Пікірлер

• 
  @jorgeromero-nm2fk2 күн бұрын

  I’m not mechannicly inclined but with your video I just changed my air filter !!!!! Thank you

• 
  @MattonEverything6000Күн бұрын

  So glad to have been able to help!

• 
  @jorgeromero-nm2fkКүн бұрын

  @@MattonEverything6000 how about helping me to change the gas filter in my 2016 jetta s 1.4???

• 
  @MattonEverything600013 сағат бұрын

  @@jorgeromero-nm2fk I would love to help but I’m afraid I don’t have that car anymore :(

• 
  @FranciscoParra-du1dc7 күн бұрын

  I figured out how to grind fine for espresso by finding a KZread video. Y took off the hopper and the small screw won’t hold anymore. No idea how it was in place before. I wonder if there was an extra piece, like an anchor to make it hold.

• 
  @stephengardner418913 күн бұрын

  We got the 2018 2.0T with a 6speed mt last fall with 35K miles on it, It did need a new radar unit, that the dealer replaced at no extra cost, and we love it. A new radar would cost about $1K to replace so don't bump it or plow snow with it. The negatives are all the same except for the braking error. Haven't seen that one yet. The collision avoidance error is annoying and so far it reboots when you turn off the car and restart it but it's better than it not working when you really need it. It seems to have something to do with the Lane Change Assist system. It doesn't like it when you change lanes without using the directional even when you are all alone on the highway.

• 
  @ukaszfurmaniak155521 күн бұрын

  Thanks!

• 
  @JohnColeman-ul5rj23 күн бұрын

  I find the manual as very anemic compared to my SRT4, which is more raw and has much better feedback feel.

• 
  @FranciscoParra-du1dc29 күн бұрын

  I just got mine. UPS was supposed to deliver it from 1:00 pm to 5:00 pm and didn’t. We waited and left by 5 because we had things to do. They left a not saying the would deliver it at 7:00 pm next day. We had to be gone even earlier than 7:00 pm. I had to pay extra for UPS to hold it at one of their locations. So far the grinder is not grinding as fine as I need. Maybe it needs time to adjust. Who knows. My cheap grinder (Crux) grinds finer so far. Wish me luck, or I will wish me luck anyway. $300+☹️

• 
  @MattonEverything600027 күн бұрын

  Not grinding fine enough to get your espresso dialled in?

• 
  @hazelleah2422Ай бұрын

  Thanks so much for the video, made changing my wipers a breeze 😊

• 
  @user-he5qy6pu8hАй бұрын

  Buy a Tesla pussy

• 
  @irvinghenriquez8231Ай бұрын

  Just got mine but the fork was impossible to pop in. It just jams and it feels like I'm going to snap it. Pretty shoddy design tbh

• 
  @MattonEverything6000Ай бұрын

  That’s too bad :( I’d honestly return it / get the fork replaced under warranty. It should slip in pretty easily.

• 
  @irvinghenriquez8231Ай бұрын

  @@MattonEverything6000 I luckily got it in after reaching out to customer service. It was honestly so lucky lol after almost an hour trying. It's like the coffee gods were just toying with me

• 
  @solitaryman2008Ай бұрын

  Thanks for the post. Very helpful.

• 
  @WyeReveryАй бұрын

  Excellent, thank you.

• 
  @GruchKilla773 ай бұрын

  Remove wheels too so it won't roll away

• 
  @emrecandan7993 ай бұрын

  Hello Matt, In order to grind Turkish coffee which number is best? Thank you very much

• 
  @johhnny3004 ай бұрын

  I did it with your help. Thank you! Great video by the way good instructions.

• 
  @joelreyes83125 ай бұрын

  Bros complaining ab 26 mpg while driving spiritedly💀

• 
  @robertthomas60435 ай бұрын

  I think u did a great job. Though I'm worried of over spray and would of used cardboard, drop clothes and a bunch to cover up the door, deck and surrounding areas.

• 
  @gabrielc3445 ай бұрын

  Thank you for the super simple explanation. Got my K&N installed. Set it and forget it.

• 
  @Hawaii13135 ай бұрын

  PEACE&LUV

• 
  @tommontoya70605 ай бұрын

  I have always activated my yeast according to yeast manufacturer instructions. Is there a difference if you sprinkle it on?

• 
  @sheldonk19545 ай бұрын

  Was at the dealer today. They wanted $85 to change it out during the oil service. With this video, it only cost us $20. Thank you so much.

• 
  @jstemmlerbass5 ай бұрын

  I appreciate you getting right to the point and being concise. Many other tutorials are unnecessarily long winded. Cheers

• 
  @seancarmody31345 ай бұрын

  I have a 2020 accord sport 6 speed cv2, that i bought used through Vroom with 6k miles on it in 2022 and i have added the PRL stage 2 intake, deleted the resonator and mufflers and i have had 0 issues with my car and currently have 19k plus miles on it and i have NEVER had any of these issues with my car.

• 
  @TaraPickensakaPickTara6 ай бұрын

  Thank you for making this. I also appreciate all the comments!

• 
  @-Arkelon6 ай бұрын

  My dream car shift!

• 
  @cruzreyes8326 ай бұрын

  Every issue you named.... I dont have 😂 The leg resting on the center console... Mines padded ? 🤔 A tank of fuel will last me almost 2 weeks 🤔 The TPMS thing for sure is irritating, its always on 😭

• 
  @MattonEverything60006 ай бұрын

  I think certain trims have a padded center console. Thanks for the comment!

• 
  @galenwhite87656 ай бұрын

  It looks like the video is cut off at the beginning. It starts directly at "4th I have a brush". What are we missing for the first 3 items?

• 
  @MikhailJohnson19806 ай бұрын

  Flash your computer..sounds like issues are software related. The gas tank issue is a huge one. Great video

• 
  @alaynacowden83387 ай бұрын

  This was incredible. You got every camera shot! Thanks!!

• 
  @MG73168 ай бұрын

  Check your battery voltage for the mitigation system low battery voltage will trigger it.

• 
  @ryanperreault48488 ай бұрын

  Greta video and thank you, I dropped you a sub

• 
  @jameslarson65558 ай бұрын

  You really need to unscrew the end caps off the brush bar and clean them out. If your bar was that dirty, you will be amazed what’s in the end caps. When they get plugged, the bar won’t spin.

• 
  @Sunshine66Bklyn2 ай бұрын

  My brush was clean and it still won’t spin. I took off the end caps as you suggested and found the hairy problem. Thank you for this comment. Otherwise I would not have known. Thank you Sir. 🙏

• 
  @MRamin988 ай бұрын

  I just got 250k on my 2018 accord 2.ot.....🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

• 
  @subaruwrx2348 ай бұрын

  Don't forget to check if your winter tires are directional - there should be an arrow pointing in the direction of rotation

• 
  @MattonEverything60008 ай бұрын

  Good callout

• 
  @DavidBelliveau9 ай бұрын

  Don't bother watching this. He doesn't record the next step(s). He should delete it if he isn't going to record steps 2, 3, 4, etc.

• 
  @bradleyniblock25969 ай бұрын

  $50 replacement on top of the oil change. Bought the filter for $28 using a coupon from the dealership. Saved $22 for 15 minutes work. And I’m sure it’ll take 5 next time. Thanks$$$

• 
  @calvinjonesyoutube10 ай бұрын

  This is a pretty decent guide. One important thing you missed was wiping down the surfaces with methylated spirits or cellulose thinners. Getting any grease of smooth metal is really important. Also, lots of people use all in one paint/primers and thats completely fine but if you want it to last, not just look good, you need to build up the thickness of the paint, this decreases the amount of moisture and oxygen that gets through the paint film to the metal in order to start rust. You can also use a primer high in zinc if you want to increase the time untill repaint. A couple of coats of rust inhibiting paint/primer is a good basic spec, if you want a long lasting system then it would be zinc primer, two coats of micaceous iron oxide and one of of metal gloss...that should last 15 years or so. Also wire brushes are probably better on your angle grinder than sand paper.

• 
  @theamazingempiricist10 ай бұрын

  One of those hose clamps was EXTREMELY finicky

• 
  @jwong6010 ай бұрын

  I have a 2014 Accord V6 with absolutely no problems. Tend to stay away from turbos.

• 
  @jameslund22110 ай бұрын

  No primer?

• 
  @jameslund22110 ай бұрын

  What about a needle gun scaler?

• 
  @Ravenzoom10 ай бұрын

  Can you move this snowblower backwards and forward when the engine is off? Or do you always need to start the engine to move it?

• 
  @GabiHeinz11 ай бұрын

  this is a perfect video. thank you mate

• 
  @ajplummer600611 ай бұрын

  This is just how you change a tire in general

• 
  @MattonEverything600011 ай бұрын

  You're not wrong

• 
  @CarlosAugusto-li8dl11 ай бұрын

  Nice video.

• 
  @caballodeacero3052 Жыл бұрын

  Gracias

• 
  @thedosh100 Жыл бұрын

  what do you do if you have holes in rod iron fence?

• 
  @MattonEverything6000 Жыл бұрын

  If you’ve got holes in your wrought iron fence, you’d likely need to weld in some new material.

• 
  @simp-slayer Жыл бұрын

  Brother, position your prompter to where your camera is or just show other footage with voiceover. Currently, it looks like someone made you read an essay at gunpoint.

• 
  @MattonEverything6000 Жыл бұрын

  Appreciate the feedback haha

• 
  @ts89540 Жыл бұрын

  It would have taken me 33hrs to figure this out. Thanks!

• 
  @steveperreault Жыл бұрын

  Thanks for the video. I watched it then changed the filter. Money saved!

• 
  @93455Driver Жыл бұрын

  Watching a few tire videos, a few seem to have jack stands as a safety measure, good idea?

• 
  @MattonEverything600011 ай бұрын

  Never hurts. If you're going under the vehicle at all, it's an absolute must.