Пікірлер

• 
  @savagewolf19663 күн бұрын

  You do good work,better than cheap store brought 😊

• 
  @addforging3 күн бұрын

  I made this set to order, I decided to make a review. Very massive and strong. Handmade. Thanks

• 
  @savagewolf19663 күн бұрын

  Wow,never seen this type of seasoning,looks like it works great 👍 Thank you for your secret 🎉

• 
  @addforging3 күн бұрын

  Thank you. This is an old technology, it is not always done correctly, I decided to film it as it should be. Often the oil was replaced with pig fat

• 
  @savagewolf19663 күн бұрын

  Nice job, looks like you could cook a lot on one of those.,did you buy the peices that the legs screw into,I have never seen them before.do you know what they are called?I would like to try and make one myself.🙌🤔👊

• 
  @addforging3 күн бұрын

  Thank you. Yes, you can cook anything for 6-8 people on this frying pan. Also, the frying pan is 6 mm thick. I made these cylindrical nuts for an old project. Thread M10, I also have M12. They are made from a solid metal rod on a lathe.

• 
  @kimnielsenthewordyvikingett1593 күн бұрын

  Absolutely awesome disk harrows are normally pretty thick if for deep disking and a bit larger but that'll work just fine excellent 👌 idea young 🌱 man!!!! The only thing I'm thinking 🤔 might be a subject is there's no flat spot but that can easily be taken care of with a large cherry 🌸 torch and a large hammer ⚒️!!!! Always a pleasure thanks for sharing!!!!!

• 
  @addforging3 күн бұрын

  Glad to see you! Yes, that's right, it's quality steel and 6 mm thick. The flat bottom is for an amateur and if you need to fry pancakes. But it's a matter of taste. The frying pan is made from a harrow disk, you can pass it on as an inheritance. Thanks

• 
  @y-notforge89133 күн бұрын

  ..Good job sir! for a moment i thought you were going to make the handles out of the disk teeth. that ought to fry your chicken...

• 
  @addforging3 күн бұрын

  @@y-notforge8913 Glad to see you. I thought about making handles from the teeth of the disk, but the handles are very thin and I already have a plan for these harrow teeth

• 
  @savagewolf19665 күн бұрын

  Very nice work, should work great, would like to see it in use🤔🔥🙌

• 
  @addforging4 күн бұрын

  I think I'll cook something soon. There will also be a few grill options.

• 
  @y-notforge89137 күн бұрын

  ..a Very good build sir. it ought to last a good while...

• 
  @addforging6 күн бұрын

  Thank you. It can withstand a weight of 150 kg well. If you take a pipe 50x50x3 mm and more, it can withstand more.

• 
  @y-notforge891313 күн бұрын

  ..Well done sir! i do like the brass spinners better than the stainless ones. let us know how many fish you get with it...

• 
  @addforging13 күн бұрын

  Thank you. I like it too. We have good pike fishing on copper spinners. I'll let you know, I want to test it in 2 weeks

• 
  @gvozd12616 күн бұрын

  На прихватка не хочешь проверить? На горячую не открывай¡а где смазка?? Прихватятся !!

• 
  @addforging16 күн бұрын

  Lubrication inside the welded hinges, oil stains are visible on the video. Before fully welding the hinges, we opened and checked, everything is fine

• 
  @MNpicker17 күн бұрын

  Nice...😎

• 
  @addforging16 күн бұрын

  Yes))

• 
  @TheRealestBubby17 күн бұрын

  Very cool build! just a metal band and rivets instead of paracord, add a handle, and you got yourself a Viking beer mug

• 
  @addforging17 күн бұрын

  It would be possible to make a handle, but that would be a different project. The idea is to make a regular cup with a minimum of tools.

• 
  @huxmetalworks737117 күн бұрын

  Great job love the idea what did you use to seal it thanks for sharing

• 
  @addforging17 күн бұрын

  @@huxmetalworks7371 Inside is heated 100% beeswax. I took it from my friends apia.

• 
  @user-wv2ll5wh3j18 күн бұрын

  Налей туда чайку..

• 
  @addforging18 күн бұрын

  Tea...mmmmm)))

• 
  @juanadolfocr383219 күн бұрын

  Me gusta tu idea

• 
  @addforging19 күн бұрын

  🥰👍

• 
  @N0nexistentperson21 күн бұрын

  People are like pieces of a really big puzzle.they are all unique in their own way and one of a kind.But they are connected.And when they connect they are a masterpiece You get underrated everytime but dont give up.I hope people see your struggle and hard work.take good care and i wish you find success

• 
  @addforging21 күн бұрын

  Thank you for your support))) Yes, it is difficult, but I think that my work will help people.

• 
  @kimnielsenthewordyvikingett15921 күн бұрын

  ​@@addforgingwhat's the stuff you grated????

• 
  @addforging21 күн бұрын

  @@kimnielsenthewordyvikingett159 beeswax

• 
  @PP-uv1kw21 күн бұрын

  looks&tastes like my little sisters mud pie ... she used old birds eggs & grass clippings too. & the best clay in the yard.

• 
  @addforging21 күн бұрын

  I would not like to try it))

• 
  @PP-uv1kw21 күн бұрын

  yup..... still tastes like my sisters mud pie.

• 
  @addforging21 күн бұрын

  No, it's not))) It looks like an omelette))

• 
  @kevinorr688023 күн бұрын

  I'm actually more interested in your kettle burner kit! Need a vid on that little gem.

• 
  @addforging23 күн бұрын

  Thanks! There are many videos about the stove on the channel, its operation and assembly. I have been using it a lot lately. It is also on sale. See here also @addforgingshortsua

• 
  @addforging23 күн бұрын

  youtube.com/@addforgingshortsua?si=IFzMd5pX37UkbLKZ

• 
  @addforging23 күн бұрын

  www.etsy.com/shop/bushcraftukraine/?etsrc=sdt

• 
  @addforging23 күн бұрын

  etsy.com/shop/bushcraftukraine/?etsrc=sdt

• 
  @kimnielsenthewordyvikingett15923 күн бұрын

  Use a plastic spoon so you don't crack the glass jar!!!! Then you can go crazy with the stirring!!!!!

• 
  @addforging23 күн бұрын

  ASMR spoons in a jar)))) Okay, I'll try not to forget

• 
  @johna.96823 күн бұрын

  I can might weld like a pro, but when it comes to stick, I suck shit at it. I seriously need to get my self more practice.

• 
  @addforging23 күн бұрын

  Practice is always good. You will succeed

• 
  @michaelgarner981624 күн бұрын

  Just a pity the actual welding wasn’t better

• 
  @addforging24 күн бұрын

  Why? Now the gates are painted and metal sheets are already screwed, everything is fine)

• 
  @21Airyk27 күн бұрын

  That is an interesting idea, never thought of that.

• 
  @addforging26 күн бұрын

  sometimes I use this idea of ​​mine if I need to make a small number of rivets

• 
  @honthirty_27 күн бұрын

  Why not MIG it, then peen over while it is hot?

• 
  @addforging27 күн бұрын

  the rivet cools down quickly, cleans it at the end or do you mean something else?

• 
  @MrOldclunker27 күн бұрын

  That is not a rocket stove. That is more like a beer can modification.

• 
  @addforging27 күн бұрын

  Fire beer can, new modification

• 
  @gaelpache677627 күн бұрын

  It looks pretty much like oe…

• 
  @MrOldclunker27 күн бұрын

  A little obsessed with augers? I see a lot of them, but no results of use. Shake it up a bit...no pun intended.

• 
  @addforging27 күн бұрын

  A small amount of screws and adapters. I shook it to show that it does not fall out of the adapter. The rest of the drilling depends on the drill

• 
  @TalRohan27 күн бұрын

  ooh direct heat water warmer..nice

• 
  @addforging27 күн бұрын

  Thanks. Yes, now there is a stove with water heating. They asked me to do it

• 
  @PP-uv1kw28 күн бұрын

  tastes better with lard ( or bacon )

• 
  @addforging28 күн бұрын

  You know a lot about these things 👍

• 
  @Rhdew3428 күн бұрын

  That looks delicious

• 
  @addforging28 күн бұрын

  Yes, healthy and tasty. This is traditional Ukrainian food

• 
  @kimnielsenthewordyvikingett15929 күн бұрын

  I'm guessing it's the one inch that's the most popular isn't it?????

• 
  @addforging29 күн бұрын

  So, in the video 1". But often they also take 30 and 40 mm. With the new assortment they are also looking at small sizes, 16 mm is popular

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @RSpice29 күн бұрын

  Wow! Where can you buy!?

• 
  @addforging29 күн бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @florinsavu140128 күн бұрын

  Any store that sells coffee and milk, no need to make 2 trips 😊😊

• 
  @addforging28 күн бұрын

  @@florinsavu1401 Most likely they asked for a small rocket stove 😁

• 
  @nenadnedovic9246Ай бұрын

  Where can I buy this.

• 
  @addforgingАй бұрын

  Shop www.etsy.com/au/shop/BushcraftUkraine

• 
  @addforgingАй бұрын

  Will be on sale this weekend and have a discount.

• 
  @nenadnedovic9246Ай бұрын

  Jesus I'm in Australia id have to hock my ass for postage lol.

• 
  @nenadnedovic9246Ай бұрын

  Do you sell the lazer drawing so I can have it cut myself.

• 
  @TalRohanАй бұрын

  very nice, I guess it was kind of a windy spot so could have been a bit awkward but it would have been cool to see it boiling some water in the cup...cool build I like it Thanks for sharing

• 
  @addforgingАй бұрын

  Thank you for your activity. Yes, there are big winds now. I plan to cook something on the stove and make coffee in a geyser.

• 
  @TalRohanАй бұрын

  @@addforging coffee in a geyser sounds like fun ..I'll look forward to that one lol cool idea

• 
  @user-jl1ds2ok7dАй бұрын

  И????

• 
  @addforgingАй бұрын

  Don't know what a review is?

• 
  @AlbertoHernandez-kf3cgАй бұрын

  Para mí debe ser una estufa de leña

• 
  @addforgingАй бұрын

  yes, rocket stove

• 
  @user-cp8iv6xh3xАй бұрын

  это что за бред?

• 
  @addforgingАй бұрын

  Чому?

• 
  @MrChrisHobdayАй бұрын

  Nice

• 
  @addforgingАй бұрын

  Constructor. After completion I will take a full photo with dimensions

• 
  @WOMOONSАй бұрын

  Good job man

• 
  @addforgingАй бұрын

  Thanks!👍After completion I will take a full photo with dimensions