The WinEMP software itself will be of no use to you, because you do not have the license, which is located in the interface.
@freedomandjustice8778 Жыл бұрын
Hi Heno, I heard that there is a Acces Level 15, is that correct?? or only Acces Level 9 ??
@heno_3098 Жыл бұрын
This person, let should send a photo of license autorizations WinEMP who did you hear it from. As for WinEMP, I don't think that's true, but maybe he knows something that I don't. If it is really the case that it can show level 15 on WinEMP, then I want to see and test it.
@yanraqui7692 Жыл бұрын
Hello, where can I find the hardware to program my Nrig46 to accept tokens?
@heno_3098 Жыл бұрын
Read the entire header of the video and you will also find a link where you can order it and also my e-mail, because of course it will be cheaper outside of ebay. Read the entire header of the video and you will also find a link where you can order it and also my e-mail, because of course it will be cheaper outside of ebay.
Hi, I need a programmer for my G40. Do you have it?
@heno_30982 жыл бұрын
Email me at [email protected] and send photos of what your G-40 looks like.
@freedomandjustice87782 жыл бұрын
i have the Software WINEMP Version 2.08 than i need only your Box??? Or i need the your Software ??
@heno_30982 жыл бұрын
You need only my box because it works with any version of WinEMP for the types of validators that WinEMP supports ...
@beitahk2 жыл бұрын
Have you programmer for ser3/sr3i and sr5/sr5i
@heno_30982 жыл бұрын
No
@ja-zacarwash20172 жыл бұрын
Zdravim ako sa da s vami spojit?
@heno_30982 жыл бұрын
odpovedal som na e-mail a nič :)
@danielfarkas63343 жыл бұрын
Hello! Great video thanks! Do you know where can i download this software?
@Antonio-oq2vz5 ай бұрын
hi!, have you found any link to this?
@heno_309811 күн бұрын
@@Antonio-oq2vz What's the point of downloading software that doesn't work without a dongle? The point of my product, which is a replacement for the original, is that I created not only connecting cables to different types of coin acceptors, but also created a replacement for the dongle that is built into the interface board that I offer, and then of course it makes sense to download the software, either from me or elsewhere.
Hello i m Stefan can you send me please your phone nr., via email
@heno_30983 жыл бұрын
Ok I'll send.
@heno_30983 жыл бұрын
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
@heno_30983 жыл бұрын
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
@heno_30983 жыл бұрын
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
@heno_30983 жыл бұрын
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
@heno_30983 жыл бұрын
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
@heno_30983 жыл бұрын
I note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which the manufacturer of validator also counts on, and of course with the original plastic, it also works only in a vertical position.
@xui43 жыл бұрын
Idk what to say
@heno_30983 жыл бұрын
It depends on whether you understand it or not and whether you are solving some problem with it or you just curious.
@xui43 жыл бұрын
@@heno_3098 idk
@heno_30983 жыл бұрын
@@xui4 ?
@michaelsimpson66033 жыл бұрын
Looks great, how are you getting on with later type coin devices, Falcon and Colibri, will Eagle be possible?
@heno_30983 жыл бұрын
Not all things have arrived yet so that I can start trying to break the coding, but I expect to solve it sometime next year. As soon as I make a prototype, I will write a comment here.
@heno_30983 жыл бұрын
Yesterday I successfully tested working with G-10 and G-26 via KUNEMP and WinEMP.
@tecfreaky3 жыл бұрын
What is inside in the box?
@heno_30983 жыл бұрын
@@tecfreaky Do you want an exact technical description or photos?
@heno_30983 жыл бұрын
@@tecfreaky ???
@tecfreaky3 жыл бұрын
@@heno_3098 im looking for a programming Adapter for coin validator with kunemp interface ist can built myself if i have a circuit diagramm.
@heno_30983 жыл бұрын
@@tecfreaky There are several types of validators with different types of connections for KUNEMP via RS-232 on PC. In the box, everything is combined with the MCU and the license card for WinEMP. If you just need to build an interface for KUNEMP, then you do not need a this box, but I need to know what type of validators you want to connect, because the interface scheme changes accordingly. And of course for KUNEMP it is suitable to use an old PC with original COM serial ports and MS-DOS or Windows 3.1 or 3.11 OS, because the USB to RS-232 converter works with newer windows, but the problem is stability of KUNEMP on the Windows 7 and higher. You can use a dosbox program or oracle OS emulator for this, but the USB to COM converter has problems there. I have all the software.
@heno_30983 жыл бұрын
Yesterday I successfully tested the work of the G-40.4000 (G-46 with a coin issuer).
@heno_30983 жыл бұрын
New news: Today the KUNEMP program was successfully tested with my BOX.
Пікірлер
How can I download this software?
Which software?
Hallo. Können Sie Ihre kontact geben?
[email protected]
Do someone have a link to the software tools?
The WinEMP software itself will be of no use to you, because you do not have the license, which is located in the interface.
Hi Heno, I heard that there is a Acces Level 15, is that correct?? or only Acces Level 9 ??
This person, let should send a photo of license autorizations WinEMP who did you hear it from. As for WinEMP, I don't think that's true, but maybe he knows something that I don't. If it is really the case that it can show level 15 on WinEMP, then I want to see and test it.
Hello, where can I find the hardware to program my Nrig46 to accept tokens?
Read the entire header of the video and you will also find a link where you can order it and also my e-mail, because of course it will be cheaper outside of ebay. Read the entire header of the video and you will also find a link where you can order it and also my e-mail, because of course it will be cheaper outside of ebay.
Hello i Need this Box what Cost it ?
Write on my e-mail ([email protected]).
Hello, how much does your Box cost please
via ebay or direct order?
the case and supplied with the Software
I replied to your e-mail.
@@heno_3098 thank you
Hi, I need a programmer for my G40. Do you have it?
Email me at [email protected] and send photos of what your G-40 looks like.
i have the Software WINEMP Version 2.08 than i need only your Box??? Or i need the your Software ??
You need only my box because it works with any version of WinEMP for the types of validators that WinEMP supports ...
Have you programmer for ser3/sr3i and sr5/sr5i
No
Zdravim ako sa da s vami spojit?
odpovedal som na e-mail a nič :)
Hello! Great video thanks! Do you know where can i download this software?
hi!, have you found any link to this?
@@Antonio-oq2vz What's the point of downloading software that doesn't work without a dongle? The point of my product, which is a replacement for the original, is that I created not only connecting cables to different types of coin acceptors, but also created a replacement for the dongle that is built into the interface board that I offer, and then of course it makes sense to download the software, either from me or elsewhere.
very useful to have for testing.
Great demo, how much for unit complete?
[email protected]
This guy knows these devices better than anybody on the planet
I will only modestly say that I know some things from it :)
[email protected]
Hello i m Stefan can you send me please your phone nr., via email
Ok I'll send.
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
Over the weekend, I successfully tested the conversion of the G-13mft casino to the Vending version of the G-13mft using plastic, which I drew myself and printed on a 3D printer. Who would like to see this here: www.ebay.com/itm/174527277857 and a video of how it works is here: kzread.info/dash/bejne/Zp54ypZqfq_Xe6Q.html Please note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which is what the validator manufacturer counts on, and of course the original plastic also works only in a vertical position.
I note that the validator is originally a version of the casino converted to vending using conversion plastic printed on a 3D printer. As you can see, everything works properly if the validator is in a vertical position, which the manufacturer of validator also counts on, and of course with the original plastic, it also works only in a vertical position.
Idk what to say
It depends on whether you understand it or not and whether you are solving some problem with it or you just curious.
@@heno_3098 idk
@@xui4 ?
Looks great, how are you getting on with later type coin devices, Falcon and Colibri, will Eagle be possible?
Not all things have arrived yet so that I can start trying to break the coding, but I expect to solve it sometime next year. As soon as I make a prototype, I will write a comment here.
Yesterday I successfully tested working with G-10 and G-26 via KUNEMP and WinEMP.
What is inside in the box?
@@tecfreaky Do you want an exact technical description or photos?
@@tecfreaky ???
@@heno_3098 im looking for a programming Adapter for coin validator with kunemp interface ist can built myself if i have a circuit diagramm.
@@tecfreaky There are several types of validators with different types of connections for KUNEMP via RS-232 on PC. In the box, everything is combined with the MCU and the license card for WinEMP. If you just need to build an interface for KUNEMP, then you do not need a this box, but I need to know what type of validators you want to connect, because the interface scheme changes accordingly. And of course for KUNEMP it is suitable to use an old PC with original COM serial ports and MS-DOS or Windows 3.1 or 3.11 OS, because the USB to RS-232 converter works with newer windows, but the problem is stability of KUNEMP on the Windows 7 and higher. You can use a dosbox program or oracle OS emulator for this, but the USB to COM converter has problems there. I have all the software.
Yesterday I successfully tested the work of the G-40.4000 (G-46 with a coin issuer).
New news: Today the KUNEMP program was successfully tested with my BOX.