Пікірлер

• 
  @bigles454511 сағат бұрын

  What about one for an mr triton and do a vid since there is a lot of us triton drivers out there

• 
  @aussie_jonesy_273116 сағат бұрын

  I want that for my nav

• 
  @alex.caddell6 күн бұрын

  filterationz

• 
  @Peanutbrain827 күн бұрын

  Just ordered a set for mine, is the first section a highflow cat?then into a resonator? No engine lights ?your work looks great! And would you say there is alot more turbo whistle with these bad boys?

• 
  @PiazzaWoodWorks10 күн бұрын

  Sirricum

• 
  @OurAdventuresDownunda11 күн бұрын

  What a crack up! ❤❤

• 
  @D34THaturplace11 күн бұрын

  Epic install can I get different decal in the tip like just a cross ❌ so my engine doesn't suck any Wild life in

• 
  @Juzz_Vibes21 күн бұрын

  I’ve heard people are losing power changing the exhaust. Do you have any dyno results to show this isn’t the case with this?

• 
  @meredithmetalworks19 күн бұрын

  Hey mate, we will do a final video going in depth of the dyno results abit more. A quick breakdown of what we have found is that the exhaust doesn't make a different with horse power gains, it makes the car come on boost 4 seconds faster and holds its temps a lot better. so although there isn't direct gains there is gains in long jevity performances.

• 
  @Boschy23 күн бұрын

  Have you got any before and after videos? Would be keen but not sure how much it will silence my patrol 😂

• 
  @meredithmetalworks19 күн бұрын

  We do on our here there is another video on our next gen ranger. it drops roughly 10 decibels. We haven't done a before and after on a patrol though sorry.

• 
  @herpderp1662Ай бұрын

  Hell yeah, sign me up. Always wanted to pay money to get a 40hp loss.

• 
  @meredithmetalworks27 күн бұрын

  The stock one lost power over the runs not the modified.

• 
  @jacobstojanovski7275Ай бұрын

  How do I get my px1 ranger to sound like that

• 
  @meredithmetalworks19 күн бұрын

  Snorkel and airbox :)

• 
  @muhammadsherallyАй бұрын

  Ranger raptor was about to be the perfect pick up, just the exhaust... sounds like a sand buggy

• 
  @meredithmetalworks19 күн бұрын

  This has definitely been one of the hardest cars to make sound nice without blasting your ears off.

• 
  @forgottenknowledge8917Ай бұрын

  The main reason I want a snorkel. Lol. Not for clean air or water crossings or anything.

• 
  @meredithmetalworksАй бұрын

  Absolutely, you should do it!!!

• 
  @jaradtaylor2023Ай бұрын

  New bullbars?

• 
  @meredithmetalworksАй бұрын

  Hmmmm maybe

• 
  @benfults1120Ай бұрын

  Need welders?

• 
  @meredithmetalworksАй бұрын

  Always, you can email us through your CSV and we can have a look :)

• 
  @VR4pt0rАй бұрын

  Maaaate, that sounds great! I’m not sure if I got it right tho, do we keep all the exhaust modes (Quiet, Normal Sport & Baja) or just Baja which you’ve mentioned in the video. Cheers mate. AL

• 
  @meredithmetalworksАй бұрын

  Thanks mate. You are correct they are all still functional with this set up :)

• 
  @joesiki3780Ай бұрын

  What's the offset on those methods?

• 
  @meredithmetalworksАй бұрын

  I think it's +15 x 9

• 
  @heavyduty1776Ай бұрын

  lol ruined a nice truck. Looks like a clown car. Good grief, you do this for a living?

• 
  @meredithmetalworksАй бұрын

  sure do buddy and love every day of it 😀

• 
  @japhilp211Ай бұрын

  The sliders look killer, are they something you will be making available to purchase ?

• 
  @meredithmetalworksАй бұрын

  Yeah sure will we are working on prices and paper work now for them :)

• 
  @RichieGarageАй бұрын

  Awesome build, that exhaust is clean! what canopy is that?

• 
  @meredithmetalworksАй бұрын

  I believe it's a Camp King Industries canopy

• 
  @-zerocool-Ай бұрын

  Thats easily the nicest build ive seen yet on the Raptors!

• 
  @meredithmetalworksАй бұрын

  Thank you so much. We love it 🔥

• 
  @meredithmetalworksАй бұрын

  😍

• 
  @AussieDadzАй бұрын

  Mate love the content....I was itching to see the results and then it stopped with a to be continued. I was yelling at the tv lol. Cheers for the good content mate. You've got me wanting to drive over from wa to get mine done

• 
  @meredithmetalworksАй бұрын

  Hhahahah. Sorry... Check out the next video posted on Sunday we run through it more.

• 
  @user-oo7ck6zs3jАй бұрын

  ?

• 
  @meredithmetalworksАй бұрын

  😅

• 
  @user-pu9fh7uz6nАй бұрын

  What made you go the box aluminium canopy

• 
  @meredithmetalworksАй бұрын

  Hey mate, it's not our car unfortunately. But ally is lighter weight so I'm assuming that would be why.

• 
  @-zerocool-Ай бұрын

  Because its clean AF

• 
  @curtis4925Ай бұрын

  Mine makes 315kw at the tyres

• 
  @meredithmetalworksАй бұрын

  Yeah they all make basically the same sort of power from factory. It’s more of a how quick does it get there kind of deal

• 
  @-zerocool-Ай бұрын

  Thats the only style of canopy that should be on these trucks, looks awesome!!

• 
  @meredithmetalworksАй бұрын

  Look cool hey. Absolutely love this thing

• 
  @behindthebuild8016Ай бұрын

  Yea looks cool but you can see sht out the back

• 
  @Wintersgarage_Ай бұрын

  Shouldn’t be running out of turbo at 360hp, people are making 360kw at the hubs on 98 still

• 
  @meredithmetalworksАй бұрын

  Sorry they are both factory cars. No added fuel boost or anything, just seeing what gains we made

• 
  @therandoms8102Ай бұрын

  You kept all that soot in the shed, so no harm to the environment

• 
  @meredithmetalworksАй бұрын

  #safe

• 
  @watevz2212 ай бұрын

  May aswell seal it. Once the guard is on, you won't Know it that rubber Valve it there or not. It'll fall Off eventually.

• 
  @meredithmetalworksАй бұрын

  If you seal it then the water can't get out which is counterintuitive.

• 
  @alex.caddell2 ай бұрын

  An awesome addition to the short entry 4" on the LC300. Thanks Casey and team for the special sauce and innovation to bring this to market. Still get a good staino note at higher revs, but much more quiet while the first stage smaller turbo is in motion up to about 2300rpm cruising around town or crawling on the tracks.

• 
  @meredithmetalworksАй бұрын

  Thank you so much for the kind words.

• 
  @womblingaround2 ай бұрын

  have a custom snorkel i picked up from a mate, how do i go about making a template or freehanding the hole in the guard?

• 
  @meredithmetalworksАй бұрын

  What brand snorkel is it? If it is ours and you can give us a call and we can send one through :)

• 
  @womblingaroundАй бұрын

  @meredithmetalworks unbranded pretty sure, basically just alloy pipe that's been mig welded. Was meant to fit a 92 hilux but didn't come with a guard. Was just wondering if I can use some math wizardy to cut a perfect hole or if I have to just holesaw the guard and then die grind the edge till it fits?

• 
  @herpderp16622 ай бұрын

  No

• 
  @meredithmetalworksАй бұрын

  Okay thanks :)

• 
  @1129DSJ2 ай бұрын

  A rigged up 80 could run it backwards, 300 Soccer Mom Series special 😂

• 
  @meredithmetalworksАй бұрын

  Give it a crack I recon.

• 
  @rodneyflying91242 ай бұрын

  lost all ram air effect

• 
  @meredithmetalworksАй бұрын

  Lucky it's got a turbo to suck the air in.

• 
  @PiazzaWoodWorks2 ай бұрын

  😂😂😂😂

• 
  @meredithmetalworksАй бұрын

  ❤️

• 
  @raptorrungreece2 ай бұрын

  What is your tire size? And do you have a lift?

• 
  @meredithmetalworksАй бұрын

  Unfortunately this isn't our car, it's a customers so unsure what wheels and lift he has on it sorry.

• 
  @tyzon008002 ай бұрын

  Just needs to be red then it would pass for the wiggles car

• 
  @meredithmetalworksАй бұрын

  Red goes faster too :)

• 
  @waynehaughton30072 ай бұрын

  Good day. @meredithmetalworks What would be the cost of exhaust with the high flow down pipes, the resonator delete and the 4” exhaust tips? I assume this to be the exact set up in this video, if not, could you direct me to the options on your website where I could order all components?

• 
  @meredithmetalworksАй бұрын

  Hey Wayne, shoot us a message on facebook, instagram or email and we will price it up for you

• 
  @brunoonraedt34012 ай бұрын

  A camel

• 
  @nwayeralnaber51232 ай бұрын

  A car

• 
  @jason_mate2 ай бұрын

  always be gentle with the tip folks

• 
  @meredithmetalworksАй бұрын

  hahaha always!

• 
  @angelmontenegro3132 ай бұрын

  😂😂😂I can’t tell 🤣🤣

• 
  @angelmontenegro3132 ай бұрын

  Funny video tho! Love it

• 
  @meredithmetalworksАй бұрын

  She is definitely the steel cap wearer. haha

• 
  @XxCosmicWarriorxX2 ай бұрын

  🤣🤣

• 
  @ItsTrueMarketing2 ай бұрын

  Theres literally no difference a snorkel is a snorkel as long as installed properly it works and if ya do need one ya dont.. yall weird af with this habi jabi nonsensical 😅

• 
  @JamesAsmar-pq9du2 ай бұрын

  I’ve put a snorkel on my raptor and it doesn’t even flutter like that with a twin airbox. What do I gotta do to make it flutter like that ? Lol

• 
  @meredithmetalworksАй бұрын

  There is tricks to getting it to flutter. Upgrading the airbox will emphasis the turbo sounds as well.

• 
  @user-kt2kb7wj4l2 ай бұрын

  I prefer plastic over metal

• 
  @meredithmetalworksАй бұрын

  I prefer meat over veganism 😂

• 
  @AlexandStuff2 ай бұрын

  This sounds awesome, very interested. However, on your website it states fitment is for "3.0L V6 Turbo Diesel". In the US we dont have a 3.0L V6 TD, only regular gas V6 turbo. Same fitment?

• 
  @meredithmetalworks2 ай бұрын

  We have a diesel one too this one’s on the website under raptor

• 
  @manpreetnand2 ай бұрын

  You had a video of the 4” tip install, where’s that gone?

• 
  @meredithmetalworksАй бұрын

  Ummm unsure on that one sorry.

• 
  @andrewrullo3473 ай бұрын

  Would you still be able to use the different exhaust modes?

• 
  @meredithmetalworks2 ай бұрын

  We have a system that incorporates it 😁

• 
  @JamieMartin-ff1xc3 ай бұрын

  can you get these same snorkels on your website ?

• 
  @meredithmetalworks2 ай бұрын

  Sure is!