cut a 4x4.... Or Both
Cut both
Nice tour of your plumber's tools. The wrench in the middle would be better if the head could be turned 90 degrees like the wrench on the right. That handle on the middle wrench would be prone to hitting parts of the faucet, supply lines, and the sink.
You literally skipped the install.
Thanks You made it 😊so easy
Manual is terrible!
I’ve been using mine for about 3 years and it just stopped in the middle of a job. Any ideas what it can be?
Old age? For ~ $110, just buy a new one, you certainly can't fix the old one that cheap.
Have one for a few years and so far so good.
I can't wait to take em down a river. They are so stable and so much fun
And yes we Row,Row and Row your boat until got to the other side
Hi this is Marc
Hi Marc
@@wolvesr4ever38 hello
Do you by chance know why my awning isn’t opening & closing? Anything special I have to do with it?
what kind of oil
Good video, however the camera man gave me motion sickness