Why do i not have a red and yellow wire in there? I mean car works perfectly but there is no red and yellow wire anywhere
@jean-claudemorin73772 ай бұрын
Awesome step by step
@reg-gie3 ай бұрын
7:39 can somebody please help me with this part
@JEVA_E466 ай бұрын
I don’t have passenger light foot can I also have the fade ?
@raykal66916 ай бұрын
Hey. Nice video. From the look i believe you have a 325XI. So by default you have the high beam as DRLs lighting low when engine is running. Does this wiring harness affect those?? or your disabled your DRLs
@flexer4767 ай бұрын
what size are your rings? 2 x 146mm + 2 x 131mm?
@CFM4ST3R4 ай бұрын
facelift e46 wagon/sedan with projector (xenon) 4x131mm
@Im_maxxsor60578 ай бұрын
Way too much work
@undergroundlegend198 Жыл бұрын
Took risky to play around with power cable,the risk is not worth it
@swavy2634 Жыл бұрын
Why do mines have like black adhesive
@eric.choi0811 Жыл бұрын
Great video!
@mertcapkin7263 Жыл бұрын
How do you determine which lug nut to take off?
@devdinside Жыл бұрын
If the car is propped up, you can rotate the tire so the lug nut hole hovers over that area towards the spindle. Make sure you're not in gear so it will let the drive shaft n such spin to rotate the desired wheel. The spindle is on the top right area for driver side, and top left on the passenger side.
@cighirraul3723 Жыл бұрын
hi for bmw x3 e83 what is the wire from the ecu? package M?
@lilmacfarlan3 Жыл бұрын
Definitely on my list of stuff to do.
@OzgurOz38 Жыл бұрын
What size are these rings?
@CFM4ST3R4 ай бұрын
4x131
@MOHAMMED_LEXUS Жыл бұрын
How many mm is the angel eyes for E46 ?
@jxmes._.917 Жыл бұрын
Did you find out?
@alvaro472 Жыл бұрын
If my e46 dont have foot lights in interior? I cant turn on at open car?
@skyflash9905 Жыл бұрын
Choose other interior light
@kaywonderer Жыл бұрын
I have to install these to maybe stop people from turning infront of me and get more road presence. tired of it.
@ONI37 Жыл бұрын
Installed my angel eyes just like this 2 weeks later the whole wire was burned and the angel eyes didn't work. Nothing comes to my mind why this happened.
@Cris650_ Жыл бұрын
you probably put one of the wires next to somewhere in the engine that gets hot and it burned it up
@christiandiaz9433 Жыл бұрын
Terrible idea . They only stay on if your glove box light is on . Turns off when the lights turn off .
@namvo3909 Жыл бұрын
But it worked for him. Right?
@youngflyfella2 жыл бұрын
Bro why do you sound like a chickmunk 😂
@taylorervin3340 Жыл бұрын
Bro why don’t you know how to spell chipmunk? lol
@youngflyfella Жыл бұрын
@@taylorervin3340 it's auto correct but it's ok at least you know what I meant lol
@danrexxd80542 жыл бұрын
RIP BMW E39, He has batery in trunk 😂
@alifrozaan2 жыл бұрын
I want buy. Thats 131mmx4? Or 131mm and 141 mm?
@Lucky-fg9ug2 жыл бұрын
Отличное видео! Молодец брат👍🏻 Почему редко видео выходят?
@tjacero232 жыл бұрын
I have a question i have the iJDMtoy lighting (angel eyes) with three wire (black red and white) I have successfully installed the wires but whenever I try to turn off the car and lock it the angel eyes (halo) are still on and wont shut off/turn off. Can someone explain this to me?
@tjacero232 жыл бұрын
I had problems with my. Angel eyes . They wont turn off . Can someone help me out
@lusa76732 жыл бұрын
still on
@deamonkiller28522 жыл бұрын
I have the ABS lines where the fire is. How would I go about doing it?
@DanioKenio12 жыл бұрын
Thnx dude, the official procedure is as follows: 1) release the handbrake 2) click until the wheel blocks 3) click 18 times in the opposite direction 4) start on the rear left and go to the rear right 5) finished 😉
@mertcapkin7263 Жыл бұрын
Where did you get this official procedure from?
@davidvieira38042 жыл бұрын
Everything made sense until u didn’t show how to tap it into the accessory wires
@davidvieira38042 жыл бұрын
Should’ve shown us
@johnnycash13652 жыл бұрын
I was lazy and just tightened up the 2 nuts either side of the handbrake. Works fine for now but will do this method next time around.
@icyw0lf9372 жыл бұрын
Hi i want to connect the angel eye with my car's footwell light and also instead of turning the led on and of only when the engine is switched on or off i want the led to be on only when i want to turn them on and off for example by help of some kind of button or switch could you let me know on how to do that instead of the ecu
@supdougs44872 жыл бұрын
Honestly bro all you have to do is buy a switch from Amazon and then tap it into the wires for Angel eyes and then wire it to your dashboard or where ever you want it lol
@danielallen17712 жыл бұрын
Tap into the fog lights for power instead
@icyw0lf9372 жыл бұрын
Hi I have a 2007 lexus isf and i just got my angel eyes today thinking of doing the same can i just use a switch to turn and of the angel eyes ? And would they fade if i connect turn them on and off by witch ?
@MysticMachina2 жыл бұрын
Its called defusing lights😂😂
@rsobral5602 жыл бұрын
Can I do this on an e46 compact?
@user-lk8nq4zn7s2 жыл бұрын
Спасибо мне понравилось, привет из ЖД вокзала!
@je46672 жыл бұрын
hey i followed the steps perfectly but my outside lights are the only ones that turn on. any idea to fix that?
@Nemesiz002 жыл бұрын
What is the red and yellow wire? I have the same exact set of rings, but finding the right cable on my e39 is a nightmare..
@CFM4ST3R4 ай бұрын
The red one is for the ignition Signal, without the red one the light wont work. The white is for the fade in Effect. Just put everything together (positive and negative and Connect the cable to the rings. After that u take the red cable and u go to the fuse box in the engine Bay and u search for a red/yellow cable, dont connect them yet, just try to put it at the metal From the wire in the box and Check if the Rings are working, of they dont u have to try another
@michaelcarter52 жыл бұрын
Nice car
@MrThegenral12 жыл бұрын
Hello bro what is the name of this kit and where do I buy it from?
@raulc20152 жыл бұрын
That flashing on also is a cool effect, like a old lightbulb
@geargrinder692 жыл бұрын
Does anyone know how to have it so that it's always amber? Thanks
@christofferlahn-johannesse76002 жыл бұрын
If you dont want the fade in effect, what do you do with the white wire for the glovebox light?
@kailalynn7982 жыл бұрын
I would like to know that too
@MondziakGPL2 жыл бұрын
Nothing
@artursrutins18722 жыл бұрын
I dont have that yellow and red wire, dont know how to tell whitch one is neccesary to tap
@artursrutins18722 жыл бұрын
Tried to tap red and white, unlucky, angel eyes didnt turn on
@xLordStormx2 жыл бұрын
i know this is an old vid but i'm looking to get some angel eyes but i have to ask, do we have to tap into the wires in the ecu box?
@willemgijs38032 жыл бұрын
I don't believe so?
@willemgijs38032 жыл бұрын
Mostly plug and play. Only place you have to tap in is foot light to have it come on when you unlock the car
@empireoj Жыл бұрын
@@willemgijs3803 i don't have the foot light 😥😩
@willemgijs3803 Жыл бұрын
@@empireoj i think it can be done another way too. Not sure tho. Just get a garage to do it haha. 50 euro maybe
@dlovanfitness66632 жыл бұрын
Hello, can you tell me what is the name of this piece under the spotlight because I need to buy it please help me
@marianofacciuto78922 жыл бұрын
RUBBISH !!! 🤯🤯🤪
@destinyinthavongsa5512 жыл бұрын
Can someone help! I hooked my halos up perfectly fine but when they couldn’t turn off I just unplugged the halos from the harness and the harness plugged touch a bolt it shut off all for of the halos at once now they won’t work. ANY ADVICE WILL HELP ME PLEASE. Should I just order a new harness or a whole new kit?
@thomasmueller23192 жыл бұрын
yes probably shorted it, get a new set try again,
@kd-kz5dy3 жыл бұрын
how'd you tap into the ignition wire? I think this part is rather critical; if you don't do it correctly it could keep the car from starting
@jacksonkillilea2 жыл бұрын
Could probably just use a fuse tap.
@GeorgeZaharia11 ай бұрын
u dont need to tap into nothing this things usually are hooked the position lights, not full battery i dont know why he hooked them up like that the moment u hook them to battery they should burn cause u get full 12v and usually they are 5v inputs like the small bulb u have there for position lights. if u tap into daylight lights is a goner again.
@Jwips.9 ай бұрын
@@GeorgeZahariaso where should we tap them into ?
@harryjohnson77147 ай бұрын
It’s not ignition it’s ACC, it’s the wire that gets power when the ignition is on. That’s not the wire that solely gives power to the ignition
Пікірлер
You are the best man 💪 thanks
Why do i not have a red and yellow wire in there? I mean car works perfectly but there is no red and yellow wire anywhere
Awesome step by step
7:39 can somebody please help me with this part
I don’t have passenger light foot can I also have the fade ?
Hey. Nice video. From the look i believe you have a 325XI. So by default you have the high beam as DRLs lighting low when engine is running. Does this wiring harness affect those?? or your disabled your DRLs
what size are your rings? 2 x 146mm + 2 x 131mm?
facelift e46 wagon/sedan with projector (xenon) 4x131mm
Way too much work
Took risky to play around with power cable,the risk is not worth it
Why do mines have like black adhesive
Great video!
How do you determine which lug nut to take off?
If the car is propped up, you can rotate the tire so the lug nut hole hovers over that area towards the spindle. Make sure you're not in gear so it will let the drive shaft n such spin to rotate the desired wheel. The spindle is on the top right area for driver side, and top left on the passenger side.
hi for bmw x3 e83 what is the wire from the ecu? package M?
Definitely on my list of stuff to do.
What size are these rings?
4x131
How many mm is the angel eyes for E46 ?
Did you find out?
If my e46 dont have foot lights in interior? I cant turn on at open car?
Choose other interior light
I have to install these to maybe stop people from turning infront of me and get more road presence. tired of it.
Installed my angel eyes just like this 2 weeks later the whole wire was burned and the angel eyes didn't work. Nothing comes to my mind why this happened.
you probably put one of the wires next to somewhere in the engine that gets hot and it burned it up
Terrible idea . They only stay on if your glove box light is on . Turns off when the lights turn off .
But it worked for him. Right?
Bro why do you sound like a chickmunk 😂
Bro why don’t you know how to spell chipmunk? lol
@@taylorervin3340 it's auto correct but it's ok at least you know what I meant lol
RIP BMW E39, He has batery in trunk 😂
I want buy. Thats 131mmx4? Or 131mm and 141 mm?
Отличное видео! Молодец брат👍🏻 Почему редко видео выходят?
I have a question i have the iJDMtoy lighting (angel eyes) with three wire (black red and white) I have successfully installed the wires but whenever I try to turn off the car and lock it the angel eyes (halo) are still on and wont shut off/turn off. Can someone explain this to me?
I had problems with my. Angel eyes . They wont turn off . Can someone help me out
still on
I have the ABS lines where the fire is. How would I go about doing it?
Thnx dude, the official procedure is as follows: 1) release the handbrake 2) click until the wheel blocks 3) click 18 times in the opposite direction 4) start on the rear left and go to the rear right 5) finished 😉
Where did you get this official procedure from?
Everything made sense until u didn’t show how to tap it into the accessory wires
Should’ve shown us
I was lazy and just tightened up the 2 nuts either side of the handbrake. Works fine for now but will do this method next time around.
Hi i want to connect the angel eye with my car's footwell light and also instead of turning the led on and of only when the engine is switched on or off i want the led to be on only when i want to turn them on and off for example by help of some kind of button or switch could you let me know on how to do that instead of the ecu
Honestly bro all you have to do is buy a switch from Amazon and then tap it into the wires for Angel eyes and then wire it to your dashboard or where ever you want it lol
Tap into the fog lights for power instead
Hi I have a 2007 lexus isf and i just got my angel eyes today thinking of doing the same can i just use a switch to turn and of the angel eyes ? And would they fade if i connect turn them on and off by witch ?
Its called defusing lights😂😂
Can I do this on an e46 compact?
Спасибо мне понравилось, привет из ЖД вокзала!
hey i followed the steps perfectly but my outside lights are the only ones that turn on. any idea to fix that?
What is the red and yellow wire? I have the same exact set of rings, but finding the right cable on my e39 is a nightmare..
The red one is for the ignition Signal, without the red one the light wont work. The white is for the fade in Effect. Just put everything together (positive and negative and Connect the cable to the rings. After that u take the red cable and u go to the fuse box in the engine Bay and u search for a red/yellow cable, dont connect them yet, just try to put it at the metal From the wire in the box and Check if the Rings are working, of they dont u have to try another
Nice car
Hello bro what is the name of this kit and where do I buy it from?
That flashing on also is a cool effect, like a old lightbulb
Does anyone know how to have it so that it's always amber? Thanks
If you dont want the fade in effect, what do you do with the white wire for the glovebox light?
I would like to know that too
Nothing
I dont have that yellow and red wire, dont know how to tell whitch one is neccesary to tap
Tried to tap red and white, unlucky, angel eyes didnt turn on
i know this is an old vid but i'm looking to get some angel eyes but i have to ask, do we have to tap into the wires in the ecu box?
I don't believe so?
Mostly plug and play. Only place you have to tap in is foot light to have it come on when you unlock the car
@@willemgijs3803 i don't have the foot light 😥😩
@@empireoj i think it can be done another way too. Not sure tho. Just get a garage to do it haha. 50 euro maybe
Hello, can you tell me what is the name of this piece under the spotlight because I need to buy it please help me
RUBBISH !!! 🤯🤯🤪
Can someone help! I hooked my halos up perfectly fine but when they couldn’t turn off I just unplugged the halos from the harness and the harness plugged touch a bolt it shut off all for of the halos at once now they won’t work. ANY ADVICE WILL HELP ME PLEASE. Should I just order a new harness or a whole new kit?
yes probably shorted it, get a new set try again,
how'd you tap into the ignition wire? I think this part is rather critical; if you don't do it correctly it could keep the car from starting
Could probably just use a fuse tap.
u dont need to tap into nothing this things usually are hooked the position lights, not full battery i dont know why he hooked them up like that the moment u hook them to battery they should burn cause u get full 12v and usually they are 5v inputs like the small bulb u have there for position lights. if u tap into daylight lights is a goner again.
@@GeorgeZahariaso where should we tap them into ?
It’s not ignition it’s ACC, it’s the wire that gets power when the ignition is on. That’s not the wire that solely gives power to the ignition
E39...Can you help me... Please
Good job