Пікірлер

• 
  @pontushaggstrom62615 күн бұрын

  1:07 Hey, m46od! 1:15 The "b" family could refer to every engine they made since 1944 (B4B) to the 2010's (B63XX engines). Soltierally every gas engine they ever made. The b19, b21, b23, b200 and b230 were all very similar to one another, and i guess you could call them the "redblock" family, or just Volvo SOHC 8v family. Then there was also the 4valve b204 & b234, tho these werejust b200 and b230 engines with another head. 2:13 there were dohc versions! 2:46 This is an issue with all old engines. Ignition parts, rotors & caps wears out. 3:10 B230s can safely do 200-250hp, if set up right. At 300hp you're pushing it. The turbo var. of these engines only did 170-180hp or so from factory! 3:57 Got a 1987 740 gle (early model, so 1986 body) and wires are holding up good. Might depend on where you live, of course. Not an issue with the engine itself tho. 4:44 Depends on which year of b230f, the ones with lh2.2 had a sensor in the distributor instead. 4.54 Another common issue with the b230E is the car could be blowing a 25A fuse (no. 12 or 13, dont remember),in that case your fuel relay could be defective (happend to me and i had to tow my car) It is a green relay sitting behind the fuses in the same plastic box. 6:28 Woah! That there is a late 144 (1972?). Which means its probably rocking a b20! wrong clip:( Still sounds great

• 
  @robertdelgado33118 күн бұрын

  I have a 2000 Nissan frontier I would like to know if I could use the iron block off of a Altima around the same year and if the cylinder heads are compatible as well please help me I've been searching for a frontier engine and all I can find right now is Altima engine

• 
  @zbychoandronik13 күн бұрын

  Poland🇵🇱❤️

• 
  @marcinjedrol13 күн бұрын

  Polskaaaaa

• 
  @nissan200214 күн бұрын

  In the S15 SR20 they updated the oil pickup. It has a slotted oil pick up so if the sump gets damaged your engine wont get starved of oil.

• 
  @marcinjedrol13 күн бұрын

  Thanks for the insight!

• 
  @grebo838224 күн бұрын

  4:57 "not a single pantie dry" for anybody wondering what it says on the rear window

• 
  @marcinjedrol22 күн бұрын

  😂😂

• 
  @brandondixon882325 күн бұрын

  What ITB Setup is this? Kit or custom?

• 
  @marcinjedrol22 күн бұрын

  Twin fajs carbs and stacks I 3D printed

• 
  @robbrown349526 күн бұрын

  As someone new to the s chassis and sr20 I appreciate the research and insight

• 
  @marcinjedrol22 күн бұрын

  Hey much appreciated!

• 
  @Driftit29 күн бұрын

  Wifes had her 200sx for nearly 20 years now. Tuned to a reliable 245rwkw. I would add an oil cooler, delete the shitty CAS and replace with a trigger kit, convert to Audi coil packs, replace the junk old loom. Lots of people mistake the Temp sensors for causing their hard hot starts, however it is more often caused by a failing CAS. This only becomes apparent when tuning and seeing live data like on a dyno. The aging loom can also cause the temp sensor not to read or spike on occasion.

• 
  @marcinjedrol22 күн бұрын

  That’s what I found about these engines. They are old, used to be cheap and everyone trashed them. But with a little of maintenance and perseverance they can be reliable and rewarding :)

• 
  @Driftit22 күн бұрын

  @@marcinjedrol I was probably one of those that advised some people to "upgrade" to an SR20 from their CA18 20 years back. All my 180sx's were SR powered and I never gave the CA a chance. I never bothered to learn more about the CA until I started working on the now wifes car. Variety in performance part brands is an issue compared to the SR though.

• 
  @marcinjedrol22 күн бұрын

  @@Driftit If you think about it, CA in its bare idea should be better than SR, since it's an iron block, has strong crank stock, also comes with crank girdle, direct acting cams, all things a guy needs to do some real fast stuff. But as you said, people neglect them and it results in poor opinions

• 
  @benjaminnurmentaus4232Ай бұрын

  What is your opinion on B234 or B204 16 valve heads? They seem to give quite alot more power to the redblock we all know and love

• 
  @marcinjedrol22 күн бұрын

  It’s a good addition to the motor in my opinion. Especially when you wanna go turbo, it allows the engine to breathe better

• 
  @pontushaggstrom62615 күн бұрын

  Nice for power, not as good for reliability

• 
  @ArraxisАй бұрын

  Do NOT went your PCV box to atmosphere. The Bosch LH2.4 ECU in these cars can seriously freak out when detects unaccounted for air volume. Other than that it's a great vid! 👍

• 
  @marcinjedrolАй бұрын

  Thanks for the pointer! I had it vented out since it was twin carb :)

• 
  @PommerojАй бұрын

  you should look up JB-Engine. That dude is a redblock mastermind.

• 
  @marcinjedrolАй бұрын

  Will do! Thanks!

• 
  @phongnguyen007Ай бұрын

  great video!

• 
  @marcinjedrolАй бұрын

  Thank you!

• 
  @samupkАй бұрын

  Built one for my RS13 back in the day 2005 ish. GT2871R with tubular manifold. CA18DE cams adjusted, steel rods and fully balanced bottom end. 300zx maf and 660cc injector AMW fmic etc. Made humble 408hp with 482Nm with 1.6bar and it's still alive with over 40k of occasional trashing. It really likes that you let them oils get to a temp before loading, and also very regular oil changes. Good engine, but you need to know what you are doing when building one. Not much room for bodge jobs.

• 
  @nicoledawson6342 ай бұрын

  😴 *PromoSM*

• 
  @mostwanted63792 ай бұрын

  can the ones in the fwd me converted to rwde?

• 
  @marcinjedrol2 ай бұрын

  Depends. If the bellhousing matches then ye. But fwd engines have differently located stuff

• 
  @mayikang2 ай бұрын

  Great Video! I wish to see more!!

• 
  @marcinjedrol2 ай бұрын

  Thank you so much!

• 
  @A.C.19992 ай бұрын

  6-7K euro for a 350Z? Cheapest in the whole of europe on autoscout is almost 13K

• 
  @marcinjedrol2 ай бұрын

  Absolutely. Check the marketplace. Right now after reading your comment I have found four under 7 thousand

• 
  @liam878-ny9le2 ай бұрын

  another amazing video

• 
  @marcinjedrol2 ай бұрын

  Thank youuuu

• 
  @robertfarmer63162 ай бұрын

  Keep kicking out content, I subbed and commented twice…. I truly do think the sky is the limit … much love from Detroit , MI USA (motor city )

• 
  @marcinjedrol2 ай бұрын

  Hey thank you, it's much appreciated! I used to live for a while in Chicago, so not far from Detroit! And thank you again for your support, every comment like this makes it worth continuing!

• 
  @robertfarmer63162 ай бұрын

  @@marcinjedrol nice! Keep up the good work dude!

• 
  @robertfarmer63162 ай бұрын

  Dude this channel is underrated af

• 
  @marcinjedrol2 ай бұрын

  Thanks man!!!!

• 
  @Apache90982 ай бұрын

  Great video!

• 
  @marcinjedrol2 ай бұрын

  Thanks!

• 
  @amateurdesubaru2 ай бұрын

  to let people know I have a sr20det s13 blacktop bought from a japan jdm importer in canada 15 years ago , swapped to a convertible , it was certified to have 54000km then ( installed new timing chain , water pump , seals , head gasket etc and oil pump ) , only mods are a fuel pump , 300zx brakes , header , 2.5" exhaust ( no scream pipe ) , aluminum driveshaft and mass airflow . everything else is original : coils , injectors , computer , igniter etc. it sat still (only 3000km ) for the first ten years . since I moved to the backcountry in 2021 I use this car to go to the big city every 2-3 weeks ( bought winter tires and even used it last winter a couple times ) and it is a 1500km going and coming ride in the mountains with very steep hills to climb. that engine is happy only when it revs i can go uphill in 3rd and 4th speeds at 5000rpm minimum like a rocket , for the flat section of the ride wich is on highway i hold it at 4000rpm at least in 5th speed . i change my oil every 5000km 3000miles with cheap wal-mart supertech 1/3 5w40 or 5w30 synthetic , 2/3 mineral 10w40 or 20w50 is the best mix for this engine . it even ran on 100% pure delvac mineral 15w50 diesel oil more than once since it was given to me I could not waste it but I do not recommend it : the good smell of gasoline will disappear because of that much more smelly diesel oil , I still have a bottom left in the 5 gallons jug... I mix the oils according to the season and on hand availability . I ve done 78000Km so far since installed , never experienced any glitch or flaw with that engine

• 
  @marcinjedrol2 ай бұрын

  SRs are great motors with very little weak spots, so I agree here. I also have ran 10w50 Rotella diesel oil in my rally volvo engine, it’s good for the old style tappets, so you running that in SR is understandable. I haven’t heard too many complaints about srs, so good choice mate!

• 
  @amateurdesubaru2 ай бұрын

  @@marcinjedrol I raced the canadian association of rally sports championship from 2001 to 2009 in subarus , I remember in the beginning there were still 2 old guys from ontario racing in a 240/244 squared sedan

• 
  @SiirexMedia.2 ай бұрын

  great vid, thanks man

• 
  @marcinjedrol2 ай бұрын

  Hey thank you for watching!

• 
  @simonjamet92633 ай бұрын

  Great vidéo!

• 
  @marcinjedrol3 ай бұрын

  Thank you so much!

• 
  @monikaj29823 ай бұрын

  Where is Dacia?

• 
  @marcinjedrol3 ай бұрын

  Dacia = sport?

• 
  @Mastermindyoung143 ай бұрын

  No SHS Performance 16v+t?

• 
  @marcinjedrol3 ай бұрын

  There are so many great examples that I’d need to make another vid hah. Thanks for suggestion!

• 
  @pargelooper3 ай бұрын

  algorithm pleasing comment

• 
  @marcinjedrol3 ай бұрын

  Thank you, friend!

• 
  @yevheniikochubei13853 ай бұрын

  The crankshaft disappeared.

• 
  @marcinjedrol3 ай бұрын

  The crankshaft will be prepared to do crankshafting

• 
  @BMcGuinness3 ай бұрын

  You're making these videos in perfect timing, I just got into Volvos

• 
  @marcinjedrol3 ай бұрын

  Haha thanks! What kind of volvo did you get?

• 
  @BMcGuinness3 ай бұрын

  @@marcinjedrol Picking up a 1989 Bertone tomorrow!

• 
  @marcinjedrol3 ай бұрын

  Wow that's a rare sight!@@BMcGuinness

• 
  @andreychakov91493 ай бұрын

  I have bought Volvo 740 1984 in january 2024 to rebuild it and use as a daily car. Now the car is in Rostov-on-Don have being repairing for 3 month. Nice video tho @@marcinjedrol

• 
  @DeanofMachines9 күн бұрын

  Redblock Volvos are some of the best cars ever made!!

• 
  @lucaslageraaen27083 ай бұрын

  The blue s13 was listed in norway 5 months ago somone stole it 😮😮😮😢😢 now its listed in Polen 😅😂😂

• 
  @marcinjedrol3 ай бұрын

  Bruuuuuuuuh 😂😂😂😂😂😂😂

• 
  @johnp55153 ай бұрын

  Solid stuff

• 
  @marcinjedrol3 ай бұрын

  Thanks!

• 
  @realityshower44883 ай бұрын

  solid video

• 
  @marcinjedrol3 ай бұрын

  Thanks!

• 
  @liam878-ny9le3 ай бұрын

  😎 great brooo

• 
  @marcinjedrol3 ай бұрын

  Thanksss

• 
  @pargelooper3 ай бұрын

  algorithm enhancing comment

• 
  @marcinjedrol3 ай бұрын

  Algorithm enhancing response

• 
  @patrykprosniak91723 ай бұрын

  nice crankshaft

• 
  @marcinjedrol3 ай бұрын

  Thank you <3

• 
  @willd40823 ай бұрын

  The last one isnt really a red block its a custom block one off cnc custom head i have no idea what internal are but it more based of a b230 but definitely not one

• 
  @marcinjedrol3 ай бұрын

  Isn’t it the redblock but filled with concrete? Thats how you reinforce blocks for insane powers

• 
  @willd40823 ай бұрын

  @@marcinjedrol no it's cast with no water jacket made for drag racing only it has no cooling system but very thick strong cylinder walls

• 
  @gacek56583 ай бұрын

  Bump bo dobry przekaz leci ;)

• 
  @marcinjedrol3 ай бұрын

  Dziękuję ❤️

• 
  @liam878-ny9le3 ай бұрын

  great video, but the cheese...

• 
  @marcinjedrol3 ай бұрын

  The cheeeeese

• 
  @januar693 ай бұрын

  Love your content bro, keep going!

• 
  @marcinjedrol3 ай бұрын

  Thank you so much! Will do!

• 
  @liam878-ny9le3 ай бұрын

  Stay hydrated too 😁 another great top 5

• 
  @marcinjedrol3 ай бұрын

  Thanks!

• 
  @Apache90983 ай бұрын

  Great video

• 
  @marcinjedrol3 ай бұрын

  That’s a quick comment! Thanks!

• 
  @staticwojti4 ай бұрын

  Następnym razem go pro na łeb i będzie lepszy POV :D

• 
  @marcinjedrol4 ай бұрын

  No ba

• 
  @FilipD2C4 ай бұрын

  Łututututu

• 
  @marcinjedrol4 ай бұрын

  brumbrum

• 
  @LordBurtan4 ай бұрын

  Ale tak nie kopnąć w sprzegielko 😓

• 
  @marcinjedrol4 ай бұрын

  Poprawię się następnym razę 🥕

• 
  @liam878-ny9le4 ай бұрын

  this weather... brave Nissan!!!

• 
  @marcinjedrol4 ай бұрын

  ✨

• 
  @staticwojti4 ай бұрын

  Nice video <3

• 
  @marcinjedrol4 ай бұрын

  Thanks!

• 
  @bleukreuz4 ай бұрын

  You can have the nicest engine car sound in the world, but if you are revving like a hoon in a suburbia, you are still a d---

• 
  @marcinjedrol4 ай бұрын

  I think we all know someone like this…