Welcome to my channel! This channel is about O-Gauge/O-Scale trains. Make sure to subscribe to stay up to date on the content being put out. Hope you enjoy!!
Sid's Trains Upgrades, Maintenance, and More. Over the many years in the hobby I have developed the skills to upgrade electronics smoke units, etc in locomotives and cars. I have also have very good experience in the realm of maintenance on locomotives. If you are interest in work done to your locomotives, passenger cars, etc email me.
Email: [email protected]
Пікірлер
My son has a 1950s 4-6-4 steam locomotive that needs fixing so I was wondering if you could fix it for him 😊. Thanks
I really enjoyed this video. Thank you for posting it. It looks like you could run a Blunami-equipped locomotive on the same layout and at the same time as almost anything else - like MTH DCS, Lionel Legacy, straight old-time AC - without interference. Is that correct?
Hi Sid! I think you've created a great video here. I too, had heard of Blunami DCC, but was still on the fence with the same concerns voiced below by bernardbob. A friend of mine, who knows you, recommended I watch the above video of yours and I feel Blunami DCC, will be a real contender in 3 rail market. However, the smoke unit issue has to be addressed. Would love to hear from you, as this is something the market needs.
Say, did all the UP berks have whistle tenders? If so, how do you work it? I have that loco, n I push the whistle button on my transformer, n nothing!?
Hi! Just wondered what the purpose of the capacitor used with the bridge rectifier? I've seen a couple ac/dc conversions done on Pullmors using only the rectifier and they seem to run fine.
4449 daylight locomotive steam engine
It’s a thing of beaury
Any way you can show how to wire up a smoke unit?
Love the blue comet
I'm going to guess that you are a Scorpio.
Love that locomotive!
If that universal remote would just operate a powermaster, thus convential locos, it would be complete.
Did you have the same problem of the sound randomly cutting out and how do I fix
I am thinking about putting a Blunami 4008 sound system on a ROW KK 2 engine. Is this possible and how difficult is it install this system. I have found the engine and tender are extremely hard too open up to get to the electronics. I need to talk to you about this process before I start on it or have someone help me who has a lot o experience with these engines
Thanks for the video. I admired this set back when it first came out and as an elementary school kid, it was unimaginably expensive. As far as the sound, I remember at the time reading an article(maybe in the LCCA magazine? Maybe in the catalog where this was sold?) about the sounds on it. I wish I could locate it again, as I remember it having a lot of information. The J was one of Lionel's first Railsound II locomotives(first in the 1995 catalog with 611, then this one in 96), Neil Young was fresh on board with the company, and from what I remember he had people involved in making it the best they could at the time. They did record 611 shortly before excursion "retirement" in 1994. From what I remember, the article talked about how at the time, 611 had been run hard in excursion service and sounded very "tired." If I'm remembering this article correctly, they cleaned up the tracks for #611, but the #600 Warhorse is representative of how the locomotive actually sounded in 1994. Bearing in mind that it's been 25+ years since I read this article, I seem to remember that recording even sort of being the inspiration for making this model.
Sid which older lionel engines can be converted over to legacy system?
I've had my hands on these but never installed one.Isn't Electric RR out of business? I put aan N&W 746 together from parts and would like to put TMCC in it somehow.
Excellent video and explanation of the SoundTraxx system. Enjoyed the video and have kept it for future reference. I have a Right of Way KK-2 engine and wanted to find out if the system you have works on it.
Wow amazing custom model
isflat, blue, red, etc.... and.....
Thanks, Sid. After mulling over a Blunami upgrade for several months, I finally bought a 4408 and am installing it in an MTH PRR K4 that, basically turned into a really good looking doorstop due to failure of the MTH electronics. I went ahead and wired a bridge rectifier and a linear regulator into the K4 and it runs great. But, no smoke, no sounds and no reversing. I reluctantly bought the Blunami board because it solves all the problems except for smoke, specifically puffing smoke with even an inconsistent synch with the drivers. So it is great that you are talking about doing a video on adding that feature but, because of several comments on this post, I don't think many people understand what that means. You can't just add control of the smoke unit to the 4408, it just isn't that simple. And the 4408 does not have enough power to directly drive a smoke unit. Among the problems to solve are 1) how do you make the smoke unit "PUFF" at a rate that is similar to the rate of puff sounds coming from the decoder? Or, 2) is there a simple way to sense (opto or magnetic sensor, flywheel hash marks???) the position and rpm of the drivers for use in triggering the smoke unit fan? Is there some way to use such a sensing system as an input to the 4408 to synchronize with the puffing sound coming from the 4408? If you work out most of this, do you even need the 4408 to run a smoke unit that, like the sound output of the 4408 "approximates" how the smoke unit should operate? Smoke was one major thing that distinguished the post-war train hobby. I think it still is. All of the sophisticated electronics in modern engines are great but, to many of us, as these things turn into more doorstops, solutions such as the Blunami 4408 are the path forward. Without smoke, there is a void in toy train operation. As I progress with my modifications on my K4, I will be happy to share anything I work out but I think may of us would greatly appreciate anything you could do to advance this technology. Again, thanks for your videos. They are great!
0:41 I got that same model of the Lionel Trains Inc C&O 490 great engine great whistle. Mine though is pulling the C&O 4 pack heavyweights and 711 and derby club heavyweights.
Nice switcher engine I got the N&W 266 road name variant and won it on an ebay auction for about $180 or so dollars, easily 3.5 times less than its MSRP. I use it as my main switcher engine in the yards and even on short local runs to various industries (as they did IRL in the 1950s).
Say, you said your turbine can pull lots of cars, but in this video, you only were pulling 7? 😢 alotta cars? Can you give it in numbers? 🤔 🧐
Can you try to move the bell just a little bit higher because the train looks a little wonky with it being lower than the Funnel.
Hello, when you said "his loss, my gain" in its messed up state, might I ask what you initially paid for the beautiful model? ❤ 😊
My favorite 4-8-4 is the NYC Niagara!... it's just BIG! 😮 😊
You had a slope back tender on the thumpnail! But the slopeback wasn't what you worked on! The slopeback was why i watched the video!!! 😮
Wait, I thought LEDs were DC only? Are your trains running on AC, or DC? 🤔
What's the minimum radius your hudson can negotiate? 🤔
Well, the whistle smoke was impressive, initially, but the smoke seemed to disappear the longer the whistle blew! 😊
Sid, would you have tried to get it running or worked on it if the gears were jammed full of rust? 😮🤔
It’s definitely my future in model railroading. For me, the big benefit is ripping out the third rail…
I actually saw another guy do this. To get the pilot and sunken in head-light, he took the 3D model from the polar express gamecube game and 3D printed those parts.
So, is the York train show an all O gauge/scale train show!?
They don't make a puffing smoker? Having the smoke just flowing out doesn't look right to me. BUT I do like the smoke! 😊
Can you provide a wire diagram for these set ups?
Hey Sid can this work on MTH Premiere steam locomotives? I have a Premiere Hudson and Mikado in NYC.
Do you repair 0 scale and 0 27 scale trains for other people at all?
I recently just got a helping hand that holds your soldering gun has a tray built into it magnifying glass with a light but I don't have a soldering gun yet so I'm watching this video so I can learn how to solder I know how to weld but I don't know how to solder at all. I do plan to at some point in the future to put led lights in my different 0 scale and 0 27 scale train stuff and HO scale stuff for a friend of mine and my different diearamas
Sid was using a soldering iron, not a soldering gun! 😮 There's a difference. 🤔
Sid I will be installing rr train controller with nce Do you recommend total dc conversion of my three rail layout is the way to go. I have gargraves track and all the dcc materials to. Install for the anticipated computer control of layout ?
You have done a beautiful job restoring her to her former Glory, Great job 👏 👍
Are you looking to sell her?
Yes, you didn't show us how you deduced it was that radio board!? Show us me how you solved the problem?
This is a pretty good model but, there are some things that you may want to change. 1. In the movie the wheels don't have silver lining on them you should change the lining to black. 2. Your model's railing is off on the left side. Make the railing connected. 3. In the movie on the pilot there is an empty part of it where there was a coupler but was removed. Add that to your model. 4. The whistle is not the sierra railway no. 3 whistle on your model. Please change the whistle sound to that. I hope these things help you improve your model. Watch @trainstorm1225 's video on his movie accurate model so you can get and idea of what I would like you to do.
Awesome
Sid Do you happen to have an example of the wiring diagram that you used. I’m hoping to be able to use the smoke function and the marker lights on the locomotive and tender. Thanks
Currently working on a new "All you need to know video" that will provide that and lots of other information.
@@SidsTrains Thank you!
IS MTH GONE,,.?
Very informationative,!!!
BUT YOU CANNOT JOIN MULTIPLE ENGINES ON A SINGLE TRAIN!!! This is most frustrating as I expand my layout!!!