In total how long would you say it takes to make the whole thing?
@user-vm1xj2bb8p2 ай бұрын
But it can't flap like wings
@unknown007irlb62 ай бұрын
I’m here! Sorry I’m a bit late Edit 1: Question, since you said that this will be the last version of the mini wings and that you’re working on the full size right now, what might you change on the full size? Move the base onto the side so you might be able to wear it? Also when you perfect your design & are happy with it what do you do then ; start with how to put feathers on it and adjust things from there? Lastly why do you make the wings in the first place? For fun, a hobby, maybe you’re into cosplay? What is the reason?
@Jaconator2 ай бұрын
Sorry in advance this reply is long. V.3 of the life size wings will have a much smaller back plate. The back plate will be able to be easily taken apart, so if a part breaks a replacement can be easily put in. It will have improved hinge design, and few other improvements. In the video “cosplay wings (V.2)” the wings were put on a stand, so I could put the feathers on without damaging them. The extra PVC around the back plate was just to hold it. The back plate that holds all the electronics on the full size V.2 cosplay wings is very bulky, so I’m working on making it much smaller. Like 8in x 6in instead of the 21in x 12in that it is (same thickness 4-6 in). The “feathers” are complicated because they have to move with the wings. So making the “feathers” attach to the wings while also making them move only a specific amount for each “feather”, will take some time to figure out. I want to have a fully finished pair of wings before I make the video about V.3. So that it is just one video and is actually completed compared to my previous designs. The purpose of the mini wings is to be a proof of concept for the life size ones. The wings are for cosplay but I’m not much of a cosplayer, so other people can use my designs to make their own wings when I finish V.3. I’ll make a community post on my channel to show the progress of cosplay wings V.3.
@user-vm1xj2bb8p3 ай бұрын
What's its total weight ya
@DonaldYEastArtist4 ай бұрын
Like your model
@wolfchild474 ай бұрын
What gauge wire is the red and black wire?
@unknown007irlb65 ай бұрын
May I ask if you are going to continue with the experimental wings?
@Jaconator5 ай бұрын
Yes, Currently I am finishing Version 3 of the mini wings and it will be on my channel by the end of January. Then hopefully by the end of February, I’ll have the design finished and everything printed for version 3 of the Life Size Wings. The back/central part will be a quarter the size of the previous version.
@unknown007irlb65 ай бұрын
@@JaconatorThanks!
@Neil1957-5 ай бұрын
It would be great if this was spoken in English.
@ChasePowlish-cl1xhАй бұрын
It is...?
@HarveyChen2536 ай бұрын
Hi this is Harvey from PCBWay and we are very intersted in your contents relating 3DPrinting. Where can we reach u for more detials on some collab? if you are interested
@LocalPostal7 ай бұрын
Could you please type out the full version of #4 on the list?
@LocalPostal7 ай бұрын
How wide are the wings?
@bonitacasique51658 ай бұрын
Wat size of pvc is it? And do u have each cut size? 😅
@bonitacasique51659 ай бұрын
Hello like ur work have a few questions 😁 #1 can it be done to use a control #2 is ur battery chargeble?
@copaslopez9 ай бұрын
Excellent work. What battery pack are you using for this?
@mrkey89959 ай бұрын
keo la keo gi vay ạ
@Blendershick11 ай бұрын
keep it up!
@abbiemiller623011 ай бұрын
Hello I wanted to make wings for my cosplay and I found your tutorial and it’s amazing I have question what was all the electronic things you used?
@animekissucosplay1223 Жыл бұрын
What are the measurements for where you placed the snap hinges?
@Chloes2068 Жыл бұрын
Would you be able to leave a link to the exact linear actuator that you got? I can’t find the right one 😢
@Jaconator Жыл бұрын
DEMOTOR PERFORMANCE 4 Inch 4" Stroke Linear Actuator 12 Volt 12V 225 Pounds lbs Maximum Lift,Black a.co/d/9Rvx9Pk
@logha3902 Жыл бұрын
What is the name of your item? Item 10:45 ?? Two item ♡
@logha3902 Жыл бұрын
I don't have that item in my country :(
@Jaconator Жыл бұрын
@@logha3902 It is a 3D printed part that I designed. And im showing the progression of how I made them better.
@ericksanchezbonnet18313 ай бұрын
are you sharing the £D printer desogned??@@Jaconator . Thank you!!
@kensalvatore4672 Жыл бұрын
I'm thinking of doing wings for my next cosplay, but I don't have the knowledge on how to do it... This is way too complicated for me 😞
@chubbihamster Жыл бұрын
is the entire wingspan 10 ft or only one wing?
@Jaconator Жыл бұрын
10ft total
@averymanco5804 Жыл бұрын
This tutorial is very helpful! Im making my cosplay for howls beast version so thank you :)
@downearth48 Жыл бұрын
Thats the exact same reason I came across this video haha!
@Jaconator Жыл бұрын
Version 2 is out now, kzread.info/dash/bejne/eW11xLezaarInag.html
@Jaconator Жыл бұрын
Version 2 is out now kzread.info/dash/bejne/eW11xLezaarInag.html
@mrkey89959 ай бұрын
keo dán là gì vậy ạ
@Jaconator9 ай бұрын
@@mrkey8995Contact Cement Adhesive
@JimmNeutricity Жыл бұрын
I see the parts list but how many of what was used? If you have direct links to sites you bought them from then that’d be helpful
@DrinkTeaOrDiePlays Жыл бұрын
I'm so excited to see version 2!!! These look amazing!
@Adrianasworld_2 жыл бұрын
How many inches does your linear go up?
@clairemiller69812 жыл бұрын
This is really cool! How would you go about scaling the proportions of the design for slightly smaller wings?
@Jaconator2 жыл бұрын
Why do I sound like a robot? TF
@Adrianasworld_2 жыл бұрын
What are the pcv pipes measurements
@nadinebailey54392 жыл бұрын
I’m so glad you put this video up. I’ve wanted retractable Angel wings, but didn’t know how to make them. Can’t wait to see the finished product.
@stevetassie54792 жыл бұрын
what amp is the On/off/on toggle switch
@kurtjurgen2 жыл бұрын
nice flight!
@dylangulledge89802 жыл бұрын
Did u ever finish part 2 for the wings
@andrewjabaly93893 жыл бұрын
did you ever finish this thing cause I'm trying to build this myself
@harpy30743 жыл бұрын
How much does the whole set cost to make?
@Jaconator3 жыл бұрын
Probably around $100. I’m making a better version, but it will be a while before V.2 is done
@remtt3 жыл бұрын
AAA YOU'RE COOL BRO
@Jaconator3 жыл бұрын
It’s gonna be a bit till I put version 2 together. Version 2 will be even simpler and look a lot cleaner.
@LadyMae063 жыл бұрын
You are a genius. I'm trying to make my own wings 😩 and all the other cosplay videos I watch were to complicated. I love your style and I'm going to try it
@dylangulledge89803 жыл бұрын
Sorry I’m impatient
@Jaconator3 жыл бұрын
No worries, so what I’m doing now is making a version 2, that will look a lot better and work better. And it’ll all be in one video. The reason its taking forever is 3d printing takes time.
@dylangulledge89803 жыл бұрын
Where is part 3
@arjunajikumar26493 жыл бұрын
What did you use to make the feathers?
@Jaconator3 жыл бұрын
EVA-38 foam sheets 2mm
@pietanicev10443 жыл бұрын
Yo it’s coming along great. This is so cool
@katra22323 жыл бұрын
Dude you are like the most underrated person in the world
@demonicangel33783 жыл бұрын
Is there a way that I could do this without any machanics or electronics at all?
Пікірлер
In total how long would you say it takes to make the whole thing?
But it can't flap like wings
I’m here! Sorry I’m a bit late Edit 1: Question, since you said that this will be the last version of the mini wings and that you’re working on the full size right now, what might you change on the full size? Move the base onto the side so you might be able to wear it? Also when you perfect your design & are happy with it what do you do then ; start with how to put feathers on it and adjust things from there? Lastly why do you make the wings in the first place? For fun, a hobby, maybe you’re into cosplay? What is the reason?
Sorry in advance this reply is long. V.3 of the life size wings will have a much smaller back plate. The back plate will be able to be easily taken apart, so if a part breaks a replacement can be easily put in. It will have improved hinge design, and few other improvements. In the video “cosplay wings (V.2)” the wings were put on a stand, so I could put the feathers on without damaging them. The extra PVC around the back plate was just to hold it. The back plate that holds all the electronics on the full size V.2 cosplay wings is very bulky, so I’m working on making it much smaller. Like 8in x 6in instead of the 21in x 12in that it is (same thickness 4-6 in). The “feathers” are complicated because they have to move with the wings. So making the “feathers” attach to the wings while also making them move only a specific amount for each “feather”, will take some time to figure out. I want to have a fully finished pair of wings before I make the video about V.3. So that it is just one video and is actually completed compared to my previous designs. The purpose of the mini wings is to be a proof of concept for the life size ones. The wings are for cosplay but I’m not much of a cosplayer, so other people can use my designs to make their own wings when I finish V.3. I’ll make a community post on my channel to show the progress of cosplay wings V.3.
What's its total weight ya
Like your model
What gauge wire is the red and black wire?
May I ask if you are going to continue with the experimental wings?
Yes, Currently I am finishing Version 3 of the mini wings and it will be on my channel by the end of January. Then hopefully by the end of February, I’ll have the design finished and everything printed for version 3 of the Life Size Wings. The back/central part will be a quarter the size of the previous version.
@@JaconatorThanks!
It would be great if this was spoken in English.
It is...?
Hi this is Harvey from PCBWay and we are very intersted in your contents relating 3DPrinting. Where can we reach u for more detials on some collab? if you are interested
Could you please type out the full version of #4 on the list?
How wide are the wings?
Wat size of pvc is it? And do u have each cut size? 😅
Hello like ur work have a few questions 😁 #1 can it be done to use a control #2 is ur battery chargeble?
Excellent work. What battery pack are you using for this?
keo la keo gi vay ạ
keep it up!
Hello I wanted to make wings for my cosplay and I found your tutorial and it’s amazing I have question what was all the electronic things you used?
What are the measurements for where you placed the snap hinges?
Would you be able to leave a link to the exact linear actuator that you got? I can’t find the right one 😢
DEMOTOR PERFORMANCE 4 Inch 4" Stroke Linear Actuator 12 Volt 12V 225 Pounds lbs Maximum Lift,Black a.co/d/9Rvx9Pk
What is the name of your item? Item 10:45 ?? Two item ♡
I don't have that item in my country :(
@@logha3902 It is a 3D printed part that I designed. And im showing the progression of how I made them better.
are you sharing the £D printer desogned??@@Jaconator . Thank you!!
I'm thinking of doing wings for my next cosplay, but I don't have the knowledge on how to do it... This is way too complicated for me 😞
is the entire wingspan 10 ft or only one wing?
10ft total
This tutorial is very helpful! Im making my cosplay for howls beast version so thank you :)
Thats the exact same reason I came across this video haha!
Version 2 is out now, kzread.info/dash/bejne/eW11xLezaarInag.html
Version 2 is out now kzread.info/dash/bejne/eW11xLezaarInag.html
keo dán là gì vậy ạ
@@mrkey8995Contact Cement Adhesive
I see the parts list but how many of what was used? If you have direct links to sites you bought them from then that’d be helpful
I'm so excited to see version 2!!! These look amazing!
How many inches does your linear go up?
This is really cool! How would you go about scaling the proportions of the design for slightly smaller wings?
Why do I sound like a robot? TF
What are the pcv pipes measurements
I’m so glad you put this video up. I’ve wanted retractable Angel wings, but didn’t know how to make them. Can’t wait to see the finished product.
what amp is the On/off/on toggle switch
nice flight!
Did u ever finish part 2 for the wings
did you ever finish this thing cause I'm trying to build this myself
How much does the whole set cost to make?
Probably around $100. I’m making a better version, but it will be a while before V.2 is done
AAA YOU'RE COOL BRO
It’s gonna be a bit till I put version 2 together. Version 2 will be even simpler and look a lot cleaner.
You are a genius. I'm trying to make my own wings 😩 and all the other cosplay videos I watch were to complicated. I love your style and I'm going to try it
Sorry I’m impatient
No worries, so what I’m doing now is making a version 2, that will look a lot better and work better. And it’ll all be in one video. The reason its taking forever is 3d printing takes time.
Where is part 3
What did you use to make the feathers?
EVA-38 foam sheets 2mm
Yo it’s coming along great. This is so cool
Dude you are like the most underrated person in the world
Is there a way that I could do this without any machanics or electronics at all?
could try with strings
GREAT THINKING !!! THANKS.