Leaf springs huh? Is that an option for the newer trucks? Or is this a 3500?
@MattCone-w8o5 күн бұрын
Where exactly did you mount your pcm under the dash. In the process of moving mine in the cab from under the hood and I'm also installing Vintage Air on my 86. Is there room above the Vintage Air unit?
@GreaseMonkeyTV5 күн бұрын
It's top center under the dash. Left of and above the VA unit
@Diesel_ftw6 күн бұрын
If you told us the brand and where to get the rock lights why not just link them in the description?
@GreaseMonkeyTV6 күн бұрын
Links expire on amazon and people gripe in the comments
@simbanugz29066 күн бұрын
When my 12 mustang 3.7 was n/a a circle D 3c (3000-3200) helped me go from 12.9 @108 to 12.5 @109 convertor only. Other then adding a pro charger nothing added more performance. Awesome video and sick truck. I have a old 1980 Silverado I just picked up. Going to watch all your videos
@robertomunoz3037 күн бұрын
What size drop u have and spindle
@Discoverchris7 күн бұрын
My boy, chewy 454 can port that thing for you you’ll get about 25 more horsepower
@susanhoskins52858 күн бұрын
💜✝️
@nickrodriguez3189 күн бұрын
Beautiful
@cheezitman99429 күн бұрын
should i get the ksc40s or the ksc35 cause its a 3.5 instead of a 4?
@GreaseMonkeyTV9 күн бұрын
3.5 if you don’t want to fab anything.
@RemusTheRegular10 күн бұрын
How's the turn radius on that monster? Curious as I'm looking at the same size ram.
@lincolnwagoner306411 күн бұрын
What shock tune is in the Kings?
@GreaseMonkeyTV11 күн бұрын
Carli spec
@staceyaustin206111 күн бұрын
Nice truck, what's the best way to get the chrome around the truck off put new on and the guy that put it on messed it up
@GreaseMonkeyTV11 күн бұрын
Pull it off, eraser wheel the leftover tape, install new from a roll. All available on Amazon. Use masking tape around the truck to line the new molding up where you like it.
@OverlandOrange12 күн бұрын
I'm searching for one of these to pull my squaredrop from the street, up my driveway into my garage.
@brent68ful12 күн бұрын
Did you use a 3.73 or 3.42 gear set? You stated 3.73, but part number in video is for 3.42. Either way are you happy with what you choose?
@GreaseMonkeyTV11 күн бұрын
I did use 3.73 and it’s perfect.
@dominiquehaines-86SquareBody15 күн бұрын
Nice
@juliansdiamonds15 күн бұрын
Very well explained !!!
@STEVEEDG15 күн бұрын
I installed that same converter in my stock 4l60e and fried the trans after a couple months probably because I had a 1/4 inch gap between converter and flexplate 😬.
@BrokenLuxury7775 күн бұрын
😮
@99tmsmith16 күн бұрын
turn out clean. looks alot better lowered
@MichaelChavez-g6u16 күн бұрын
How did you like the do things worry set up did everything work OK? I found him on Facebook. I just wanted to know if everything worked out good and what you had to do different to make it all work before I order it.
@Mark-sr3mk18 күн бұрын
I have a 16 ford 150 2.7 EcoBoost engine just wondering if there's something I can do with the torque converter in my truck to help it go faster do you know what I can do to the engine to make the it faster.speed wise?its all stock now from the factory
@GreaseMonkeyTV17 күн бұрын
Livernois Motorsports.
@cwavt884919 күн бұрын
Yep, like cops speeding like NASCAR to and from work, those with power most often abuse it
@goddessduncan389919 күн бұрын
The nerve!😂😂😂😂
@user-bm8cl6mc9o19 күн бұрын
It totally devalues the neighborhood with this junky looking half-assed projects.
@karlinharris182719 күн бұрын
Not much of a garage there, bud. Missing a wall and a roof
@g-man793820 күн бұрын
That is a goofy looking setup.
@bigtires10021 күн бұрын
Disappointed that you never filmed your tach when you tested the stall of the converter while motionless.
@timk285327 күн бұрын
Thanks for this ...I know its a couple years old...Just had exact issue on my 2006 Malibu boat trailer (boatmate brand)...locked up caliper pushed out my sight window piston just like you described. I did not know they did that. I had a caliper lock up about 7 years ago and ended up replacing it and rebuilding a couple of the others (4 brake system). I had kinda forgotten some of the steps so this was a nice refresher! Earned a new subscriber!
@GreaseMonkeyTV27 күн бұрын
Welcome to the gang!
@martinolivas31927 күн бұрын
I’m having issues finding why my factory climate control system constantly pulls in air from the engine bay. My Exaust is leak free, but at stop lights I pull in Exaust from the surrounding vehicles. Any advice would help
@GreaseMonkeyTV26 күн бұрын
Turning your air to recirculate uses only the interior air.
@Alec_Costa28 күн бұрын
I bought a 383 stroker from blueprint engines and had to buy a transmission so I got a th 350 from Facebook marketplace that came with a 9in coan tork converter 3800 stall cam speck is .544 Intake .555 Exhaust what you think about the 3800 stall for the engine? I’m new to this stall converter situation
@GreaseMonkeyTV28 күн бұрын
A lot depends on the weight of the car and where the power curve is in your engine. Drive it and see how you like it. Removing a TH350 is pretty simple.
@Alec_Costa28 күн бұрын
@@GreaseMonkeyTV peak torque is at 4400rpm and peak hp around 5500 and the car is a 1966 Pontiac lemans I believe it weighs around 3200lbs
@GreaseMonkeyTV28 күн бұрын
@@Alec_Costa Peak isn't so much a factor as the curve when you're street driving.
@kaydencrank29 күн бұрын
Just passed you on the highway and saw the yt name I was in the elite detailing truck
@GreaseMonkeyTV28 күн бұрын
Oh hey! Around the 96th street bridge?
@kaydencrank28 күн бұрын
Yep!
@ronniehoward2129Ай бұрын
Never would have known they were the bypass valve for purging. Thought they were just for moving mower when not running.
@handyrandysgarage6929Ай бұрын
I have close to the same set up as you. I’m having a issue of the idle rpm dropping so low sometimes at a stop light that it kills the engine when the ac clutch cycles. Did you do anything to bump up the idle when it cycles?
@GreaseMonkeyTVАй бұрын
Your tuner should be able to fix that.
@Avalanche2Ай бұрын
Im going with a FTI Performance SB2800LS with my sloppy stage 2 cam. Thanks for the video.
@GreaseMonkeyTVАй бұрын
Thanks for watching!
@Avalanche222 күн бұрын
@@GreaseMonkeyTV Got it (SB2800LS) in today, AMAZING!! Makes the cam idle in gear SO much more stable and tolerable!! Havent gone for a rip yet, but I'm sure it will be great!
@GreaseMonkeyTV20 күн бұрын
@@Avalanche2 Sweet!
@LefishnАй бұрын
Should have also measured height after stock was off to see how much squat was lost
@K20GUY73Ай бұрын
Great video. I have a 383 Stroker in my 74' K20 and I need a torque converter for it. This helped me understand better what I need and what to expect. I hit the subscribe button and I'm going to check out your other videos on the build. I've got a 73' K20 I'm eventually going to do an LS swap. Hoping to learn some stuff from you. Thanks again.
@benjaminnewsom9193Ай бұрын
What gauges are you running on this build? I’m like those a lot
@GreaseMonkeyTVАй бұрын
NVU
@Im_DaltonmooreАй бұрын
Nice👍🏼
@GreaseMonkeyTVАй бұрын
Appreciate that.
@TheJeffe613Ай бұрын
Job well done on that truck! looks damn good.
@GreaseMonkeyTVАй бұрын
Thanks so much.
@mattmyers7255Ай бұрын
What are those new empty housings called. I can’t find any lol
@GreaseMonkeyTVАй бұрын
4x6 headlight housings. Search that on ebay or amazon.
@jgross5253Ай бұрын
Perfect convertor video. Thanks for the work you’ve done on this.
@GreaseMonkeyTVАй бұрын
Thanks for the kind words.
@tsamhita1Ай бұрын
Where u can buy it? I tried your link it didn’t work anymore
@GreaseMonkeyTVАй бұрын
Sorry about that. Always hate posting amazon & ebay links because they don't last forever.
@JorgeSantillan-gm8ziАй бұрын
I need the name of the light I need the same ones like yours
@brianreese9318Ай бұрын
Looks like cam fishers truck
@rickybellamy8191Ай бұрын
Great job! I will be experiencing this in 2 more months. Nice review.
@efrenalonso6879Ай бұрын
Thanks for the video, I bought the same control arms and I’m getting ready to install. Also are those big brake kit?
@GreaseMonkeyTVАй бұрын
Nah. There’s a vid in this playlist that covers them.
@felonebike9859Ай бұрын
This was a very well done video. Much appreciated. Hopefully I can find a housing for an 89 suburban setup
@YetiSmasherOhnOАй бұрын
Well done. Question: if you change the hydro oil every 100 hours, is this your second or third service on them? The manual says first after 75 hours then every 500 after. Just your preference? I ask because it also says avoid overdoing it as you risk adding contaminants to the hydro system. Really nice video, thanks!
@GreaseMonkeyTVАй бұрын
That was the first one. I kinda let it slide for too long.
@YetiSmasherOhnOАй бұрын
@@GreaseMonkeyTV You made it look easy for your first time! I did mine at 125 hours and thought I was gonna blow something but she runs great still at 300 hours.
@GreaseMonkeyTVАй бұрын
@@YetiSmasherOhnO Thanks for the kind words.
@steviedegiulio5023Ай бұрын
I have to ask did this work? I am so annoyed with the break noise mine even happens when it’s humid out not just cold.
@GreaseMonkeyTVАй бұрын
It helps to at least blow it out regularly with compressed air. We have a BMW now….
@martinolivas319Ай бұрын
I noticed your oil pan is sitting below engine cradle, what drop kit do you have and are you not worried
Пікірлер
Leaf springs huh? Is that an option for the newer trucks? Or is this a 3500?
Where exactly did you mount your pcm under the dash. In the process of moving mine in the cab from under the hood and I'm also installing Vintage Air on my 86. Is there room above the Vintage Air unit?
It's top center under the dash. Left of and above the VA unit
If you told us the brand and where to get the rock lights why not just link them in the description?
Links expire on amazon and people gripe in the comments
When my 12 mustang 3.7 was n/a a circle D 3c (3000-3200) helped me go from 12.9 @108 to 12.5 @109 convertor only. Other then adding a pro charger nothing added more performance. Awesome video and sick truck. I have a old 1980 Silverado I just picked up. Going to watch all your videos
What size drop u have and spindle
My boy, chewy 454 can port that thing for you you’ll get about 25 more horsepower
💜✝️
Beautiful
should i get the ksc40s or the ksc35 cause its a 3.5 instead of a 4?
3.5 if you don’t want to fab anything.
How's the turn radius on that monster? Curious as I'm looking at the same size ram.
What shock tune is in the Kings?
Carli spec
Nice truck, what's the best way to get the chrome around the truck off put new on and the guy that put it on messed it up
Pull it off, eraser wheel the leftover tape, install new from a roll. All available on Amazon. Use masking tape around the truck to line the new molding up where you like it.
I'm searching for one of these to pull my squaredrop from the street, up my driveway into my garage.
Did you use a 3.73 or 3.42 gear set? You stated 3.73, but part number in video is for 3.42. Either way are you happy with what you choose?
I did use 3.73 and it’s perfect.
Nice
Very well explained !!!
I installed that same converter in my stock 4l60e and fried the trans after a couple months probably because I had a 1/4 inch gap between converter and flexplate 😬.
😮
turn out clean. looks alot better lowered
How did you like the do things worry set up did everything work OK? I found him on Facebook. I just wanted to know if everything worked out good and what you had to do different to make it all work before I order it.
I have a 16 ford 150 2.7 EcoBoost engine just wondering if there's something I can do with the torque converter in my truck to help it go faster do you know what I can do to the engine to make the it faster.speed wise?its all stock now from the factory
Livernois Motorsports.
Yep, like cops speeding like NASCAR to and from work, those with power most often abuse it
The nerve!😂😂😂😂
It totally devalues the neighborhood with this junky looking half-assed projects.
Not much of a garage there, bud. Missing a wall and a roof
That is a goofy looking setup.
Disappointed that you never filmed your tach when you tested the stall of the converter while motionless.
Thanks for this ...I know its a couple years old...Just had exact issue on my 2006 Malibu boat trailer (boatmate brand)...locked up caliper pushed out my sight window piston just like you described. I did not know they did that. I had a caliper lock up about 7 years ago and ended up replacing it and rebuilding a couple of the others (4 brake system). I had kinda forgotten some of the steps so this was a nice refresher! Earned a new subscriber!
Welcome to the gang!
I’m having issues finding why my factory climate control system constantly pulls in air from the engine bay. My Exaust is leak free, but at stop lights I pull in Exaust from the surrounding vehicles. Any advice would help
Turning your air to recirculate uses only the interior air.
I bought a 383 stroker from blueprint engines and had to buy a transmission so I got a th 350 from Facebook marketplace that came with a 9in coan tork converter 3800 stall cam speck is .544 Intake .555 Exhaust what you think about the 3800 stall for the engine? I’m new to this stall converter situation
A lot depends on the weight of the car and where the power curve is in your engine. Drive it and see how you like it. Removing a TH350 is pretty simple.
@@GreaseMonkeyTV peak torque is at 4400rpm and peak hp around 5500 and the car is a 1966 Pontiac lemans I believe it weighs around 3200lbs
@@Alec_Costa Peak isn't so much a factor as the curve when you're street driving.
Just passed you on the highway and saw the yt name I was in the elite detailing truck
Oh hey! Around the 96th street bridge?
Yep!
Never would have known they were the bypass valve for purging. Thought they were just for moving mower when not running.
I have close to the same set up as you. I’m having a issue of the idle rpm dropping so low sometimes at a stop light that it kills the engine when the ac clutch cycles. Did you do anything to bump up the idle when it cycles?
Your tuner should be able to fix that.
Im going with a FTI Performance SB2800LS with my sloppy stage 2 cam. Thanks for the video.
Thanks for watching!
@@GreaseMonkeyTV Got it (SB2800LS) in today, AMAZING!! Makes the cam idle in gear SO much more stable and tolerable!! Havent gone for a rip yet, but I'm sure it will be great!
@@Avalanche2 Sweet!
Should have also measured height after stock was off to see how much squat was lost
Great video. I have a 383 Stroker in my 74' K20 and I need a torque converter for it. This helped me understand better what I need and what to expect. I hit the subscribe button and I'm going to check out your other videos on the build. I've got a 73' K20 I'm eventually going to do an LS swap. Hoping to learn some stuff from you. Thanks again.
What gauges are you running on this build? I’m like those a lot
NVU
Nice👍🏼
Appreciate that.
Job well done on that truck! looks damn good.
Thanks so much.
What are those new empty housings called. I can’t find any lol
4x6 headlight housings. Search that on ebay or amazon.
Perfect convertor video. Thanks for the work you’ve done on this.
Thanks for the kind words.
Where u can buy it? I tried your link it didn’t work anymore
Sorry about that. Always hate posting amazon & ebay links because they don't last forever.
I need the name of the light I need the same ones like yours
Looks like cam fishers truck
Great job! I will be experiencing this in 2 more months. Nice review.
Thanks for the video, I bought the same control arms and I’m getting ready to install. Also are those big brake kit?
Nah. There’s a vid in this playlist that covers them.
This was a very well done video. Much appreciated. Hopefully I can find a housing for an 89 suburban setup
Well done. Question: if you change the hydro oil every 100 hours, is this your second or third service on them? The manual says first after 75 hours then every 500 after. Just your preference? I ask because it also says avoid overdoing it as you risk adding contaminants to the hydro system. Really nice video, thanks!
That was the first one. I kinda let it slide for too long.
@@GreaseMonkeyTV You made it look easy for your first time! I did mine at 125 hours and thought I was gonna blow something but she runs great still at 300 hours.
@@YetiSmasherOhnO Thanks for the kind words.
I have to ask did this work? I am so annoyed with the break noise mine even happens when it’s humid out not just cold.
It helps to at least blow it out regularly with compressed air. We have a BMW now….
I noticed your oil pan is sitting below engine cradle, what drop kit do you have and are you not worried
Like the grill do u know where he got it from
He bought it as is.
@GreaseMonkeyTV thanks for response