Пікірлер

• 
  @bardmadsen69563 ай бұрын

  Doesn't the backlash twist the micrometer? I really like it and going to have to do something like that as I'm always guessing, thanks.

• 
  @RacinJacin3923 ай бұрын

  There is some rotational twist to the quill - nature of the beast I suppose. If you notice the connection to the quill from the "calipers" is a notch. Meaning it (the caliper hook) can float a small amount. Also note the clearance holes on the "anchor point" allows a small amount of adjustment as well. Between those two items, it has been working flawlessly for several years now.

• 
  @drill2.0873 ай бұрын

  Scott!

• 
  @Vinz3ntR5 ай бұрын

  Is there a bom and some building instructions? I wonder if this is possible with battery operated motors as we don't have power sockets close to the pitch

• 
  @TopZueg6 ай бұрын

  I love this. It would be awesome for my hotrod. I would want to use it for efi. Just run a injector plate under it. If you want to make me one or sell this one down the road I sure would love to be the proud owner of it. Let me know please. Thanks.

• 
  @VafaPhotography8 ай бұрын

  Love to buy one off you. Seriously your costs for goods, r & d +$500, labour +$???, and shipping to my Canadian address. Our U11 girls would be very appreciative in how we can use this for their development

• 
  @halservices10 ай бұрын

  Any research paper

• 
  @scottybugatii Жыл бұрын

  Can you pls tell me where you got each part

• 
  @mohammedfouad9212 Жыл бұрын

  good job . what is the kind of wheals and the size

• 
  @ourspacesinc Жыл бұрын

  How does the SCR give you 90 dc ? Does it convert the 120Ac to dc?

• 
  @epict.a.rgaming4291 Жыл бұрын

  Can I buy this off u

• 
  @quetzalconst Жыл бұрын

  hello, could you put the amazon link for the motors please?

• 
  @Amelia15V-ball Жыл бұрын

  For the linear actuator, how did you make it go up and down to control the feeding of balls? I can’t figure that out. My hope is to have it go up and down every ten seconds or so

• 
  @ProSeller101 Жыл бұрын

  Hello do you have instagram id like bait more information?

• 
  @glenbarnett8255 Жыл бұрын

  Wondering if it's for sale?

• 
  @stevehammel2939 Жыл бұрын

  Nice ride, a dragster is the ultimate platform for drag racing

• 
  @mmroguski Жыл бұрын

  The engines are 19V, 2500 rpm and what is the power? What was your wheel diameter and how did you do the speed control?

• 
  @dandyjohnson11 ай бұрын

  I think he said 90 v not 19

• 
  @markross7385 Жыл бұрын

  How much for the blue print? Pretty please

• 
  @bertrandcroft6644 Жыл бұрын

  What on Earth was the point of this game?

• 
  @edem19892 жыл бұрын

  Hi. Can I order it? I need a machine like this.

• 
  @RacinJacin392 Жыл бұрын

  Sorry this was just a project showing what one could build out of scavenged parts and a welder. Nothing available to sell.

• 
  @matiasambrogio27922 жыл бұрын

  what engine are you using??

• 
  @bmwpete65s552 жыл бұрын

  Worlds longest quarter mile!

• 
  @hypnoman2 жыл бұрын

  I would be interested in buying one if you were selling?

• 
  @bobthomas20542 жыл бұрын

  Can I buy one or can you post a tutorial on this

• 
  @user-kx9xt9ph7t2 жыл бұрын

  Dude I will pay you 200.00 for my hs program !!

• 
  @sanjaysanjay-em9tl2 жыл бұрын

  sir do we required high torque motor

• 
  @RacinJacin3922 жыл бұрын

  So you don't need a lot of torque to spin up the motors, but when shooting quick consecutive shots is when you notice the torque. Under powered motors will drop the speed and your quick follow up shot will be less power. The motors I used were pretty good. Also the motor controller parameters will affect this a well. I fiddled with the parameters some using the OEMs instructions.

• 
  @ricardo56702 жыл бұрын

  I have been trying to do the same for over one year, my main problem is the vibration the wheels produce. Can you tell me which tires you used, please?

• 
  @stevewheat90302 жыл бұрын

  Nice 👍

• 
  @williamnewlin1152 жыл бұрын

  Great project. What size tires did you use to launch the balls

• 
  @uhfnutbar12 жыл бұрын

  I play it in 76 i was 11 , never forgot the nixie tubes display :)

• 
  @user-mx1jf5eq8j2 жыл бұрын

  How many degrees is the angle of bending a round iron?

• 
  @sohantariq5312 жыл бұрын

  Where can we buy it from and what is its exact price I need to buy one

• 
  @amd_axolotl26883 жыл бұрын

  Where do i buy

• 
  @user-gx4zg1xz7v3 жыл бұрын

  Hello I want to make a soccer ball. I need you to provide me with engine information and construction drawings Email: [email protected]

• 
  @grahamamon3 жыл бұрын

  How many gears does that car have!

• 
  @moneyup1003 жыл бұрын

  Would you be interested in making one that would be able to launch around 50mph? I’d be happy to put a deposit on one and drive to pick it up. Provide me a quote and let’s talk.

• 
  @emme1979903 жыл бұрын

  Hey brother, would you make some to sell or have you made any for sale.?? 😃😃😃 I would definitely buy one. But I'd like to see it work too. Lol I noticed you didn't show how it worked..hehe Thnx

• 
  @peterhempenius95183 жыл бұрын

  Hey RacinJacin, I wonder what is the benefit of a 90VDC motor over a 24VDC motor? Also I cannot find anything off-the-shelve to connect the wheels easily to the motors..

• 
  @RacinJacin3923 жыл бұрын

  I used those 90VDC motor ONLY because I had them and the 90VDC controllers laying around. For wheel adapters - look to the Go-Cart industry - last time I looked they had Hub Adapters that would work depending on your motor shaft.

• 
  @peterhempenius95183 жыл бұрын

  @@RacinJacin392 Thanks. For some reason the motor vendors don't tend to mention the axle diameter. I'll keep searching for a 12V DC motor 2500rpm with matching diameter so that I can use a 12V battery for 2 motors, keeping about 1000rpm.

• 
  @cherylmaxwell75103 жыл бұрын

  I need this I’ll pay you 300

• 
  @amandasphire313 жыл бұрын

  What would you charge to make one? I am in Ohio and would love one for my son.

• 
  @RacinJacin3923 жыл бұрын

  I'd love to Amanda, but without product liability insurance I'm afraid I cannot. :-(

• 
  @dragsterstransmissions3 жыл бұрын

  How much weight is on the front wheels?

• 
  @RacinJacin3923 жыл бұрын

  Not alot. The WB is 180" the motor is 40" out if that gives you any indication. This is an old video. The car is now supercharged and I just finished making a weight bar for the front because with the additional power it wheelies much much easier now

• 
  @royaswanson3 жыл бұрын

  Do you still use this?

• 
  @tanseldilsen44564 жыл бұрын

  Would you recommend a good dc motor to go faster?

• 
  @RacinJacin3924 жыл бұрын

  This is a 2500rpm motor turned way WAY down. I had a tach on it a while back - I can't remember where I normally run it but it's NO WHERE near 2500rpm. This video is when we FIRST had it running - as my son got older we cranked it MUCH MUCH faster than shown here. Eventually the wheel balance became the limiting factor. I had used cheap wheels and was looking into getting them balanced but never got that far. Bottom line 2500 is MORE than you'll ever need.

• 
  @tanseldilsen44564 жыл бұрын

  More than 2500rpm .looking for engines that will go 120km/h on average. What do you suggest?link pls😇

• 
  @tanseldilsen44564 жыл бұрын

  Would you recommend a good dc motor to go faster?

• 
  @epicinspections4 жыл бұрын

  Well Done!!!

• 
  @RacinJacin3924 жыл бұрын

  Thank You!

• 
  @epicinspections4 жыл бұрын

  I have the same injector? Can you call me? 4803908180

• 
  @epicinspections4 жыл бұрын

  What is the application? Are you running Fuel?

• 
  @RacinJacin3924 жыл бұрын

  Alcohol in a FED

• 
  @chelseakaminski24094 жыл бұрын

  RacinJacin! I was super excited to hear that you are in Ohio. I would absolutely love to get one of these to throw dodgeballs! It would be amazing for practicing my catching daily. Is there any chance you would consider putting one together for me to purchase? I’m in the Cleveland area.

• 
  @RacinJacin3924 жыл бұрын

  Hi Chelsea, Projects like this are a labor of love, meaning that to do it CHEAP requires a LOT of labor. It would become cost prohibitive pretty quick. However IF you can get resourceful, you could build your own! While I welded this one - you could get some of the bolt together aluminum extrusions often used in industry (McMaster-Carr is helpful). But to really do it cheaply you're gonna need to get your A-1 scavenging skills going.

• 
  @justinbirmann12234 жыл бұрын

  If you ever come to the crossroads of selling this game, I would be very interested.

• 
  @theoldar4 жыл бұрын

  I loved this as a kid!

• 
  @RacinJacin3924 жыл бұрын

  BTW those "fun sounds" were the paint coming off. It was a bit unnerving at first, but was not a problem.