Пікірлер

• 
  @beautifulsleet732217 сағат бұрын

  😂😂😂

• 
  @westernlsmotors34542 күн бұрын

  Hey, I didn't know anyone took a video of the event last year, but that's my truck at the beginning of the video, Single cab Twin turbo F150.

• 
  @beautifulsleet73222 күн бұрын

  Good Job babe❤

• 
  @JohnWaeyen3 күн бұрын

  So how did the 200 PSI sensor work with the Holley Terminator?

• 
  @beautifulsleet73224 күн бұрын

  💜💜💜 Great video my love

• 
  @beautifulsleet73226 күн бұрын

  ❤❤❤

• 
  @beautifulsleet73226 күн бұрын

  Thanks!

• 
  @beautifulsleet73226 күн бұрын

  ❤❤❤❤

• 
  @beautifulsleet73226 күн бұрын

  ❤❤love this

• 
  @beautifulsleet73226 күн бұрын

  Thanks!

• 
  @beautifulsleet73228 күн бұрын

  Love you babe ❤

• 
  @roosty68 күн бұрын

  That Co-op tractor looks like the one my dad took a picture of back in the 1990s. Looks like a number 2 or 3 Co-op dating to the late 1930s.

• 
  @beautifulsleet73228 күн бұрын

  Thanks!

• 
  @beautifulsleet73229 күн бұрын

  Love this hunny ❤

• 
  @TahoesNTurbos9 күн бұрын

  Thank you so much for all your support sweetie ❤

• 
  @beautifulsleet73229 күн бұрын

  Thanks!

• 
  @Nova.197113 күн бұрын

  Nice little show and museum...thanks for sharing......

• 
  @roosty613 күн бұрын

  Pretty good show for a small town.

• 
  @TahoesNTurbos13 күн бұрын

  It was nice to see what the car scene south of Regina is like and I cant wait for next year. Next one in that area is Vibank once I finds out when it is. Thanks for watching and I hope your enjoying this nice weather finally.

• 
  @Nova.197116 күн бұрын

  Nice add to the shop, Put up a 60" six speed fan in my shop and it makes a difference summer and winter......Well done.

• 
  @roosty618 күн бұрын

  It turned out well. Have not seen the museum in a few years. Saw myself at 4:42 admiring that 53 Merc.

• 
  @Nova.197118 күн бұрын

  Another nice show and museum.....thanks for sharing.....

• 
  @Nova.197118 күн бұрын

  Those 6 volt systems have a laggy starter it sounds about right to me.......Thanks for sharing.

• 
  @mikee239818 күн бұрын

  Gotta be Canadian! Haha

• 
  @roosty619 күн бұрын

  Slight correction, my 52 is a Mercury, not a Meteor. A Meteor is basically a Ford but a Merc is closer related to the Lincoln. Your starter sounds pretty much normal for a six volt system. It does sound like at least one cylinder has a valve stuck open. I bet if you poured a little gas down the carb and cranked it with 12 volts it would start. Have you checked the points in the distributor and cleaned them up and tested for spark?

• 
  @madcowmark712920 күн бұрын

  Cheers mate, one for the algorithms.

• 
  @roosty623 күн бұрын

  You did a better job videoing the cars than I did. We stayed right to the end of the show to see who won people's choice and the door prizes.

• 
  @Nova.197123 күн бұрын

  Nice little show...thanks for sharing....

• 
  @roosty625 күн бұрын

  Tough to get a break between rain showers but you did it. Been through Lanigan once on the way to Combine World at Allan.

• 
  @Nova.197125 күн бұрын

  Nice small show and a very cool museum....Thanks for sharing.....

• 
  @kathondonaldson907327 күн бұрын

  Question for you!

• 
  @Nova.197127 күн бұрын

  Seems to do a nice job but the cost of the media may be pretty expensive.Well done and thanks for sharing.

• 
  @roosty628 күн бұрын

  They work well but do use a lot of sand. I got one from Princess Auto that uses a suction line. The sand is free from the gravel pit on the farm. I have to run the sand through a screen first to take out any bigger particles that will plug the nozzle but it does a good job on old paint or rust.

• 
  @TahoesNTurbos28 күн бұрын

  that's a great idea! our pit has been just sitting in the pasture, I'm gunna have to check it out next time to see if I can use it. I was thinking of getting one with a suction line because of it using a bottle in less than a minute 🤣😂

• 
  @Nova.1971Ай бұрын

  Good fix on the door........

• 
  @eastl.a.7979Ай бұрын

  Man this really helped I thought I was out of more money again after my mishap with fitech

• 
  @roosty6Ай бұрын

  Thanks for the show. Too bad the weather was so miserable. I shot video of the show back in 1989 on vhs on a hot sunny day. Real car show weather. Hope the weather is nicer for the next show.

• 
  @TahoesNTurbosАй бұрын

  Thanks, im hoping the weather is better this weekend for Dog River and Cupar haha

• 
  @Nova.1971Ай бұрын

  The weather has sucked this year our show was cancelled due to weather......a small but nice turnout Thanks for sharing.

• 
  @TahoesNTurbosАй бұрын

  Thanks, I was actually planning on checking out the Wakamow Valley show but was cancelled, but do plan on being at Sukanen on July 21st so hopefully the weather is perfect for that.

• 
  @Nova.1971Ай бұрын

  That will be a nice little project !!!!!

• 
  @Rattlesnakeofficial1Ай бұрын

  will pulg in with the factory harness with the holley 12.3 on my obs

• 
  @Nova.1971Ай бұрын

  Good job....... Glad you phoned a friend as you have two 115 wires the black and the red with the white going to the neutral bar and green to ground. Your wall plug was wired right. Look forward to the projects you will be doing and the car show....

• 
  @TahoesNTurbosАй бұрын

  Thank you, I was so nervous as Im not an electrician at all 😂 just glad it worked as I got some cool stuff planned

• 
  @dimitridornАй бұрын

  You keep factory pcm?

• 
  @Nova.1971Ай бұрын

  I hear ya it can be hard sometimes but keep your head up and push on.....I like to watch your content.... I'm not a LS guy old school but enjoy watching..... Thanks for sharing Mike

• 
  @ICTBilletLLCАй бұрын

  Loving the decor in this shop! 🔥🔥

• 
  @TahoesNTurbosАй бұрын

  Thank you! nothing but the best!!

• 
  @antwoinescars266Ай бұрын

  Did you use the factory 4l60e big connector on the trans or the ls harness connector to the transmission?

• 
  @TahoesNTurbosАй бұрын

  I didn't use any of the factory wiring, I used the Holley Terminator X Max that came with the trans harness. when using a regular LS swap harness it comes with the trans plugs as the computer needs to know what's going on. thank you so much for watching!

• 
  @daryls6621Ай бұрын

  is this still standing with the 80k wind gusts we just had?

• 
  @TahoesNTurbosАй бұрын

  yes it is, to say I was worried was an understatement but came up with some mods to help it. will have a video on that this coming week

• 
  @daryls6621Ай бұрын

  @@TahoesNTurbos good to hear.

• 
  @Nova.1971Ай бұрын

  Good job. Yes these get very humid and hot inside, In the spring if you don't plastic the floor fully it will actually rain inside. It needs to be anchored at every leg to limit the movement in high winds. The biggest fear is hail and wind which can put hundreds of holes in the cover. Just a few tips as I had two of them before I put up my shop but were protected by trees.

• 
  @TahoesNTurbosАй бұрын

  Thanks for the info, I have been modifying it actually to combat those issues. the reason I bought it was to protect my tahoe from hail until my shop is built. my yards fairly protected but this shop is taller than my trees currently

• 
  @Nova.1971Ай бұрын

  Big show lots out to enjoy the day......Thanks for sharing......

• 
  @TahoesNTurbosАй бұрын

  Thank you for watching

• 
  @roosty6Ай бұрын

  Great day for a show. I saw a few familiar cars and faces there.

• 
  @TahoesNTurbosАй бұрын

  It really was haha I noticed people after the fact when editing, gunna have to pay more attention hahaha

• 
  @Nova.1971Ай бұрын

  Well done I like the Museum tour also.......

• 
  @TahoesNTurbosАй бұрын

  Glad you enjoyed it

• 
  @probsty13Ай бұрын

  right on buddy. looks fantastic. took a bit for my day to open up so we could give a hand, but we made it happen. took till damn near 2300 but she was up. also holy fuck beer looks tiny in my hands

• 
  @Nova.1971Ай бұрын

  Good job. I had two of them in the yard (you can see on my channel) before I built my shop. It's good you are putting a sealed floor down as you will find in the summer it is like a sauna in there. You will need to fully open the door and let it air out before you work in it so the heat gets out a bit. The biggest think you notice is the humidity for sure. Thanks for sharing.