Пікірлер

• 
  @ginaladner14 сағат бұрын

  Does this one clean better? What was it about the 5105 that you didn’t like?

• 
  @averagemaintenance3875Сағат бұрын

  I gifted my 5105 to my son and wanted to buy same brand but a little bit simpler due to current prices . Both clean the same good. Old one was more technologically advanced. In my opinion one thing that is better with new one is noise. New one is a little bit more quieter.

• 
  @gonzalessolano48304 сағат бұрын

  El mismo problema tengo yo

• 
  @averagemaintenance38752 сағат бұрын

  Espero que mi video y los comentarios de diferentes personas puedan ayudarte a tomar una decisión sobre qué hacer.

• 
  @jams153317 сағат бұрын

  The torque spec is 14 Ft lbs

• 
  @averagemaintenance387512 сағат бұрын

  Thank you. Good to know.

• 
  @jxman182 күн бұрын

  I have watched several videos on cleaning the EZ Trap- this is by far the best one I have seen in terms of information if not production value! Nice job, very much appreciated!

• 
  @averagemaintenance38752 күн бұрын

  Thank you for your kind comment and for watching. It makes me feel good knowing my videos help someone else.

• 
  @HeWentThattaway2 күн бұрын

  What is the little plastic valve for that comes with the filter.

• 
  @averagemaintenance38752 күн бұрын

  For to drain filter casing before taking it off to avoid oil spilling.

• 
  @WhatsInaName682 күн бұрын

  Easy. Thanks

• 
  @averagemaintenance38752 күн бұрын

  Glad to hear that.

• 
  @bornhomemade15132 күн бұрын

  ❤

• 
  @averagemaintenance38752 күн бұрын

  Thank you for watching!

• 
  @cathymandeville29533 күн бұрын

  Mine won't unscrew. What do I do??? Help

• 
  @averagemaintenance38753 күн бұрын

  Are you using the tool like in my video? if no , I highly recommend it. if yes, don't force it. Try to go back and forth with tool to lose it up without braking crossed section in the middle. And don't kick it just apply slow pressure. I hope it helps.

• 
  @donaldakin25265 күн бұрын

  Either replace third brake light gasket with butyl tape or get the updated light with updated gasket or the problem will still be there. Seal 4 third brakelite screws also (dont forget)

• 
  @averagemaintenance38755 күн бұрын

  Thank you for your suggestion. It is good to know that.

• 
  @gadflyrock10 күн бұрын

  Have you ever found a way to convert it from kilometers per hour to miles per hour? The manufacturer says hold the minus key on the remote and then power it on and it should give you an option but mine never has.

• 
  @averagemaintenance38759 күн бұрын

  As far as I know, this trademill can't change miles to kilometers.

• 
  @gadflyrock9 күн бұрын

  I reached out to the company and they suggested holding the minus key before powering on the treadmill and it would give one the option but that method has never worked for me.

• 
  @averagemaintenance38759 күн бұрын

  @gadflyrock I will try that when have time. If it works, I will let you know.

• 
  @gadflyrock10 күн бұрын

  Really helpful video, thank you so much for posting!

• 
  @averagemaintenance38759 күн бұрын

  You are welcome. Thank you for watching.

• 
  @dianacovaleda65614 күн бұрын

  Hola buenos días compre el ring dórbell 3 plus y no lo he podido instalar energía tengo 110 voltios que me aconseja

• 
  @averagemaintenance387514 күн бұрын

  Tiene opción de cableado? En caso afirmativo, siga las instrucciones que vienen con el anillo y mire mi video. Si no es la opción cableada, necesitará instalarla y realizar la configuración.

• 
  @krashedfiles15 күн бұрын

  Hey guys, I have a 2011 Toyota Camry SE, with a 2.5K 4Cylinder engine. When the car was first bought by my mom, she was told it was a SEALED transmission and that the fluid was good for the life of the car. Unfortunately, she listened to that claim and never changed the transmission fluid. The car was given to me with around 160K miles on it. Come to find out, its NOT actually a sealed transmission, and the dipstick is just on the bottom of the car. I have heard that you should not change the trans fluid if it’s past 100,000 because it can do more harm than good, but I really want to change it. Should I still change the trans oil? Ik this may be a bit of a newbie question but I’m still learning about cars 🙏🙏

• 
  @averagemaintenance387514 күн бұрын

  It is definitely risky, and ultimately, it is up to you.. Based on what you say that you really want to change it, you could at least check the condition of fluid by doing what I have done. Take out a small amount of fluid, and put the same amount back. You will refresh the condition of fluid and won't disturbe seals and gears. If all is good, you could do it again after a few thousand miles. The goal is to have fluid redish and not black. Good luck.

• 
  @marcospacheco126617 күн бұрын

  I want to how long it take to charge the battery

• 
  @averagemaintenance387517 күн бұрын

  I don't remember the exact time needed to fully charge the battery, but if you are hardwiring the Ring, then you only need to charge it enough to set it up. After that, Ring will be charged through the wires. I hope this helps.

• 
  @ritaroad17 күн бұрын

  Wow for the first time I lucked out in that I have practically the same model. The only difference is the settings on mine are on the door, not on the top. The filter is identical and I just checked it. It’s very clean. Dirty dishes go in the sink. Before going into the dishwasher I give them a rinse with super hot water. I don’t put pots in there, just the lids. I usually do a quick wash and dry. Is this a bad thing? Three hours seems too long.

• 
  @averagemaintenance387517 күн бұрын

  I do the rinsing with hot water and would do quick wash if dishes are mostly clean. If dishes are oily and a bit stubborn with dirt than I would do Normal or Auto wash. I think it is not bad what you doing. Once only I needed to wash it again after grilling because stain could still be seen on dishes.

• 
  @ritaroad17 күн бұрын

  @@averagemaintenance3875 Thank you.

• 
  @chloeeyre580318 күн бұрын

  Lovely set up 👌🍺

• 
  @averagemaintenance387518 күн бұрын

  Thank you.

• 
  @uncianofamily41618 күн бұрын

  Hello what do you call that strap ? I’m trying to order on etrailer website

• 
  @sherryberrydc774419 күн бұрын

  I just purchased a Maytag dishwasher and this is my first time using a dishwasher. My question is do it supposed to have a little water inside the dishwasher at the bottom after using it. thank you for this video it was helpful. I also need to purchase the mounting brackets.

• 
  @averagemaintenance387519 күн бұрын

  It is normal to have a little water at the bottom, especially if drying cycle was not used. Mounting brackets needed to be part of package if you purchased it new.

• 
  @mseals2221 күн бұрын

  People kill me with saying this washer is loud. At this price point it is extremely quiet. What you here is the belt driven motor turning the tub. I'm guessing at a high price point maybe that is more insulated from the outside. Mine is so quiet I can close the laundry room door and you don't hear anything elsewhere in the house. Even rooms next to the laundry room.

• 
  @averagemaintenance387521 күн бұрын

  I think it is about noise tolerance for different people. But you are right about price level. I am glad that you like yours.Thank you for commenting and helping others to make their decision.

• 
  @dylandonaghue675019 күн бұрын

  It is loud. I am guessing you live in a newer home than mine. My house is over 100 years old and every time the washer fills, those old pipes go klunk klunk klunk! Yes, I do have copper pipes, but it’s an old house. Nevertheless, my previous top load Kenmore washer was nowhere near this loud.

• 
  @averagemaintenance387519 күн бұрын

  @dylandonaghue6750 I understand. If you have better in the past, it is hard to use it. Like I said in other comments, all this conversation will help potential buyers to make their decision. Thank you for your comments and for watching it.

• 
  @claracanovic63921 күн бұрын

  This video explained it perfect! Thank you so much !

• 
  @averagemaintenance387521 күн бұрын

  Thank you for watching.

• 
  @Yrathus29 күн бұрын

  Good soundtrack and good repair trick, thank you

• 
  @averagemaintenance387529 күн бұрын

  Thank you for watching. I am glad you like the trick. Sometimes, we throw away good things that need just a little love.

• 
  @anthonybranch8767Ай бұрын

  Thank you appreciated

• 
  @averagemaintenance3875Ай бұрын

  I am glad you find it helpfull.Thank you for watching.

• 
  @mialuthor7597Ай бұрын

  Thank you for the video. I dropped mine and the black wire came loose from the silver top. I put it back in butn ow Sperry BT 500 does not work. Any advise to revive it? Thank you Mia

• 
  @averagemaintenance3875Ай бұрын

  When you put wire back are you sure that wire is connected? If not, solder it together as I did. If connection is good, something else could be bad. Check all other connections, and since you drop it, make sure that nothing obvious is broken. Good luck.

• 
  @johncros2281Ай бұрын

  Clothes still look dirty it’s not moving. Better to buy FRONT LOAD WASHING MACHINE

• 
  @averagemaintenance3875Ай бұрын

  Thank you for comenting. I am sure it will help someone to make a decision when shopping for washer.

• 
  @gullreefclub22 күн бұрын

  Unless you don’t have room for a front loader

• 
  @averagemaintenance387522 күн бұрын

  @@gullreefclub Yeah, one of the things to be considered.

• 
  @greerjones9791Ай бұрын

  What a great idea that's very easy to do! Thank you!

• 
  @averagemaintenance3875Ай бұрын

  I agree it is a great idea and wanted to share with everyone. It is a good kids' educational project as well. Thank you for watching and commenting.

• 
  @greerjones9791Ай бұрын

  @@averagemaintenance3875I just made one and it took me all of 10 minutes to do it. I am anticipating a very hot summer this season and I want to supplement my solar drip irrigation system to protect my Urban balcony garden from the heat. I will be making many more to put into my containers.

• 
  @averagemaintenance3875Ай бұрын

  @greerjones9791 Awasome, you already made one. I heard about very hot summer across the country, but looks like we both will be ready.👍

• 
  @jamesbroderick9106Ай бұрын

  Simply the best egg maker out there. I boil the set of eggs and it went like crap. The wife reminded me that she had the shack. And the next 14 eggs came out perfect easy to peel

• 
  @averagemaintenance3875Ай бұрын

  I agree.

• 
  @monkeyboybdАй бұрын

  How long does it take to empty the water bottle?

• 
  @averagemaintenance3875Ай бұрын

  I have not timed it yet, but it depends on how you set it up by opening and closing the cup.

• 
  @quinncawley2787Ай бұрын

  Thank you!

• 
  @averagemaintenance3875Ай бұрын

  You are welcome. Thank you for watching.

• 
  @parkforest434Ай бұрын

  Thank you, very helpful!

• 
  @averagemaintenance3875Ай бұрын

  I am glad you understand and find it helpful. Thank you for watching.

• 
  @paulitorenovato7219Ай бұрын

  I.need.the.size.on.oil.filter.for.2011.toyota.camry.2.4

• 
  @averagemaintenance3875Ай бұрын

  Genuine Toyota oil filter part number is 04152-YZZA1.

• 
  @user-ys9xn8xg9lАй бұрын

  I saw that you connected power to the 2 screws, but did you then leave the internal Battery isolated or did you remove the transit plastic pull piece to power up the battery also?

• 
  @averagemaintenance3875Ай бұрын

  I did not do anything with the battery. I did what you see on video.

• 
  @alittlecookooАй бұрын

  This was probably one of the best maintenance videos for thebEgo thank you!

• 
  @averagemaintenance3875Ай бұрын

  Thank you very much.

• 
  @DogEMewingАй бұрын

  Canada?

• 
  @averagemaintenance3875Ай бұрын

  Dayton, Ohio.

• 
  @Omar39297Ай бұрын

  AV-8 harrier II performing a V-TOL landing

• 
  @averagemaintenance3875Ай бұрын

  Thank you for those details. I think we all need to appreciate and know more about military amazing machines.

• 
  @dunnock343Ай бұрын

  What a useless video. How do you not show how to get the belts on? Why make a video and half ass it?

• 
  @shafilsabbir1247Ай бұрын

  You don't need to unplug the battery

• 
  @averagemaintenance3875Ай бұрын

  Thank you for commenting. Just to be safe.

• 
  @user-oc6qs1po3jАй бұрын

  Well it probly cost 30 grand will show up everyday work non stop no smoke break or lunch or you can buy a regular one for 15 grand hire some one hope they show up. It's kinda like 20 buck min wage fast food will be automated soon too

• 
  @averagemaintenance3875Ай бұрын

  You are right, that is our future.

• 
  @user-oc6qs1po3jАй бұрын

  @averagemaintenance3875 it sucks but it is I did Ruff numbers I bet if you fully automated a fast food joint you make your money back in 5 years an you live 10 more years with no stress

• 
  @nancycathey1401Ай бұрын

  I will try this, thank you

• 
  @averagemaintenance3875Ай бұрын

  Good luck. Thank you for watching and commenting.

• 
  @testtesting2868Ай бұрын

  So many problems with this installation. National code requires the a GFCI outlet. As well, code does not allow the outlet to be installed in the same cavity as the appliance. The outlet is missing the cover. Finally, you have a 20 Amp outlet in what appears to be a 15 Amp (14 gauge) wiring. You didn't show leveling of the appliance. NEVER install sealing tape on compression fitting threads. The threads only hold the compression fitting tight and does nothing for sealing.

• 
  @averagemaintenance3875Ай бұрын

  Thank you for the info. I am sure it will be helpful for others. I will consider electrical suggestions for myself. As for leveling, I did not need to do it.

• 
  @AbiyePerriАй бұрын

  What are the boats belt numbers

• 
  @averagemaintenance3875Ай бұрын

  At 3:44, video mark you have both belts numbers om diagram I have provided.

• 
  @renmamuАй бұрын

  excelente saludos!!

• 
  @averagemaintenance3875Ай бұрын

  Gracias!

• 
  @christopherlarace9458Ай бұрын

  Awesome video! So helpful - THANK YOU!

• 
  @averagemaintenance3875Ай бұрын

  Thank you.

• 
  @Nq11_Ай бұрын

  What is the color of the vehicle?

• 
  @averagemaintenance3875Ай бұрын

  Gray. If you want to see it, you can watch some of my other videos.

• 
  @user-vl3bo4su9wАй бұрын

  So far I have seen two videos and everybody's doing it all wrong do you not realize there's a filter in inside that transmission and then probably three or four magnets that's got that covered metal that you need to get off the magnets and start with fresh clean fluid and a new filter it's like changing your motor oil and not take the old filter off the filters full of metal is full of fibers is full of clutch felt come on guys mechanics if you going to be out there trying to teach somebody how to do things the right way don't do it don't show him the wrong way you can lose a $3,000 transmission job for a 48 dollar filter kit add a roll of shop towels to the clean the pan out and the magnets . Teach it right or don't teach it at all God bless you and Israel.😊ken

• 
  @averagemaintenance3875Ай бұрын

  Thank you for watching and for your time to comment. I know complete procedure that requires more of the professional mechanic and it is a lot more expensive. Plus, it is hard to trust if all that is done correctly. My way is to refresh the condition of fluid and prolong the life of transmission and wanted to share that if someone else could find it useful. So far, my car is 13 years old and still runs well.

• 
  @yveslevac8316Ай бұрын

  Thanks for the video, thats help me a lot 👍🙏

• 
  @averagemaintenance3875Ай бұрын

  I am glad to hear that. Thank you.

• 
  @smile.behappy.andlive2063Ай бұрын

  Thank you so much💎

• 
  @averagemaintenance3875Ай бұрын

  I am glad you find it useful. Thank you for watching and commenting.

• 
  @RL-xb4gzАй бұрын

  Thank God I didn't buy the dryer also what a pile of shit whirlpool became

• 
  @averagemaintenance3875Ай бұрын

  Old good days are gone. Thank you for commenting.

• 
  @Cossack_Cobra2 ай бұрын

  Love FFDP!

• 
  @averagemaintenance38752 ай бұрын

  👍

• 
  @hungryjack102 ай бұрын

  kzread.info/dash/bejne/jI11us1vidS5pM4.html&feature=shared

• 
  @willardroad2 ай бұрын

  Thank you for this. I just bought my second one of these, but the first came assembled so I had never actually done it, start to finish. Watching your video gave me the confidence to complete it. I especially appreciate you emphasizing the order of screws for the arms and back assembly.

• 
  @averagemaintenance38752 ай бұрын

  I am glad to hear that. Thank you for watching.

• 
  @willardroad2 ай бұрын

  @@averagemaintenance3875 Those screws in steps 5 and 6 were the most difficult, but since I saw you do it, I persisted. Some curse words were involved, however. :)

• 
  @averagemaintenance38752 ай бұрын

  @willardroad LOL. But, you did it. That is important.