The Auto Dolly, made in the USA by Merrick Machine Co., is the undisputed market leader, thanks to its 1/4" steel construction, choice of STD or HD casters, and a full line of accessories that make them even more useful in your shop or garage.
Is she REALLY dragging her mic equipment??? LOLLL WTFFF Hope
@rvbzero72 жыл бұрын
LOL I'm definitely gonna contact the website, but I don't want to hear from anyone! LOLLLLLLL she's fkin hilarious
@leadman42732 жыл бұрын
If you are to push the car sideways, turn all the dollies wheels in that direction. Moving forward or backwards, put the dollies wheels facing front or rear. Without doing this, the car is impossible to move by yourself. These plastic wheels are crap.
@anastasioworley31022 жыл бұрын
you should have lock for the wheels
@genecoppedge59723 жыл бұрын
Thank you, best rotisserie demonstration I’ve seen anywhere!
@jerrellstrawn64093 жыл бұрын
Nice video, except for the "How I attach it to my lift" part.
@todddebockler77863 жыл бұрын
Full size ford van body e series club wagon any ideas to do the same with this
@DanneyTanner3 жыл бұрын
My back feels better already
@marcol78473 жыл бұрын
I really need this
@adamdf1014 жыл бұрын
Didn’t even crown the studs bro
@rthawknatanabah17595 жыл бұрын
NICE....
@blackbiker19616 жыл бұрын
I have a 1958 Thunderbird I'm in the process of restoring and I just purchased a set of 4 of the 16 inch I have not used them yet I'm hoping they work well as soon as I get them put together and used them I will repost to say how they worked for me.
@BillyBanana756 жыл бұрын
this guys has AWESOME 80's hair!
@scarface49136 жыл бұрын
i love it
@keimo20077 жыл бұрын
young bernie ecclestone?
@paulcolville59728 жыл бұрын
Bad for the tyres?
@HGAviator8 жыл бұрын
I've tested my friend's and its a piece of crap. I'm much happier with my Harbor Freight Motorcycle Dolly. It has little ramps, when placed in down position, keeps the dolly from moving and also helps with ease of riding up on it. I also added an extra kickstand plate. checkout my Modification my channel.
@rlvsun8 жыл бұрын
The small roller caster is in order to keep gravity the lowest possible? Amazing how much weight can take a well desing dolley even with a simple structure
@skyforce68 жыл бұрын
2:30 Hill billy price is right.
@chopper64648 жыл бұрын
While it is a nice rotisserie it is a little lite duty for most vehicles. At 3k lbs you are talking about a far lighter weight than what you would normally encounter. Beef up the center shaft and the accompanying bearing and you could have a really nice system for the home restorer.
@cindykenward9 жыл бұрын
Does this have to be up against a wall? Does it slip out from under the bike if its not? Please advise. Thanks.
@MerrickMachineCo9 жыл бұрын
Thanks for checking out the video! The Cycle Dolly will not slip out from under the bike once the bike is mounted in the V-Groove channel and the kickstand is in place on the kickstand plate. Once the bike is mounted you can move the bike around into whatever position works best for you. We suggest when you mount and dismount your bike that you have the nose of the dolly up against a wall or other solid object so it is easier to walk on or off. If you have anymore questions please feel free to give us a call at 1-800-568-7423 Ext. 188. Thanks again!
@boneob9 жыл бұрын
What makes your ~ $350 cycle dolly better than the ~$79 Harbor Freight dolly??? I can buy 4-1/2 of the HF for each one of yours and no shipping... seems to me that the HF dolly has more to offer than yours. Am I wrong???? If so how?
@MerrickMachineCo9 жыл бұрын
Thanks for your question! We don't speak badly of our "competition", so you will have to do your own research with regard the "CONS" mentioned by owners of other products. Regarding our product, you may notice that our Cycle Dolly has ten (10) casters. We had to hunt far and wide to get the right kind of casters also. I won't go into detail here, for the benefit of the competition, but the material that the caster's wheel is made of makes a difference. The kickstand part is made with the ability to adjust it's placement right where you want/need it. Perhaps most importantly, our "V" groove shape means that the motorcycles wheels are only 3/4" off of the ground. In addition, the Cycle Dolly features a powder coated finish, not simply painted. This is a benefit you may not appreciate when you compare products right out of the box, but will definitely appreciate in the years to come. Finally, the Cycle Dolly by Merrick Machine Company was designed and built right here in the U.S. Thanks again for your question!
@ds20000619 жыл бұрын
Will the cycle dolly hold a BMW K1600 GTL and where can i purchase one in Canada?
@carguygarage10 жыл бұрын
You can get these on our web site at www.carguygarage.com/car-dolly.html
@donrichardson644711 жыл бұрын
don't spin it too much, there wont be anything left to restore.
@CountrySideReptiles11 жыл бұрын
bout 2 grand lol, i need one cause im restoring a 1979 camaro rs from frame up and this would be very very helpfull haha, wonder if i can find somewhere to rent one.......hmmm
@mohamedelsherif452111 жыл бұрын
how can i get this machine ?
@penas111ify11 жыл бұрын
Very handy
@alexb0i11 жыл бұрын
Would you be able to use this for motorcycle engines and how would you go about doing so?
@realillest11 жыл бұрын
Looks too flimsy. Good idea for maybe a lawnmower engine.
@JamandTheHolograms11 жыл бұрын
Do any of these come with Locks to keep the car in place and from moving?
@Formulabruce11 жыл бұрын
Sweet!
@bagheadbaby11 жыл бұрын
pretty awsome, just uessing it costs a bom haha :')
@THE7HTOWN1NATIV312 жыл бұрын
this is a pretty awesome product i am very impressed. But for someone like me it would be useless.
@THE7HTOWN1NATIV312 жыл бұрын
Whats the deal with the car? Love those Thirdgens
@MerrickMachineCo12 жыл бұрын
Glad to hear it Brandon. We'd love to see some photos (or video) of your project on our rotisserie!
@brandonrussell983012 жыл бұрын
porsche 914. the same car that I'm getting one of these for
@TheChargedHornet12 жыл бұрын
Alan, there's a sweet Lamborghini Coutach, on ebay for sale, you should check it out.
@Exoticcollective12 жыл бұрын
I just got your reply on this vehicle. Can you email me at [email protected] with info on the car, price etc?
@MerrickMachineCo12 жыл бұрын
Thanks for watching and your comment. This video was made using the on-camera microphone only. We've upgraded to a nice wireless microphone set-up so you should enjoy better sound quality in the future.
@MerrickMachineCo12 жыл бұрын
I'm a bit confused on how you think it might "fall". The Auto Rotisserie with E-Z Spin has safety pins on each of the elevation shafts (both sides) and both sides of the rotational shaft have a spring loaded safety pin that can automatically engage the next hole in the rotation. This spring loaded pin can be disengaged from one side and still be held by the other side for one man operation. We do recommend two man operation whenever possible.
@MerrickMachineCo12 жыл бұрын
Thanks for watching and commenting! The Merrick Machine Co. Auto Rotisserie with E-Z Spin was designed by a professional engineer with decades of experience. Its capacity is officially rated at 3000 lbs but have run tests (don't try this at home) with fully loaded vehicles of even higher weights. Normally you are putting a vehicle on the rotisserie that has the engine, interior, (etc) removed making the 3000 lb capacity a generous figure for most projects.
@GnosisMan5012 жыл бұрын
I still think it's not robust enough.....In addition, while it's fine that the pin locks by itself in case it turns on its own, how about a safety pin to prevent it from falling?
@MerrickMachineCo13 жыл бұрын
@Allandiablo Replied through KZread message to you.
@Exoticcollective13 жыл бұрын
Is this Countach for sale?
@MerrickMachineCo13 жыл бұрын
Although the video shows one person moving the vehicle, we always recommend two people - for the 2nd set of eyes, if nothing else!
@moey36213 жыл бұрын
I don't know if it's your floors, because I can use mine as a one-person-job just fine. I have a standard concrete floor in my garage and I'm a girl. These are great for letting me move things in the garage by myself.
Пікірлер
f/\g
what a scam artist
Is she REALLY dragging her mic equipment??? LOLLL WTFFF Hope
LOL I'm definitely gonna contact the website, but I don't want to hear from anyone! LOLLLLLLL she's fkin hilarious
If you are to push the car sideways, turn all the dollies wheels in that direction. Moving forward or backwards, put the dollies wheels facing front or rear. Without doing this, the car is impossible to move by yourself. These plastic wheels are crap.
you should have lock for the wheels
Thank you, best rotisserie demonstration I’ve seen anywhere!
Nice video, except for the "How I attach it to my lift" part.
Full size ford van body e series club wagon any ideas to do the same with this
My back feels better already
I really need this
Didn’t even crown the studs bro
NICE....
I have a 1958 Thunderbird I'm in the process of restoring and I just purchased a set of 4 of the 16 inch I have not used them yet I'm hoping they work well as soon as I get them put together and used them I will repost to say how they worked for me.
this guys has AWESOME 80's hair!
i love it
young bernie ecclestone?
Bad for the tyres?
I've tested my friend's and its a piece of crap. I'm much happier with my Harbor Freight Motorcycle Dolly. It has little ramps, when placed in down position, keeps the dolly from moving and also helps with ease of riding up on it. I also added an extra kickstand plate. checkout my Modification my channel.
The small roller caster is in order to keep gravity the lowest possible? Amazing how much weight can take a well desing dolley even with a simple structure
2:30 Hill billy price is right.
While it is a nice rotisserie it is a little lite duty for most vehicles. At 3k lbs you are talking about a far lighter weight than what you would normally encounter. Beef up the center shaft and the accompanying bearing and you could have a really nice system for the home restorer.
Does this have to be up against a wall? Does it slip out from under the bike if its not? Please advise. Thanks.
Thanks for checking out the video! The Cycle Dolly will not slip out from under the bike once the bike is mounted in the V-Groove channel and the kickstand is in place on the kickstand plate. Once the bike is mounted you can move the bike around into whatever position works best for you. We suggest when you mount and dismount your bike that you have the nose of the dolly up against a wall or other solid object so it is easier to walk on or off. If you have anymore questions please feel free to give us a call at 1-800-568-7423 Ext. 188. Thanks again!
What makes your ~ $350 cycle dolly better than the ~$79 Harbor Freight dolly??? I can buy 4-1/2 of the HF for each one of yours and no shipping... seems to me that the HF dolly has more to offer than yours. Am I wrong???? If so how?
Thanks for your question! We don't speak badly of our "competition", so you will have to do your own research with regard the "CONS" mentioned by owners of other products. Regarding our product, you may notice that our Cycle Dolly has ten (10) casters. We had to hunt far and wide to get the right kind of casters also. I won't go into detail here, for the benefit of the competition, but the material that the caster's wheel is made of makes a difference. The kickstand part is made with the ability to adjust it's placement right where you want/need it. Perhaps most importantly, our "V" groove shape means that the motorcycles wheels are only 3/4" off of the ground. In addition, the Cycle Dolly features a powder coated finish, not simply painted. This is a benefit you may not appreciate when you compare products right out of the box, but will definitely appreciate in the years to come. Finally, the Cycle Dolly by Merrick Machine Company was designed and built right here in the U.S. Thanks again for your question!
Will the cycle dolly hold a BMW K1600 GTL and where can i purchase one in Canada?
You can get these on our web site at www.carguygarage.com/car-dolly.html
don't spin it too much, there wont be anything left to restore.
bout 2 grand lol, i need one cause im restoring a 1979 camaro rs from frame up and this would be very very helpfull haha, wonder if i can find somewhere to rent one.......hmmm
how can i get this machine ?
Very handy
Would you be able to use this for motorcycle engines and how would you go about doing so?
Looks too flimsy. Good idea for maybe a lawnmower engine.
Do any of these come with Locks to keep the car in place and from moving?
Sweet!
pretty awsome, just uessing it costs a bom haha :')
this is a pretty awesome product i am very impressed. But for someone like me it would be useless.
Whats the deal with the car? Love those Thirdgens
Glad to hear it Brandon. We'd love to see some photos (or video) of your project on our rotisserie!
porsche 914. the same car that I'm getting one of these for
Alan, there's a sweet Lamborghini Coutach, on ebay for sale, you should check it out.
I just got your reply on this vehicle. Can you email me at [email protected] with info on the car, price etc?
Thanks for watching and your comment. This video was made using the on-camera microphone only. We've upgraded to a nice wireless microphone set-up so you should enjoy better sound quality in the future.
I'm a bit confused on how you think it might "fall". The Auto Rotisserie with E-Z Spin has safety pins on each of the elevation shafts (both sides) and both sides of the rotational shaft have a spring loaded safety pin that can automatically engage the next hole in the rotation. This spring loaded pin can be disengaged from one side and still be held by the other side for one man operation. We do recommend two man operation whenever possible.
Thanks for watching and commenting! The Merrick Machine Co. Auto Rotisserie with E-Z Spin was designed by a professional engineer with decades of experience. Its capacity is officially rated at 3000 lbs but have run tests (don't try this at home) with fully loaded vehicles of even higher weights. Normally you are putting a vehicle on the rotisserie that has the engine, interior, (etc) removed making the 3000 lb capacity a generous figure for most projects.
I still think it's not robust enough.....In addition, while it's fine that the pin locks by itself in case it turns on its own, how about a safety pin to prevent it from falling?
@Allandiablo Replied through KZread message to you.
Is this Countach for sale?
Although the video shows one person moving the vehicle, we always recommend two people - for the 2nd set of eyes, if nothing else!
I don't know if it's your floors, because I can use mine as a one-person-job just fine. I have a standard concrete floor in my garage and I'm a girl. These are great for letting me move things in the garage by myself.
horrible sounds!