These homemade wood sawmill machines showcase modern technology at its finest, delivering extreme fast wood cutting capabilities.
@schithead72 күн бұрын
Geez , , , just play the video ....... WHY THE CRAPPY MUSIC ????????????
@isaacmann87194 күн бұрын
can you make this but candy please? i'm imagining a lolipop of sorts. i'm hungry haha 8:14
@isaacmann87194 күн бұрын
oh me too! wow haha 8:15
@ksseo5066 күн бұрын
glass melting and glass molding work. 1] Melting glass, shaping. In the past, electronic guns that shoot the light of CRT TVs had the work of melting and attaching glass. It is very difficult to melt glass parts one by one and then shape them and attach them to the parts, and the work is slow.The spacing between the stainless steel parts is several tens of microns.It was about a few millimeters.Companies have done this by automating it in an easier way. 1)At that time, LNG gas and oxygen were used as gases that melt glass parts. Gas-only use is insufficient oxygen, resulting in insufficient temperature to melt the glass and delayed. There's methane gas coming out of the poop. The composition of LNG gas is methane gas.There are two types of methane gas in poop: sinking and light floating. Materials need to be found on the Internet and in books. Burners using LNG gas and oxygen are required.I think there are many ways to melt glass. 2)Ceramic or platinum was used as the support for glass parts when melting glass. Platinum is expensive, but it has a low defect rate due to less foreign matter. Ceramic is cheap and brittle by impact. The reason why ceramic or platinum is used as a support for melting glass is that melting glass makes it difficult to form a glass shape as glass sticks to ordinary materials. This is because ceramics and platinum withstand heat at glass molding temperatures. The glass stand is manufactured and used in the shape of the product you want to make. When the melted glass is pressed on the product-shaped pedestal, the product shape is stamped. 3)Cleaning. When melting the glass, sometimes foreign substances in the glass come out and get on the pedestal, and foreign substances stick to the next glass. I cleaned every two hours with a wet towel. 4)The material for fixing the glass base was stainless steel (SUS). In the head equipment of the stainless steel, there was an air vacuum hole that temporarily held the glass. The head holding the glass pedestal had cooling water in, cooling water out, vacuum holes using air, and three pipes. The reason why a vacuum was needed was because the glass was raised and melted, and vacuum was needed when holding and gluing. There was a hole about 1-2mm in the glass stand for vacuum, and there was also a vacuum hole in the head fixing the glass stand. Coolant is required to reduce the higher temperature of stainless steel and ceramic. The glass could not be fixed by vacuum, so there was a part where a small stainless steel plate was pinned to the lower part of the glass(1mm stainless steel plate and spring to move up and down). 5)The melting temperature of glass was 1050-1300 degrees Celsius in 11 seconds, and then the glass was attached to the part of the soot. The melting temperature was different for each color of the glass. White was around 1050-1100 degrees Celsius, and it was difficult to raise the temperature beyond that. If the temperature was increased, the glass properties would change and burn, resulting in defects. Brown and yellow at 1300 degrees Celsius. Blue and gray at 1200-1250 degrees Celsius, I think. I can't remember. 6)Use an infrared thermometer to measure the temperature at which the glass melts. I sell it on the Internet. 7)I need a burner picture and a stainless steel part holding the glass stand. The burner requires a supply of LNG gas and an oxygen supply. In order to use LNG gas, a backfire preventer is required in the gas supply. The anti-reversal device prevents the ignited gas from burning upside down into the pipe.In general, LNG gas comes out little by little so that the fire does not go out. When working, the gate valve is used to release LNG first and then oxygen.The supply pressure of LNG, oxygen, and air seems to have been around 1~2 (kgf/cm2) (not sure). 8) Glass is manufactured using glass raw materials. Alternatively, glass is made by melting the made glass. In the company, glass made in a certain shape was melted in advance and worked only on the shape. 9)When making ceramics, there is a way to mix the metals that are melted little by little with ultrasonic waves in water with soil. There is also a method of mixing plant juice with soil.I don't know because I didn't work on this part. 10)The dimensions of the drawing may not fit, and adjustments are required. 11)The anti-retarder needs to be replaced every few years.Need to check with equipment if gas leaks every month.
@MireillewumbaMiezi-iw2qo9 күн бұрын
I love it wow ❤
@stephenbrown16229 күн бұрын
They fight till the bitter end
@sherrywang42339 күн бұрын
dude just casually touched hot glass????
@D-EagleMachines-on6dg11 күн бұрын
Absolutely mind-blowing! These wood chipper machines are insanely powerful, making quick work of even the biggest trees. Incredible to see modern technology at its finest!
@D-EagleMachines-on6dg11 күн бұрын
Incredible! These wood destroy machines are a force to be reckoned with. Watching them shred tree stumps at such a rapid pace is both astonishing and slightly terrifying.
@user-dq5js5ck9v11 күн бұрын
ПРОСТО СУПЕР ❤
@Stan_in_Shelton_WA12 күн бұрын
ear blast channel blocked
@HK-FOREST12 күн бұрын
wow very impressive ....
@rmscr7ronald16 күн бұрын
👍 🇧🇴 Fans n1 Bolivia 🇧🇴 💯 presente aquí waoo 💯 me gusta me encanta ver este tipo de videos 📹 👀 saludos cordiales desde sudamerica santa cruz Bolivia 🇧🇴 Okey 👍 📹👀📹👀👍😁
@AflaudizioRibeirodosSant-ek2bl17 күн бұрын
ENJOO DA PESTE, É O TEMPO TODO OUVINDO O RESMUNGAR DESSE POVO!
@BottleBri17 күн бұрын
I collect antique bottles and I would love to see a case gin bottle made with a seal on it.
@destroywoodusa17 күн бұрын
After watching this, I feel like I need to thank every wood chipper I've ever seen on the side of the road. They're like unsung heroes of the forestry world, turning bulky trees into bite-sized chips with finesse and style. Bravo! 👏🌲➡🪓
@moonlightfitz17 күн бұрын
😅
@williamgrissom199523 күн бұрын
Interesting video if you ignore the Ai voice over.
@fishstraws62623 күн бұрын
And the obviously AI generated script it’s reading. Channel owner looks up footage, googles the machine name on the footage, then asks chatgpt to write a script for the video. Literally lazy and guy probably makes thousands of dollars. I guess it doesn’t matter, but it feels bad
@572Btriode23 күн бұрын
@@fishstraws626 at 4:35, 14/28ths of a centimetre/second ? Perhaps we could call that a half centimetre, or maybe just 5mm/sec.
@JamRock_Jr.25 күн бұрын
So can these people earn a living with this or its just a hobby?
@jonhunt540825 күн бұрын
Feeds a strut to a shredder and then stands there to film. You are either very brave; or very stupid. -Lucius Malfoy
@ilirvargu708325 күн бұрын
nahhh
@ilirvargu708325 күн бұрын
🐤🐤🐤🐤🐤🐤🐤🐤🐤🐤🐤🐤🐣🐣🐣🐣🐣🐣🐣🐣🐣🐣🐣🐤🐤🐤🐤🐤🐤🐤🐤
@ilirvargu708325 күн бұрын
@shannonmariehauck25 күн бұрын
Poor little Otik
@danieledwards142226 күн бұрын
Nice machines but I don't think these guys are very smart because I didn't see one chipper but I did see GRINDER'S...🤔🤨🫤
@yacinedesign388626 күн бұрын
Hi there I've been a fan of your KZread channel for some time now and admire the quality content you create. I specialize in logo redesigns and believe a fresh, well-designed logo and KZread banner could enhance your brand's identity and audience connection. I'd love to collaborate with you to create a logo that truly represents your channel and resonates with your viewers. If you're interested, I can provide initial concepts and ideas for your consideration. Thank you for considering my offer. I look forward to the possibility of working together. Best regards, Yacine
@rakyat622327 күн бұрын
What the price for the machine like that and what production
@WhatUrYaLookinAtMyGutFer29 күн бұрын
Be careful when blowing glass. If you accidentally breathe in the molten glass you will die instantly.
@--XloW--29 күн бұрын
thats somehow terrifying 9:37
@aidalopez3744Ай бұрын
👏👏👏👏
@annadudziak7057Ай бұрын
YEP AMAZING JOB DONE BUT WHY NO GLOVES AIN'T SAFE 😁 SORRY I'M ALWAYS WORRIED ABOUT EVERYBODY YEP 😂GOING INTO CORNER AS PUNISHMENT 😂OMG RESPECT TO ALL LIVES
@user-ju2bb6mm4mАй бұрын
Groot angry
@randawilliams9243Ай бұрын
BEAUTIFUL!!!
@D-EagleMachines-on6dgАй бұрын
The 'Extreme Dangerous Monster' in the woodworking industry truly showcases modern innovation. The capability of this wood chipper has the whole world in awe. A marvel of engineering! 🌍🌲
@DorisDeng-gf4rmАй бұрын
I have used the machine of ZHANJIANG WEI DA MA CHINERY INDUSTRAL CO.,LTD before, and I feel the effect is very good.
@swagtech_Ай бұрын
Great automatic large fast wood chipper Today's technology
@Ada-ke6eiАй бұрын
I am a pellet machine equipment manufacturer from China. I see that you have crusher and wood raw materials. If you need a pellet machine, please contact me
@mcburckeАй бұрын
Man, that first chipper design is a badass machine! Second one sucks. Third one sucks. Fourth one is too slow. Fifth one is underpowered.
@falcon4548Ай бұрын
Fjb
@gehrigboone9920Ай бұрын
Weak machine.
@gehrigboone9920Ай бұрын
Old footage..this the best you can do?
@gehrigboone9920Ай бұрын
Don’t need a running commentary……
@cinziamattioni7916Ай бұрын
Stupendi gli oggetti in cristallo 👏
@pqvpqv1996Ай бұрын
How about some new videos some of these are years old?
@FrithgarАй бұрын
Please stop talking
@nancyjones6780Ай бұрын
I'm really aggravated that the last piece was blocked in it's final stage so that we couldn't see it. Ffs
@brendadalton8309Ай бұрын
so beautiful i love glass
@ivankazervet4189Ай бұрын
Sinnlos...
@D-EagleMachines-on6dgАй бұрын
Watching these amazing automatic fast big wood chipper machines in action showcases the pinnacle of modern technology and efficiency in tree shredding. Truly the best large tree shredder machines out there!
Пікірлер
These homemade wood sawmill machines showcase modern technology at its finest, delivering extreme fast wood cutting capabilities.
Geez , , , just play the video ....... WHY THE CRAPPY MUSIC ????????????
can you make this but candy please? i'm imagining a lolipop of sorts. i'm hungry haha 8:14
oh me too! wow haha 8:15
glass melting and glass molding work. 1] Melting glass, shaping. In the past, electronic guns that shoot the light of CRT TVs had the work of melting and attaching glass. It is very difficult to melt glass parts one by one and then shape them and attach them to the parts, and the work is slow.The spacing between the stainless steel parts is several tens of microns.It was about a few millimeters.Companies have done this by automating it in an easier way. 1)At that time, LNG gas and oxygen were used as gases that melt glass parts. Gas-only use is insufficient oxygen, resulting in insufficient temperature to melt the glass and delayed. There's methane gas coming out of the poop. The composition of LNG gas is methane gas.There are two types of methane gas in poop: sinking and light floating. Materials need to be found on the Internet and in books. Burners using LNG gas and oxygen are required.I think there are many ways to melt glass. 2)Ceramic or platinum was used as the support for glass parts when melting glass. Platinum is expensive, but it has a low defect rate due to less foreign matter. Ceramic is cheap and brittle by impact. The reason why ceramic or platinum is used as a support for melting glass is that melting glass makes it difficult to form a glass shape as glass sticks to ordinary materials. This is because ceramics and platinum withstand heat at glass molding temperatures. The glass stand is manufactured and used in the shape of the product you want to make. When the melted glass is pressed on the product-shaped pedestal, the product shape is stamped. 3)Cleaning. When melting the glass, sometimes foreign substances in the glass come out and get on the pedestal, and foreign substances stick to the next glass. I cleaned every two hours with a wet towel. 4)The material for fixing the glass base was stainless steel (SUS). In the head equipment of the stainless steel, there was an air vacuum hole that temporarily held the glass. The head holding the glass pedestal had cooling water in, cooling water out, vacuum holes using air, and three pipes. The reason why a vacuum was needed was because the glass was raised and melted, and vacuum was needed when holding and gluing. There was a hole about 1-2mm in the glass stand for vacuum, and there was also a vacuum hole in the head fixing the glass stand. Coolant is required to reduce the higher temperature of stainless steel and ceramic. The glass could not be fixed by vacuum, so there was a part where a small stainless steel plate was pinned to the lower part of the glass(1mm stainless steel plate and spring to move up and down). 5)The melting temperature of glass was 1050-1300 degrees Celsius in 11 seconds, and then the glass was attached to the part of the soot. The melting temperature was different for each color of the glass. White was around 1050-1100 degrees Celsius, and it was difficult to raise the temperature beyond that. If the temperature was increased, the glass properties would change and burn, resulting in defects. Brown and yellow at 1300 degrees Celsius. Blue and gray at 1200-1250 degrees Celsius, I think. I can't remember. 6)Use an infrared thermometer to measure the temperature at which the glass melts. I sell it on the Internet. 7)I need a burner picture and a stainless steel part holding the glass stand. The burner requires a supply of LNG gas and an oxygen supply. In order to use LNG gas, a backfire preventer is required in the gas supply. The anti-reversal device prevents the ignited gas from burning upside down into the pipe.In general, LNG gas comes out little by little so that the fire does not go out. When working, the gate valve is used to release LNG first and then oxygen.The supply pressure of LNG, oxygen, and air seems to have been around 1~2 (kgf/cm2) (not sure). 8) Glass is manufactured using glass raw materials. Alternatively, glass is made by melting the made glass. In the company, glass made in a certain shape was melted in advance and worked only on the shape. 9)When making ceramics, there is a way to mix the metals that are melted little by little with ultrasonic waves in water with soil. There is also a method of mixing plant juice with soil.I don't know because I didn't work on this part. 10)The dimensions of the drawing may not fit, and adjustments are required. 11)The anti-retarder needs to be replaced every few years.Need to check with equipment if gas leaks every month.
I love it wow ❤
They fight till the bitter end
dude just casually touched hot glass????
Absolutely mind-blowing! These wood chipper machines are insanely powerful, making quick work of even the biggest trees. Incredible to see modern technology at its finest!
Incredible! These wood destroy machines are a force to be reckoned with. Watching them shred tree stumps at such a rapid pace is both astonishing and slightly terrifying.
ПРОСТО СУПЕР ❤
ear blast channel blocked
wow very impressive ....
👍 🇧🇴 Fans n1 Bolivia 🇧🇴 💯 presente aquí waoo 💯 me gusta me encanta ver este tipo de videos 📹 👀 saludos cordiales desde sudamerica santa cruz Bolivia 🇧🇴 Okey 👍 📹👀📹👀👍😁
ENJOO DA PESTE, É O TEMPO TODO OUVINDO O RESMUNGAR DESSE POVO!
I collect antique bottles and I would love to see a case gin bottle made with a seal on it.
After watching this, I feel like I need to thank every wood chipper I've ever seen on the side of the road. They're like unsung heroes of the forestry world, turning bulky trees into bite-sized chips with finesse and style. Bravo! 👏🌲➡🪓
😅
Interesting video if you ignore the Ai voice over.
And the obviously AI generated script it’s reading. Channel owner looks up footage, googles the machine name on the footage, then asks chatgpt to write a script for the video. Literally lazy and guy probably makes thousands of dollars. I guess it doesn’t matter, but it feels bad
@@fishstraws626 at 4:35, 14/28ths of a centimetre/second ? Perhaps we could call that a half centimetre, or maybe just 5mm/sec.
So can these people earn a living with this or its just a hobby?
Feeds a strut to a shredder and then stands there to film. You are either very brave; or very stupid. -Lucius Malfoy
nahhh
🐤🐤🐤🐤🐤🐤🐤🐤🐤🐤🐤🐤🐣🐣🐣🐣🐣🐣🐣🐣🐣🐣🐣🐤🐤🐤🐤🐤🐤🐤🐤
Poor little Otik
Nice machines but I don't think these guys are very smart because I didn't see one chipper but I did see GRINDER'S...🤔🤨🫤
Hi there I've been a fan of your KZread channel for some time now and admire the quality content you create. I specialize in logo redesigns and believe a fresh, well-designed logo and KZread banner could enhance your brand's identity and audience connection. I'd love to collaborate with you to create a logo that truly represents your channel and resonates with your viewers. If you're interested, I can provide initial concepts and ideas for your consideration. Thank you for considering my offer. I look forward to the possibility of working together. Best regards, Yacine
What the price for the machine like that and what production
Be careful when blowing glass. If you accidentally breathe in the molten glass you will die instantly.
thats somehow terrifying 9:37
👏👏👏👏
YEP AMAZING JOB DONE BUT WHY NO GLOVES AIN'T SAFE 😁 SORRY I'M ALWAYS WORRIED ABOUT EVERYBODY YEP 😂GOING INTO CORNER AS PUNISHMENT 😂OMG RESPECT TO ALL LIVES
Groot angry
BEAUTIFUL!!!
The 'Extreme Dangerous Monster' in the woodworking industry truly showcases modern innovation. The capability of this wood chipper has the whole world in awe. A marvel of engineering! 🌍🌲
I have used the machine of ZHANJIANG WEI DA MA CHINERY INDUSTRAL CO.,LTD before, and I feel the effect is very good.
Great automatic large fast wood chipper Today's technology
I am a pellet machine equipment manufacturer from China. I see that you have crusher and wood raw materials. If you need a pellet machine, please contact me
Man, that first chipper design is a badass machine! Second one sucks. Third one sucks. Fourth one is too slow. Fifth one is underpowered.
Fjb
Weak machine.
Old footage..this the best you can do?
Don’t need a running commentary……
Stupendi gli oggetti in cristallo 👏
How about some new videos some of these are years old?
Please stop talking
I'm really aggravated that the last piece was blocked in it's final stage so that we couldn't see it. Ffs
so beautiful i love glass
Sinnlos...
Watching these amazing automatic fast big wood chipper machines in action showcases the pinnacle of modern technology and efficiency in tree shredding. Truly the best large tree shredder machines out there!
lol
Right? lol