Пікірлер

• 
  @TrevorAvrettКүн бұрын

  I like this guy. Empowers his customers with knowledge to make the best decision instead of trying to take advantage of them. He would undoubtedly get my repeat business as a customer

• 
  @TiaKDubКүн бұрын

  Very helpful!!!

• 
  @stormrisen777Күн бұрын

  This is exactly what my car is doing right now. Thanks for the information my friend, I'll be getting this taken care of as soon as possible.

• 
  @jstrole814Күн бұрын

  Thanks for the vid!!

• 
  @thebayykid1820Күн бұрын

  Thanks mann

• 
  @thebayykid1820Күн бұрын

  “Remember your flat right”

• 
  @JoseRodriguez-tx6hm2 күн бұрын

  Esa página cobra ?

• 
  @felipec45002 күн бұрын

  I bought a 06 Silverado 4x4 with a 4.8 nd when I got it the oil pressure was max out nd stayed there. Had a knock sensor light on also. Got both knock sensors replace nd oil pressure replaced. Now it’s says low oil pressure. It would go up nd down nd when idle it will drop . any ideas of it ? Nd idk why but knock sensor light keeps coming on after replacing em can somebody help me out on ideas?

• 
  @NOAHJOSHUA352 күн бұрын

  Thank you brother!

• 
  @jessicajames7183 күн бұрын

  I just fixed my radio different website now codegen

• 
  @FalconsGarage3 күн бұрын

  @@jessicajames718 what site did you use?

• 
  @yungmavo3 күн бұрын

  Tried this over 10 times but it never resets to 74. It stays at 60. What am i doing wrong @falcon?

• 
  @FalconsGarage3 күн бұрын

  @@yungmavo is the ac system working properly? Meaning the mechanical aspect of it … compressor, condenser, belts etc?

• 
  @knaguy4 күн бұрын

  what vehicle was that?

• 
  @trustlife215 күн бұрын

  Yeah that’s the passenger side the driver side is at the bottom there’s actually four actuators

• 
  @nickolico5 күн бұрын

  Great video! Thank you

• 
  @eliseorodriguez70235 күн бұрын

  Home bro.

• 
  @JasonY025 күн бұрын

  The pump doesn’t fail it’s the crappy O ring that dows

• 
  @Darjan_Spasojevic5 күн бұрын

  My 2022 trax, same set up didn't work.

• 
  @aaronvelazquez56995 күн бұрын

  Pregunta falcons garage el gasket del intake es solo una pieza o dos piezas y gracias por tu vídeo muy bien explicado

• 
  @shmagglehammer5 күн бұрын

  Yeah, the fucking website isn’t there anymore.

• 
  @isabellafaythe13225 күн бұрын

  i have a 2016 chevy trax and mine doesn't have the things to pull out with the pliers?

• 
  @heathbaggett78085 күн бұрын

  I can't turn my key to the on position to release the cylinder

• 
  @jonathanblackwelder2377 күн бұрын

  Awesome video thank you so much!

• 
  @mitchellarias62067 күн бұрын

  Perfectly explained thank you!!

• 
  @JoseLopez-bb1vq7 күн бұрын

  ❤ thank you I just replaced mine on a 2019 Chevy trax . You video was really helpful. Thank you.

• 
  @bornonthebayou56687 күн бұрын

  Excellent

• 
  @aidoist7 күн бұрын

  My 2016 F250 6.2, is giving me a knock sensor code, loud ticking and power loss….going to replace all 16 spark plugs, 8 coil packs and both knock sensors….just gonna do it all, hope it fixes my issue

• 
  @Mr9Kyuubi7 күн бұрын

  Of course (1) would be misfiring on mine. Appreciate the video. Big help

• 
  @jefff68847 күн бұрын

  The 12 Impala location is so easy to get to. On the 15 and ups it's behind the intake smh

• 
  @eyanperry86458 күн бұрын

  Did mine today. For some reason the cooling fans were on full blast when I started it back up. Shut it off again and restarted, back to normal 🤔

• 
  @charlie905018 күн бұрын

  I just wanted to thank you for this tip!! I have a 2008 Rogue and it fixed the same problem. 🤙🏻

• 
  @maximusvonce13818 күн бұрын

  If the boot is sealed and not leaking, the joint should be fine

• 
  @funnythingz3658 күн бұрын

  over charged buy the relay for 25 call it a day

• 
  @Dust41309 күн бұрын

  You have solved all my problems.

• 
  @jamesgray28109 күн бұрын

  I just did this....and most definitely it worked....thanks my guy

• 
  @Joeyhill-wj6js10 күн бұрын

  Would this happen to the mk2 2.5st? I’m having the same problem brand new battery alternator

• 
  @FalconsGarage10 күн бұрын

  Yes. If it has runners. Yes.

• 
  @gerardoacosta528310 күн бұрын

  How exactly did you mount the pulley back in? Any special bolt to tighten it back on or just place it on tighten it? I’m having a hard time

• 
  @audaciousmaster714411 күн бұрын

  When I remove fuse and turn the engine on my auto says 61. Any suggestions

• 
  @alonsodiaz92611 күн бұрын

  Great video.. this Mexican Sid from Ice Age is straight to the point not talking about how "I had to take my daughter to the dentist & then we passed by starbucks" just... "Remove this sh*t check here boom boom done!" 🏆👍👍

• 
  @sundance27012 күн бұрын

  Thanks for the video, very helpful!

• 
  @chrissychriscross12 күн бұрын

  Thank you so much 🙏.

• 
  @FalconsGarage12 күн бұрын

  You're most welcome

• 
  @user-vu5dt9lb4d13 күн бұрын

  I just reset mine, it was easy. Thanks for the video.

• 
  @FalconsGarage12 күн бұрын

  You're welcome!

• 
  @Armando-rf9ul13 күн бұрын

  Thank you!

• 
  @FalconsGarage13 күн бұрын

  Welcome!

• 
  @timothyweiss221913 күн бұрын

  I did this caliubration and it totally fixed my issue... which was ... the left (Drivers side) and right (Passenger side) temperature would not syncronize to the drivers side control dial, I always had to turn the dials for both sides up or down. They were acting sepperately. Now the arrows at bottom of temp display are both on and the temp can be controlled for Both sides simultaneously by the one dial ! Thank you for this video !!!

• 
  @FalconsGarage13 күн бұрын

  Glad I was able to help!

• 
  @Dust413013 күн бұрын

  Some say they even might still work.

• 
  @FalconsGarage13 күн бұрын

  maybe ...

• 
  @Dust413013 күн бұрын

  This is great. I have had a pice of electrical tape over my oil change light for years.

• 
  @FalconsGarage13 күн бұрын

  haha

• 
  @toxophilite316214 күн бұрын

  Thanks bro'

• 
  @denisealston631214 күн бұрын

  Good video but I still will be taking this to the mechanic😮

• 
  @FalconsGarage13 күн бұрын

  that's ok if your comfortable doing the repair .. but now you have an idea of what they are doing.

• 
  @denisealston631213 күн бұрын

  @FalconsGarage Yeah you're right because I took my car up to Valvoline and they put a cabin air filter in but they put it wrong and it was upside down​.

• 
  @definitelydewalt161215 күн бұрын

  🪔🪔🪔 🪔🪔🪔🪔🪔🪔🪔🪔🪔

• 
  @hcfirefighter8215 күн бұрын

  Thank you for this!

• 
  @iandacayo516815 күн бұрын

  Can i remove my condenser without vacumming the freon?

• 
  @FalconsGarage12 күн бұрын

  Well technically if you had a leak is probably empty anyways. So in that case YES. But you will need to vacuum the system before Freon goes in