Пікірлер

• 
  @SakibAhsanTamim-k7l23 сағат бұрын

  Hi, I am Sakib. I saw that you are very serious about KZread, But cannot growing the channel. So, I analyzed your channel and saw that In your channel have many problem. If you can solve your videos will get more engagement. If you can give me permission I can tell these problems. . Are you allowed? Waiting for a approve to tell to you!.. Are you? Hope you are if you want to know. here or email? I am anywhere and How are you? I am good here? email? ig?~~~~~~~~~~~~```````__)((**&^%#@!!

• 
  @huntysadventures740817 күн бұрын

  Mate spot looks amazing 😮

• 
  @morethanaproject85622 күн бұрын

  Good video man, it helped me a lot 🙏🏼

• 
  @fftcdragonboy799925 күн бұрын

  omg finny I found a dc to dc in the bin working and I tryed to fine if u can do this but failed so sat in my 4wd draw and just found your video and now I finny got use for it thanks so much ❤

• 
  @luisgarage877325 күн бұрын

  @@fftcdragonboy7999 glad i could help

• 
  @fftcdragonboy799925 күн бұрын

  ​@luisgarage8773 so use thay low amp charger dose the dc to dc charger boost up to 40ah if your dc to dc is that

• 
  @luisgarage877325 күн бұрын

  @@fftcdragonboy7999 yeh the laptop charger acts like a solar panel and feeds it with 19v, the dcdc charger will then regulate it to the correct amp and voltage to charge the battery

• 
  @fftcdragonboy799925 күн бұрын

  @@luisgarage8773 awesome thanks

• 
  @leonardovillalba881Ай бұрын

  Thank you fella I just got a lift kit done in my jeep and I was going crazy when the light pop out on the dash It took me 7 minutes to fix it and the help of my 95 years old grandma to check the steering wheel

• 
  @thereddragonslair9548Ай бұрын

  Thank you, sir, my 2013 Jeep Wrangler JK has a very very slight steering wheel misalignment but a year or so ago I replaced a wheel bearing and was thinking it was that because of the traction control light.. So I will be checking into this to see if it corrects it! Again, thank you !!🎉

• 
  @squizzyt8698Ай бұрын

  love the jeep and the video - thanks for sharing!

• 
  @JackwDyles-zu3jt2 ай бұрын

  Thinks for the video on the JK. I'm going to try this and see if it takes care of my problem. I've got a 2013 Jeep wrangler sport ok.

• 
  @claudiagamino64993 ай бұрын

  I get the same exact problem on my 2014 jk. After installing 4inch lift, now steering wheel is really crooked🤦🏼‍♂️

• 
  @adrianblade50153 ай бұрын

  It's sad that the dealership would charge you thousands for ten minutes of work with parts that cost 60 bucks. Also keep your vehicle overnight so it doesn't seem like they robbed you

• 
  @lluis93773 ай бұрын

  Thank you so much!!

• 
  @Bk47overland3 ай бұрын

  Did you have to do an airvent for the watertank?

• 
  @luisgarage87733 ай бұрын

  No air vent needed, i just leave the lid undone enough to get air into it

• 
  @BlackShadow2333 ай бұрын

  Should show us how you set this up

• 
  @luisgarage877328 күн бұрын

  There's a video on my channel about it

• 
  @jamesfxd3 ай бұрын

  Just the video I was looking for! Thanks Lui. Very informative.

• 
  @Piratepeteoo3 ай бұрын

  Ive got the same problem with mine can you please send the link please mate im in south Australia 🇦🇺

• 
  @gunztommiegunz3 ай бұрын

  Hey man, I know it’s been about a year since you made this video but I just replaced all the tie rods on my jeep and eyeballed them and reinstalled them and it’s Easter Sunday so not an alignment shop is open. Thank God you make KZread videos brother you will get me to work tomorrow morning. I might’ve been able to figure this out by myself because I was an alignment technician about 20 years ago so I remember. that tells you that even us mechanics go online looking for help I’m a mechanized heavy equipment mechanic and I will be getting to work tomorrow because of your content. I can’t tell you how much that means to me. I hope you have a blessed weekend a blessed day, a blessed year and an absolutely blessed life, sir thank you for all you have done I was shaking when I drove down the road and I felt all that going on with my vehicle.

• 
  @luisgarage87733 ай бұрын

  Thats awesome, glad I could help 👍

• 
  @rydersandoval-th5qu4 ай бұрын

  Well done sir thank you for sharing this information great work

• 
  @user-nu5mg5is2k5 ай бұрын

  Thanks can’t wait to try this tomorrow.

• 
  @gunztommiegunz3 ай бұрын

  It works. It absolutely works. I just did it. I’m in my car. Pulling into my garage right now. I gotta adjust it. Slightly back a little bit the other way but we’re good. I can get to work tomorrow because of this gentleman.

• 
  @gilbertandcharisevlogs5 ай бұрын

  how to change time to 12H? mine is on military time. thanks

• 
  @paidasumankumar5 ай бұрын

  thank you for showing in simple way.. quick question how many inch that BAR LIGHT. thats so impressive way you organised

• 
  @jonathonbrisbane23507 ай бұрын

  Awesome work mate, subscribed for the great detail

• 
  @luisgarage87737 ай бұрын

  Thanks a lot

• 
  @jackojacko35457 ай бұрын

  Geday Lui great job the electrical work looks first class ,i will have to get a sparky to do mine im just not that talented. Dose that tank fit in with the rear seats still in place ????? You did say you can did you test fit Kind regards

• 
  @luisgarage87737 ай бұрын

  Thanks, the tank does fit with the seats in. Also check out my other videos about how to make the electrical part, its very easy.

• 
  @MrCorsaestrema8 ай бұрын

  It is a great set-up, wonderful job! The frontrunner model does not fit on the jeep wrangler 2013 (3rd generation). What is your wrangler year and what is the water tank model have you used, please?

• 
  @luisgarage87738 ай бұрын

  Mine is a 2007, the tank is a Boab, It fits perfectly. I've heard the front runner ones don't fit as good

• 
  @mikimiki1959 ай бұрын

  This is exactly the same issue. I’m having with my Jeep all other video have issue with ABS I don’t have ABS light I only have traction control light My steering wheel is just as bad as your steering wheel Thanks I will try this tomorrow 👍🏻

• 
  @ofermorag10 ай бұрын

  Congrats on a wonderful build. I’m researching a water tank for a Jeep Gladiator. When you’re driving do you notice any water sloshing sounds coming from the tank? Thank you

• 
  @luisgarage877310 ай бұрын

  No I've never noticed any sounds, the material is very thick and i have the platform covering it

• 
  @brodyhall11 ай бұрын

  Great set-up! Very detailed video, too. It helped me out a lot.

• 
  @luisgarage877311 ай бұрын

  Glad it helped you 👍

• 
  @avjeeper700611 ай бұрын

  Thanks for the video instruction. Do you have a video for how you installed the light bar?

• 
  @luisgarage877311 ай бұрын

  Thanks, unfortunately i didn't make a video of the ligh bar but i might make one

• 
  @m3rdpwr Жыл бұрын

  I just started having this issue on the front on my 2014 ram 1500. After seeing this video, I jacked up the front end wiggled the air connections back and forth several times. After driving it around a while, it fixed the problem after being broken for a week. I'm sure the nitrogen has already leaked out of the system, but it seems to be functioning again. The system kept flashing a message that the motor was overheating and it needed to cool down. So hopefully the motor didn't suffer long-term damage.

• 
  @TheDesertegal7 Жыл бұрын

  are you free to select the sensor reading you want? for example my car OBD provides transmission temp sensor, can i add it to the display? does it reads the list of sensors your car having then you can select from it?

• 
  @luisgarage8773 Жыл бұрын

  You can add many different sensors to the display but for some reason they did not include trans temp, but they did include cvt temp.

• 
  @TheDesertegal7 Жыл бұрын

  @@luisgarage8773 thankx mate for the response 🤝

• 
  @drock179 Жыл бұрын

  Geez’

• 
  @JB-qd6xb Жыл бұрын

  Have a question to change those elbow valve, we have to turn the car off or just put it on park mood? Thank you

• 
  @marks2551 Жыл бұрын

  Your Jeep looks great can I ask what size wheel tyre combo you are running ? Thanks

• 
  @RCandFishing Жыл бұрын

  What wheel and tire setup are you running? Is there any rubbing is issues? And, do you have airlinks lift kit?

• 
  @dalejustins7117 Жыл бұрын

  Exactly as the man described, great video and I can here to work out how to remove the clip off the back of the accelerator cable. The only issue with the install is the terrible stick on the back of the controlller, doesn’t stick to anything from the very first minute of install. So need to go get some 3M double sided. Pathetic. The performance of the unit itself, very good bang for buck.

• 
  @iramo1461 Жыл бұрын

  From Buffalo NY, Good stuff Mate. 👍👍👍

• 
  @TheOnlyonejeep Жыл бұрын

  about to buy mine on amazon quicker deliver take note ebay sells one that has white tips do your research i think that is a different. local dealer quoted 4k to 20k to repair no joke lol

• 
  @terrabestdoron4512 Жыл бұрын

  i mean the valve thanks

• 
  @terrabestdoron4512 Жыл бұрын

  hi thanks we hold GC 2013 overland I am trying to locate the catalog number of the item and its exact name in order to purchase and I would be happy for help on the matter

• 
  @quincybirwood2629 Жыл бұрын

  You SHOULD worry about air being in they system. Nitrogen doesn't allow water to enter the closed system. Moisture is the cause of failure for many air suspensions. Also, nitrogen molecules are larger than air molecules making it harder for them to leak out. Finally, nitrogen is not affected by temperature changes. When air gets cold the pressure decreases so your suspension filled with air will sag in cold temperatures. This is why Jeep designed and filled the quadra-lift system with nitrogen in the first place; for better, longer lasting performance at a wider range of temperatures. When you fix your leak have the system topped up with nitrogen. Low levels of nitrogen will lead to your system not being able achieve the highest ground clearance.

• 
  @aigarskarklins29496 ай бұрын

  Exactly. Wise words. Thanks.

• 
  @worldwide2020 Жыл бұрын

  You ate the best

• 
  @thad1au Жыл бұрын

  Thanks for posting this video - 2012 Overland 5.7 in Victoria, fixed in 5 minutes!

• 
  @johanbester4484 Жыл бұрын

  Well done. Have a 2016 3.0l diesel Overland...will order these parts now and keep it till the time I have the issue. Thanks so much

• 
  @off-roadnpew2183 Жыл бұрын

  Man I’m so aggravated with my 2012. It’s been in the shop 3 times in 2 years

• 
  @fbgwedgie Жыл бұрын

  Any options if this fix doesn’t work?

• 
  @aieshaharris53402 жыл бұрын

  Will this issue causes the Jeep to go dead while driving?

• 
  @Peter-xtreme2 жыл бұрын

  Thanks for the video, as you say, very easy installation, especially after watching this video. Looking forward to your other servicing videos.

• 
  @PCPAyLOAD2 жыл бұрын

  Lift kit. Problem solved.

• 
  @slepper982 жыл бұрын

  Good video thanks for the info. Best wishes.

• 
  @abronsandifer40322 жыл бұрын

  My jeep overland was sitting on all four wheels replaced the valves on front struts reset system and now after about 3 hours rear now sitting on tires and front stays up

• 
  @ICM0n3y2 жыл бұрын

  What is the name of the parts to order??