At STO N SHO we know our customers want to see how our patented STO N SHO front license plate brackets install on their vehicles in real time and not just in a printed set of instructions. So... Mike and Steve have set out to make videos as they complete new fitments and are even trying to work backwards and get videos for some of our parts that have been around a while.
With our installation videos you also get a glimpse into the lives of Mike and Steve as they work at various dealerships around the Bay Area to complete new fitments. While these dealerships are amazing and allow Mike and Steve access to all of the vehicles on their lots, they don't get a bay in the shop to work in. You'll see Mike crawling on the ground underneath cars to get the best fit possible for your car! As a bonus, Steve likes to give out tidbits of the knowledge he has about the cars they're fitting.
Want more info? Give us a call at 408-776-4080 or text STONSHO to (833) 591-1658
Пікірлер
Do you reuse Mazda's screws or do you replace them with the supplied screws?
Hi there, we remove the Mazda factory screws and replace them with our supplied screws.
@@STONSHO thank you
So if I added a front lip would it clear for the bracket?
Unfortunately, our product is not made to work with additional front lips/spoilers.
Jack ass just make the video longer
We guessing i think rest of the video
😅
“And that’s something you’ll never see”. Oh okay
Hi, did u have any errors while driving in blue cruise control??
Hi there, I would recommend calling our shop to get installation help from our team. 408-776-4080
Carvana drilled into my 2020 charger bumper to put their bullavit plate on it
Have one love it
The car you show on this video is 2022 Mercedes GLC 300 SUV and not a Coupe. I would like to know if your model SNS328 will fit my 2022 GLC 300 SUV? Also is this model equipped with a quick disconnect so I can remove the licence plate and holder prior my car going through a car wash?
Hello, the model shown in this video is the GLC 300 Coupe. We do currently fit the 23-24 GLC 300 SUV amg and non amg model. I am unsure if there were any differences between 22-23 if it would work or not. It is equipped with a spring loaded pull-pin for fast removal.
Will it work on a 2024 Guilia?
Hi there, we have not seen the 2024 model yet to confirm if it would work or not for the 2024 Guilia.
Installation of what?🤦🏽♂️
Our product and channel STO N SHO
Please tell me where by this bracket. Holding the plate, please helping us give me link. Thank you
Hi there, here is a link please let us know if you have any other questions. stonsho.com/collections/bmw-i/products/front-license-plate-for-2021-2024-bmw-i4-non-m-sport-with-drivers-assist-sns370a
And how bad does this rattle when driving down the road?
Hi there, our STO N SHO is very secure and does not rattle when driving.
Where I can find that I bought a 2024 mustang and I don’t want to drill my
Here is a link to our SNS279. Please let me know if you have any questions stonsho.com/products/front-license-plate-for-2021-2024-ford-mach-e-except-gt-sns279?_pos=1&_sid=e75cc02f0&_ss=r
This went easily for me.
We're glad your STO N SHO install was a breeze! ☺
I assume this will fit a 2023 Golf R? My parking sensors are in the same place. Also, when using the accompanied hardware, ie: screw, nylon lock nut, will those screw heads work with license plate caps? Is it totally necessary to use all 4 screws, or can I just use the top 2? My rear plate only uses top 2, I’d like it to match, no biggie if I’m recommended to use all 4 screws. Thanks
Hi there, unfortunately we only currently fit the 2024 Golf R. If you're local to our area we can try to make a new fitment for you at our shop in Morgan Hill, CA. It is recommended to use all 4 license plate screws with your STO N SHO
@@STONSHOhmm, I called and talked with a nice woman at your shop, and I sent her a picture of the front end of my car, she assured me it’d fit and I think she is right. I already ordered the bracket and it’s set to be delivered today. Hopefully it’ll fit?
I need some tips on the front bumper
Hi there, how can we help you?
@@STONSHO i figured it out got it off .... these covers are not for R and I to get ready for repair and paint all the parts are plastic welded
Just what I needed. BTW for anyone considering this solution - the folks at STO N SHO give outstanding service.
Hi there, we are glad you love your STO N SHO and had a great experience with our team! 😁
Do you know where is the Rear Light fuse or Relay? My Lights not staying On when driving!
Hi there, unfortunately we are not familiar with the mechanics of the car itself.
Will this work for the 540i 2024?
Hi there, unfortunately we do not currently fit that model. It is on our list to look at and we hope to have a fitment for it soon.
Does this fit on Ecoboost premium 2024
Hi there, it would depend on the packages the car has. I would recommend calling our shop to get the correct part number at 408-776-4080
Brilliant
Do you have any videos for the 850i with ACC? Does the plate have to go to the side for those as well?
Hello, unfortunately we do not currently fit the 850i with ACC. We do currently have a fitment for 2019-2023 m850i without ACC. stonsho.com/products/front-license-plate-for-2019-2020-bmw-m850i-840i-m-sport-upper-mount-sns231
I have a base model 2022 GT, it has an aftermarket splitter and the sto n sho won’t reach due to the splitter, any alternatives so I can have the sto without removing the double front splitter ? Thank u!
Hi there, unfortunately our product does not work with aftermarket splitters. If you are interested we do offer custom fitments upon request, please fill out a contact request on our website.
Your placing the license plate in front off the radar, so you are basically removing acc from the car with this modification
Hi there, our bracket has been tested and does not interfere with the radar sensors. As long as the correct part for the vehicle is used, adaptive cruise control will not be effected.
I only changed out the Grill for the ZO 6 Type. and transfer the Cameras to the new ZO6 Grill. Looks Sharp!
My Stingray came with front Parking Camera. Nice!
72k for a Jeep. Never thought I’d see that in my lifetime
the plate holder looks at very low position. Is the height adjustable?
Hi there, no it is not height adjustable. The STO N SHO lowers ground clearance by only around 1/4-1/2 of an inch.
Wait a minute. How about the old license plate mount. How was that take down and what did you do for the holes?
Hi there, old license plates can easily be taken off similarly to how the bracket was installed. For holes we recommend Bumper Plugs which will be vehicle specific and match the color of your car to blend in seamlessly bumperplugs.com/welcome?gad_source=1&gclid=Cj0KCQiAy9msBhD0ARIsANbk0A_Ok1vFbM4gUZeFwUuKrT7JgrE9CsY8Fatc_YUZgHWsgcLfdcwKHOMaAiLGEALw_wcB
@STONSHO Parking sensors keep going off on my Stelvio, is this normal?
@@moparmafia2352 Hi there, no this is not normal. If installed correctly and on the correct model sensors should not be affected. I would recommend giving us a call at 408-776-4080
That's not a spoiler, that's the splitter... the spoiler is on the trunk...
have one for 2023-24 x3 m40i?
Hi there, yes we do! We fit both with adaptive cruise and without. Here is a link to with adaptive cruise control stonsho.com/products/front-license-plate-for-2018-2022-bmw-x3-x4-m40i-and-30i-m-sport-with-adaptive-cruise-control-sns149b and without stonsho.com/products/front-license-plate-for-2018-2022-bmw-x3-x4-m40i-and-30i-m-sport-without-adaptive-cruise-control-sns149a
Hi there, i am assuming these won't have any issues interfering with the sensors in the bumper?
Hi there, our products are vehicle specific and do not set off any cruise control or parking sensors when installed correctly. This specific application is not made for the model with adaptive cruise control.
Cool!
?
I have a 2019 GLC 300 and I have moved to MA from GA and need to get a front plate on my car. This helped A LOT!
What they need to do is eliminate the front license plate rule/law here in California, just like they did in Ohio a couple years ago. Think of all the reduced insurance claims from small, low speed love tap bumps on cars that results in puncture damage to the bumped car’s front fascia.
Hi there, front license plates are beneficial for many safety reasons. It does change the look of your car. Which is why we created STO N SHO to help cars be legal on streets, but be able to remove their front plate for car shows or pictures.
Had STO N SHO on two Corvettes. Superb quality. Ultra nice; as shown, use just one finger pull and they are removed for a car show. Will get one for my iX. One suggestion is to after the test fit, slightly bend in the four corners of the X (just onto a carpet or towel in your garage, to make the install more conforming to your front splitter’s curve, e.g., more aero too lol) - and it looks better curved. Your plate will conform to the curve you created. No tools necessary for that bending; just go slowly, and progressively with slight force at the beginning, more if/as needed.
Most helpful! Thank you.
Glad it was helpful!
Hey! Is there any way i could contact you directy?
You can reach us on instagram or facebook 24/7 and our phone number is 408-776-4080
Radar is over-rated. Have to remove this plate every time you drive. If not your car will be going crazy beeping ,flashing becuse radar isnt available
This specific car does not have any sensors in the front, we make different options for cars that have 401A assist or sensors.
But it blocks the radar sensor thing...
This specific car does not have any sensors in the front, we make different options for cars that have 401A assist or sensors.
@@STONSHO gotcha.
Junk!
Had this system on my 2016 C7 Corvette, then transferred it over to my 2020 C8 and now will be getting it for our daily driver. Outstanding quality and so super easy to put on or take off as wished. GREAT product!
Wondering the same as @odugs. Does this work on the EQE SUV?
We do make a bracket for the 2023 EQE 350 or 500 SUV
This looks like a great solution but I’m wondering what is keeping it from rattling?
Mine has not rattled on my last two cars. The slide pins fit into their barrels with precision - yet come off and go back easily with light finger pressure.
I’ve got one on my GT. I will put one on my 24 when it’s available.
How do you call this a Mustang? It looks like an SUV.
Can't argue that! Ford calls it a Mustang, so we do... but your point is valid!
Hello, would this work on an EQE SUV also please?
@@STONSHO it’s okay. You actually are a great company. You answered my question by phone and I got the right part. 1000 miles later and it’s worked great. Thank you.