WOW THANKS ALOT I REALLY NEED IT >> CAN WE USE IT?
@coffreedom92476 ай бұрын
of cause!🥰
@khaledmassarani65876 ай бұрын
Thanks @@coffreedom9247
@hp0dvd6 ай бұрын
👍🤟🤩
@user-wk4ff3bm2r8 ай бұрын
每年中秋烤爐都有新創意👍👍
@kafklatsch31988 ай бұрын
Excellent... suggestions.. the path up and down should be arcs insted of having corners (adds mechanical smoothness)....alsothe rest point "V" should be steeper on the in and out, but with the bottom slighlty offset so the unlatching movement remains correct (again for smoothness and durability as that flattened top of the exit area is stressing the Track pin ( pin moving in the path) more that necessarily.. just my observation of an all in all excellent mechanism and print
@spicyricecaker751410 ай бұрын
Thanks! Made understanding this mechanism a lot easier!
@matheusguedes8178 Жыл бұрын
Hello I need you help
@coffreedom9247 Жыл бұрын
What can I help you with?
@MrPrush-ji4gs Жыл бұрын
Where can I buy the code for the 3d print
@coffreedom9247 Жыл бұрын
This is for free. You can click on the link above.
@bethannesgarden Жыл бұрын
Thanks!
@GeoGott Жыл бұрын
Could I put in a stronger spring? i need something that could push up a flush door enough to get my fingers under. The push magnet ones are to week.
@officialcheatgreek Жыл бұрын
Is it possible to scale it smaller?
@Nobody_is_here50 Жыл бұрын
電力真的可以足夠充電嗎
@coffreedom9247 Жыл бұрын
這只是個模型而已😁
@jwonderfulsuccess Жыл бұрын
Good work. Keep it up
@bglive721 Жыл бұрын
那個點焊機感覺挺方便的 請問有相關資訊嗎?
@userou-ig1ze Жыл бұрын
i only print spaghetti, how did you print the long round sticks??
@coffreedom9247 Жыл бұрын
I printed with raft and support.
@slavomirmjakis3301 Жыл бұрын
what about push to open with softclose using small engine and batteries???
@NERO-ez1mn Жыл бұрын
can i know the model and brand of the laser cutting device?
@coffreedom9247 Жыл бұрын
Yes. Here: tw.flux3dp.com/beamo/
@shreyask2554 Жыл бұрын
may I know the pros and cons of this mechanism?
@coffreedom9247 Жыл бұрын
I think it's a good mechanism for applications like drawers. However, the pin connected to the route is the weakest part of the whole mechanism.
Hmm i could see this working with the AC hidden blade :p still very cool to see
@eutytoalba Жыл бұрын
🤫 "This isn't the droid you're looking for...."
@ericchou3 Жыл бұрын
有種東西叫手機
@coffreedom9247 Жыл бұрын
我們有自己的使用情境:比如放在不會只用手機的長輩家中,或是取下吸附在任何地方創造驚喜。
@danielarias8427 Жыл бұрын
amazing!!!
@brookejohnson2251 Жыл бұрын
What are the dimensions of the springs you used? Where did you get them?
@coffreedom9247 Жыл бұрын
The spring is 9*60 mm. I bought them at the spring shop.
@titouanlormeau3200 Жыл бұрын
hey , I just wanted to know, what is the best infill to print this model ? thank you
@coffreedom9247 Жыл бұрын
Theoretically, higher infill will work better. However, it'll take quite long to print it. I think 60% works fine.
@pixelrabbit261 Жыл бұрын
It looks like about 15-20%
@sssaaa159320 Жыл бұрын
讚讚
@sssaaa159320 Жыл бұрын
喜歡你的設計
@coffreedom9247 Жыл бұрын
謝拉!我有抖內設計圖,可以試試看,我用到現在還沒壞~
@sssaaa159320 Жыл бұрын
@@coffreedom9247 好喔~
@JoshuaRilliet Жыл бұрын
Hello, thank you for this video, I think it will do perfectly for one of my projects. I see you put a raft on for grip, could you tell me what slicer you used to have a raft that comes off so well, maybe even the settings you use to make them, because I'm using PrusaSlicer and so far my rafts don't come off as well as yours and I can't find a good setting, so if you don't mind sharing your settings that would be great. Thanks
@coffreedom9247 Жыл бұрын
I use CURA's default raft setting and it works just fine for me.
@JoshuaRilliet Жыл бұрын
@@coffreedom9247 Ok, I'll test the new version of Cura to see if I change my mind about this slicer, at worst I get the raft settings back 😉👍
@dylandreisbach19862 жыл бұрын
This is a great video. If anyone wants a more in depth description of the practical uses of this kind of mechanism and others like it, look up "PUSH LATCH Mechanism" by This Old Tony. He goes into depth about this style of mechanism and a few others that are used in cabinets and whatnot. Also it could be a great video to get ideas on other designs that could potentiall by 3d printed.
@kikook222 Жыл бұрын
Thanks for answering the question I had.
@gillsejusbates6938 Жыл бұрын
bruh i cant get that sausage out of my mind
@ashmcconnell38682 жыл бұрын
What bearing is used with this one?
@ashmcconnell38682 жыл бұрын
Found it on the thingiverse link above : "The bearing I used is the one in a fidget spinner. (Inside Diameter: 8mm, Outside Diameter 22mm, Thickness: 7mm. [608 bearing])"
@coffreedom92472 жыл бұрын
@@ashmcconnell3868 Yes!
@codychan9382 жыл бұрын
男主好帥
@user-dv6zs5tp5z2 жыл бұрын
+1
@astupido12 жыл бұрын
Perfecto, ahora solo necesito la maquina esa cortadora de metal/madera
Пікірлер
Wowww❤❤❤
How the latch goes always to the left and return from the right side?
That raft tho
檔案下載:www.thingiverse.com/thing:6562158
Supports?
Thank you for this idea.
Looks nice. What did you use to glue the parts ?
just general transparent and quick-drying adhesive for bonding plastic together!
@@coffreedom9247do you sand the parts before gluing them ? I have tried using super glue but it does not work all the time.
@@akshayksaini NO,I didn't. Maybe you could use colloidal and quick-drying adhesive to bond them.
昀彣的手😂😂🎉🎉
檔案下載:www.thingiverse.com/thing:6459495
檔案下載:www.thingiverse.com/thing:6497366
¿Y las medidas?
1.用wifi控制?也得ememo先連接上wifi 才能手機控制ememo顯示東西?所以應該是首先如何讓ememo連接wifi? 2.輕輕一碰更改畫面資料?也代表一開始要連接的網路資料?
是的!第一步即是讓ememo連接wifi!使資料能透過網路傳遞至ememo,不論是透過手機app欲呈現在ememo的畫面,或是即時天氣及股票資訊,皆須透過wifi更新資料。
問題沒看到線圈處?
這只是模型而已,未真正連接電線😅
檔案下載:www.thingiverse.com/thing:6464594
檔案下載 Download Files Here: www.thingiverse.com/thing:6449494 About us: Website: coffreedom.com/ Facebook: facebook.com/CoffreedomOfficial/ Instagram: instagram.com/coffreedom_offical/ Tiktok: www.tiktok.com/@coffreedom_offical
Hidden blade
Springlock
*Insert annoying chinese aliexpress music*
這邊購買:shp.ee/95zm67b
WOW THANKS ALOT I REALLY NEED IT >> CAN WE USE IT?
of cause!🥰
Thanks @@coffreedom9247
👍🤟🤩
每年中秋烤爐都有新創意👍👍
Excellent... suggestions.. the path up and down should be arcs insted of having corners (adds mechanical smoothness)....alsothe rest point "V" should be steeper on the in and out, but with the bottom slighlty offset so the unlatching movement remains correct (again for smoothness and durability as that flattened top of the exit area is stressing the Track pin ( pin moving in the path) more that necessarily.. just my observation of an all in all excellent mechanism and print
Thanks! Made understanding this mechanism a lot easier!
Hello I need you help
What can I help you with?
Where can I buy the code for the 3d print
This is for free. You can click on the link above.
Thanks!
Could I put in a stronger spring? i need something that could push up a flush door enough to get my fingers under. The push magnet ones are to week.
Is it possible to scale it smaller?
電力真的可以足夠充電嗎
這只是個模型而已😁
Good work. Keep it up
那個點焊機感覺挺方便的 請問有相關資訊嗎?
i only print spaghetti, how did you print the long round sticks??
I printed with raft and support.
what about push to open with softclose using small engine and batteries???
can i know the model and brand of the laser cutting device?
Yes. Here: tw.flux3dp.com/beamo/
may I know the pros and cons of this mechanism?
I think it's a good mechanism for applications like drawers. However, the pin connected to the route is the weakest part of the whole mechanism.
քʀօʍօֆʍ
下方爐頭 若用遠紅外線陶瓷爐頭會很棒 上面如果是放鐵板就會是鐵板燒若是石板就是石板烤肉若是鐵網就是傳統烤肉了 不錯 蠻棒的設計
Hmm i could see this working with the AC hidden blade :p still very cool to see
🤫 "This isn't the droid you're looking for...."
有種東西叫手機
我們有自己的使用情境:比如放在不會只用手機的長輩家中,或是取下吸附在任何地方創造驚喜。
amazing!!!
What are the dimensions of the springs you used? Where did you get them?
The spring is 9*60 mm. I bought them at the spring shop.
hey , I just wanted to know, what is the best infill to print this model ? thank you
Theoretically, higher infill will work better. However, it'll take quite long to print it. I think 60% works fine.
It looks like about 15-20%
讚讚
喜歡你的設計
謝拉!我有抖內設計圖,可以試試看,我用到現在還沒壞~
@@coffreedom9247 好喔~
Hello, thank you for this video, I think it will do perfectly for one of my projects. I see you put a raft on for grip, could you tell me what slicer you used to have a raft that comes off so well, maybe even the settings you use to make them, because I'm using PrusaSlicer and so far my rafts don't come off as well as yours and I can't find a good setting, so if you don't mind sharing your settings that would be great. Thanks
I use CURA's default raft setting and it works just fine for me.
@@coffreedom9247 Ok, I'll test the new version of Cura to see if I change my mind about this slicer, at worst I get the raft settings back 😉👍
This is a great video. If anyone wants a more in depth description of the practical uses of this kind of mechanism and others like it, look up "PUSH LATCH Mechanism" by This Old Tony. He goes into depth about this style of mechanism and a few others that are used in cabinets and whatnot. Also it could be a great video to get ideas on other designs that could potentiall by 3d printed.
Thanks for answering the question I had.
bruh i cant get that sausage out of my mind
What bearing is used with this one?
Found it on the thingiverse link above : "The bearing I used is the one in a fidget spinner. (Inside Diameter: 8mm, Outside Diameter 22mm, Thickness: 7mm. [608 bearing])"
@@ashmcconnell3868 Yes!
男主好帥
+1
Perfecto, ahora solo necesito la maquina esa cortadora de metal/madera