After I remove the lint, my washing machine is leaking water ! Problem comes one after another 😢
@TechMotionChannelАй бұрын
Is there a way to prevent this kind of lint buildup?
@aaadibs2 ай бұрын
Thank you for this educational video
@axelmunoz93552 ай бұрын
Hiii finally I find somebody cleanin the same machine as mine , Do you by any chance know what is the function of this yellow-orange piece on the internal border of the door ? I would really apreciate to gent any info about
@luxent2 ай бұрын
Hi sorry, I don't have the machine anymore.
@WashingMachinelover20064 ай бұрын
Great video. 🙂
@alphawong27975 ай бұрын
There is a vertical J shape duct under the heat fan to be cleaned,dont missed it,it was the most jammed part with lint
@petisuratku6 ай бұрын
There is another location for picnic..need to go further up heading to the campsite...the location is once u reach a nice cabin on your right hand side.
@theosudarja6 ай бұрын
The good old dryer which blow air outside is safer. Isn't it? Why do they circulate internal air for dryer. Which is lint heavy, air flow full of lint. It doesn't makes sense when you see how much maintenance you will need to run the dryer safer from fire hazard.
@buddysteve55439 ай бұрын
@7:12 No! Your fan blade isn't stuck! You have to turn it clock-wise to loosen it! It twists on in opposite direction than you would with a normal screw! I got mine off no problem!
@user-ct1lf3hf1v10 ай бұрын
My drying function is blowing air but it's not hot and I get a DHE error code. When I ran the troubleshooting, I was getting 28 and 228. Does that mean 28 degrees celsius and 228rpms?
@luxent10 ай бұрын
Probably the heating element or the thermostat sensor is dead. Time to order new parts from LG. They sell it as a set when I changed mine. No option to buy it separately.
@hnkparts11 ай бұрын
Great job! the demo is clear and explaining how to maintain the LG F1450DPRE is very detailed.
@mjremy2605 Жыл бұрын
The demo was very good, and detailed, thank you! Although if that is what you have to do twice a year buy another brand! I absolutely HATE this LG washer dryer combo. This is not only a ridiculous waste of time to clean, but designed horribly and a fire trap!!!! My daughter had an LG Direct Drive Washer Dryer Combo unit. It refused to wash properly, was not draining well, clothes were dirty and dryer just kept going with zero drying. I brought my tools and did major surgery on it. I opened up the whole back, top, everything. I located the housing. I saw how bad it was - completely gummed up with lint. There was no way to clean it. Just a whopping mess. I closed it up and junked it. Never again. Get two separate units. When you have a vent-less dryer, this is the problem - it is always a lint trap issue. By contrast, my LG Large Capacity Front Loading Washing Machine works flawlessly. The only 3 maintenance items are: clean out the lint trap at bottom, remove rubber gasket on door (see KZread) and clean out lint in there and bleach out any mold, and every year, open top, remove the soap dispenser housing (looks like a distributor cap) and clean it in dishwasher or with hot water to remove all caked up soap. This soap may cause a water leak with time. Over time you may need a new gasket ring for the door. That's it. Works like a horse after that.
@mjremy2605 Жыл бұрын
Never add music to any DIY, demo, tour, cooking, or wildlife video. Golden rule of film making. It hurts the ears, confuses the mind, and irritates the viewer. Nothing good comes out of it. Silence is golden. Natural sounds only.
@theosudarja6 ай бұрын
Can you press Mute on your device or lower the volume?
@papa-kt6cc Жыл бұрын
So messy. Looks like it will damage floors if u dnt hv something 2 catch the water
@luxent Жыл бұрын
Yes, recommended to do it outdoor. I do this in my wet kitchen area where the water can flow freely.
@absofsteele Жыл бұрын
Excellent share, very detailed! ❤
@randomrandomjer7372 Жыл бұрын
Coming from twitter..
@arbeentimilsina3701 Жыл бұрын
So is it better to get a normal WM rather than Washer dryer combo to avoid all these hassles?? I was stuck between SAMSUNG AI ECOBUBBLE WASHER DRYER and LG AI DD ONLY WASHER. Which should I choose?
@luxent Жыл бұрын
I replaced this with a new Toshiba combo. I use a combo because of the small space in my Apartment and also because I can so my laundry overnight in one full cycle. Not familiar with the 2 machines, pick one with good warranty support.
@ashleym2878 Жыл бұрын
Did you remove the mesh from under your fan? I've cleaned and tested everything and everything seems functional. The only thing I can think of is my fan goes but doesn't seem all that powerful I remember the fan used to sound more blowy. Would you say your fan sounds powerful? Also after a dry cycle is there usually any water left at all to drain out the bottom? Mine has a few cups worth of water
@luxent Жыл бұрын
I removed the mesh because it was getting clogged with lint. The fan will eventually wear out and slow down. You can dissamble to clean it but it's just better to order a new one. After dry cycle, there is water left in the drain capture area but not in the main drum. If you overload it (more than half the drum) then there will be some wet spots.
@ashleym2878 Жыл бұрын
@@luxent thanks for replying I'm thinking new motor it used to come good after cleaning it but not this time
@samlobel6571 Жыл бұрын
@@luxent How do you remove that mesh? I got as far as taking the top off and removing the blower fan, but I couldn't see how to remove the mesh and didn't want to disassemble without knowing, so I couldn't clean out the internals.
@TheRealEnrique1 Жыл бұрын
Can’t wait to move out and never see this washer again
@andreamadkin1290 Жыл бұрын
Thank you 🙏🏾 very much
@iskandarzulqarnain4521 Жыл бұрын
Hi sir did have video for cleaning the bottom condenser?
@luxent Жыл бұрын
Sorry, no.
@justinpruett8674 Жыл бұрын
This will also destroy an rv
@RuiSilvaPT Жыл бұрын
Many issues with these equipment’s appear after 3 to 4 years of use.The drying capabilities start to fall after some time (it is dependent on the number of times one uses the drying capabilities of the machine per year). This problem is due to several issues some of them highly critical for the machine's lifespan: 1- The two temperature sensors (at the inlet and outlet) get covered in lint through time and as such give false readings throughout the drying operation; 2- The blower's fans get covered in lint and as a result, the airflow is highly reduced. Lint also gets stuck underneath the fan housing, increasing friction and reducing RPM, which can lead to a dead motor further down the road; 3- The lint auto-clean implemented system is highly inefficient as it does not wash all of the existing lint present in the auto-clean container; 4- The flowthrough pipe apparatus consists of two pieces, one bottom non-anodized aluminum and one top thin-steel bolted cover. These are two completely inappropriate materials for this application! It's like engineers don't have a clue about galvanic action between the aluminum and steel or galvanized parts which can lead to severe corrosion (Or perhaps they do!!! - programmed obsolescence rings a bell!?!?); 5- The bottom non-anodized piece design on the fan blower is incorrectly design as it has no inclination for water drainage and as such lint gets deposited and water gets accumulated speeding up the corrosion process; 6- The paint used on both the bottom and top parts of the flowthrough pipe apparatus (inner paint) is not suited for high-temperature applications and does not protect the parts from corrosion; 7- Although there is a sealant applied between both the top and bottom parts connectivity is achieved through attached bolts and corrosion is not prevented!! The replacement of the top steel part for stainless steel or even for both parts would make this equipment have a much much higher lifespan! But, as you all know profits wouldn't be as high! I can tell you all of this because I've recently cleaned and fixed my LG washer and dryer machine. Rust was removed and heat resisting paint was applied, highly recommend do to so. Rust will definitely appear again due to galvanic corrosion, only choice is to use a less noble metal in direct contact with both metals (usually zinc is used for this type of protection), but perhaps next year when I clean it again to check it out, I will do it.
@iskandarzulqarnain4521 Жыл бұрын
I find thats your finding is all correct, 2 in 1 machine was build with unavoidable design flaw compare to seperate machine. Detergent vapour or even excessive sud will enter the dryer section which make it even worst, lack of lint filter also contribute tu burn smell during drying when the lint wrap around the heater coil. I also find the heavy corrosion on the ducting of dryer heater. It is cast aluminum, can we spray it with zinc spray to minimize the corrosion rate?
@RuiSilvaPT Жыл бұрын
@@iskandarzulqarnain4521 It can be and effectice approach to the issue.
@arbeentimilsina3701 Жыл бұрын
@@RuiSilvaPT So Is it better to get Normal Spin Dry WM in less price rather than Washer+Dryer for less hassle?
@arjan92 Жыл бұрын
Where are these two temperature sensors (at the inlet and outlet) located on a LG 2022 combo machine?
@user-ct1lf3hf1v10 ай бұрын
My drying function is blowing air but it's not hot and I get a DHE error code. When I ran the troubleshooting, I was getting 28 and 228. Does that mean 28 degrees celsius and 228rpms?
@kumarkiirran7128 Жыл бұрын
Suara Cina 😂 bodohhhhh cara ckp pun dah tahu…. Babi
@iskandarzulqarnain4521 Жыл бұрын
How long you have been using it up to this video? Does it still perform good?
@luxent Жыл бұрын
I recently sold it. Was using it for almost 6 years. Bought a new machine.
@iskandarzulqarnain4521 Жыл бұрын
@@luxent base on your experience, how it overall performance for wash and dry? Any complaint? What is your new washer dryer?
@luxent Жыл бұрын
@@iskandarzulqarnain4521 it washed and dried well. Don't overload it beyond half tub. Downside is no lint trap so had to clean the lint frequently inside. I changed to Sharp machine. Had less features I didn't really use from LG.
@iskandarzulqarnain4521 Жыл бұрын
@@luxent so how is your new sharp machine? Which model did you get? How does it perform compared to your previous lg? I was actually looking for sharp ESDK1054PMS, but could not find any review about it
@luxent Жыл бұрын
@@iskandarzulqarnain4521 Sorry, gave you the wrong info. I got a Toshiba TWD-BJ120M4M. I like it, works very well and dries well. Less drying function but it's okay as I didn't use all the fancy drying options from LG. Much more quieter compared to my LG. My old LG had too many repairs as the shock absorber, motherboard was already not working. Had it repaired and gave it to relative to use. For these type of washer/dryer machines - not recommended to use softener. It will clog up the machine eventually. Use a drying sheet instead. The dryer does a pretty good job if you dry it until 95% and don't overload. Clothes not crumpled and no need to iron.
@magnolerriccardo6840 Жыл бұрын
LG have enought room to put a removable filter in between the fan and heat elements...why not to do it??
@luxent Жыл бұрын
Not sure what is the design logic. Supposedly the lint is supposed to wash out but it doesn't happen.
@magnolerriccardo6840 Жыл бұрын
@@luxent Maybe combined machines are designed to ensure a good washout of lint in case of less frequent use or the dryer. In any case, I found the architecture of your LG really special! in fact they have eliminated the classic condenser pipe and the fan withdraws directly from the tube. even more unusual is the point where the water sprinklers act. It gives the idea of being able to wet the laundry during the drying phase.
@ronylewis0373 Жыл бұрын
🤣 🤣
@julietechotangohotelalphai1148 Жыл бұрын
Nag o ON po ba yung drain pump kapag mag dryer ka sir? Or off lang sya lage?
@luxent Жыл бұрын
The drain pump does turn on when the dryer is on.
@julietechotangohotelalphai1148 Жыл бұрын
@@luxent does it turn on and turn off or it's on all the time when drying? Sorry for the questions I'm troubleshooting my washer/dryer.
@luxent Жыл бұрын
@@julietechotangohotelalphai1148 It doesn't turn on all the time. Only when there is water in it to drain during spin and drying.
@laptoples2 жыл бұрын
Wow !!! Thanks for this video ! Just got the LG Thin Q, so I hope cleaning it is the same. Well, I didn't know that you had to get so involved as you were showing... That fire Hazzard is creepy. I'm gonna be doing that after every wash ! LOL Mine as well leave the top off ! Hahahahahahaha Geeeez... Doing the first load of laundry right now, so we'll see how it goes. Heard drying isn't that good, but we'll see...lol Really appreciate the video !!! Thank you ! :-)
@mohdzamri53762 жыл бұрын
ceo xkan hubungi pelanggan depa bnyk keja nak buat
@Zeemas2 жыл бұрын
"I don't understand" "if you don't understand why you answer?" "You the one who *call me* . Did I owe anything or what?" "Then why you want to answer this call if you don't understand?" This is the most bodoh retort I've heard all week. You are a legend man, please do more of these.
@canopyfields2 жыл бұрын
Hong gan laaaa scammer. Next time just curse at them
@canopyfields2 жыл бұрын
It would be so good to scold them and their mummy
@kenshirowong6402 жыл бұрын
Adakah syarikat telekomunikasi merahsiakan no telephone setiap customer's? Bukankah no telephone adalah satu hak peribadi customer's ?
@luxent2 жыл бұрын
Data peribadi semua telah lama terbongkar dan pangkalan data senang dibeli oleh scammer.
@LA-ly1nt2 жыл бұрын
Kerajaan maa? Sah, Cina. Slalu jgk dpt call ni. Marah sbb kene record.
@PrinceAjose2 жыл бұрын
Hello, thanks much for this video.!!!
@mkay18072 жыл бұрын
this will also work for Samsung machines btw
@alaxander2 жыл бұрын
city very very nice♥️
@AkiranoEri2 жыл бұрын
scammer modus operandi like dog shit lol good job uncle 🤣
@klukluxklan7772 жыл бұрын
Masih ramai yg miskin terutamanya golongan B40 termasuk M40..projek berbillion tetapi ada ratusan ribu org lgi yg miskin d seluruh negara.hanya golongan VVIP shja yg hidup selesa,aman dan bahagia..
@luxent2 жыл бұрын
B50 sekarang.
@haniffjunos66862 жыл бұрын
Once they called me and i asked them to say my name since i do not want to tell my ic number.. he wrongly pronounce my father name, then i asked him to spell it... And it obviously wrong spelling. After that he asked me to just ignore the call
@luxent2 жыл бұрын
Scammer who just started work
@emiistudy66782 жыл бұрын
so call sebab apa🤣🤣🤣🤣
@luxent2 жыл бұрын
Scammer nak cari makan
@khairolfadzli6232 жыл бұрын
marah dia uncle !!! lembaga hantu betul lah
@petermaz7012 жыл бұрын
Great job!
@luxent2 жыл бұрын
Thank you. Hope it helped.
@yusriusra81152 жыл бұрын
Skg dh update. Sudah pkai no ofis
@luxent2 жыл бұрын
Jika dapat panggilan dari scammer. Cakap anda akan call balik no. telepon pejabat.
@jijiejijie25002 жыл бұрын
Hello encik mula2 dia call operator yang jawab ya?mula2 call dia cakap apa
@luxent2 жыл бұрын
Biasanya mangsa akan dapat suara rakaman yang kata mangsa ada hutang/kotak di pejabat pos/ caj kad kredit. Suara rakaman akan minta mangsa tekan 1 atau 2 untuk sambung panggilan. Lepas tu scammer yang menyamar sebagai pegawai akan minta nombor IC dan nama untuk membuat penyemakkan. Di sini lah bermula skrip mereka. Scammer akan memberitahu bahawa nombor IC mangsa dihendaki polis dan mereka akan menyambung kepada pihak polis (ahli scammer kumpulan sama). Jangan layan kalau dapat panggilan sebegini. End call terus.
@jijiejijie25002 жыл бұрын
@@luxent tq info👍
@us38042 жыл бұрын
You do this every 2 month? It is not worth buying lg washer drier then..
@luxent2 жыл бұрын
Every 2-3 months. Requires less cleaning now as I noticed less lint build up inside.
@viktor86bt2 жыл бұрын
Where is the mesh/net screen located? Thanks!
@luxent2 жыл бұрын
It's right under the blower fan. You can't see it in the video because I had cut mine out.
@jacan32 жыл бұрын
@@luxent Why you had to cut it out? So basically if you still would have the mesh you wouldn't need to clean it right?
@luxent2 жыл бұрын
@@jacan3 it was torn and full of lint, so I cut it out.
@jacan32 жыл бұрын
@@luxent The video was very helpful. Thank you for sharing.
@joecox99582 жыл бұрын
all combo mfg are profiteers, combo additional cost would be $200 more they 3x it
@joecox99582 жыл бұрын
You have not shown vent channel. I guess it has no vent, thus anyway the lint will stay in, it seems to be a bad design.
@luxent2 жыл бұрын
This model doesn't have a vent channel. The blower fan is right over the drum. The connection between the fan and the drum does gather a lot of lint in it.
@mihkeltt2 жыл бұрын
Yes, some LG models have this vertical vent channel on the back connecting the bottom of the drum to the blower vent. This channel is this weirdly shaped pipe with all sorts of crevises. First time I cleaned it, it was so full of lint that barely any air got past it. Removing it was a bit tricky, but now after multiple cleans, I can do it under an hour.
Пікірлер
After I remove the lint, my washing machine is leaking water ! Problem comes one after another 😢
Is there a way to prevent this kind of lint buildup?
Thank you for this educational video
Hiii finally I find somebody cleanin the same machine as mine , Do you by any chance know what is the function of this yellow-orange piece on the internal border of the door ? I would really apreciate to gent any info about
Hi sorry, I don't have the machine anymore.
Great video. 🙂
There is a vertical J shape duct under the heat fan to be cleaned,dont missed it,it was the most jammed part with lint
There is another location for picnic..need to go further up heading to the campsite...the location is once u reach a nice cabin on your right hand side.
The good old dryer which blow air outside is safer. Isn't it? Why do they circulate internal air for dryer. Which is lint heavy, air flow full of lint. It doesn't makes sense when you see how much maintenance you will need to run the dryer safer from fire hazard.
@7:12 No! Your fan blade isn't stuck! You have to turn it clock-wise to loosen it! It twists on in opposite direction than you would with a normal screw! I got mine off no problem!
My drying function is blowing air but it's not hot and I get a DHE error code. When I ran the troubleshooting, I was getting 28 and 228. Does that mean 28 degrees celsius and 228rpms?
Probably the heating element or the thermostat sensor is dead. Time to order new parts from LG. They sell it as a set when I changed mine. No option to buy it separately.
Great job! the demo is clear and explaining how to maintain the LG F1450DPRE is very detailed.
The demo was very good, and detailed, thank you! Although if that is what you have to do twice a year buy another brand! I absolutely HATE this LG washer dryer combo. This is not only a ridiculous waste of time to clean, but designed horribly and a fire trap!!!! My daughter had an LG Direct Drive Washer Dryer Combo unit. It refused to wash properly, was not draining well, clothes were dirty and dryer just kept going with zero drying. I brought my tools and did major surgery on it. I opened up the whole back, top, everything. I located the housing. I saw how bad it was - completely gummed up with lint. There was no way to clean it. Just a whopping mess. I closed it up and junked it. Never again. Get two separate units. When you have a vent-less dryer, this is the problem - it is always a lint trap issue. By contrast, my LG Large Capacity Front Loading Washing Machine works flawlessly. The only 3 maintenance items are: clean out the lint trap at bottom, remove rubber gasket on door (see KZread) and clean out lint in there and bleach out any mold, and every year, open top, remove the soap dispenser housing (looks like a distributor cap) and clean it in dishwasher or with hot water to remove all caked up soap. This soap may cause a water leak with time. Over time you may need a new gasket ring for the door. That's it. Works like a horse after that.
Never add music to any DIY, demo, tour, cooking, or wildlife video. Golden rule of film making. It hurts the ears, confuses the mind, and irritates the viewer. Nothing good comes out of it. Silence is golden. Natural sounds only.
Can you press Mute on your device or lower the volume?
So messy. Looks like it will damage floors if u dnt hv something 2 catch the water
Yes, recommended to do it outdoor. I do this in my wet kitchen area where the water can flow freely.
Excellent share, very detailed! ❤
Coming from twitter..
So is it better to get a normal WM rather than Washer dryer combo to avoid all these hassles?? I was stuck between SAMSUNG AI ECOBUBBLE WASHER DRYER and LG AI DD ONLY WASHER. Which should I choose?
I replaced this with a new Toshiba combo. I use a combo because of the small space in my Apartment and also because I can so my laundry overnight in one full cycle. Not familiar with the 2 machines, pick one with good warranty support.
Did you remove the mesh from under your fan? I've cleaned and tested everything and everything seems functional. The only thing I can think of is my fan goes but doesn't seem all that powerful I remember the fan used to sound more blowy. Would you say your fan sounds powerful? Also after a dry cycle is there usually any water left at all to drain out the bottom? Mine has a few cups worth of water
I removed the mesh because it was getting clogged with lint. The fan will eventually wear out and slow down. You can dissamble to clean it but it's just better to order a new one. After dry cycle, there is water left in the drain capture area but not in the main drum. If you overload it (more than half the drum) then there will be some wet spots.
@@luxent thanks for replying I'm thinking new motor it used to come good after cleaning it but not this time
@@luxent How do you remove that mesh? I got as far as taking the top off and removing the blower fan, but I couldn't see how to remove the mesh and didn't want to disassemble without knowing, so I couldn't clean out the internals.
Can’t wait to move out and never see this washer again
Thank you 🙏🏾 very much
Hi sir did have video for cleaning the bottom condenser?
Sorry, no.
This will also destroy an rv
Many issues with these equipment’s appear after 3 to 4 years of use.The drying capabilities start to fall after some time (it is dependent on the number of times one uses the drying capabilities of the machine per year). This problem is due to several issues some of them highly critical for the machine's lifespan: 1- The two temperature sensors (at the inlet and outlet) get covered in lint through time and as such give false readings throughout the drying operation; 2- The blower's fans get covered in lint and as a result, the airflow is highly reduced. Lint also gets stuck underneath the fan housing, increasing friction and reducing RPM, which can lead to a dead motor further down the road; 3- The lint auto-clean implemented system is highly inefficient as it does not wash all of the existing lint present in the auto-clean container; 4- The flowthrough pipe apparatus consists of two pieces, one bottom non-anodized aluminum and one top thin-steel bolted cover. These are two completely inappropriate materials for this application! It's like engineers don't have a clue about galvanic action between the aluminum and steel or galvanized parts which can lead to severe corrosion (Or perhaps they do!!! - programmed obsolescence rings a bell!?!?); 5- The bottom non-anodized piece design on the fan blower is incorrectly design as it has no inclination for water drainage and as such lint gets deposited and water gets accumulated speeding up the corrosion process; 6- The paint used on both the bottom and top parts of the flowthrough pipe apparatus (inner paint) is not suited for high-temperature applications and does not protect the parts from corrosion; 7- Although there is a sealant applied between both the top and bottom parts connectivity is achieved through attached bolts and corrosion is not prevented!! The replacement of the top steel part for stainless steel or even for both parts would make this equipment have a much much higher lifespan! But, as you all know profits wouldn't be as high! I can tell you all of this because I've recently cleaned and fixed my LG washer and dryer machine. Rust was removed and heat resisting paint was applied, highly recommend do to so. Rust will definitely appear again due to galvanic corrosion, only choice is to use a less noble metal in direct contact with both metals (usually zinc is used for this type of protection), but perhaps next year when I clean it again to check it out, I will do it.
I find thats your finding is all correct, 2 in 1 machine was build with unavoidable design flaw compare to seperate machine. Detergent vapour or even excessive sud will enter the dryer section which make it even worst, lack of lint filter also contribute tu burn smell during drying when the lint wrap around the heater coil. I also find the heavy corrosion on the ducting of dryer heater. It is cast aluminum, can we spray it with zinc spray to minimize the corrosion rate?
@@iskandarzulqarnain4521 It can be and effectice approach to the issue.
@@RuiSilvaPT So Is it better to get Normal Spin Dry WM in less price rather than Washer+Dryer for less hassle?
Where are these two temperature sensors (at the inlet and outlet) located on a LG 2022 combo machine?
My drying function is blowing air but it's not hot and I get a DHE error code. When I ran the troubleshooting, I was getting 28 and 228. Does that mean 28 degrees celsius and 228rpms?
Suara Cina 😂 bodohhhhh cara ckp pun dah tahu…. Babi
How long you have been using it up to this video? Does it still perform good?
I recently sold it. Was using it for almost 6 years. Bought a new machine.
@@luxent base on your experience, how it overall performance for wash and dry? Any complaint? What is your new washer dryer?
@@iskandarzulqarnain4521 it washed and dried well. Don't overload it beyond half tub. Downside is no lint trap so had to clean the lint frequently inside. I changed to Sharp machine. Had less features I didn't really use from LG.
@@luxent so how is your new sharp machine? Which model did you get? How does it perform compared to your previous lg? I was actually looking for sharp ESDK1054PMS, but could not find any review about it
@@iskandarzulqarnain4521 Sorry, gave you the wrong info. I got a Toshiba TWD-BJ120M4M. I like it, works very well and dries well. Less drying function but it's okay as I didn't use all the fancy drying options from LG. Much more quieter compared to my LG. My old LG had too many repairs as the shock absorber, motherboard was already not working. Had it repaired and gave it to relative to use. For these type of washer/dryer machines - not recommended to use softener. It will clog up the machine eventually. Use a drying sheet instead. The dryer does a pretty good job if you dry it until 95% and don't overload. Clothes not crumpled and no need to iron.
LG have enought room to put a removable filter in between the fan and heat elements...why not to do it??
Not sure what is the design logic. Supposedly the lint is supposed to wash out but it doesn't happen.
@@luxent Maybe combined machines are designed to ensure a good washout of lint in case of less frequent use or the dryer. In any case, I found the architecture of your LG really special! in fact they have eliminated the classic condenser pipe and the fan withdraws directly from the tube. even more unusual is the point where the water sprinklers act. It gives the idea of being able to wet the laundry during the drying phase.
🤣 🤣
Nag o ON po ba yung drain pump kapag mag dryer ka sir? Or off lang sya lage?
The drain pump does turn on when the dryer is on.
@@luxent does it turn on and turn off or it's on all the time when drying? Sorry for the questions I'm troubleshooting my washer/dryer.
@@julietechotangohotelalphai1148 It doesn't turn on all the time. Only when there is water in it to drain during spin and drying.
Wow !!! Thanks for this video ! Just got the LG Thin Q, so I hope cleaning it is the same. Well, I didn't know that you had to get so involved as you were showing... That fire Hazzard is creepy. I'm gonna be doing that after every wash ! LOL Mine as well leave the top off ! Hahahahahahaha Geeeez... Doing the first load of laundry right now, so we'll see how it goes. Heard drying isn't that good, but we'll see...lol Really appreciate the video !!! Thank you ! :-)
ceo xkan hubungi pelanggan depa bnyk keja nak buat
"I don't understand" "if you don't understand why you answer?" "You the one who *call me* . Did I owe anything or what?" "Then why you want to answer this call if you don't understand?" This is the most bodoh retort I've heard all week. You are a legend man, please do more of these.
Hong gan laaaa scammer. Next time just curse at them
It would be so good to scold them and their mummy
Adakah syarikat telekomunikasi merahsiakan no telephone setiap customer's? Bukankah no telephone adalah satu hak peribadi customer's ?
Data peribadi semua telah lama terbongkar dan pangkalan data senang dibeli oleh scammer.
Kerajaan maa? Sah, Cina. Slalu jgk dpt call ni. Marah sbb kene record.
Hello, thanks much for this video.!!!
this will also work for Samsung machines btw
city very very nice♥️
scammer modus operandi like dog shit lol good job uncle 🤣
Masih ramai yg miskin terutamanya golongan B40 termasuk M40..projek berbillion tetapi ada ratusan ribu org lgi yg miskin d seluruh negara.hanya golongan VVIP shja yg hidup selesa,aman dan bahagia..
B50 sekarang.
Once they called me and i asked them to say my name since i do not want to tell my ic number.. he wrongly pronounce my father name, then i asked him to spell it... And it obviously wrong spelling. After that he asked me to just ignore the call
Scammer who just started work
so call sebab apa🤣🤣🤣🤣
Scammer nak cari makan
marah dia uncle !!! lembaga hantu betul lah
Great job!
Thank you. Hope it helped.
Skg dh update. Sudah pkai no ofis
Jika dapat panggilan dari scammer. Cakap anda akan call balik no. telepon pejabat.
Hello encik mula2 dia call operator yang jawab ya?mula2 call dia cakap apa
Biasanya mangsa akan dapat suara rakaman yang kata mangsa ada hutang/kotak di pejabat pos/ caj kad kredit. Suara rakaman akan minta mangsa tekan 1 atau 2 untuk sambung panggilan. Lepas tu scammer yang menyamar sebagai pegawai akan minta nombor IC dan nama untuk membuat penyemakkan. Di sini lah bermula skrip mereka. Scammer akan memberitahu bahawa nombor IC mangsa dihendaki polis dan mereka akan menyambung kepada pihak polis (ahli scammer kumpulan sama). Jangan layan kalau dapat panggilan sebegini. End call terus.
@@luxent tq info👍
You do this every 2 month? It is not worth buying lg washer drier then..
Every 2-3 months. Requires less cleaning now as I noticed less lint build up inside.
Where is the mesh/net screen located? Thanks!
It's right under the blower fan. You can't see it in the video because I had cut mine out.
@@luxent Why you had to cut it out? So basically if you still would have the mesh you wouldn't need to clean it right?
@@jacan3 it was torn and full of lint, so I cut it out.
@@luxent The video was very helpful. Thank you for sharing.
all combo mfg are profiteers, combo additional cost would be $200 more they 3x it
You have not shown vent channel. I guess it has no vent, thus anyway the lint will stay in, it seems to be a bad design.
This model doesn't have a vent channel. The blower fan is right over the drum. The connection between the fan and the drum does gather a lot of lint in it.
Yes, some LG models have this vertical vent channel on the back connecting the bottom of the drum to the blower vent. This channel is this weirdly shaped pipe with all sorts of crevises. First time I cleaned it, it was so full of lint that barely any air got past it. Removing it was a bit tricky, but now after multiple cleans, I can do it under an hour.