The Danny the Do-It-Yourself video collection. This is a compilation of home videos that I have taken of product reviews, Do-It-Yourself projects, trips and adventures I have taken, and the wacky stuff that I find myself doing. Hope these videos help you in some way and make you laugh/smile.
Пікірлер
Thanks Soo much ❤
Thank you!
Thank you. Between your excellent instructions paired with knowledgeable comments i now have a plan. If i only where Pinky went......😅
Thank you so much😢
glad it helped. have a great week.
Same bag zip stucked today trying to fix it
hope you got it opened.
Calling it jamsport now
Thank you!! Worked beautifully! I was afraid I was going to have to replace zipper
Glad the technique worked for you. Thanks for commenting.
Way too easy
Great resource, no information regarding this specific model anywhere when you even use the product number. Unfortunately, even after clearing all the gunk around the shredder and filter, the water that fills the tester cup in a wash still looks dirty.
Just got the error tonight, Did some searching and found this guy, He's a genius, It worked. I'm very relieved. Figured this would got me a few hundred bucks. Thanks Danny.
I dropped one ear bud in dish water. I took a hair dryer to it on warm setting. It works now... I dropped my cell phone in water too before and i used a hair dryer on it. I just made sure i turned the phone off right away before taking the hair dryer it to it. It fixed my phone...
Can u please show us your weaving process?! Thanks, a great hack!! 🎉
Just start in on direction length-wiseand secure the ties. The cross over width-wise with the rest of the ties. There is no weaving necessary.
Thank you SO much! My drawer was so stuck and I had tried putting flat objects in to try to unjar it, shaking violently.. nothing was working. I didn’t even expect to find anything on the internet when I googled this. It worked in less than 3 minutes !!! So grateful !
Glad it worked for you! Thanks for commenting. Have a great rest of the week!
Have been trying for 3 days, no success, metal hanger, plastic hanger, spatula, any other suggestions would be appreciated.
Don't give it up, it will eventually get open. Maybe get someone else to try it. Keep at it.
This video was super helpful ! Does anyone know why this happened in the first place?
I was hoping you’d show how you removed the old one. Mine is like yours but it does have these mental inserts in the middle of the cover.
I'm not sure what you mean or your question.
Why am I the only one who’s having issues. I can’t swipe down while on Netflix it don’t have those settings appearing when swiping down
Thank you!
Thanks for the vid Funny that your tap is all loose though, 2:00 with all your knowledge why don't you fix it?
You are correct and that faucet was fixed right after :-) This was my daughter’s house so yes, she had a lot of other things needed to be fixed :-)
i appreciate your video .But as a plumber why is your plumbing so bad ..lolo your tap is loose . also note that , some mixing valves are not serviceable and must be replaced . I clicked on link to see if perhaps you had a hack to soak in CLR or something to remove scale . Thanks danny now get under that sink and secure that tap . haha .
You are correct and that faucet was fixed right after :-) This was my daughter’s house so yes, she had a lot of other things needed to be fixed :-)
Bought 1 today when my AC UNIT went out this morning
Is it any good? Im thinking of buying it tomorrow but im concerned it is overhyped
Just bought it on prime day for 90 bucks, for this price it's absolutely amazing and comes close to Dyson's Tower Fans@@DuskoDugousko84
Get it on prime day Amazon. Worth it and love it!
DUDE! FIXED!! Exact same problem, soldered it up, MINT! This thing won’t die and I friggen love it! 😂 I am just gonna buy whatever Danny buys so I can keep em going! Haha CHEERS man!
Glad it worked for you! Yes, these machines are great and can last for many years still. The next one for me that started wearing down are the rollers and belt that rotate the drum. If your machine starts to squeak, it will be time to replace them. There are lots of videos on KZread you can find for the repair as well. Anyway, have a great rest of the week and thanks for commenting!
This is a great video! By chance, what type of tool do you use to unscrew that mixing valve cap?! None of my screwdrivers fit! Once I get that off, hot water here we come! Thanks again!
Mine was a x head screwdriver (Philips). You might have to get a set of them from the hardware store and if you don't already have one, you might need a Plier Wrench to turn the valve. This is a great wrench to have in your DIY tool box.
Can you help me
I’m streaming through Apple I need to turn off the person telling us what is going on
You have to go into the main apple TV settings on the home page. Then From the main page in AppleTV go to: Settings --> General -> Accessibility --> Audio Description --> Set to off This should make sure it keeps this setting off for all the rest of the videos.
This is so helpful, can’t believe I found this! I’m not handy, but got to the control board and see that fried part. Was able to remove all wires/plastic thingies except that beige one on the lower left corner of the board I’ve pushed, pulled, squeezed, pried, and it won’t budge. Before I apply more force want to make sure it’s going in the right direction My beige thing looks slightly different than yours… wish I could post a pic here… but wondering if any of your readers encountered the same feisty piece and how they removed it! It’s connected to the board and an orange plastic thingie right above it. It has slots, a notch and a wing-like piece so I’m sure there’s some logical way to remove it but I don’t want to break it! Any advice appreciated!
You really just have to squeeze the clip with your thumb and index finger and keep wiggling it off. Maybe get someone with stronger fingers as it can be on pretty tight. Hope you get it off eventually.
Watched many videos on building all kinds of Pergolas. And yours is very much like what I've been looking for and what we want to build. Thanks
that’s great! thank you for commenting. let me know if you have any questions and I would be happy to help you through the build.
Attached the joists I just used 2 carriage bolts through the posts and beams. As for the joists (6x2x16) attached to the beams....i just simply used deck screw on a 45 degree angle and screwed in the joists where it sits on the beams on either end. This is good enough to keep it standing and secure. Hope that makes sense.
dimension and coverage: Inside space was about 12x12 between the poles. The roof was 16x16 coverage. The beams stick out and carriage bolted to the post at 2 feet on either side.
as for how it’s held up over the years….My pergola has held up great! After several summers, it still looks good as new. My area also gets high winds because we live close to the lake. Plus heavy snow falls. I don’t see any movement in my patio stones as well since the pergola isn’t that heavy with just one layer of joists. I’m even near the lake so the ground is mainly sand and the patio interlocking stones have not moved at all.
That's not counterclockwise...
OMG'osh! Thank you so very much!!! I had a plumber in yesterday that told me it was a $400.00 fix! I was even going to buy parts and try to fix it myself. After seeing your video, and following your simple instructions, I have my hot water back!!!! Thank you Danny!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks for the tips Danny. It works great! They really hate that pepper! I'm so happy! Thanks again 👍
I had a suet cake with cayenne, a very large bear came, took a few nibbles and walked away without bothering the feeder. Captured it on the game cam.
I found a thin plastic washer that apparently goes either on top of or on bottom of the center piece. Not sure where it goes, but I guess trial and error is all I have left if I want to complete the job today. Other than the washer, it was an excellent video. Thanks.
it goes on the bottom of the center knob. make sure you put that back on.
Thanks man, it helped me today 😊
glad it helped! thanks for commenting.
Anyone else have trouble putting the spray arm back on? The screw won’t catch for me and I can’t get it back on
you might have stripped the middle knob. try pushing the know down and then screwing in the arm. you can also try pulling the knob up so it’s freely spinning, then put the arm on, get a plier to hold the knob, then spin the arm to screw it back on while holding the know tightly upwards.
Got it out, thank you
glad it worked. thanks for commenting!
Great video. That is what I need to do. But it is hard to take out the cover at the bottom , I don’t want to break the plastic cover( grey color piece) . Can you give more instructions how to get the big grey color plastic cover off t? Thanks
you can try using a butter knife or flat-head screw driver to carefully pry it off. start at one end, then work you way across. it should pop off without breaking it.
Good job😊
thank you!
Well the board in my dryer had the same defect - resoldered and tested ok - Relay tested ok - but I wonder if it is a manufacturing problem with a bad batch of boards and a cold joint that over time fails - something to watch for
Thank you so much, Protip for opening is to cut that clothes hanger like on a video but bend it in half to make it stronger and make it unbendable, if that doesn't work then bend it at the end and make it into a hook. And most importantly dont give up
I love the additional tip! And most importantly, be patient, it can take a second or 20 minutes…. but it will eventually get opened.
Are the new kitchen aide dishwashers this much ridiculous amount of trouble? No thanks! Way too much work!!!
ya, the new models are so easy to maintain.
Pops it oot. Learn how to say out properly.
I wish i didn’t have this stupid kind of dishwasher with all these steps to do to clean a dang filter. Not at all convenient!
I agree!
Too much work. Not convenient at all .
Ridiculous amount of work to clean a filter!
Anyone know how he attached the horizontal 2x4s to the 6x6 on that fence on the closed side of the pergola?
I started with a 2x6 bottom base, then a 2x4 standing centered on that base in a T-Shape (leaving 2” on either side), then using a piece of 2x4 to space out 8 rows up to make the wall. Then capping of another 2x6 at the top. I simply used deck screws on an angle to screw in these pieces to the 6x6 post. To finish, frame and stabilize the whole wall, I used 4 2x4 to make a column on either side of the wall. I used 5” deck screws to attached the column piece to the wall. The column piece also prevent the wall from warping over time.
@@DDIY-Guy thank you sir!!! I love the look and have been racking my brain trying to figure out how you tied that in there. That bottom 2x6 did you just toe nail it in to the 6x6
@patrickpiazza5482 Yes, I toe nailed/screwed deck screws so I can easily make adjustments later.
Extremely clear and helpful content. You saved my dishwasher. I followed your instructions exactly and am thrilled to say the dishwasher is working! Thank you!!
That’s fantastic! i’m glad the video helped you fix you problem. thanks for commenting. have a great rest of the week!
Thank you!
Glad the video helped. thanks for commenting. have a great rest of the week!
Thanks for this easy tip. Went from 94oF before to 115oF after! Happy wife and teenagers!!!
that’s fantastic! glad it worked for you. thanks for commenting. have a great rest of the week!
Damn I don’t have any wire hangers
Hey Danny, as a plumber do you recommend having the faucet loose on the sink as shown. Must be some advantage there?
Good catch. This was my daughter’s place so I fixed that as well after making the video :-)…. and no, I’m not a plumber, just a dad that wants to save some repair cost for his daughter ;-)
Awesome idea, thanks for the inspiration! Sitting under our covered patio in a summer rain storm annoyed with the lack of gutters as I type this lol.