Welcome to 'The Review King'-your ultimate destination for in-depth reviews and cutting-edge tech insights! 👑 Unleash the power of informed decision-making with our comprehensive reviews covering everything from the latest gadgets to innovative tech trends. Join the kingdom of tech enthusiasts, where we reign supreme in delivering honest, unbiased opinions and expert analysis. Whether you're a seasoned tech aficionado or a curious newcomer, our throne of reviews awaits you. Dive into a realm of unparalleled knowledge, where every click unlocks a wealth of information. Subscribe now and crown yourself with the wisdom of 'The Review King'!" 🚀📱
Пікірлер
Hey can I connect3 speakers together to a USB radio??
Thank you
Great video
what are the buttons "clean" and "dock" for? Mine started going around and stopped with "clean" button lit green.
from 4:20 to 6:20 you showed how to clean the brushes. I went a bit further, took apart everything, because my battery need replacement. It is at 0 V....... Roomba 614 not charging. Cleaned the contact, still not charging. green light stays lit for a min then goes out. took it apart. ......... ANOTHER question..... The cleaning box has a motor and 2 brushes. There is a 1/8 inch red sticker. Under this sticker there is a plastic "wire" or "needle", flexible, with a small ball-anchor. The anchor remains in the socket under the red sticker, and the plastic "needle" follows a channel in the pulley on the motor. The motor appears to be freely swinging in its socket along its rotor-axle. As the motor turns left-right, the pulley moves. There is a small hole at the end of the pulley channel, where the plastic "needle" appears to enter. This element does not appear to be sold separately. I think I need a replacement of this "needle" How long is this "needle"? What is the purpose? I think I can use weed-eater string or fishing line, they come at different diameters. I can improvise. Any idea?
I just got the Ds787 as a gift from an uncle but it seems like only one of the speaker outputs are working so i hooked the two side speakers, the frontal and the subwoofer onto that working output
Can I use this device to output Zone B audio from my old Yamaha Receiver and send it to my backyard Bluetooth powered speaker?
Does this have a shuffle mode for the USB flash drive?
What if it decides to stop working?
Why can’t I hear myself in my headphones when both are plugged into the laptop ?
i hope you reply im needing a little help, i have a Hisense smart tv and a Sony multi-channel receiver, i tried the HDMI cord but i heard somewhere that both devices have to support ARC which it doesn't say it on the receiver then my step father told me i could just run the red white yellow cables but there's no where on my tv that has the 3 spots so i got an attachment that plugs into the spot and breaks out into the red white yellow. we don't want to hook up any play stations or dvds we only want it for sound for netflix and all the in apps on the tv hope this makes sense and i hope i hear back from you and can get this figured out
ce
Does your TV have to be on a certain channel
Can you just hook a USB into your TV from phone to watch tubi moves off of your phone
I have an RCA receiver and when I turn it on on the speakers turn on and off on and off what can possibly be wrong do you need more information? Thank you if you can help
Wow too complicated
How to reset lube
I have a Pioneer SX780 ( 1978 ) completely redone - new caps, pots, LEDs, and wood case is new - a flawless vintage unit. How can I hook up a new 75" LG to my vintage gear, if possible? Thanks for any info you can share.
Can I use this just to boost the sound from my iPhone to my AirPod max
Help Me please.
?
Thank you, Review King! I learned to used my little brother Music Tuner device while traveling on the East Interstate 70.
Everytime I open KZread off my smart tv, my receiver starts disconnecting, and a message pops up: anynet+ is not connected. Check and try again I try connecting my ps4, although the audio comes through the HDMI I never get the start up menu of anynet+ that I can switch through the HDMI plug in through my receiver making it not see able on my tv could you give me recommendation on what to do.
Everytime I open KZread off my smart tv, my receiver starts disconnecting, and a message pops up: anynet+ is not connected. Check and try again I try connecting my ps4, although the audio comes through the HDMI I never get the start up menu of anynet+ that I can switch through the HDMI plug in through my receiver making it not see able on my tv could you give me recommendation on what to do.
Hi, just watched this and wanted to say our roomba is working so much better now! It was super dirty inside - I don't think we'd cleaned it in the years we had been using it before it "broke". Thanks for getting straight to the point and having a concise video!
Great instructional video. I just installed mine successfully. The supplied tape is not excessive but it worked.
I bought a similar device from Amazon but without an optical port. I’m trying to get my old Sharp Sound Bar to work with my modem Sony Bravia TV. I tried everything and it still doesn’t work, even with the HDMI cable hooked up to the TV. What am I doing wrong?
Question i dont have ARC on my av receiver and i wanted to hook up with my graphic card video card with hdmi so i have better sound and its not working what im doign wrong? i wonder how i can run like that? thanks and great video so far
Good day - can u pls inform what device should I use, in order to pair an old receiver to wireless bluetooth speakers? I have an old Technics receiver & old Sony turntable which is hooked up to the receiver and a Denon CD player, which is also hooked up to the receiver...and i want to get rid of my old speakers and want to use wireless bluetooth speakers....sounds crazy but i don't want to buy another new turntable or CD player, but want to enjoy music from new wireless bluetooth speakers Should i use a transmitter or receiver? If 'transmitter', which device you can advice? I'll be very pleased to hear your detailed reply - - many thanks from İstanbul, Turkey
Hello, for my surround sound, some speakers are soft and some are much louder than others. What can i do to fix this
hello, im trying to connect my laptop thru hdmi to this onkyo avr, my problem is the center and two surround speakers are not playing any sound...what should i do?
I love the energetic review!
Hello what if your tv is a smart tv and you don’t need to go into another “in” HDMI.? The tv is the source . I can’t figure out how to get sound . I have a onyko receiver
I have just bought one of these to use with my lavalier mic, to record videos with my iPhone 13 Pro. It works really well and records fine, as long as I am not charging at the same time. When I do, there is an unpleasant electrical hum on the recording. I did some digging and found out that a ground loop isolator might solve the problem. I bought one, but discovered it has 3.5 mm TRS connectors, and my microphone has 3.5 mm TRRS connectors, so of course it doesn't work. I have searched high and low for a ground loop isolator with TRRS connectors, without success. I do not know if such a thing even exists, and if not, why it does not. Do you have any suggestions as to how I might resolve the issue of the electrical hum?
Hello I have a RCA home theater system rt2390 and I have no sound coming from my speakers and I don't know how to fix it
Ok, got a tx-sr604. Want to hook my Samsung smart tv to this to have sound. How do I do that?
You will to use HDMI ARC from tv to receiver
N¡gga, are you rapping?! 🤣
What if you don’t want just 88.1 FM?
You can choose the station
Do you know of one that will both Transmit and Receive bluetooth signals - so that I can transmit music Out of old receiver to a BT speaker for instance?
You saved our party man thanks
Does it also work on old TVs?
Yes
Good thing ur video doesnt freeze mine does when i go to a certain height
Do you plug the other hdmi end into any hdmi port on Tv?
Hello I have the same dts amplifier but i can not connect it with my smart LED with HDMI plz help me to connect this onkyo amp with smart led
So helpful!
Outstanding!
I forgot to mention I have a Denon AVC-2000 receiver with a s-video connection and a new Samsung tv with HDMI connections, how do I connect for surround sound
What if my speaker and amp have block connectors but my speaker reads +-+- and my amp reads +- -+? How would I hook it up?
Thank you for the helpful tip.
Error 255 I believe i damaged speakers because I did not wire correctly so guess I donate my RCA ☹️ stereo
How did you wire them?
How can I hook my old receiver to new speakers that don't use the wire clips on the back? Thanks for your help
What type is on the back of the speakers?
@@ReviewKingHQ I bought this Vizio and I'm at a loss (VIZIO M51A-H5 M-Series 5.1 Channel Soundbar with Dolby Atmos) is it possible?