Damn when i picked mine up after ida i used synthetic atf because it's all i could find i guess imma find out if it's ok
@jeremyp99635 сағат бұрын
What are your thoughts on replacing the cam sensors also?
@philliphall51983 күн бұрын
No corn gas folks. Please listen 😊
@philliphall51983 күн бұрын
People just don’t understand that they have to take care of equipment and service it often 😢😢😢
@sicklecell99993 күн бұрын
Can't find these kits. where did you get them? GREAT VID THANKS ! !
@Lordofjunk3 күн бұрын
rockauto has them
@shanonaguayo16363 күн бұрын
How did the grass turn out??
@Covebasedolly7 күн бұрын
Thanks bro.
@williamschilke39548 күн бұрын
I just asked someone how I should store my new generator he said to let run out with seafoam. Any thoughts?
@rasowa29589 күн бұрын
I only use ethanol-free gasoline with stabil. It easily stays good for 24 months. I never plan for storing my generator. How do I know if hurricane come next year, or may I need to use it even earlier? Only when not used for 2 years then I take actions. First I drain the fuel tank. I drain it from the top with a hose (I don't like disconnecting fuel line, it's connected so tight I'm afraid I will struggle to reconnect it). Then I add fresh gasoline (ethanol-free with stabil, of course). Then I run the generator for at least 20 minutes to make sure the old gasoline in carburetor and fuel line get burned out. Now it can wait another 2 years. The old gasoline drained from the generator goes to my jeep's tank.
@rodolfotamayo518012 күн бұрын
My '06 Pathfinder is throwing the same code P0335, but additionally 2 other codes also: P0021 and P0022, but not the symptoms you're having.. any ideas what else besides this sensor, will i need to replace..? Thanks in advance!
@JamesBonham-rb9sz19 күн бұрын
This guy knows / strait edge and center dot for TDC rotor ....right on Brother
@Boxbirder21 күн бұрын
Don’t forget a head lamp handy. I swear I did this to my generator when you did the first vid 3 pulls smoke fart boom. Thanks
@philliphall51983 күн бұрын
I ware a cap light all the time, as a life time mechanic it’s just handy 😮
@SuperBoppy24 күн бұрын
Great video. I was wondering if there were torque specifications for the 4 rear mounting bolts or for the main hub nut on the front? I recently had to have a the LR bearing replaced. I suspected it was the bearing, but I wasn't sure. As far as the sound, I would describe it as if you were flying a single-engine airplane or something. Definitely a grindy-type noise. I wonder if this is some kind of design or manufacturing problem? I was in the shop (again) a few weeks later for an intermittent ignition problem, and there was a customer in the waiting room who had two bearings go on her at once.
@katyv410625 күн бұрын
Do you do anything with Harbor Freight predator generators?
@hannahprice78129 күн бұрын
So I went to check my wheel bearings like you did. I jacked my car and had all 4 tires off the ground. Turned my car on. Put in in drive but only my passenger front tire would turn. My rear driver side turned for 5 minutes and I could hear the roaring from that tire but not the front. The driver front and passenger rear would not turn. Even if I turned them they would stop. After the 5 minutes the driver side rear tire quit spinning. The only one spinning, and stayed spinning, was the front passenger. The driver side front tire wanted too but wouldnt(you could see small jerking forward movements). I'm confused why they wouldn't spin. Once I lowered my car I got in and noticed 6 dash lights came on (check engine, AT temp oil, abs, hill start assist, traction warning, and my cruise control symbol flashes on and off). Now I'm really lost lol I didn't take anything apart
@arielivanolaizolaАй бұрын
Hola, alguno logro instalar el distribuidor de la primera generación de Pathfinder vg30, en esta que seria la vg33?
@monicakeehn3052Ай бұрын
You have a sexy voice and i like watching a man work on cars
@jasonroberts2249Ай бұрын
BEWARE that there’s a good chance this bearing will be seized in the spindle. I wound up having to order the hub shocker tool, had to ream the holes with a dremel to make it fit, then had to wack it full strength with an 8lb sledge a dozen times before it came out. Personally I wouldn’t attempt this repair unless you already have the hub shocker tool, unless you’re ok with the loss of your vehicle for a week or so.
@bootlegengineer2367Ай бұрын
I love this series. I’m starting to build a house now and this is the grass I’m going to grow from seed. Thanks for posting all these videos.
@bootlegengineer2367Ай бұрын
Not that girl you dated in college haha
@user-wu5gg6wq5wАй бұрын
That's why i love my propane/gas generator i only run on propane.
@schickmannАй бұрын
Diesel fuel works great also.
@modeljetjuggernaut4864Ай бұрын
Sure the hell beats cuttin an old axle bearing and collar with a dotco on a 60s car and finding a blacksmith machinist in the dirty outskirts of town to press the new ones on...
@nightwalker3828Ай бұрын
How much trans fluid do you put in there?
@ExtremeRecluseАй бұрын
You can buy a stethoscope for checking this
@paulmaurice4491Ай бұрын
Stop using cheap ethanol based gas.
@lloydames87522 ай бұрын
bearing is now trash need to torque to spec for proper preload.
@Lordofjunk2 ай бұрын
this is a unit bearing, not a taper bearing. it does not require a preload procedure.
@timeforbigchange94172 ай бұрын
Just yesterday, I dropped by my Subaru dealer to ask them how much to do a wheel bearing. $650.oo / bearing. I also saw a mechanic using a 12 pound sledge to get a 2018 Crosstrek wheel bearing off I couldn’t believe it. The buildings cement floor was shaking. I have a 2012 Forester.
@donwest53872 ай бұрын
the bearing sure came out easy for you!
@squidtime122 ай бұрын
just got a pathfinder 1997 se. Was stoked on it then on the drive home got the wobbles. Super scary on my new offroader. hopefully after this fix i'll be happy about my purchase
@RJD03142 ай бұрын
Ive watched both of these videos on the long term storage. Great information. Thanks!
@G-regular5032 ай бұрын
Man the new foresters are easy.... 98 to 06 are super fun.... i wish they were that easy. I ended up replacing the whole knuckle. Lol.
@darthbram31632 ай бұрын
You had me at "hellacious."
@Tie_Rod_End2 ай бұрын
Great video! Do you think you send the link for where you got the parts
@scotsmanofnewengland77132 ай бұрын
Just replaced my crank shaft sensor and it was easy and the part only cost $44.00 at Auto Zone. 2013 Nissan Frontier with 97,300 miles
@cream69362 ай бұрын
What seed did you use and where do you live
@MiSa-yl1lj2 ай бұрын
Thank you for your videos
@christianfigueroa15172 ай бұрын
Connect sum pump wire to the motor leads and connect them to pressure switch
@carykane52193 ай бұрын
I wondering about the spark non fouler what brand as I need to do a complete system
@Starch1b2c3d4a3 ай бұрын
Did it solve your issue?
@Lordofjunk3 ай бұрын
it did not. subaru ended up installing a new CVT under warranty after this.
@Starch1b2c3d4a3 ай бұрын
@@Lordofjunk nice
@hartmancdh3 ай бұрын
Can this be done on a 2006 Forrester of the rear? People are saying it’s a different bearing for the rear because there’s drum brakes?
@sulimanorlanes81673 ай бұрын
i have a 2t motorcycle. i try to standby it with more 2t oil, it still goes bad. the settings still clog up. now I will observe the ATF oil now. but I think it is the perfect receipt for it to not destroy the carbs.
@DJFOXWILL3 ай бұрын
What would you say the quality of that TIMIKN Bearing was, or is?
@Lordofjunk3 ай бұрын
2 years and 30k miles later I have had zero issues with the bearings. I would say good quality.
@kanwaljeetsahota63163 ай бұрын
using ATF is really a old and authentic knowledge.....
@user-jj3cc2zp2p3 ай бұрын
That's pretty dam cool have to try it out Wonder if it will work on chainsaw
@sabastianevans26563 ай бұрын
You wouldn't by chance have come across issues with your radio on your r50? I've noticed if you want to upgrade your speakers you have to bypass your factory amps and I'm not entirely sure if you have had to do the same thing
@Lordofjunk3 ай бұрын
that pathfinder had a aftermarket head unit installed when I bought it and I never had to touch anything to do with the stereo.
@limitlesschoices3 ай бұрын
I'm in the charlotte area what grass seed should I go with? I want green all year long.
@Lordofjunk3 ай бұрын
the spf 30 bluegrass is awesome. I can't recommend it enough. I've had it for 2 seasons now, and it stays green all year.
Пікірлер
Damn when i picked mine up after ida i used synthetic atf because it's all i could find i guess imma find out if it's ok
What are your thoughts on replacing the cam sensors also?
No corn gas folks. Please listen 😊
People just don’t understand that they have to take care of equipment and service it often 😢😢😢
Can't find these kits. where did you get them? GREAT VID THANKS ! !
rockauto has them
How did the grass turn out??
Thanks bro.
I just asked someone how I should store my new generator he said to let run out with seafoam. Any thoughts?
I only use ethanol-free gasoline with stabil. It easily stays good for 24 months. I never plan for storing my generator. How do I know if hurricane come next year, or may I need to use it even earlier? Only when not used for 2 years then I take actions. First I drain the fuel tank. I drain it from the top with a hose (I don't like disconnecting fuel line, it's connected so tight I'm afraid I will struggle to reconnect it). Then I add fresh gasoline (ethanol-free with stabil, of course). Then I run the generator for at least 20 minutes to make sure the old gasoline in carburetor and fuel line get burned out. Now it can wait another 2 years. The old gasoline drained from the generator goes to my jeep's tank.
My '06 Pathfinder is throwing the same code P0335, but additionally 2 other codes also: P0021 and P0022, but not the symptoms you're having.. any ideas what else besides this sensor, will i need to replace..? Thanks in advance!
This guy knows / strait edge and center dot for TDC rotor ....right on Brother
Don’t forget a head lamp handy. I swear I did this to my generator when you did the first vid 3 pulls smoke fart boom. Thanks
I ware a cap light all the time, as a life time mechanic it’s just handy 😮
Great video. I was wondering if there were torque specifications for the 4 rear mounting bolts or for the main hub nut on the front? I recently had to have a the LR bearing replaced. I suspected it was the bearing, but I wasn't sure. As far as the sound, I would describe it as if you were flying a single-engine airplane or something. Definitely a grindy-type noise. I wonder if this is some kind of design or manufacturing problem? I was in the shop (again) a few weeks later for an intermittent ignition problem, and there was a customer in the waiting room who had two bearings go on her at once.
Do you do anything with Harbor Freight predator generators?
So I went to check my wheel bearings like you did. I jacked my car and had all 4 tires off the ground. Turned my car on. Put in in drive but only my passenger front tire would turn. My rear driver side turned for 5 minutes and I could hear the roaring from that tire but not the front. The driver front and passenger rear would not turn. Even if I turned them they would stop. After the 5 minutes the driver side rear tire quit spinning. The only one spinning, and stayed spinning, was the front passenger. The driver side front tire wanted too but wouldnt(you could see small jerking forward movements). I'm confused why they wouldn't spin. Once I lowered my car I got in and noticed 6 dash lights came on (check engine, AT temp oil, abs, hill start assist, traction warning, and my cruise control symbol flashes on and off). Now I'm really lost lol I didn't take anything apart
Hola, alguno logro instalar el distribuidor de la primera generación de Pathfinder vg30, en esta que seria la vg33?
You have a sexy voice and i like watching a man work on cars
BEWARE that there’s a good chance this bearing will be seized in the spindle. I wound up having to order the hub shocker tool, had to ream the holes with a dremel to make it fit, then had to wack it full strength with an 8lb sledge a dozen times before it came out. Personally I wouldn’t attempt this repair unless you already have the hub shocker tool, unless you’re ok with the loss of your vehicle for a week or so.
I love this series. I’m starting to build a house now and this is the grass I’m going to grow from seed. Thanks for posting all these videos.
Not that girl you dated in college haha
That's why i love my propane/gas generator i only run on propane.
Diesel fuel works great also.
Sure the hell beats cuttin an old axle bearing and collar with a dotco on a 60s car and finding a blacksmith machinist in the dirty outskirts of town to press the new ones on...
How much trans fluid do you put in there?
You can buy a stethoscope for checking this
Stop using cheap ethanol based gas.
bearing is now trash need to torque to spec for proper preload.
this is a unit bearing, not a taper bearing. it does not require a preload procedure.
Just yesterday, I dropped by my Subaru dealer to ask them how much to do a wheel bearing. $650.oo / bearing. I also saw a mechanic using a 12 pound sledge to get a 2018 Crosstrek wheel bearing off I couldn’t believe it. The buildings cement floor was shaking. I have a 2012 Forester.
the bearing sure came out easy for you!
just got a pathfinder 1997 se. Was stoked on it then on the drive home got the wobbles. Super scary on my new offroader. hopefully after this fix i'll be happy about my purchase
Ive watched both of these videos on the long term storage. Great information. Thanks!
Man the new foresters are easy.... 98 to 06 are super fun.... i wish they were that easy. I ended up replacing the whole knuckle. Lol.
You had me at "hellacious."
Great video! Do you think you send the link for where you got the parts
Just replaced my crank shaft sensor and it was easy and the part only cost $44.00 at Auto Zone. 2013 Nissan Frontier with 97,300 miles
What seed did you use and where do you live
Thank you for your videos
Connect sum pump wire to the motor leads and connect them to pressure switch
I wondering about the spark non fouler what brand as I need to do a complete system
Did it solve your issue?
it did not. subaru ended up installing a new CVT under warranty after this.
@@Lordofjunk nice
Can this be done on a 2006 Forrester of the rear? People are saying it’s a different bearing for the rear because there’s drum brakes?
i have a 2t motorcycle. i try to standby it with more 2t oil, it still goes bad. the settings still clog up. now I will observe the ATF oil now. but I think it is the perfect receipt for it to not destroy the carbs.
What would you say the quality of that TIMIKN Bearing was, or is?
2 years and 30k miles later I have had zero issues with the bearings. I would say good quality.
using ATF is really a old and authentic knowledge.....
That's pretty dam cool have to try it out Wonder if it will work on chainsaw
You wouldn't by chance have come across issues with your radio on your r50? I've noticed if you want to upgrade your speakers you have to bypass your factory amps and I'm not entirely sure if you have had to do the same thing
that pathfinder had a aftermarket head unit installed when I bought it and I never had to touch anything to do with the stereo.
I'm in the charlotte area what grass seed should I go with? I want green all year long.
the spf 30 bluegrass is awesome. I can't recommend it enough. I've had it for 2 seasons now, and it stays green all year.
Don't cut below 3 inches.
all the way to the top for me. 4+ inches
I use clay breaker to amend my clay soil.
No one likes a dirty squatter! 😂