Пікірлер

• 
  @lindacook891Күн бұрын

  Nice JD you got there!

• 
  @PK-rt4sl2 күн бұрын

  Did you had to do indexing on the bulbs for the low beam also?

• 
  @mustangecoboosthpp3869Күн бұрын

  Yes the bulbs are indexed, the instructions are clear and tell you the bulb needs to be installed. It is very easy to do.

• 
  @MAGR19942 күн бұрын

  I bought a 2022 Sr access with 5k miles a month ago. So far I’ve added the tail gate defender, the OEM black tail pipe, rough country seat covers, center cubby organizer, husky weather mats, blacked out toyota emblem in the steering wheel, booster and air compressor, 2022 trd off road wheels and tires (used from a buddies Tacoma), and 20% tint. Very happy with it so far. Next on my list are the soft roll tonneau, bed mat, fog lights and ditch lights. Maybe running boards after that.

• 
  @MAGR19942 күн бұрын

  What running board are those?

• 
  @mustangecoboosthpp38692 күн бұрын

  I purchased my running boards from Summit racing, these are Raptor running boards. They are very high quality but a word about running boards, if I had it to do over I would have purchased a set with a step instead, the reason is the cab is not tall and this style running board puts you so far up that you have to relearn how to get in and out with this style running board. The ones with a step that is a little lower on the running board would make entry and exit a little easier. Having said that I do not regret purchasing the Raptor running boards because they are a quality product that will last the life of the truck. I have adjusted how I get in and exit the cab and I have no desire to replace these running boards. I am happy with them.

• 
  @Bluv5088 күн бұрын

  Great video and thanks for the tip on drilling the 5th wheel to fit the pin.. How long are these trailers (BJ and Smokey)

• 
  @mustangecoboosthpp38697 күн бұрын

  This trailer is 30.31 inches long.

• 
  @mustangecoboosthpp38697 күн бұрын

  The BJ and the Bear I think was 28 inches long.

• 
  @Bluv5088 күн бұрын

  Thanks for this video you have a great collection!

• 
  @kyledanger459 күн бұрын

  Interesting about being torqued wrong from factory. In the comment section of another video a guy said he check his himself, he said it seems like they were more at 25 then 41. I had mine done and they said it was fine, but now the thumping that I heard and felt when breaking is gone, so that tells me they weren't at proper torque. What frustrating is that I have taken this truck in 3 times for scheduled service, and each time I told them I can hear and feel a thump coming from the rear when I break, they did nothing about it.

• 
  @darrenstretch226 күн бұрын

  Once again thanks for the video..

• 
  @keith-kessinger29 күн бұрын

  Soo coool!

• 
  @instantwagnerАй бұрын

  After 9 months do you still recommend these tires?

• 
  @mustangecoboosthpp3869Ай бұрын

  Tires are very good, I would buy them again. No issues with them they handle good on both dry and wet pavement. The are not noisy, the tread is quiet on the road.

• 
  @codysuther8789Ай бұрын

  Great video. Helped me determine if the SR was compatible!

• 
  @mustangecoboosthpp3869Ай бұрын

  Glad it helped you.

• 
  @frigglebiscuit7484Ай бұрын

  just bought the new harbor freight balancer, its got a black base and is 99$. pittsburgh brand. its super nice, just like yours.

• 
  @almarkowbenderАй бұрын

  You boomers will always find a way to waste money. Youre lucky you were born into a time of excess, you wouldnt survive being young today.

• 
  @haynbongАй бұрын

  Sold 👏Mahalo😎🤙

• 
  @AndiceRupenАй бұрын

  Work like a charm!

• 
  @BurghratАй бұрын

  Beware of these covers if you intend to own your truck for an extended period of time. I put one on my 2017 Honda Ridgeline shortly after I bought the truck. After six years the rubber seals between the panels began to deteriorate and tear. I called the manufacturer to buy replacement seals for the panels and they told me they do not sell the seals but would happily sell me a new cover with a discount. Horrible customer service and just plain terrible business practices. I would not recommend these covers explicitly because of the problem and the customer service

• 
  @josephpizzi7505Ай бұрын

  Do they offer the exhaust tip in black or just chrome ?

• 
  @mustangecoboosthpp3869Ай бұрын

  They also have the exhaust tip in black.

• 
  @Byu50Ай бұрын

  Thanks for posting this. Very helpful info on battery issue. I might have to keep checking on the battery life more often. I will charge it when it’s half full.

• 
  @ImStillLookingАй бұрын

  Couldn't figure out where to hook them. Thank you.

• 
  @toddfowler4017Ай бұрын

  Harry was my favorite driver too‼️And he always will be‼️ I hope he gets a chance to see your work, I'm sure he'd be tickled! Thanks for never forgetting "The Bandit"‼️‼️ I've been shouting from the mountaintops to anyone who would listen, put Harry in The Hall Of Fame while he, his wonderful family, and legions of fans can still enjoy it ‼️‼️ Let's face it, without Harry in The Hall Of Fame, it's really The Hall Of Shame ‼️33/7🇺🇸🏁

• 
  @gaelewis6623Ай бұрын

  Dose this work on a diesel with 2 batteries?

• 
  @mustangecoboosthpp3869Ай бұрын

  you would need to disconnect both batteries, depending on the year and manufacture how they store the permanent codes this may work and it may not work. If they are storing the code by writing to memory then you will have to use a computer to erase it, if it is stored in flash memory that requires power they it should erase the code. Like anything else some manufactures make it as hard as possible to erase these codes. One other thing is the problem has to be corrected before erasing the code or the code will still show up.

• 
  @nastysoda9212Ай бұрын

  thank you very much!

• 
  @leothalion3983Ай бұрын

  What are the bolts used

• 
  @mustangecoboosthpp3869Ай бұрын

  You can purchase them at hobby shops, they are used for radio controlled airplanes and such. They work fine for this application. You can also go to Home Depot or Lowe's or ACE Hardware and buy something similar.

• 
  @Benedictus.E.S.Ай бұрын

  Dari sewaktu kecil pengen punya, smape sekarang tidak tercapai..

• 
  @sinamardani8771Ай бұрын

  I’m sorry this does not work. I did it on a 2020 mustang exactly like u said and it die NOT work

• 
  @tdog8507Ай бұрын

  Good info. Doesn't seem like a bid deal.

• 
  @edlyli7166Ай бұрын

  For a new trucks it has a lot of problems

• 
  @davidniehoff4267Ай бұрын

  People always forget about his late model career. Jack Ingram got in the hall based on his late model career.

• 
  @davidniehoff4267Ай бұрын

  Damn straight!

• 
  @Dave23-242 ай бұрын

  Good video

• 
  @edmunch95352 ай бұрын

  Every nut needs pulled and inspected under nut for slag. This is way you don’t go by KZread for professional issues. Take it to your dealer! You run the risk of catastrophic failure.

• 
  @JoeKubinecАй бұрын

  Pull and replace one nut at a time. Do not remove all at one time.

• 
  @chagemeister42852 ай бұрын

  Thank you

• 
  @Lifekeepgoing772 ай бұрын

  What percentage tint to match?

• 
  @mustangecoboosthpp38692 ай бұрын

  I went with legal tint on the front windows following Florida law, it is very close to the factory tint but maybe a little lighter.

• 
  @justinsnyder68812 ай бұрын

  Also have to check the stud for welding splatter and the stud would be replaced if the stud has splatter. If there is splatter under the nut. It gets filed and the nut is replaced with a new nut. A second visit is required for the stud replacement. They mark it with a paint pen and order parts. Its a big job if studs have to get replaced. Its a quick in and out if its just the inspection, slag removal and nut replaced.

• 
  @thelion98632 ай бұрын

  Before I buy the switch and the lights. Do I need to buy another relay. I open it already to check it. It has 2 blue relay there.

• 
  @mustangecoboosthpp38692 ай бұрын

  No relays needed, this is all plug and play, the wiring hardness is already being the plate, just install the switch and plug in the harness.

• 
  @dnineteen16472 ай бұрын

  Thanks for the info. Short, sweet, and to the point!

• 
  @270eman2 ай бұрын

  They said mine was good to go. I inspected them myself and never saw any signs of spatter and nothing was loose.

• 
  @Nightowl-OO2 ай бұрын

  Best explanation to date! More plausible that a combination of slag and under torquing the nuts. I agree with you on using med thread locker. After torquing the nut you can always mark the nut with a sharpie and see if any of the nuts loosen

• 
  @flightmedic71692 ай бұрын

  Codes are on the setting in the device

• 
  @madgingercustoms2 ай бұрын

  Glad that helped.

• 
  @nebaldeby53692 ай бұрын

  Just stumbled upon your channel. I see your handle relates to a Ford product. You should be driving a Ranger, you wouldn't be having these issues, lol. I love my '21 Ranger!...Just kidding, thanks for the information on the Tacomas and good luck to you

• 
  @MrWilson1012 ай бұрын

  I know that torque wrench cost 🤑🤑🤑

• 
  @Jaredius2 ай бұрын

  41ft/lb

• 
  @mustangecoboosthpp38692 ай бұрын

  I did a second video after getting information that came from the actual recall procedure and the recall procedure calls for 41 ft lbs of torque. See the second video to what to look for when you remove each nut one at a time and if weld splatter is found under a nut what to do.

• 
  @JoeKubinecАй бұрын

  @@mustangecoboosthpp3869 Some are saying that the primary reason for the recall was to get the nuts torqued to the proper (41ft-lb) value and the slag inspection was a ruse. IDK what to think anymore.

• 
  @mustangecoboosthpp3869Ай бұрын

  @@JoeKubinec I think the torque spec was the bigger issue, Toyota upped the torque spec quite a bit.

• 
  @javioperez69962 ай бұрын

  Hi, where did you buy the step bars? Or running boards

• 
  @mustangecoboosthpp38692 ай бұрын

  They were purchased from Summit Racing, they are Raptor series running boards.

• 
  @Jaredius2 ай бұрын

  I just did mine today and all 8 were fine. However, I did fine a spatter of weld slag near one bolt on the driver side…the bottom bolt closest to the front of the truck, but it did not affect the seating of the bolt. It took me about 30min. I used 41ft/lb and blue lock tite per your recommendation…thank you!

• 
  @mustangecoboosthpp38692 ай бұрын

  Glad you had no issues, now you don't have to worry about it any further.

• 
  @jakemillson71902 ай бұрын

  Hahaha you don’t need lock tight.

• 
  @mustangecoboosthpp38692 ай бұрын

  Does not hurt to use loctite, these nuts are not a locknut style nut and they do not use a lock washer so to be safe loctite is a good idea.

• 
  @nastysoda9212Ай бұрын

  @@mustangecoboosthpp3869 if you were my mechanic, I would be very appreciative of you using blue loctite, thank you

• 
  @janpur14172 ай бұрын

  Toyota started lying big time recently. They bring in the 2025 landcruiser prado to the USA and call it just landcruiser 250 and inflate the price by $10K for the same truck sold elsewhere in the world.

• 
  @bob40032 ай бұрын

  I tried that 2x , code still there

• 
  @MavRick692 ай бұрын

  What are the torque specs for pre 2022-23 models?

• 
  @mustangecoboosthpp38692 ай бұрын

  According to a Toyota mechanic their shop manual says 33 ft lbs of torque, but again the recall procedure from Toyota is calling for 41 ft lbs of torque. The rear axles are the same on the pre third gen 2022/2023 models so that is why I think Toyota was under torquing these nuts. If you have a pre 2022/2023 model I would not worry about them.

• 
  @ralphr92182 ай бұрын

  You're on top of your game. Good job!