Пікірлер

• 
  @nicodecosta29412 күн бұрын

  Question...connecting to the terminal block instead of the regular plug in sockets...do u get more watts out of it?

• 
  @nicodecosta29412 күн бұрын

  Genuinely curious cuz i wanna buy a 5000w model to this to run an 18,000btu ac

• 
  @Crhymethink5 күн бұрын

  Awesome video I learned a lot from this! Very thorough and fun to watch!

• 
  @vanessagooby65310 күн бұрын

  Chains can help

• 
  @cherrylynn717315 күн бұрын

  My only issue is the propane tank. Doesn’t it emit toxic fumes being used indoors?

• 
  @larrycuneo885223 күн бұрын

  If this type of inverter produces voltage between the neutral and ground terminals, then it seems to me that voltage could be detected on the frame of your RV. Have you used a Fluke VoltAlert non-contact voltage testing pen (or similar product) to test if current is flowing to the frame or outside metal skin of your RV?

• 
  @smisky108626 күн бұрын

  Awesome, so easy this way

• 
  @FTRVDenny27 күн бұрын

  I know this is a couple years old but please do not disconnect ground first when working with AC power. DC power = remove ground first, AC Power = remove hot first.

• 
  @brunow6101Ай бұрын

  very elegant way, thanks

• 
  @IvyRosethebusАй бұрын

  I just watched your videos on gauge clusters. Thanks. I subscribed! Then I see you have a claw foot tub! I have a red one in my Skoolie 😃

• 
  @IvyRosethebusАй бұрын

  I’m so excited. Thank you for helping! I’ll let you know how it goes. I have 2004 International Skoolie. You gave me confidence! Thank you! 😊

• 
  @IvyRosethebusАй бұрын

  You make this look easy! You are giving me confidence to do this! I am excited. This is an informative video! Thank you!

• 
  @dirtdobber2715Ай бұрын

  Fantastic video👍👍

• 
  @alvisjenkins1305Ай бұрын

  I notice that your countertop is above the bottom window frame by about 4 inches ? What if one of the windows is severly damaged from outside, how will you remove the damaged window frame with the edge of the countertop backsplash being in the way ?

• 
  @kazbar7941Ай бұрын

  Not fair lads didn't get one, wyatt wanted that she grabbed it👎👎

• 
  @kazbar7941Ай бұрын

  Pillick

• 
  @kazbar7941Ай бұрын

  Shouldn't be on her phone driving, not good for younger one's to see

• 
  @EffieG-ez9tfАй бұрын

  If you want to add a rear deck but don’t want it sticking out as you drive down the road, why not build one that has hinges where it attaches so when you’re ready to go, just fold it up against the back door & latch it in securely in place?

• 
  @merlinmage6012Ай бұрын

  Why they allow cars like that on the road?

• 
  @jimbauer6822Ай бұрын

  This isnt sharping its tooth setting

• 
  @loneranger5349Ай бұрын

  Never seen anyone talk non-stop about nothing.

• 
  @loneranger5349Ай бұрын

  Well I thought I would watch him wire a switch. He missing something upstairs 😊

• 
  @yovanni702Ай бұрын

  Hello I'm having trouble with my rpm and mph. My rpm is not moving at all and my mph is 10 miles ahead of what the real speed any idea

• 
  @kimterrell96402 ай бұрын

  What size regular

• 
  @micamp45hc992 ай бұрын

  Good video, thanks. Just wished you gave a mention to the battery size and info for eventual replacement while you were in there. Good explanation!

• 
  @Jr-iq9hq2 ай бұрын

  I bought a new fuse box and pin connector, rewired it and it worked beautifully, a year later it did it again. Don't know what to do anymore. I'm thinking of rewiring it to an external fan relay and seeing what happens. If anyone has done that before, mentor me 🙏 please!!. Thinking it's very possible. However, don't know if it will mess anything up if I do it 😮 🤔

• 
  @Jr-iq9hq2 ай бұрын

  I have essentially done the same thing you did last year. Bought a new fuse box from the dealership, new connector and repinned wires. Worked beautifully. However, melted pins again a year later just now.I'm thinking of rewiring it to an external fan relay and seeing what happens. If anyone has done that before, mentor me 🙏 please!!. Thinking it's very possible. However, don't know if it will mess anything up if I do it 😮 🤔

• 
  @roughjeepliving53942 ай бұрын

  My cigarette lighter and outlets arent working

• 
  @gstaver12 ай бұрын

  I have the same issue. I just ordered the fuses. I’m hoping I can run my Cpap off this for at least 5 hrs. Hoping to use it while camping.

• 
  @gstaver12 ай бұрын

  Thanks!

• 
  @wayned58722 ай бұрын

  Go with inside sanding

• 
  @devonabraham74072 ай бұрын

  Great explaining

• 
  @CC88ML2 ай бұрын

  Much easier than pushing/letting off the throttle and adjusting the cable Thanks!

• 
  @SwiftKing12 ай бұрын

  Awesome video! Cant wait to join the skoolie movement. Should of bought a bus sooner

• 
  @mrs.walterwhite16732 ай бұрын

  It would cause engine fan to pull too mucn

• 
  @mrs.walterwhite16732 ай бұрын

  I know this was a couple years ago I havent seen any other f/u video. However, did you check connecter plug to your fan? There are 4 spots in plug but only 3 needed. Maybe one of them burnt?! If so, theres an extra core in the plug, has piggy tail on it. Remove bad core and replace. Im so curious as to what the problem was

• 
  @forplan12 ай бұрын

  Very useful video 👍 thank you for that.

• 
  @01mustang052 ай бұрын

  Aluminum dust is probably why this isn't commonly done. A 20 sheet paper shredder from the goodwill, would keep up with family supply of cans. And if you got a cement mixer and a torch, a bunch of the plastic can be burnt off, lessening dross in the crucible later on.

• 
  @ghibliinu66163 ай бұрын

  The 120 volt receptacle in this unit has green ground wire. Where does this ground to?

• 
  @kennethhanaburgh68773 ай бұрын

  Every one of those teeth have been heated and blued so now have no hardness left

• 
  @apb713 ай бұрын

  Thanks for the tutorial. What mill do you use?

• 
  @douglaspoor97723 ай бұрын

  Why does it only power anything while on charge and power outlet and the electric outlet and air compressor not at all

• 
  @robertvancina39343 ай бұрын

  Nice set up. Wandering did you constructed trailer - set of wheels are positioned to far behind so weight of the load is not properly distributed - most of weight is on the towing hook which is wrong and dangerous!

• 
  @matthewgeorge72473 ай бұрын

  Matthewgeorgeintelsellokpay😅😅😅😅😅😅

• 
  @matthewgeorge72473 ай бұрын

  Matthewgeorgemonthpayok😅😅😅😅😅😅😅😅😅

• 
  @cecilchristopher50923 ай бұрын

  Been using these blades for several years really happy with the life I get out of them. I did move up to the 1.5" blades on my Woodlands Mills 126

• 
  @letsdothisshelliesway16113 ай бұрын

  CHILD MOLESTER. SERVING 3 LIFE SENTENCES. A REAL POS

• 
  @WoodturnersWonders-hj2km4 ай бұрын

  Nice job but something you did scared me because I almost got killed doing it. When you pull a drill chuck out of your work piece hold onto it. If the morse taper pulls out of the tail stock and the drill is still in the piece that chuck assembly will start whipping around and get thrown at you. Don't ask me how I know. LOL Mine busted the morse taper right off the chuck when it hit the bed and threw the chuck over my shoulder and went through a cabinet door I had on the other side of my shop. Almost had to go and change my pants.

• 
  @matthewgeorge72474 ай бұрын

  Matthewgeorgepaymonthok😅😅😅😅😅😅😅😅😅😅😅

• 
  @matthewgeorge72474 ай бұрын

  Schoolbuspaymatthewgeorge😅😅😅😅😅😅😅😅😅😅😅😅

• 
  @user-ui6bo3bm8g4 ай бұрын

  😢 Remember kids always unplugged the Spark plug sometimes the machine will accidentally start if you unjamming stuck pieces it from the woods chipper.. Safety 101 OHSA training ahhhhhhhhhhh