Пікірлер

• 
  @rangerwolfhound2 күн бұрын

  pack a snorkel

• 
  @joshg845811 күн бұрын

  Does this bronco have a body lift? Or is that gap between the bumper and grill how it looks on a factory setup?

• 
  @lobooffroad11 күн бұрын

  No body lift. On our bumpers, we maintained the factory gap between the body and bumpers, as the body and frame do flex and require the space in order to not crash and damage the body.

• 
  @fields_day15 күн бұрын

  Hell yeah!!

• 
  @KennyFincher16 күн бұрын

  Thanks Chris, it was a great ride.

• 
  @lobooffroad16 күн бұрын

  Glad you enjoyed it. Thanks for joining. We plan to host runs in the future.

• 
  @AdventuresOfRogersAndHenderson17 күн бұрын

  Sick run!!!

• 
  @lobooffroad16 күн бұрын

  Thank you!

• 
  @jasoncostello347123 күн бұрын

  So much cleaner then the Rough Country version. I've already mostly destroyed the cheap skid used by Rough Country. Wish this had been out when I was shopping.

• 
  @SpartanOverlandAdventuresАй бұрын

  Great Stuff! Certainly plan to do this on my Bronco Raptor!

• 
  @B_Dub32 ай бұрын

  Any solution on how to engage/disengage the winch once installed?

• 
  @lobooffroad2 ай бұрын

  Access from the side for clutch release, or purchase the platinum winch that releases the spool by remote.

• 
  @xTinBenderX2 ай бұрын

  INSTASUB! My dream setup! This with @74Weld portals and @Suspensiondirect SDi E-CLIK shocks.

• 
  @thepavementendsnow19012 ай бұрын

  Certainly a fine looking bumper, but I am concerned about blocking air to the intercooler, for me it’s a hard no…

• 
  @lobooffroad2 ай бұрын

  Thank you for the positive comment. Its unfortunate to read that you are a "hard no" based off of a concern that is not a concern, after the thousands of test miles we have implemented and saw no change.

• 
  @Aabel19983 ай бұрын

  Will your kit work with portal axles?

• 
  @lobooffroad2 ай бұрын

  The kit uses the factory wheel bearing assembly. We have not tested, but a bolt on portal should work. As for a portal that replaces the entire upright, no. However, we are kicking around the idea of portal incorporated into the design.

• 
  @crawlifornia_bronco3 ай бұрын

  This is what I need! Let's go! 🔥 🔥

• 
  @desertadventures42213 ай бұрын

  Dude is awesome...new subscriber here

• 
  @gods_country_overland4 ай бұрын

  Interesting, like to see how this works with a Radflo setup. High potential maybe.

• 
  @lobooffroad2 ай бұрын

  With the level of shocks these days, im sure they are good. The components seem to all relatively be the same quality, it really comes down to the valving.

• 
  @This_is_My_Story4 ай бұрын

  Can you use this with the stock suspension shocks?

• 
  @lobooffroad2 ай бұрын

  unfortunately not

• 
  @AdventuresOfRogersAndHenderson4 ай бұрын

  Wow! Badass!

• 
  @benandkristiesmith55454 ай бұрын

  Can you use a ball joint delete over a standard ball joint? Thanks

• 
  @lobooffroad2 ай бұрын

  as long as all the centerlines of the joints is not moved

• 
  @mattg81164 ай бұрын

  Can you make a video showing the motion of this suspension with a failed tie rod? Perhaps you can demonstrate what design limits you have for controlling/constraining the wheel position if you did somehow get tie rod failure?

• 
  @lobooffroad2 ай бұрын

  We will be doing a handful of videos of and on the kit, in the near future

• 
  @eprohoda4 ай бұрын

  Enjoyeed! how incredible upload.

• 
  @AdventuresOfRogersAndHenderson5 ай бұрын

  Dang! Some stunning views!

• 
  @AdventuresOfRogersAndHenderson5 ай бұрын

  🤘🤘🤘

• 
  @jacobskinner31085 ай бұрын

  *promosm*

• 
  @braaap62926 ай бұрын

  One of the best looking winch bumpers on the market for the Bronco. I just have concerns about placing the winch right in front of the intercooler, there's no way that doesn't impact IATs. A high mount intercooler conversion seems pretty crucial for a bumper like this.

• 
  @lobooffroad2 ай бұрын

  10-20 years ago I would understand where you are coming from. However, with the technology these days, there has been no change in the thousands of test miles we have implemented. The shroud to the intercooler and radiator are connected and the OEM brushless fan, is more than sufficient on keeping the package cool and running at required temps.

• 
  @karrpoollane6 ай бұрын

  Can’t wait 🤘🏾🤘🏾🤘🏾

• 
  @johnhronafalvy6 ай бұрын

  Will the winch skid work with the capable bumper?

• 
  @AdventuresOfRogersAndHenderson6 ай бұрын

  🔥🔥🔥

• 
  @timsizemore30986 ай бұрын

  This bumper/skid combo is awesome! I have the Badlands winch mounted in mine and it fits tight like a glove. The bumper/skid is so durable and yet somehow light weight. Don’t get that front end sag since the winch sets back a ways. Love it guys💪🏼

• 
  @AdventuresOfRogersAndHenderson6 ай бұрын

  🔥🔥🔥

• 
  @AdventuresOfRogersAndHenderson6 ай бұрын

  🤘🤘🤘

• 
  @matyassoltes48486 ай бұрын

  Looks good💪🙌any issues with higher revs or ventilator constantly running after disconnecting the lower grill flap motor? We are currently working on 3 EU ford rangers (2023+) and ran into such issue after taking out the flaps but keeping the motor plugged. Let us know your thoughts. I will be looking forward to hear from you. Matyas

• 
  @lobooffroad2 ай бұрын

  Thank you, We have many test mile on this set up and have not seen any change in temperatures. No fans were removed, only thing removed is the louvers on the front of the intercooler.

• 
  @stephenmitchell-we8wi6 ай бұрын

  It won’t help that pile of junk😂

• 
  @AdventuresOfRogersAndHenderson6 ай бұрын

  Superb!!!

• 
  @AdventuresOfRogersAndHenderson7 ай бұрын

  Easily, the best looking winch bumper on the market!

• 
  @karrpoollane7 ай бұрын

  That’s a good looking bumper and Bronco 😎

• 
  @user-df7yl5lv2t7 ай бұрын

  Love this bumper

• 
  @eddiemunster74galindo468 ай бұрын

  This is not plug and play. Too much work and would make more sense to develop a set that works with the existing Ford hardware. That is what other developers are doing, which will help with sales.

• 
  @dnaadubose Жыл бұрын

  Looking forward to watching install videos of your front winch bumper and hidden winch skid plate for the 2.7!!

• 
  @lobooffroad Жыл бұрын

  Thank you, hope to have some our own install videos soon!!