That doesn't look like the right power supply, I know Cisco PSU's stick out the back sometimes but that far?
@acefrombk7656 Жыл бұрын
I been trying to buy a scooter for the pass month now,it’s so much to choice from,I was going to purchase this particular scooter but I’m going to wait it out to see if they end up fixing the problem it has..
@acefrombk7656 Жыл бұрын
@@cbcalhoun appreciate it 👍🏼
@chrisdudley8366 Жыл бұрын
Hello everyone's listen this is the same problem that the my Pegasus has. The tires are not properly balanced that's the problem.
@dhulfiqaraljaberi6599 Жыл бұрын
how do We balance the tires? I have the same problem! Were you able to resolve your problem?
@chrisdudley8366 Жыл бұрын
Yes I had varla send me a new motor hub they try to tell me that was normal vibrations but it's not normal after they sent me the new tire and hub never had the issue again. On your hub it's a bushing that's the problem it's not perfectly round inside the hub which will cause heavy vibrations at higher speeds.
@dhulfiqaraljaberi6599 Жыл бұрын
@@chrisdudley8366 thank you for your reply, I contacted Varla and they also said it is normal, I am feeling crazy amount of vibration while riding above 20 mph, let's see what they are gonna do.
@chrisdudley8366 Жыл бұрын
Yep see I told you that's what they were going to say the best action is don't take no for an answer. You have paid a lot of money for that scooter.
@dhulfiqaraljaberi6599 Жыл бұрын
@@chrisdudley8366 Yes, for sure I won't accept any No answer, it is only 3 months old.
@707homer Жыл бұрын
This is normal for me too. The only issue mine has is the front brakes more spongy feel, but I’m working on it with the Varla company.
@FilippPlotkin Жыл бұрын
Hi. Have you ever noticed your scooter change gears or switch between single and dual motors on its own while riding and not touching speed selector switch?
@FilippPlotkin Жыл бұрын
Weird. Mine does that
@707homer Жыл бұрын
I haven’t noticed that happening on my Eagle Pro. You should contact the warranty department for help. The only issue I found on mine, was the front hydro brake doesn’t fully brake. I’m currently working on it, overall, it’s a good Escooter.
@FilippPlotkin Жыл бұрын
Mine vibrates quite a bit as well. It may be the way most if these tires are. What drives me nuts is that on mine it seems that controllers are not synchronized and it doesn't drive smoothly at steady speed. I either always have to accelerate, slow down or run single motor. Do you have the same issue? Thanks
@williamcopeland2617 Жыл бұрын
If you are having issues with your controllers, or think you may have controller issues, open up your deck unplug your controllers from the battery and plug them back in after 20 seconds. See if solve those particular issues for you.
@williamcopeland2617 Жыл бұрын
No broha. I tightened my Lightning from day one and it feels like I have a damn steering dampener on it like the Phaeton does. Have you taken it apart and put it back together just to see if Varla missed something? If not, give that a shot.
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Also, upgrade to the Rugged Clamp. That'll help reduce some wobble as well.
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Yo Chris. See if this video can help you. kzread.info/dash/bejne/rIeu1NZ6d8vJZpM.html
@EBikeBuilder_ Жыл бұрын
any imperfection of the wheel will be greatly exaggerated when you have it up in the stand spinning at max noload rpms
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Well, when you are actually on the scooter your body weight will minimize a lot of that vibration. Not all of course.
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Did Varlor give you any suggestions on what to do?
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Wow. So basically you're on your own. Look up some ZERO 10X scooter videos since they are the same scooters and hopefully you can find something. I'll do the same and shoot you a link if I come across anything I'll send you the link.
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Where did you order them from? I was going to order some of those PMT tires for my Tubowheel Lightning & Turbowheel Phaeton.
@williamcopeland2617 Жыл бұрын
@@cbcalhoun Also, did you try to tighten up the stem on your scooter to see if that'll help out some?
@223c7 Жыл бұрын
Oh boy! Should I cancel it now?
@kingstergaming7242 Жыл бұрын
No, that's how all thumb throttle are. Nami Burn-E (high power scooter has it as well). Is part of the throttle safety feature. You have to learn how to place the throttle to avoid the dead zone.
@FilippPlotkin Жыл бұрын
Mine is the same. I also get vibration like my front motor is not going at the same speed as my back one. I find it hard to ride in dual motor mode and often switch to a single motor just to not deal with that tug and pull feeling. I hope there is a better throttle controller out there that can work. Maybe this will be more refined in the future, but we paid full price and it would be nice to not have these issues
@FilippPlotkin Жыл бұрын
Is your rear tire also facing wrong direction? I don't know why they do this?
@FilippPlotkin Жыл бұрын
Does anyone know why?
@FilippPlotkin Жыл бұрын
@@cbcalhoun yes but other manufacturers flip it around. I think it's too raw for $2200
@FilippPlotkin Жыл бұрын
What is it sitting on?
@ryanstetser667 Жыл бұрын
This is a normal thing with all scooters
@ryanstetser667 Жыл бұрын
@@cbcalhounfirst off they don’t make that thumb throttle they bought it form another company and totally I agree Second off this scooter doesn’t have sine wave controllers so it will not be linear if you want that you will have to get a wolf
@kingstergaming7242 Жыл бұрын
Nami burn-e has the same issue. Majority of scooter with thumb throttle have the dead zone. The old Wolf King has it but the new Wolf king gt pro doesn't have it due to the sinewave controllers.
@DX48H9WM Жыл бұрын
One tip is to anchor your thumb on the housing right above it to develop that muscle memory.
@williamcopeland2617 Жыл бұрын
Unfortunately, that's one of the problems with all Throttle Triggers. Sucks!
@katiefa5255 Жыл бұрын
Mine does the same did you contact Varla?
@katiefa5255 Жыл бұрын
I emailed them as well and they asked me to make a video. I hope they figure it out! But I’m not hopeful. I’m thinking of changing my shocks. I don’t know which shocks to get, but I’m thinking of getting something like Nami’s shocks.
@katiefa5255 Жыл бұрын
@@cbcalhoun To be honest I didn’t get the chance to even record a video. Ya, I heard about the vibrating but I haven’t gone that fast with mine. I went 34 mph and I didn’t feel that much shaking. I will definitely ride this weekend. I read the comment section of another video where you said you ordered different tires. What kind of tires did you get? Please let us know if these tires fix the vibrating issue. I also got the dimension of the shock( bore diameter 12, length 135). The size of shock is 135 but I couldn’t find 135mm in my search. Could I put a 150mm shock on the Eagle One Pro instead?
@kingstergaming7242 Жыл бұрын
@@cbcalhoun get a Nami? You can't compare a $2200 scooter Vs a $4690 scooter. if you been keeping up with e-scooters, you'll know the dead zone is common.
Пікірлер
Excellent
👍I really enjoyed the video
I enjoyed watching this great video.
👌 👏 👍
That doesn't look like the right power supply, I know Cisco PSU's stick out the back sometimes but that far?
I been trying to buy a scooter for the pass month now,it’s so much to choice from,I was going to purchase this particular scooter but I’m going to wait it out to see if they end up fixing the problem it has..
@@cbcalhoun appreciate it 👍🏼
Hello everyone's listen this is the same problem that the my Pegasus has. The tires are not properly balanced that's the problem.
how do We balance the tires? I have the same problem! Were you able to resolve your problem?
Yes I had varla send me a new motor hub they try to tell me that was normal vibrations but it's not normal after they sent me the new tire and hub never had the issue again. On your hub it's a bushing that's the problem it's not perfectly round inside the hub which will cause heavy vibrations at higher speeds.
@@chrisdudley8366 thank you for your reply, I contacted Varla and they also said it is normal, I am feeling crazy amount of vibration while riding above 20 mph, let's see what they are gonna do.
Yep see I told you that's what they were going to say the best action is don't take no for an answer. You have paid a lot of money for that scooter.
@@chrisdudley8366 Yes, for sure I won't accept any No answer, it is only 3 months old.
This is normal for me too. The only issue mine has is the front brakes more spongy feel, but I’m working on it with the Varla company.
Hi. Have you ever noticed your scooter change gears or switch between single and dual motors on its own while riding and not touching speed selector switch?
Weird. Mine does that
I haven’t noticed that happening on my Eagle Pro. You should contact the warranty department for help. The only issue I found on mine, was the front hydro brake doesn’t fully brake. I’m currently working on it, overall, it’s a good Escooter.
Mine vibrates quite a bit as well. It may be the way most if these tires are. What drives me nuts is that on mine it seems that controllers are not synchronized and it doesn't drive smoothly at steady speed. I either always have to accelerate, slow down or run single motor. Do you have the same issue? Thanks
If you are having issues with your controllers, or think you may have controller issues, open up your deck unplug your controllers from the battery and plug them back in after 20 seconds. See if solve those particular issues for you.
No broha. I tightened my Lightning from day one and it feels like I have a damn steering dampener on it like the Phaeton does. Have you taken it apart and put it back together just to see if Varla missed something? If not, give that a shot.
@@cbcalhoun Also, upgrade to the Rugged Clamp. That'll help reduce some wobble as well.
@@cbcalhoun Yo Chris. See if this video can help you. kzread.info/dash/bejne/rIeu1NZ6d8vJZpM.html
any imperfection of the wheel will be greatly exaggerated when you have it up in the stand spinning at max noload rpms
@@cbcalhoun Well, when you are actually on the scooter your body weight will minimize a lot of that vibration. Not all of course.
@@cbcalhoun Did Varlor give you any suggestions on what to do?
@@cbcalhoun Wow. So basically you're on your own. Look up some ZERO 10X scooter videos since they are the same scooters and hopefully you can find something. I'll do the same and shoot you a link if I come across anything I'll send you the link.
@@cbcalhoun Where did you order them from? I was going to order some of those PMT tires for my Tubowheel Lightning & Turbowheel Phaeton.
@@cbcalhoun Also, did you try to tighten up the stem on your scooter to see if that'll help out some?
Oh boy! Should I cancel it now?
No, that's how all thumb throttle are. Nami Burn-E (high power scooter has it as well). Is part of the throttle safety feature. You have to learn how to place the throttle to avoid the dead zone.
Mine is the same. I also get vibration like my front motor is not going at the same speed as my back one. I find it hard to ride in dual motor mode and often switch to a single motor just to not deal with that tug and pull feeling. I hope there is a better throttle controller out there that can work. Maybe this will be more refined in the future, but we paid full price and it would be nice to not have these issues
Is your rear tire also facing wrong direction? I don't know why they do this?
Does anyone know why?
@@cbcalhoun yes but other manufacturers flip it around. I think it's too raw for $2200
What is it sitting on?
This is a normal thing with all scooters
@@cbcalhounfirst off they don’t make that thumb throttle they bought it form another company and totally I agree Second off this scooter doesn’t have sine wave controllers so it will not be linear if you want that you will have to get a wolf
Nami burn-e has the same issue. Majority of scooter with thumb throttle have the dead zone. The old Wolf King has it but the new Wolf king gt pro doesn't have it due to the sinewave controllers.
One tip is to anchor your thumb on the housing right above it to develop that muscle memory.
Unfortunately, that's one of the problems with all Throttle Triggers. Sucks!
Mine does the same did you contact Varla?
I emailed them as well and they asked me to make a video. I hope they figure it out! But I’m not hopeful. I’m thinking of changing my shocks. I don’t know which shocks to get, but I’m thinking of getting something like Nami’s shocks.
@@cbcalhoun To be honest I didn’t get the chance to even record a video. Ya, I heard about the vibrating but I haven’t gone that fast with mine. I went 34 mph and I didn’t feel that much shaking. I will definitely ride this weekend. I read the comment section of another video where you said you ordered different tires. What kind of tires did you get? Please let us know if these tires fix the vibrating issue. I also got the dimension of the shock( bore diameter 12, length 135). The size of shock is 135 but I couldn’t find 135mm in my search. Could I put a 150mm shock on the Eagle One Pro instead?
@@cbcalhoun get a Nami? You can't compare a $2200 scooter Vs a $4690 scooter. if you been keeping up with e-scooters, you'll know the dead zone is common.