6 years 6 likes if that doesn't show you it sucks nothing will.
@Locutus_livesАй бұрын
So are all these videos pros using a free platform because they suck intentionally as to not show you how. Front view showing nothing while pretending to show you how. Well sorry your job can be done by a monkey I just did it and it was easier than you show.
@cecilyt0062 ай бұрын
BOSS LEVEL
@Zelda-lj5nn2 ай бұрын
this is a terrible video, it doesnt tell us anything
@jameschuke41043 ай бұрын
#1 why didn't you use the better one that's for urethane?#2 the harbor freight one was for the older windshields. # 3 you cheated and used the power blade! 😅
@jameschuke41043 ай бұрын
Only for non urethane use
@WeDepict4 ай бұрын
This is a great video! You are a beautiful man!
@neiljarvis89116 ай бұрын
Cool job!
@trickie5186 ай бұрын
Harbor freight discontinued that style windshield tool with so called cold blade. I personally don't think it was cold knife blade
@DeltaValleyAutoGlass6 ай бұрын
This video helped me make my mind up I was really torn between the delta kits and Glasweld. Let’s just say I purchased the Glasweld zoom and it’s been absolutely amazing!! 🤘🏽 thanks for making this video super helpful
@94regnar7 ай бұрын
Thanks, my vehicle is a 2018 Ford Explorer, apparently the wiper arms are wider on these than most other vehicles, I had to purchase a couple of these pullers before getting the right one that would fit.
@molloarden89387 ай бұрын
Cover brackets that hold cover in place break easily (plastic). Inserting rubber attachments into brackets should hold cover in place.
@Ash-gc6kj8 ай бұрын
Thank you!!!
@chrispkreme77088 ай бұрын
Bro you saved my a$$, after trying for 3 days on my monte Carlo with a soldering iron I couldn’t get the window hot enough for the solder to stick. The solder would melt but only bond to the connector. I did this and it finally worked thank you!!!!
@charzpak71739 ай бұрын
Where do i get a compressed air to test it at home? Like keyboard cleaner?
@edreynolds374510 ай бұрын
you helped a lot of folks.Thanks.
@DanielADickey Жыл бұрын
wow! nice!
@TheKts525 Жыл бұрын
How do you take off the adhesive?
@otherwise7972 Жыл бұрын
Good info, thanks Jan 2023
@eddiebishop2973 Жыл бұрын
Are you guys still in business?
@dapinkcat Жыл бұрын
After replacing the windshield, the cover is loose, I don't want to break it. It won't just popped back in. Do you think the clips are broke? I've got a 2017 AMGs c63.
@yuanhenry5132 Жыл бұрын
I do have a camera in the front on my Mercedes but I don’t got lane keep assist . That’s weird
@rctruxbashing7420 Жыл бұрын
Good news, it now comes with a different blade and it’s manufactured to accept other blades as well, I just used one 2 days ago to pull a back glass for a bmw…saved me over 800.00
@britishinvader Жыл бұрын
Does it have to be placed to the same spot that it was at?....I have a 2011 Ford edge and the spot where it was is very difficult to get to...tried all of the glues and none of them worked.....soldering is my only hope....
@lothianmcadam1 Жыл бұрын
Skip the blah blah blah.... click 14:46 for "I'm calling this Harbor Freight windshield removal tool... junk"
@kimjay481 Жыл бұрын
I think you are a genius! Thank you.
@christopherleubner6633 Жыл бұрын
I used a cable commando saw and it worked very quickly ❤
@TheJIMIJAM27 Жыл бұрын
Thanks for the video very helpful
@kxpes Жыл бұрын
I currently think how much glue to apply after i repainted chassy and this video cannot help s*** for anybody
@JoHa-dl5zr Жыл бұрын
I sprinkled baby powder around my windshield seal and used forced air from inside to find my leak.
@ElkGroveGlass2 жыл бұрын
Nice Video! Customers never know what they have! haha. This video helps thank you!
@gagarinyuri752 жыл бұрын
Do not buy this crap Blade will bend and eventually break
@Wergrun2 жыл бұрын
Nice! Like a giant screen protector, how much does this cost?
@jasonrod772 жыл бұрын
I wish I would’ve found this video first. I watched another video with a prybar guess what? I broke the damn regulator! I wish I would’ve got the puller.!!
@barnettelias72022 жыл бұрын
Can’t see anything.
@mrpicklebuneyes40982 жыл бұрын
Just ordered my pro Glasweld kit, excited to get started. I've been doing chip/crack repair for over a year at a "big name" autoglass shop, but I'm going out on my own and this kit looks really user-friendly and simple to operate.
@korsion2 жыл бұрын
I think the camera was a bit to close.
@WWarthog7982 жыл бұрын
How about for tinted windshields?
@Frankmjcsmm2 жыл бұрын
No often you get solid info/instruction from an honest tech…… thanks for your time young man.
@mhoch17362 жыл бұрын
But does it work afterwards?
@judiecollins90452 жыл бұрын
THANK YOU!!!
@grease_monkey90442 жыл бұрын
Are you still using this system?
@JRxxx2 жыл бұрын
Can I replace the wiper arms on a 2015 explorer with the wiper arms from a 2015 expedition(hook style) ? The Explorer wiper tabs (OEM motorcraft and aftermarket) keep breaking under heavy snow fall.
@jordangeorge44632 жыл бұрын
How can you just fix lose trim without changing glass
@carlosogu51962 жыл бұрын
Surprising. What type of solder did you use? Tin solder? Did you use solder paste?
@rogermorits54152 жыл бұрын
how does rear defrost get plugged in ? inside trim comes out?
@patrickhall68312 жыл бұрын
Not the guys saying he's going to break it when he's clearly done this on hundreds of not 1000s of windows now I probably wouldn't use direct flame but there's certainly nothing wrong with this method as long as you know what your doing. I was trying the method with a lighter hoping for the same result but you definitely need a more precise flame if your want to go that route. I'm personally going to try tomorrow mourning with a soldering iron and hope she finally sticks
@SUSBOY100B2 жыл бұрын
Great video man! You didn’t just give us a review. You also showed us how to make the tool work better than factory!
@joeabbott7839 Жыл бұрын
Wood work better if you use heat gun on glass when cuttit it out
Пікірлер
6 years 6 likes if that doesn't show you it sucks nothing will.
So are all these videos pros using a free platform because they suck intentionally as to not show you how. Front view showing nothing while pretending to show you how. Well sorry your job can be done by a monkey I just did it and it was easier than you show.
BOSS LEVEL
this is a terrible video, it doesnt tell us anything
#1 why didn't you use the better one that's for urethane?#2 the harbor freight one was for the older windshields. # 3 you cheated and used the power blade! 😅
Only for non urethane use
This is a great video! You are a beautiful man!
Cool job!
Harbor freight discontinued that style windshield tool with so called cold blade. I personally don't think it was cold knife blade
This video helped me make my mind up I was really torn between the delta kits and Glasweld. Let’s just say I purchased the Glasweld zoom and it’s been absolutely amazing!! 🤘🏽 thanks for making this video super helpful
Thanks, my vehicle is a 2018 Ford Explorer, apparently the wiper arms are wider on these than most other vehicles, I had to purchase a couple of these pullers before getting the right one that would fit.
Cover brackets that hold cover in place break easily (plastic). Inserting rubber attachments into brackets should hold cover in place.
Thank you!!!
Bro you saved my a$$, after trying for 3 days on my monte Carlo with a soldering iron I couldn’t get the window hot enough for the solder to stick. The solder would melt but only bond to the connector. I did this and it finally worked thank you!!!!
Where do i get a compressed air to test it at home? Like keyboard cleaner?
you helped a lot of folks.Thanks.
wow! nice!
How do you take off the adhesive?
Good info, thanks Jan 2023
Are you guys still in business?
After replacing the windshield, the cover is loose, I don't want to break it. It won't just popped back in. Do you think the clips are broke? I've got a 2017 AMGs c63.
I do have a camera in the front on my Mercedes but I don’t got lane keep assist . That’s weird
Good news, it now comes with a different blade and it’s manufactured to accept other blades as well, I just used one 2 days ago to pull a back glass for a bmw…saved me over 800.00
Does it have to be placed to the same spot that it was at?....I have a 2011 Ford edge and the spot where it was is very difficult to get to...tried all of the glues and none of them worked.....soldering is my only hope....
Skip the blah blah blah.... click 14:46 for "I'm calling this Harbor Freight windshield removal tool... junk"
I think you are a genius! Thank you.
I used a cable commando saw and it worked very quickly ❤
Thanks for the video very helpful
I currently think how much glue to apply after i repainted chassy and this video cannot help s*** for anybody
I sprinkled baby powder around my windshield seal and used forced air from inside to find my leak.
Nice Video! Customers never know what they have! haha. This video helps thank you!
Do not buy this crap Blade will bend and eventually break
Nice! Like a giant screen protector, how much does this cost?
I wish I would’ve found this video first. I watched another video with a prybar guess what? I broke the damn regulator! I wish I would’ve got the puller.!!
Can’t see anything.
Just ordered my pro Glasweld kit, excited to get started. I've been doing chip/crack repair for over a year at a "big name" autoglass shop, but I'm going out on my own and this kit looks really user-friendly and simple to operate.
I think the camera was a bit to close.
How about for tinted windshields?
No often you get solid info/instruction from an honest tech…… thanks for your time young man.
But does it work afterwards?
THANK YOU!!!
Are you still using this system?
Can I replace the wiper arms on a 2015 explorer with the wiper arms from a 2015 expedition(hook style) ? The Explorer wiper tabs (OEM motorcraft and aftermarket) keep breaking under heavy snow fall.
How can you just fix lose trim without changing glass
Surprising. What type of solder did you use? Tin solder? Did you use solder paste?
how does rear defrost get plugged in ? inside trim comes out?
Not the guys saying he's going to break it when he's clearly done this on hundreds of not 1000s of windows now I probably wouldn't use direct flame but there's certainly nothing wrong with this method as long as you know what your doing. I was trying the method with a lighter hoping for the same result but you definitely need a more precise flame if your want to go that route. I'm personally going to try tomorrow mourning with a soldering iron and hope she finally sticks
Great video man! You didn’t just give us a review. You also showed us how to make the tool work better than factory!
Wood work better if you use heat gun on glass when cuttit it out
Nice tip, thank you for sharing.
Can the resin fill a deep scratch?