anyone know if this works with a Caddex vista and goggles integra?
@santoniorobinson35352 күн бұрын
Dont forget about the cetus x
@SwiftstriderQT3 күн бұрын
This work find for my WTFos DJI goggles V2 just put SD card in goggles it unlock then i turn off and took card out and change to 1.2k then i did with 2 of my drones vista and dji air unit i plug it into dji air unit via SD slot and turn on left for few then took it out for the vista i plug it into my PC and drag the file onto it and that was it Pretty easy and simple no issues
@mariusztv43393 күн бұрын
awesome video! greetings from Poland :)
@Lancacee6 күн бұрын
Price is always changing. The actual quilty is proofed by testing.
@AlguemTOTALMENTEsemsussidade7 күн бұрын
I’ve unfortunately never seen any of your videos before. You seem like a nice guy and it’s really unfortunate that you’re not posting anymore… I hope you are doing well wherever you are
@dalbertsalcie63347 күн бұрын
What if my glasses are diversity? What channel should I leave it on?
@user-ll9xu1fx6g8 күн бұрын
Try the Ender V3 KE. My one prints at 300mm a second no problem and at its top speed, the boat takes like 16 minutes.
@vikas46858 күн бұрын
Where did matt go... Is he the person who's dropping bombs in Russia using FPV😅😂
@Rogel32958 күн бұрын
Excellent work, Excellent video, I also have my channel about FPV DRONE
@wzthshaahhshbdvdjrg8 күн бұрын
how much range do you usually get with it? i have it and can barely make it about 50 meters without it losing signal.
@KannaKamui9 күн бұрын
In blatant digs, it's a bambu A1 copycat, it gets about 70% there but falls flat on some of the ease of use, and on some of the design quality; which is important for better quality when mixed with speed. Also please stop touching your print bed.. skin oils wreck adhesion of first layer at modern first layer speeds.
@Mr_leen44611 күн бұрын
This is what actually got me into 3d printing This got my hype up and got an ankermake m5c, which was not a mistake and at the end of the day I thank this man
@canadiangemstones763612 күн бұрын
Test is flawed. Blue skies make better vid, have to test in the same conditions.
@CourtJ_ml9to13 күн бұрын
Are u still printing??
@havocproltd13 күн бұрын
damn! i think im gonna get one just to make that usb flash drive / card holder!!!
@kingtom643314 күн бұрын
2024 update please?
@DronesOverMelbourne15 күн бұрын
I got the original ended 3 and it didn’t even come with instructions 😂
@user-xs1yu8fy5c16 күн бұрын
The DJI fpv drone is a great drone and I've liked it very much but it comes with a software glitch in the controller and the drone will fly away the glitch is in the controller it's a software issue by the factory they don't test them but you can get it tested I suggest testing it before you fly this drone it will fly away
@Krash_fpv16 күн бұрын
The vista sits at 25 mw until armed
@mikepatton869118 күн бұрын
Hey Matt, I love your videos. They present all the information you need in a thorough manner but also easily understandable. However these videos are years old at this point, any chance you could do an updated series on FPV drones and the related gear with more up to date options? Either way you a new fan. Thanks for making these.
@nrich512718 күн бұрын
I got an Ender 3 Pro with 5 rolls of filament for free but I knew nothing about 3D printing. There's a lot to learn but with the help of KZread videos I was able to learn the in's and outs. The advice I have for novices is consider getting a filament drier or making one . I bought a cheap 2 roll dehumidifier and I find I have eliminated so many issues and better / more consistent prints. Also I researched and now understand what the correct first level thickness should look like after bed leveling and then I use a CHEP Bed Leveling Test Print to fine tune and it has been a game changer for me. Also adding "mouse ears" to a difficult print in order to maintain adhesion is a game changer.
@AZ-su1xt19 күн бұрын
❤
@MANZY-cp3ls19 күн бұрын
why does the links take me to google news?
@DaeDexShadowHeart20 күн бұрын
Be teal careful in the States if you are not licensed you can not accept any kind of payment, not even food or lodging or any kind of exchange of goods.
@mrkanoot21 күн бұрын
does this 3d printer print pc fillaments?
@sealofthesea523321 күн бұрын
The Ankermake can do 500 mm/s2, while a Creality K1 series can do up to 600 mm/s2, while also having the AI Camera on the K1C and Max, and being an Optional add on on the base K1, and being enclosed and with other features.
@humbertocortes6821 күн бұрын
Can you share me the rates for interior flying?thx in advance
@javiernunez749022 күн бұрын
Can i use tx16s and dji o3 google on this?
@RobertKelly-it8wm22 күн бұрын
Yes , it is😊
@sohelmahamudhridoy461823 күн бұрын
sir is it okay to buy a used fpv controller. if it is okay then which thing i should consider before buying it. love you great content sir. love from Bangladesh
@yoeycrack124 күн бұрын
The anwser is easy what need you have to build to what you need long range fast w.e
@mehmetagir24 күн бұрын
Nobody tells us how to fly straight...when ı go straight, the aircraft make wave with ascent and descent
@yoeycrack124 күн бұрын
Why the F would I want a Wireless charge for my Cell Phone Im just getting into the Hobby RN and bet you $100 bucks that I can Find something that does the same thing for half the price THIS IS BS
@mistergamerguy26 күн бұрын
Would this be a good 1st printer? I'm impressed by how it's built.
@nexus609027 күн бұрын
Hey! Just wanted to give a quick warning. When you touch the build plate (as you did a few times in this video) it can screw with the bed adhesion for a print unless you clean it.
@NDEDANDEDA27 күн бұрын
fantastic this drone!! i want to learn for drive in acro mode and i would record some videos in waterfalls this is the perfect drone..
@sohelmahamudhridoy461828 күн бұрын
learn something new thank you sir. great video. But it is too old can you make some sort of video like this with more details
@sohelmahamudhridoy461828 күн бұрын
awesome fpv collection sir, love you from Bangladesh
@Wasp40029 күн бұрын
Come back on KZread buddy
@WINTERTIGER-ng3lpАй бұрын
Does the 80 dollar one come with goggles and controller
@TheRaccoonFPV23 күн бұрын
Ni
@realninjawatcherАй бұрын
Would you suggest the Tango 2 controller with this model?
@Zionson1Ай бұрын
Hey bro. Than the heavens i found you again. You did an episode about finding the right channel for your fpv. Everytime i get up in the air, i lose signal. How do i fix this? I am a newb. I have a rekon 5 long range(analog) with a radioking open tx transmitter and an Eachine 800DM. Can you help me with this please🙏🏿🙏🏿?
@Hadeshinai1Ай бұрын
if the same battery management logic applies to li-po powerbanks that are used for smartphones etc. does that mean when im not using it too much i should leave a charge of abt ~20%? as well
@Mrcharliecog23Ай бұрын
bambu lab a1
@ThomasReinermallorcaАй бұрын
It is very bad practice to work for free, you destroy the market with this and people what live from this have peoblems selling there services
@abelo6727Ай бұрын
Sim is a must and a RC controller is another thing you must buy. I got a Frsky used for 40€. I first started with a PS4 controller and when I got the RC I had to learn from the begging. It is completely different way to do it. Get a controller and sim asap if you want the real experience.
@tirednes584Ай бұрын
i love fresyle i realy do but the way you talked about the mobula just makes me want to fly it so much cant wait to get one
@ThePooTubeChannelАй бұрын
He literally copied short circuits Ai camera part word for word
Пікірлер
anyone know if this works with a Caddex vista and goggles integra?
Dont forget about the cetus x
This work find for my WTFos DJI goggles V2 just put SD card in goggles it unlock then i turn off and took card out and change to 1.2k then i did with 2 of my drones vista and dji air unit i plug it into dji air unit via SD slot and turn on left for few then took it out for the vista i plug it into my PC and drag the file onto it and that was it Pretty easy and simple no issues
awesome video! greetings from Poland :)
Price is always changing. The actual quilty is proofed by testing.
I’ve unfortunately never seen any of your videos before. You seem like a nice guy and it’s really unfortunate that you’re not posting anymore… I hope you are doing well wherever you are
What if my glasses are diversity? What channel should I leave it on?
Try the Ender V3 KE. My one prints at 300mm a second no problem and at its top speed, the boat takes like 16 minutes.
Where did matt go... Is he the person who's dropping bombs in Russia using FPV😅😂
Excellent work, Excellent video, I also have my channel about FPV DRONE
how much range do you usually get with it? i have it and can barely make it about 50 meters without it losing signal.
In blatant digs, it's a bambu A1 copycat, it gets about 70% there but falls flat on some of the ease of use, and on some of the design quality; which is important for better quality when mixed with speed. Also please stop touching your print bed.. skin oils wreck adhesion of first layer at modern first layer speeds.
This is what actually got me into 3d printing This got my hype up and got an ankermake m5c, which was not a mistake and at the end of the day I thank this man
Test is flawed. Blue skies make better vid, have to test in the same conditions.
Are u still printing??
damn! i think im gonna get one just to make that usb flash drive / card holder!!!
2024 update please?
I got the original ended 3 and it didn’t even come with instructions 😂
The DJI fpv drone is a great drone and I've liked it very much but it comes with a software glitch in the controller and the drone will fly away the glitch is in the controller it's a software issue by the factory they don't test them but you can get it tested I suggest testing it before you fly this drone it will fly away
The vista sits at 25 mw until armed
Hey Matt, I love your videos. They present all the information you need in a thorough manner but also easily understandable. However these videos are years old at this point, any chance you could do an updated series on FPV drones and the related gear with more up to date options? Either way you a new fan. Thanks for making these.
I got an Ender 3 Pro with 5 rolls of filament for free but I knew nothing about 3D printing. There's a lot to learn but with the help of KZread videos I was able to learn the in's and outs. The advice I have for novices is consider getting a filament drier or making one . I bought a cheap 2 roll dehumidifier and I find I have eliminated so many issues and better / more consistent prints. Also I researched and now understand what the correct first level thickness should look like after bed leveling and then I use a CHEP Bed Leveling Test Print to fine tune and it has been a game changer for me. Also adding "mouse ears" to a difficult print in order to maintain adhesion is a game changer.
❤
why does the links take me to google news?
Be teal careful in the States if you are not licensed you can not accept any kind of payment, not even food or lodging or any kind of exchange of goods.
does this 3d printer print pc fillaments?
The Ankermake can do 500 mm/s2, while a Creality K1 series can do up to 600 mm/s2, while also having the AI Camera on the K1C and Max, and being an Optional add on on the base K1, and being enclosed and with other features.
Can you share me the rates for interior flying?thx in advance
Can i use tx16s and dji o3 google on this?
Yes , it is😊
sir is it okay to buy a used fpv controller. if it is okay then which thing i should consider before buying it. love you great content sir. love from Bangladesh
The anwser is easy what need you have to build to what you need long range fast w.e
Nobody tells us how to fly straight...when ı go straight, the aircraft make wave with ascent and descent
Why the F would I want a Wireless charge for my Cell Phone Im just getting into the Hobby RN and bet you $100 bucks that I can Find something that does the same thing for half the price THIS IS BS
Would this be a good 1st printer? I'm impressed by how it's built.
Hey! Just wanted to give a quick warning. When you touch the build plate (as you did a few times in this video) it can screw with the bed adhesion for a print unless you clean it.
fantastic this drone!! i want to learn for drive in acro mode and i would record some videos in waterfalls this is the perfect drone..
learn something new thank you sir. great video. But it is too old can you make some sort of video like this with more details
awesome fpv collection sir, love you from Bangladesh
Come back on KZread buddy
Does the 80 dollar one come with goggles and controller
Ni
Would you suggest the Tango 2 controller with this model?
Hey bro. Than the heavens i found you again. You did an episode about finding the right channel for your fpv. Everytime i get up in the air, i lose signal. How do i fix this? I am a newb. I have a rekon 5 long range(analog) with a radioking open tx transmitter and an Eachine 800DM. Can you help me with this please🙏🏿🙏🏿?
if the same battery management logic applies to li-po powerbanks that are used for smartphones etc. does that mean when im not using it too much i should leave a charge of abt ~20%? as well
bambu lab a1
It is very bad practice to work for free, you destroy the market with this and people what live from this have peoblems selling there services
Sim is a must and a RC controller is another thing you must buy. I got a Frsky used for 40€. I first started with a PS4 controller and when I got the RC I had to learn from the begging. It is completely different way to do it. Get a controller and sim asap if you want the real experience.
i love fresyle i realy do but the way you talked about the mobula just makes me want to fly it so much cant wait to get one
He literally copied short circuits Ai camera part word for word
9:07 w hitch hikers thumb