Bear Creek Arsenal is a bad, bad, very bad brand. Not trusting my life with that hunk.
@hillbillygaragecs29212 күн бұрын
They are not junk you buy the cheapest lower you can and build it up from their new barrel, buffer, trigger new BCG just because it said bear creek arsenal don't mean that's what it is on the inside its just cheaper to do it this way because all the Aero precision Smith and weston all the top name brands are 3 times the money and they are the same mold it's what's on the in side that counts.
@Samstrainsofcircumstances2 күн бұрын
You keep forgetting to tell them that 1/2 of that is mine.
@hillbillygaragecs29213 күн бұрын
Yes I know I put them on all the guns I buy to test run them they have been on around 40 ar so far I just hate to go out to shoot an ar15 with out anything on top of it because people will say he doesn't even have sights. 😊
@LoL-pw9ox2 күн бұрын
Lol understood
@LoL-pw9ox3 күн бұрын
Whats with ur rear iron sights ?😅 It goes behind ur red dot not in front it plus u need a riser for it cuz it sets too low
@DaysofDestruction4 күн бұрын
Thank you for making this video.👍🏾👍🏾👍🏾
@hillbillygaragecs29214 күн бұрын
My pleasure! Thanks for watching
@user-mf1gh4iy6w9 күн бұрын
Thanks for showing this. There's that Project Farm video where regular Slip2000 performed horribly from a lubrication and rust resistance perspective. I am not convinced it's worth abandoning though, the non-toxic part is important to me too - I try to limit exposure to toxic stuff and if I'm gonna be shooting my whole life, the CLP is just one way to start. I started looking into the EWL 30 for carry guns because the standard EWL seems a bit too runny for the purpose even though I have been using it. You convinced me to try the EWL 30. Thanks again!
@hillbillygaragecs29219 күн бұрын
It's the best I have found and you can tell I'm just a country boy playing with oil no science in that test but rain don't lie 3 weeks in rain but that shooter lube stage 1 the cleaner is great for getting all oil off and starting over .
@tr7von10 күн бұрын
Pof makes a hammer spring way harder hammer hit
@hillbillygaragecs292110 күн бұрын
Yes I took a smith Electric sharpener and Polished all my moving parts w9rks grate.
@tr7von6 күн бұрын
@@kikibarrios1231yea ik but the P0F hammer spring that u can use in these kinds of triggers will eliminate all light strikes vs the stock one
@Matt.e_Black11 күн бұрын
So basically run a heavy buffer and turn the gas up to make it cycle? I’m in between this trigger, the Rare Breed, or the Alamo and not sure which to choose
@hillbillygaragecs292111 күн бұрын
I like that you can switch from Simi to full Simi auto.
@Matt.e_Black11 күн бұрын
@@hillbillygaragecs2921 where did you get that trick BCG from? I haven’t seen that before and would be nice to have for gas adjustment instead of a whole new gas block
@ThatGunGuyy3 күн бұрын
ie never had an issue, put an h3 and it runs perfect, they recommend h2 or h3 buffer
@hillbillygaragecs292112 күн бұрын
They love suppressers also.
@td336513 күн бұрын
Not one ding off the plat😅
@hillbillygaragecs292113 күн бұрын
@@td3365 I was shooting the paper lol
@riccochet70413 күн бұрын
That company is complete trash. They made trash when they were Moore Machine Company, they still make trash as Bear Creek Arsenal. Couldn't pay me to put one of their pistols in my hands and fire it. I like all my digits where they are.
@Kindacutesingle14 күн бұрын
Nice new sub
@freddycardona536814 күн бұрын
Yup!!! Works just fine Sir,,👍🏼🇺🇲💯
@chrismichaels107816 күн бұрын
I am glad you had a good experience with them. Me? Not so much. Shipping the upper and the iron sights back. Front sight unable to clamp down on the rail leaving a wiggle
@Kor_tac16 күн бұрын
That is a beautiful piece you got there.
@hillbillygaragecs292116 күн бұрын
Well you never know about clones 9mm and I was checking out the new upgrade springs and rod guides 17 pound spring out of the glock 19 gen 4.
@hunterjw8816 күн бұрын
I'd hope a new perfectly clean gun with good ammo wouldn't jam if it did there's a major issue
@Samstrainsofcircumstances16 күн бұрын
Half of all of that is mine😂
@DCXkelevra16 күн бұрын
Big tough guy flexing for nobody lmao
@MeatRust8317 күн бұрын
Ok cowboy
@PierceCountyFirearms26 күн бұрын
If you have any more videos, please post. I think this and the Atrius are the only 3-position triggers on the market so far.
@hillbillygaragecs292126 күн бұрын
Yes and their is a lot of scams for these triggers at this time asking to pay with different payments be careful be for you buy from websites with no phone #'s and no address
@Matt.e_Black11 күн бұрын
@@hillbillygaragecs2921where did you purchase yours?
@kikibarrios123110 күн бұрын
@@Matt.e_Black My friend got his from GunBroker.
@Kyle3501027 күн бұрын
Triggers aren’t on the site anymore. Possibly in trouble?
@hillbillygaragecs292127 күн бұрын
Sold out !
@Liberty_7629 күн бұрын
For the love of god STOP CALLING IT FULL AUTO!!!!! SMFH!
@hillbillygaragecs292129 күн бұрын
So in video you would have myself call it a Enhance force reset trigger for faster follow up shots .
@Liberty_7629 күн бұрын
@@hillbillygaragecs2921 you also called it full auto
@Liberty_7628 күн бұрын
@@hillbillygaragecs2921 I’d have you not call it full auto! It’s a semi auto trigger. Calling it “full auto” is wrong and attracts unwanted attention. Call it what it is! FORCED RESET SMFH! I can’t believe I have to actually state this…
@hillbillygaragecs292129 күн бұрын
Has anyone seen any more videos on this trigger i cant find any
@PierceCountyFirearms26 күн бұрын
Yours is the only one. I also cannot find any about the Atrius Trigger. It is another 3-position FRT.
@hillbillygaragecs292123 күн бұрын
@@PierceCountyFirearms no just some fake websites saying they got some
@PierceCountyFirearms15 күн бұрын
@@kikibarrios1231 Thanks for the feedback and too bad your friend paid a lot of money for a trigger that does not work properly.
@PierceCountyFirearms15 күн бұрын
@@kikibarrios1231 Dang that sucks. So it's pretty much a regular FRT trigger but costs $100 more.
@PierceCountyFirearms12 күн бұрын
@@kikibarrios1231 Glad that you got it to work! I think I'll still avoid this trigger. The regular WOT trigger is still being sold and knowing me, I would break the trigger if I attempted those repairs you and your friend completed.
@LMM61529 күн бұрын
I cant lie man. This is the stupidest fucking thing i have ever heard. Someone calling a force reset a full auto. You are a stain on the gun community.
@radiolotek29 күн бұрын
Hey 🤡, it's not full auto. Stop saying that.
@hillbillygaragecs292129 күн бұрын
@@radiolotek auto froce reset how's that
@johnb47729 күн бұрын
Learn how to spell 🤡 stop saying that and get a camera that doesn’t look like it is from 2009.
@BailaforLife29 күн бұрын
What was the BCG, buffer, buffer spring, and barrel length?
@hillbillygaragecs292129 күн бұрын
Boot leg bcg .16 inch barrel. And h2 5.56 Oz buffer and mil Spec buffer spring
@PierceCountyFirearmsАй бұрын
I was going to get one but they sold out. Darn!
@hillbillygaragecs2921Ай бұрын
Didn't take long .
@CBRN-Fan-Boy28 күн бұрын
they arent sold out, you need to email them. the product was taken down off the site by their server host.
@PierceCountyFirearms28 күн бұрын
@@CBRN-Fan-Boy oh wow I didn't know that. Thank you!
@DIYAquatics929rr21 күн бұрын
Wat site??@CBRN-Fan-Boy
@XXCHICOАй бұрын
Can’t get mine to work I have a folding stock ar 15 by bear foot arms so I don’t have a buffer spring
@hillbillygaragecs2921Ай бұрын
Try different buffer weights and make sure you oil it very well let me know .
@kikibarrios123111 күн бұрын
Me and my friend were working on his and this is what I found: My friend and I figured out the issue about the Semi-auto being bad and inconsistent FRT mode (trigger not resetting unless finger pushed trigger from the back.) when I went over to have a beer with him, turns out, there is a 5/64 hex/allen set-screw inside the trigger that should be tightened 2.5 more threads inward. We disassembled it completely together. I helped that for him, he took a File and scrubbed out the Burrs of metal on the assembly. I replaced the spring on the Forced reset part of the assembly, the piece that says "Selektor" on it with a much STRONGER Everbilt screw (the 84 pack) from the local hardware store, we re-assembled the whole piece and it is as good as a 2 stage trigger now! Trigger works great! Used some Stabil CLP on it as well, no wobble no issues at all! If your trigger has any problems, do the above, do note that for some reason doing this, the trigger housing feels a bit wider than usual and will fit very snug in the lower of the AR. Lastly, an H2 buffer will do fine. No spring change needed.
@XXCHICO11 күн бұрын
@@kikibarrios1231 your a G
@kikibarrios123111 күн бұрын
@@XXCHICO That 5/64 allen set-screw is the biggest contributor to the issues, secondary are the slight metal imperfections. Me and my friend just went to a semi auto only range and the trigger is flawless unless too much downward pressure is put on the MAGAZINE only for bolt holdback and very slight reset hiccup. It’s his favorite thing now!
@XXCHICO11 күн бұрын
@@kikibarrios1231 thank u so much bro litteral god. Im going to the ranch right now see if I can situate what ya told me !
@XXCHICOАй бұрын
Can’t get mine to work js a dead trigger of full
@hillbillygaragecs2921Ай бұрын
Did you check out full video at all the things I tried to get mine running great.
@XXCHICOАй бұрын
@@hillbillygaragecs2921 I did but I have a different set up completely I have a bear foot arms folding stock I do not have a buffer tube system it’s all shortened it dose come with a m16 BCG aswell got videos all oild up completely js a dead trigger on full any advice?
@mawhdjuana7149Ай бұрын
Finally !!
@garrygrapenuts6137Ай бұрын
I’m assuming that website is legit then
@hillbillygaragecs2921Ай бұрын
Yes the address was a Jacksonville FL that is where it came from.
@garrygrapenuts6137Ай бұрын
@@hillbillygaragecs2921 dope dude thank you finally someone knows where to get one
@guitar3212Ай бұрын
Is it reliable compared to the original rarebreed FRT? Do you need to modify anything other than using the safety they provide?
@hillbillygaragecs2921Ай бұрын
Just their safety is all it works great
@HvacGuy76Ай бұрын
@guitar3212 I think the alamo trigger pbg is the better trigger of all the reset triggers.
@guitar3212Ай бұрын
@@HvacGuy76why you think that? Most reliable?
@hillbillygaragecs2921Ай бұрын
@@HvacGuy76 I only have to two the W.O.T and the new
@hillbillygaragecs2921Ай бұрын
@@HvacGuy76 I only have the 2.The original wide open trigger and the new enhanced.With , mode, fully automatic and semi.Automatic
@NatesgunstuffАй бұрын
Hey i appreciate the video review! Definitely look at getting an a2 stock ots the frt magic formula
@RonnieMcFlyАй бұрын
The fact this is the only video on it so far is concerning
@hillbillygaragecs2921Ай бұрын
Yes it's nearly $500 for a trigger I could have had it working great before video but it takes a little work to get it right .
This is the worse video talking about a new reset trigger I've ever watch.😅😅😅
@goodcitizen379Ай бұрын
Can you use a milspec safety
@hillbillygaragecs2921Ай бұрын
No it comes with one for it
@goodcitizen379Ай бұрын
@@hillbillygaragecs2921I want to buy it but I don’t want to change the safety. Shit man. How’d you even get this without the ATF kicking your door down
@marlinlane24562 ай бұрын
Ty cause i changed everything
@user-bg4mn3uv8g2 ай бұрын
Yo lo saque estuve medio día tratando de ponerlo
@hillbillygaragecs29212 ай бұрын
Yes it's hard but can be done save that money ...
@dannyfnwanny2 ай бұрын
My shifter won't go into park. 02 chevy. We'll see if that's the case. Thanks
@hillbillygaragecs29212 ай бұрын
Good luck!
@madnigerian2 ай бұрын
Nice, i have a tank break that wouldnt work, im going to try this
@hillbillygaragecs29212 ай бұрын
Did it work?
@madnigerian2 ай бұрын
@@hillbillygaragecs2921 not home yet. Will respond when I try it
@michaelprivitera60193 ай бұрын
Didn't want to comment,.... it's so peaceful 😊 But I did anyway 😅
@tribalmuseum64903 ай бұрын
This helped a lot... Saved me a lot of money.. thank you so much
@michaelprivitera60193 ай бұрын
Been turning wrenches since the 90's, so mechanically inclined. Just getting into the drag slash. Looking forward to cheats, hacks and everything between.
@fratricidefrank3 ай бұрын
Sissy boy shoulders. Back in my day, we shot with them thin metal stocks and our shoulders bleeded all day long
@hillbillygaragecs29213 ай бұрын
That's right
@fratricidefrank3 ай бұрын
@@hillbillygaragecs2921 thanks for the video though. Been looking at these for a little while. Do you think they're better than most? Or would you buy again?
@tribalmuseum64903 ай бұрын
Tha k you
@hillbillygaragecs29213 ай бұрын
Who wants to see what 338 mag will do to ar500 steel at 100 yards will it hold up or not like if you would like to see.
Пікірлер
Bear Creek Arsenal is a bad, bad, very bad brand. Not trusting my life with that hunk.
They are not junk you buy the cheapest lower you can and build it up from their new barrel, buffer, trigger new BCG just because it said bear creek arsenal don't mean that's what it is on the inside its just cheaper to do it this way because all the Aero precision Smith and weston all the top name brands are 3 times the money and they are the same mold it's what's on the in side that counts.
You keep forgetting to tell them that 1/2 of that is mine.
Yes I know I put them on all the guns I buy to test run them they have been on around 40 ar so far I just hate to go out to shoot an ar15 with out anything on top of it because people will say he doesn't even have sights. 😊
Lol understood
Whats with ur rear iron sights ?😅 It goes behind ur red dot not in front it plus u need a riser for it cuz it sets too low
Thank you for making this video.👍🏾👍🏾👍🏾
My pleasure! Thanks for watching
Thanks for showing this. There's that Project Farm video where regular Slip2000 performed horribly from a lubrication and rust resistance perspective. I am not convinced it's worth abandoning though, the non-toxic part is important to me too - I try to limit exposure to toxic stuff and if I'm gonna be shooting my whole life, the CLP is just one way to start. I started looking into the EWL 30 for carry guns because the standard EWL seems a bit too runny for the purpose even though I have been using it. You convinced me to try the EWL 30. Thanks again!
It's the best I have found and you can tell I'm just a country boy playing with oil no science in that test but rain don't lie 3 weeks in rain but that shooter lube stage 1 the cleaner is great for getting all oil off and starting over .
Pof makes a hammer spring way harder hammer hit
Yes I took a smith Electric sharpener and Polished all my moving parts w9rks grate.
@@kikibarrios1231yea ik but the P0F hammer spring that u can use in these kinds of triggers will eliminate all light strikes vs the stock one
So basically run a heavy buffer and turn the gas up to make it cycle? I’m in between this trigger, the Rare Breed, or the Alamo and not sure which to choose
I like that you can switch from Simi to full Simi auto.
@@hillbillygaragecs2921 where did you get that trick BCG from? I haven’t seen that before and would be nice to have for gas adjustment instead of a whole new gas block
ie never had an issue, put an h3 and it runs perfect, they recommend h2 or h3 buffer
They love suppressers also.
Not one ding off the plat😅
@@td3365 I was shooting the paper lol
That company is complete trash. They made trash when they were Moore Machine Company, they still make trash as Bear Creek Arsenal. Couldn't pay me to put one of their pistols in my hands and fire it. I like all my digits where they are.
Nice new sub
Yup!!! Works just fine Sir,,👍🏼🇺🇲💯
I am glad you had a good experience with them. Me? Not so much. Shipping the upper and the iron sights back. Front sight unable to clamp down on the rail leaving a wiggle
That is a beautiful piece you got there.
Well you never know about clones 9mm and I was checking out the new upgrade springs and rod guides 17 pound spring out of the glock 19 gen 4.
I'd hope a new perfectly clean gun with good ammo wouldn't jam if it did there's a major issue
Half of all of that is mine😂
Big tough guy flexing for nobody lmao
Ok cowboy
If you have any more videos, please post. I think this and the Atrius are the only 3-position triggers on the market so far.
Yes and their is a lot of scams for these triggers at this time asking to pay with different payments be careful be for you buy from websites with no phone #'s and no address
@@hillbillygaragecs2921where did you purchase yours?
@@Matt.e_Black My friend got his from GunBroker.
Triggers aren’t on the site anymore. Possibly in trouble?
Sold out !
For the love of god STOP CALLING IT FULL AUTO!!!!! SMFH!
So in video you would have myself call it a Enhance force reset trigger for faster follow up shots .
@@hillbillygaragecs2921 you also called it full auto
@@hillbillygaragecs2921 I’d have you not call it full auto! It’s a semi auto trigger. Calling it “full auto” is wrong and attracts unwanted attention. Call it what it is! FORCED RESET SMFH! I can’t believe I have to actually state this…
Has anyone seen any more videos on this trigger i cant find any
Yours is the only one. I also cannot find any about the Atrius Trigger. It is another 3-position FRT.
@@PierceCountyFirearms no just some fake websites saying they got some
@@kikibarrios1231 Thanks for the feedback and too bad your friend paid a lot of money for a trigger that does not work properly.
@@kikibarrios1231 Dang that sucks. So it's pretty much a regular FRT trigger but costs $100 more.
@@kikibarrios1231 Glad that you got it to work! I think I'll still avoid this trigger. The regular WOT trigger is still being sold and knowing me, I would break the trigger if I attempted those repairs you and your friend completed.
I cant lie man. This is the stupidest fucking thing i have ever heard. Someone calling a force reset a full auto. You are a stain on the gun community.
Hey 🤡, it's not full auto. Stop saying that.
@@radiolotek auto froce reset how's that
Learn how to spell 🤡 stop saying that and get a camera that doesn’t look like it is from 2009.
What was the BCG, buffer, buffer spring, and barrel length?
Boot leg bcg .16 inch barrel. And h2 5.56 Oz buffer and mil Spec buffer spring
I was going to get one but they sold out. Darn!
Didn't take long .
they arent sold out, you need to email them. the product was taken down off the site by their server host.
@@CBRN-Fan-Boy oh wow I didn't know that. Thank you!
Wat site??@CBRN-Fan-Boy
Can’t get mine to work I have a folding stock ar 15 by bear foot arms so I don’t have a buffer spring
Try different buffer weights and make sure you oil it very well let me know .
Me and my friend were working on his and this is what I found: My friend and I figured out the issue about the Semi-auto being bad and inconsistent FRT mode (trigger not resetting unless finger pushed trigger from the back.) when I went over to have a beer with him, turns out, there is a 5/64 hex/allen set-screw inside the trigger that should be tightened 2.5 more threads inward. We disassembled it completely together. I helped that for him, he took a File and scrubbed out the Burrs of metal on the assembly. I replaced the spring on the Forced reset part of the assembly, the piece that says "Selektor" on it with a much STRONGER Everbilt screw (the 84 pack) from the local hardware store, we re-assembled the whole piece and it is as good as a 2 stage trigger now! Trigger works great! Used some Stabil CLP on it as well, no wobble no issues at all! If your trigger has any problems, do the above, do note that for some reason doing this, the trigger housing feels a bit wider than usual and will fit very snug in the lower of the AR. Lastly, an H2 buffer will do fine. No spring change needed.
@@kikibarrios1231 your a G
@@XXCHICO That 5/64 allen set-screw is the biggest contributor to the issues, secondary are the slight metal imperfections. Me and my friend just went to a semi auto only range and the trigger is flawless unless too much downward pressure is put on the MAGAZINE only for bolt holdback and very slight reset hiccup. It’s his favorite thing now!
@@kikibarrios1231 thank u so much bro litteral god. Im going to the ranch right now see if I can situate what ya told me !
Can’t get mine to work js a dead trigger of full
Did you check out full video at all the things I tried to get mine running great.
@@hillbillygaragecs2921 I did but I have a different set up completely I have a bear foot arms folding stock I do not have a buffer tube system it’s all shortened it dose come with a m16 BCG aswell got videos all oild up completely js a dead trigger on full any advice?
Finally !!
I’m assuming that website is legit then
Yes the address was a Jacksonville FL that is where it came from.
@@hillbillygaragecs2921 dope dude thank you finally someone knows where to get one
Is it reliable compared to the original rarebreed FRT? Do you need to modify anything other than using the safety they provide?
Just their safety is all it works great
@guitar3212 I think the alamo trigger pbg is the better trigger of all the reset triggers.
@@HvacGuy76why you think that? Most reliable?
@@HvacGuy76 I only have to two the W.O.T and the new
@@HvacGuy76 I only have the 2.The original wide open trigger and the new enhanced.With , mode, fully automatic and semi.Automatic
Hey i appreciate the video review! Definitely look at getting an a2 stock ots the frt magic formula
The fact this is the only video on it so far is concerning
Yes it's nearly $500 for a trigger I could have had it working great before video but it takes a little work to get it right .
Have you looked it up on their website yet.
There's a couple more.
@@HvacGuy76 can’t seem to find them
@@RonnieMcFly kzread.infoS4e0gCrUdqw?si=OQQwl-MmNFIsuOJ9
This is the worse video talking about a new reset trigger I've ever watch.😅😅😅
Can you use a milspec safety
No it comes with one for it
@@hillbillygaragecs2921I want to buy it but I don’t want to change the safety. Shit man. How’d you even get this without the ATF kicking your door down
Ty cause i changed everything
Yo lo saque estuve medio día tratando de ponerlo
Yes it's hard but can be done save that money ...
My shifter won't go into park. 02 chevy. We'll see if that's the case. Thanks
Good luck!
Nice, i have a tank break that wouldnt work, im going to try this
Did it work?
@@hillbillygaragecs2921 not home yet. Will respond when I try it
Didn't want to comment,.... it's so peaceful 😊 But I did anyway 😅
This helped a lot... Saved me a lot of money.. thank you so much
Been turning wrenches since the 90's, so mechanically inclined. Just getting into the drag slash. Looking forward to cheats, hacks and everything between.
Sissy boy shoulders. Back in my day, we shot with them thin metal stocks and our shoulders bleeded all day long
That's right
@@hillbillygaragecs2921 thanks for the video though. Been looking at these for a little while. Do you think they're better than most? Or would you buy again?
Tha k you
Who wants to see what 338 mag will do to ar500 steel at 100 yards will it hold up or not like if you would like to see.
How is this working out for you still?
Still holding up GRATE
@@hillbillygaragecs2921 thanks for the follow up
merecdes bens cool :)