Пікірлер

• 
  @Chubbydippin7 күн бұрын

  Thankyou great info here. Curious, does having a tow hitch installed on your Mazda 3 void any kind of power train, transmission or suspension warranty coverage?

• 
  @wrenchandrip5 күн бұрын

  I don’t think it would. The care is rated and approved for a specific amount of tongue and towing weight. As long as you stay within the manufacturer guidelines I assume it would be fine!

• 
  @newteripinАй бұрын

  Good job !! You have a future in the metal trades !

• 
  @wrenchandrip5 күн бұрын

  Thanks!

• 
  @newteripinАй бұрын

  Get your gas can out of the area, way out !!

• 
  @ThePapabear1970Ай бұрын

  spatter or bb(s) you can decrease wire speed or increase voltage. make sure materials clean, which yours looked clean in video,, invest in shielding gas, and spray with anti spatter, as old as the video is youve probably mastered this .. but good work!

• 
  @wrenchandripАй бұрын

  Thanks!

• 
  @shawcobraАй бұрын

  Do you tow your atv on highways? Or do you avoid highways and take city streets.

• 
  @wrenchandripАй бұрын

  I take highways also. I have towed it on a 5 hour trip to upstate NY, cruising 80mph without issue

• 
  @waydweaver7596Ай бұрын

  Any updates?

• 
  @wrenchandripАй бұрын

  I ended up swapping in a predator and selling it

• 
  @MrGmooneyАй бұрын

  My 2004 Honda ATV starts but wont run properly,keeps cutting out when you try to drive in first gear.strange it will move in reverse. Any suggestions?

• 
  @SamuelLeon-ld5guАй бұрын

  Nice job

• 
  @mygmail5016Ай бұрын

  vs the peugeot 103 this is very heavy , how do i know this , all my relatives had either one of these two and guess who was stealing them for a ride while they visited my parents back in the 90s it was mostly acceptable to see a 13 boy going around with one of these no one reports you as long as you don't look like trouble

• 
  @potayloАй бұрын

  any idea what the TONGUE weight of your trailer with your quad loaded?

• 
  @wrenchandripАй бұрын

  I would estimate about 150lbs tongue weight

• 
  @potayloАй бұрын

  @wrenchandrip OK, thanks I would guess you have a lot of weight over the trailer axel then. thank you.

• 
  @freddiemaurer35222 ай бұрын

  We would be good friends and no mosquitoes for miles around..😁👍

• 
  @luisbanales89102 ай бұрын

  What hitch do you have on it man?

• 
  @wrenchandrip2 ай бұрын

  It is a torklift ecohitch

• 
  @ronwitt12 ай бұрын

  Its a 97. 98 was blue. 97 was teal. I know I had one.

• 
  @emptyb99682 ай бұрын

  Looks great. Love the stress testing.

• 
  @glenmallory99822 ай бұрын

  These were a good sled new. Problem was new was about 20 years ago. You are going to have go through that sled like Grant took Richmond to get it back to good again.

• 
  @smoknloudbluntsslb33852 ай бұрын

  Thanks brother !!!! GOD bless you thank you for being you 💪🏼

• 
  @trentlorraine78862 ай бұрын

  There’s hope for the younger generation, nice job, I really appreciate all the safety gear, boots not sliders like most nowadays, especially while grinding and welding, long sleeves, pants, safety glasses, welding gloves. Keep up the great work, Thanks for showing how to be safe.

• 
  @wrenchandrip2 ай бұрын

  Thank you!

• 
  @shaneodom65743 ай бұрын

  I am installing a trailer hitch myself on my camry this weekend. I have a small stick steer boat with 25 horse mercury on it. I was gonna wait till I get a truck to go fishing in a couple of months, but why Waite? I'm ready to fish now. Only towing it about 10 miles round trip, hope this don't mess my car up.

• 
  @wrenchandrip3 ай бұрын

  It should be totally fine. Go show all the guys at the boat ramp who is boss! LOL

• 
  @EverettMiller-fl1zv3 ай бұрын

  If your interested in a trade i have a 1967 volvo 122 motor runs good

• 
  @robertluisb.92873 ай бұрын

  Good try for a beginner

• 
  @wrenchandrip3 ай бұрын

  thanks!

• 
  @deanallen38263 ай бұрын

  I need the chain cover

• 
  @carloseduardo-kv8kj3 ай бұрын

  Qual tamanho da largura do kart

• 
  @papapsych27463 ай бұрын

  How bad was the weld distortion? I was thinking maybe this was doable with wax coated stick rods and submerged in water to prevent any distortion.

• 
  @wrenchandrip3 ай бұрын

  Not bad at all, hub stayed almost perfectly straight

• 
  @stevejoos89533 ай бұрын

  Welding with GAS CANS in the background ???? Plus with no ventilation ? You kids need to grow up and get some sense in you.

• 
  @wrenchandrip3 ай бұрын

  I guess we succeeded in making welders mad! LOL

• 
  @meagain84034 ай бұрын

  All these lines...imma go do a line too....n i dont have a welder 😅😂

• 
  @wrenchandrip3 ай бұрын

  lol

• 
  @jonbardell70794 ай бұрын

  😆 'promosm'

• 
  @yeahokyep4 ай бұрын

  Great video W&R! I have a 2022 Mazda3 sedan and after spending some time in the Sierra Nevada last year, I decided that I'd love to have a SxS or a cheaper sporty ATV. Now I know that it's possible to tow without needing a CX-30😃 You definitely have more know-how than I do though so I hope you don't mind flying out to California to do the necessary modifications for me:D I'll put you up in the finest Motel6 one can find😄 I'm assuming the hitch is a 1/4"?

• 
  @wrenchandrip4 ай бұрын

  Thanks! Yes, I chose the 1 1/4 hitch for my car so it is less visible when not towing. Send over the flight info and Ill be out there! LOL

• 
  @Chewy_GarageBandDad4 ай бұрын

  Reverse the poles. it will fix that splatter. Reverse polarity.

• 
  @wrenchandrip4 ай бұрын

  Thanks!

• 
  @renemacao93494 ай бұрын

  Welding that axel without removing the motor is ok right? The electric current wont run through the metal into the motor? Sorry im a noob lol

• 
  @wrenchandrip4 ай бұрын

  I have heard of that being a risk for complex computerized vehicles, but only if you have the ground on the other side of the car or something (forcing it to travel through the car and electronics). On a go kart i think you are pretty much good to go!

• 
  @Have.An.AmicoDay21 сағат бұрын

  @@wrenchandrip I think he was talking about the gasoline exploding...

• 
  @Jess-on9kb4 ай бұрын

  *Promo SM* ✔️

• 
  @georgejonesjr59314 ай бұрын

  That's so cute

• 
  @wrenchandrip4 ай бұрын

  Little trailer for a little car

• 
  @johninmontana58474 ай бұрын

  I may have be moving from Chattanooga to either Phoenix or Eastern NC which is about 1800 miles to Phoenix and about 600 to NC. I too have a standard in my '18 3 Touring with the 2.5l. Would you theoretically say that I could haul a trailer of that size with some totes that are lighter, leaving the heavier stuff in the car with me? Any advice would be appreciated!

• 
  @johninmontana58474 ай бұрын

  Haha I forgot that I has already commented on this video from last year...

• 
  @wrenchandrip4 ай бұрын

  Yeah definitely. I would actually recommend putting more of the heavy items on the trailer rather than in the car. Let the trailer carry most of the weight so the car suspension isnt as compressed. Hope that helps!

• 
  @roastbeef77124 ай бұрын

  Such a beautiful mobylette! Had one myself but in green

• 
  @wrenchandrip4 ай бұрын

  Thanks!

• 
  @wrenchandrip4 ай бұрын

  Awesome!

• 
  @commonsense54894 ай бұрын

  Motorcycle is an over statement. This is an original moped🧐motor+pedal =moped

• 
  @wrenchandrip4 ай бұрын

  I would argue all mopeds are a type of motorcycle, but not all motorcycles are mopeds. Similar to all squares are rectangles but not all rectangles are squares

• 
  @commonsense54894 ай бұрын

  @@wrenchandrip well legally and technically they are completely different from motorcycles. An argument based on opinion is a dispute. An argument based on facts is a debate. I don’t set the state laws on what makes a motorcycle a motorcycle but I do know a moped is a motorized pedal “bicycle”. Legally and technically that is😎

• 
  @stephensellers24534 ай бұрын

  I work on these things for a living and I can tell you if it's been set in 20 years no way it's going to crank up without having the carburetor cleaned out and all the dead gas drained out of it at minimum

• 
  @ShawnStafford-19784 ай бұрын

  Agree with you.

• 
  @seenoevil18114 ай бұрын

  It literally says #restoration.... he rebuilt and is just excited to hear it crank my guys.

• 
  @ShawnStafford-19784 ай бұрын

  @@seenoevil1811 Not really. #restoration is a Hashtag for the search word. I use #reaction #challenge for my uploads. Even though it's a different kind for both.

• 
  @wrenchandrip4 ай бұрын

  I did pour in some new gas at least, the tank was empty

• 
  @josephbelsito84694 ай бұрын

  Moped I had one years ago

• 
  @wrenchandrip4 ай бұрын

  Awesome!

• 
  @katdaddy732124 ай бұрын

  It's the best moped ever built. Motobecane.

• 
  @wrenchandrip4 ай бұрын

  True that!

• 
  @Dawnzyxio144 ай бұрын

  Why not Puch? 😭

• 
  @martinmoore53354 ай бұрын

  Not motorcycle , it's a moped

• 
  @wrenchandrip4 ай бұрын

  The origin of the motorcycle started with a simple motorized bicycle (a moped), one could argue that a moped is in fact a motorcycle in its simplest form.

• 
  @carloseduardo-kv8kj5 ай бұрын

  Could you tell me the measurements of your gokart because I've asked other people but they haven't said anything.

• 
  @wrenchandrip5 ай бұрын

  About 4 foot long, 3 ft wide

• 
  @TunnelerEditz2 ай бұрын

  I have the exact same go kart

• 
  @carloseduardo-kv8kj5 ай бұрын

  What size axle

• 
  @wrenchandrip5 ай бұрын

  1 inch

• 
  @carloseduardo-kv8kj5 ай бұрын

  ​@@wrenchandripThank you very much my friend

• 
  @carloseduardo-kv8kj5 ай бұрын

  What is the size of your kart?

• 
  @wrenchandrip5 ай бұрын

  Kids kart, only about 4ft long

• 
  @wrenchandrip5 ай бұрын

  Kids kart, only about 4ft long

• 
  @carloseduardo-kv8kj5 ай бұрын

  Kart size?

• 
  @wrenchandrip5 ай бұрын

  Kids kart, only about 4ft long

• 
  @carloseduardo-kv8kj5 ай бұрын

  ​@@wrenchandrip1'20 long wide you can tell me if I don't mind bothering you

• 
  @wrenchandrip5 ай бұрын

  Will it start? See video linked below!

• 
  @youtubeisfullofspam70685 ай бұрын

  Right on dude Saving money is always nice

• 
  @wrenchandrip5 ай бұрын

  Yes sir!

• 
  @tharanmansell51545 ай бұрын

  Different speed models. All were 50cc

• 
  @wrenchandrip5 ай бұрын

  Good insight, thanks

• 
  @brymiddlemiss665 ай бұрын

  I feel like the power valves being wide open has something to do with it

• 
  @wrenchandrip5 ай бұрын

  Youre probably right

• 
  @highflyer74166 ай бұрын

  THE BROS GOT YOU

• 
  @wrenchandrip6 ай бұрын

  LOL

• 
  @RyanDunn-ce5zo6 ай бұрын

  I got the same carrrtttt

• 
  @wrenchandrip6 ай бұрын

  Awesome!

• 
  @andyboerst17876 ай бұрын

  Stator is toast. Has 2 coil circuits. The high rpm coil is toast but low speed coil is still allowing it to run.

• 
  @wrenchandrip6 ай бұрын

  Good tip, thanks!

• 
  @franklyspeaking83356 ай бұрын

  I’m a huge fan of Lost Trails. Great times with great people. Hate that we got no places to ride in the Hudson Valley

• 
  @wrenchandrip5 ай бұрын

  Yeah its tough to find places to ride!