It's important to keep in mind that, starting the water flow before you start the engine could result in that water flowing into the engine combustion chamber through the exhaust. Once you're done flushing, always turn the water off first. Stop making jet ski videos.
@irenefox17712 күн бұрын
I only start mine in the water. Seadoo bombadier millennium addition
@All-Miles-Matter13 күн бұрын
Damn bro ......comments should tell you everything
@abdiazizelmi591314 күн бұрын
I hope you can record or help us to mention all
@oneinthesac22 күн бұрын
Lol #1 gonna push water into engine #2 its made in japan there are no bald eagles under the hood SMH
@tomnguyen691723 күн бұрын
Engine on, water on , water off, engine off. Protect your badass machine, brother.
@Kirmo13Ай бұрын
how lippin cringe the first thing you do after spending big bucks on a Japanese jet ski is to say it smells american?!
@comitivaquebraqueixo3125Ай бұрын
Good way to lost a engine...
@thejasonstackhouseАй бұрын
Lol this is awesome, dude floods his brand new ski lol
@luisnegron9673Ай бұрын
That Jetski is done water is pouring out the bottom and engine is of that ski is done
@EverythingsFine82Ай бұрын
Nice ski. Be sure to start it before turning on the water to prevent hydrolocking the engine.
@danielseverino8491Ай бұрын
Like this, you will have ski for a couple days only
@jeremieguioby6753Ай бұрын
Toujours démarrer avant d allumer l eau
@Aaron-zl5gqАй бұрын
wtf why is the water on before you start the engine clearly you don’t read the manual ……
@benitomojarro31342 ай бұрын
Did u put a paper gasket between compresor and block
@exploreflorida53032 ай бұрын
this is why you dont buy a used jet ski.
@godlycat48192 ай бұрын
“Smells like pure American freedom”
@Spyke-lz2hl2 ай бұрын
Hilarious that they’re talking about American power while revving a Japanese pwc.
@EverythingsFine82Ай бұрын
Yamaha makes their Waverunners in the state of Georgia
@thedailyruns60463 ай бұрын
But its japanese?
@MrTk69693 ай бұрын
Yeah that's the first time I've ever heard of Japanese item being refer to as pure American freedom
@Jacob.Lucero3 ай бұрын
Engine needs to be running before the water is on!
@instrumentalbeats8053 ай бұрын
Flooding tge engine then revving it while cold lol
@StarWarNerd4 ай бұрын
Picked up 24 Vx took it to break in for about two hours , when I head back in , while in idle white smoke was coming from bottom back of the ski, is that normal for break in ?
@epf49904 ай бұрын
Owned & been riding all kinds of skis for 25 years. In my opinion Don’t flush start that thing unless you absolutely need too like after riding in salt. Turn water on then start right away, don’t let that water run long before starting. Fun machine, enjoy it!
@NARDHQ4 ай бұрын
dont buy used
@aldainsmith18664 ай бұрын
Where can i get the filter wrench or the part number
@Florida_Living14 ай бұрын
Scary that people are buying these expensive new machines without the most basic understanding of how to operate them. Please DO NOT have water running to your ski while the engine is off. Great way to hydrolock your new toy in a hurry.
@colt22065 ай бұрын
You changed filter and put that dirty contaminated fuel right back in? I don’t think it’s supposed to be green like that 😂
@colt22065 ай бұрын
I am no diesel mechanic but I think the green algae is kind of a bad sign
@rootbeer55395 ай бұрын
Good video 👍👍
@user-tj5po7vv7e5 ай бұрын
Thank you your video was helpful
@gnomechild32485 ай бұрын
LMAO that motor doesnt sound too good after you flooded it🤣🤣
@ianevans35256 ай бұрын
Smells like pure American stupidity
@user-mt2yh7zz6r6 ай бұрын
Smells like pure American freedom he said..
@alex1242416 ай бұрын
Cringe
@Talk2theMike7476 ай бұрын
May I ask, who is "we". Are you runnin team❓
@richj53827 ай бұрын
And you just ruined it
@elias-zb4zs7 ай бұрын
”Pure american freedom” sir, its a yamaha
@laithmusa7984 ай бұрын
That’s made in the states
@Rangertex2.34 ай бұрын
Made in Georgia. 🇺🇸
@Gunzavage3 ай бұрын
Bro really thought he said something smart 🥴 Yamaha was made in America
@elias-zb4zs3 ай бұрын
@@Gunzavage yamaha is japanese
@Gunzavage3 ай бұрын
@@elias-zb4zs Yamaha jet skis are made in America, do your research kid.
@vinceking78787 ай бұрын
What is everyone on about with the water? Water goes in the coolant channels in the block like a car right? Or is it strain with water in the jet? Why is the jet spinning, doesn’t it have neutral when you Rev it? How much can you rev a jet ski like this with this particular jet ski(wave runner)? Never had a jet ski.
@kodisantos17968 ай бұрын
Bro gotta start machine before running water 💧
@Sirpaparazzi19908 ай бұрын
RIP engine
@user-we6xh4dz4t9 ай бұрын
If you don’t have a clue what you are doing, stop making videos.
@PopeyeFPV9 ай бұрын
You might want to delete this video bro…..
@mrcasanova197019 ай бұрын
Your motor is ruined 😅
@chriswilliams7799 ай бұрын
How to hydrolock your engine
@MrTk69693 ай бұрын
How exactly is he going to hydro lock his engine
@joesautospa57362 ай бұрын
@@MrTk6969 by leaving the water running with the engine off. Literally the first thing the dealer tells you to do is start the engine then the water.
@terrenceduffy75019 ай бұрын
It’s good practice to turn the water on after u start the machine i work at a Yamaha dealer and we’re advised to start the machine for 15 seconds and then turn the water on
@joeyheins88564 ай бұрын
Im working at Yamaha, and i can confirm 🫱🏽🫲🏼
@gerodevans254110 ай бұрын
When I turn plastic nut on bottom whole bag keeps kinking up should I loosen both bolts while bags are still inflated ? Need help
@morellilogistics655210 ай бұрын
Great informative video. Thanks!
@bsblgray474111 ай бұрын
Bros going to vapor lock it
@wynnloftis36511 ай бұрын
It ain't no pressure washer dude! Start engine BEFORE you run water thru it!
Пікірлер
It's important to keep in mind that, starting the water flow before you start the engine could result in that water flowing into the engine combustion chamber through the exhaust. Once you're done flushing, always turn the water off first. Stop making jet ski videos.
I only start mine in the water. Seadoo bombadier millennium addition
Damn bro ......comments should tell you everything
I hope you can record or help us to mention all
Lol #1 gonna push water into engine #2 its made in japan there are no bald eagles under the hood SMH
Engine on, water on , water off, engine off. Protect your badass machine, brother.
how lippin cringe the first thing you do after spending big bucks on a Japanese jet ski is to say it smells american?!
Good way to lost a engine...
Lol this is awesome, dude floods his brand new ski lol
That Jetski is done water is pouring out the bottom and engine is of that ski is done
Nice ski. Be sure to start it before turning on the water to prevent hydrolocking the engine.
Like this, you will have ski for a couple days only
Toujours démarrer avant d allumer l eau
wtf why is the water on before you start the engine clearly you don’t read the manual ……
Did u put a paper gasket between compresor and block
this is why you dont buy a used jet ski.
“Smells like pure American freedom”
Hilarious that they’re talking about American power while revving a Japanese pwc.
Yamaha makes their Waverunners in the state of Georgia
But its japanese?
Yeah that's the first time I've ever heard of Japanese item being refer to as pure American freedom
Engine needs to be running before the water is on!
Flooding tge engine then revving it while cold lol
Picked up 24 Vx took it to break in for about two hours , when I head back in , while in idle white smoke was coming from bottom back of the ski, is that normal for break in ?
Owned & been riding all kinds of skis for 25 years. In my opinion Don’t flush start that thing unless you absolutely need too like after riding in salt. Turn water on then start right away, don’t let that water run long before starting. Fun machine, enjoy it!
dont buy used
Where can i get the filter wrench or the part number
Scary that people are buying these expensive new machines without the most basic understanding of how to operate them. Please DO NOT have water running to your ski while the engine is off. Great way to hydrolock your new toy in a hurry.
You changed filter and put that dirty contaminated fuel right back in? I don’t think it’s supposed to be green like that 😂
I am no diesel mechanic but I think the green algae is kind of a bad sign
Good video 👍👍
Thank you your video was helpful
LMAO that motor doesnt sound too good after you flooded it🤣🤣
Smells like pure American stupidity
Smells like pure American freedom he said..
Cringe
May I ask, who is "we". Are you runnin team❓
And you just ruined it
”Pure american freedom” sir, its a yamaha
That’s made in the states
Made in Georgia. 🇺🇸
Bro really thought he said something smart 🥴 Yamaha was made in America
@@Gunzavage yamaha is japanese
@@elias-zb4zs Yamaha jet skis are made in America, do your research kid.
What is everyone on about with the water? Water goes in the coolant channels in the block like a car right? Or is it strain with water in the jet? Why is the jet spinning, doesn’t it have neutral when you Rev it? How much can you rev a jet ski like this with this particular jet ski(wave runner)? Never had a jet ski.
Bro gotta start machine before running water 💧
RIP engine
If you don’t have a clue what you are doing, stop making videos.
You might want to delete this video bro…..
Your motor is ruined 😅
How to hydrolock your engine
How exactly is he going to hydro lock his engine
@@MrTk6969 by leaving the water running with the engine off. Literally the first thing the dealer tells you to do is start the engine then the water.
It’s good practice to turn the water on after u start the machine i work at a Yamaha dealer and we’re advised to start the machine for 15 seconds and then turn the water on
Im working at Yamaha, and i can confirm 🫱🏽🫲🏼
When I turn plastic nut on bottom whole bag keeps kinking up should I loosen both bolts while bags are still inflated ? Need help
Great informative video. Thanks!
Bros going to vapor lock it
It ain't no pressure washer dude! Start engine BEFORE you run water thru it!