In Carl's review lab, I test everyday products to help you make an informed buying decision.
Everything I buy on Amazon I test, review, and share the results here.
I hope my short reviews help you save money, or purchase the right product for your needs.
If you make or sell a product and you'd like me to take a look at it. Feel free to email me!
⚠️ Please note: If you buy something through our “links” we may get a small share of the sale.
Пікірлер
0:24 Could you please tell me how to reset the maximum and minimum readings in the "memory" column of this thermometer?
Thanks. I just purchased mine
Glad my video helped
What are those 3 slide like things on the top of the smallest toolbox on top?
I think you can stack more on top
How do we know these are accurate I have got the second one in from the left it is registered at 30°. It is not probably degrees it's about 19 I actually got a refund for it
I tested all side by side. I only found 1 deg out on the majority of them. I bet you had a faulty one.
@@CarlsReviewLab probably I got refund not sure if a will reorder it yet also how fast do yours move because I had a refund I can now play with it and experiment with it if you put it in the fridge which is something I've tried now it is free it takes a while for it to actually rise and go back to room temperature took about 10 minutes It also took ages to drop down to 4°
Thank you! I ended up buying a pair of these. This is the only review video I found on these. I really like them so far. I have AirPod Pros, but I like these so much better and the cost of them compared them is great! Especially for the quality. My AirPods have a horrible sound quality compared to these.
Glad you liked them and my video helped
How’s it more difficult to find? It’s bright white with a tiny bit of colour 😂
It’s like camouflage 😂
$375 and it cannot do duplex printing? 😂😂😂😂 My $65 HP can. As for 'automatic feeder, what do you think the tray is?
I didn’t pay anywhere near that in the UK from a main outlet. USA must be more expensive.
@@CarlsReviewLab I thought I read in here some American paid that much. I'm Canadian. The name didn't give you a hint?
Ah okay
I recently purchased a new Epson Eco Tank 3850 printer at Costco for $325.00. The setup was relatively easy and I had it up and running in about 15 minutes after unboxing. However, I am extremely disappointed in the quality of the printing for both documents and photos.The edging in the photos were grainy and the colors were darker then the original photos. I reset the color management and it still produced a low quality image. The scanner is also cheap inefficient. After scanning a simple document I discovered the text had jagged edges and the tops of the fonts in some sentences were chopped off. The only way I could get nice sharp fonts in a document was to scan in Photo Mode. The top automatic feeder which is used to scan multiple documents or make copies, pulls the entire stack of papers into the feeder all at once. I had to physically stagger each page individually to prevent the stack from jamming the feeder. All in all this printer is constructed of poor quality materials and is cheaply made. Thank God I saved the box. I'm packaging it back up and taking it back to Costco first thing tomorrow.
That sounds like a bad experience I personally haven’t encountered any of that. Yes then print quality it’s amazing but it’s not poor. You have to make sure the settings are correct in print quality and make sure you use the clean nozzle feature once a month. Other than that mines been fine. I’d get a refund for hours 👍
Buy on Amazon: amzn.to/3wGFT3m ( Affiliate Link )
My son brought me one only just plucked up the courage to use it and im always using it now brought some silicone baskets xxxx
Just be careful lifting them out the silicone gets really hot
Purchase from Amazon amzn.to/3RdF2yc ( Affiliate link )
Only 1 unit can be use
@@davefrancisaldeguer9094 per phone? Each one has a unique signal i have never tracker two at once so I will check that. I have one on my phone and wife has the other
Good review thanks, I wonder how useable the phone is while it is inside the case?? Maybe good to try that in another video perhaps! Cheers.
I’ll film that whilst in the ocean on holiday. Thanks for the tip
@@CarlsReviewLab Cheers.
And the TP53 need 1 more AAA battery.
Did you use the AX53 to shoot this video?
No this one was on the DJI Osmo pocket 3. Which I love for a handheld portable camera. Don’t like the quality of this video?
Very helpful, thank you
Thanks for watching
❤
this is great! i just got one
Such a simple but handy tool. Enjoy.
Just in case you're not aware,if you pull up on the small top bottle cap the clear part pulls up to form a tube for access to more difficult areas...
Thanks for that 👍
@@CarlsReviewLab you probably knew that anyway but some people might not..🙂
@@shanewilkinson8075 Exactly many people including my son might miss that.
Thanks for this video mate. I didn't know about this. Just ordered one of amazon for only a fiver.
Good luck. Make sure it’s attached and online correctly before use.
My understanding is that the grooves are more for water dispersion than for spin and the milled face is where most of the spin comes from? Being triangle shaped, do they remove any of the milled face surface?
I’m not 100% sure to be honest. I noticed they take off a little of the edge rather than. Go deeper
They go blunt really quick
Yes they do. I did say in the video I’ve had a few and you need to replace them. Some are also better quality ones than others.
Thanks for the review! I'm a big fan of the hand launch but sometimes that isn't safe, Especially when using propeller guards.
I like hand launch but return is harder as mine always show propeller fail error when I catch it. So have to reset every time. Hence I use the landing mat.
The avg amateur is consistently short on most shots, probably greater than 80% of the time. Why would they need more backspin?
I think for me is a confidence builder.
hit more club
@@veroman007 I always club up 😂 still short lol
I had one of these nearly 30yrs ago and certainly helped at the start of my golfing journey 😊
It’s helping me. I didn’t realise how around my body I swung my irons. First time you use this it shocks you how steep if feels.
Samson sounds better to me. A must fuller sound
I like that better too.
Can it print double sided? I keep seeing people say both yes and no which is it is there a double sided function?
No. I have never seen that function on this model.
Thank you.
It does support duplex printing
@@adomasromanovas no
Thank you
It's a piece of crap. The ink is good but the copy counter does not reset automatically when replacing the Ink waste tank. You have to buy a non Epson copy counter reset online every time and it only reset 80% of the counter. If you are a small business that waste ink tank will cost you in the long run. The waste ink tank does not have a chip and when it does, It does not work to reset the counter. The ADF (Auto Doc Feeder) also goes out and you will have problems. There is no solution.
I’m not a big business so it’s been fine for me and not an issue. I think if you have a business you’d have a better one anyway. Thanks for watching though and sharing your opinion.
Great review!
Thanks
You actually can put the trays directly into the dishwasher.
You can.
que camara actual competiria con la ax53 ??? en el mismo rango de precio
Sorry I cant translate your message 🥲
@@CarlsReviewLab he is asking "What current camera would compete with the ax53??? in the same price range"
@@TheSpaOnWheels Im not sure i have only ever owned this one and also the DJI Osmo 3
@@CarlsReviewLabwhen do you use the ax53 and osmo 3 pocket?
Nope it’s kind of worthless for holding a score card. But for a pencil and balls and tees it’s good. I got the clip that goes under it and put my score card in its jaws.
Why is it worthless I use mine all the time. ? What issues do you find with it.
When you say ''compete with newer models...'' what do you mean? These 'prosumer' 'corders both from Sony and Panasonic stables haven't been updated since around 2018. If you're speaking about 'corders in general they are every bit as relevant today as they have always been - bugger mirrorless.
Maybe I should have said more expensive models rather than newer. I love it and dispute it looking like something out of the 80’s it’s awesome.
Nice review. Thank you!
Hope it helps.
do you know how to make the 4800 print borderless? I have looked everywhere and it only gives me that option for plain white paper and standard printing. I need to choose matte photo paper and borderless. Hope you can help?
I’m really sorry. I don’t. I have never used that option. You’ve taught me something as I didn’t know it could do that.
Ulanzi делает отстой kzread.info968LM3HAq_U
I Googled best printer for printing on 300gsm card stock and this printer came up on all the top 10 review sites, so I bought one and then found that although I have used all the correct settings and tried several different card stocks, 300gsm card stock will not feed through the printer. Looks like I will have to send it back and do more research.
Stops air circulation. Food doesn't cook evenly. My airfryer bins have been in dishwasher every day for over a year, there's not a mark on them.
We just shake the contents every now and then and they are fine. Some people love them and some won’t use them. So each to their own. They do reduce the content volume though I agree on that. 9L probably down to 6L
I’m looking for a fdr ax43 and wondering if i can fit wide angle lens on it for skate videos etc
You may need a lens adapter but I’m sure it will work. I’ve never tried it so I’d look for confirmation elsewhere.
Can't say I've ever heard of sd cards "falling out" of camcorders, but I suppose it's possible with the cheap toy cameras on Amazon now. The AX53 has awesome picture quality, and you don't even need 4K. Just 1080p looks higher than average quality. I bought a CX405 and there is a big difference between them, even both on 1080p.
It’s easier access to it really and I like the safe feeling of knowing the sd card is behind a closed door. Away from the elements
Hi, does it auto-print on both sides if needed? ( whidouth needing to take out the paper and place it back to print on the other side)
No I don’t think it has. I have never printed on both sides.
The blurb on Amazon said it did, which is why I got it, but they lied. It doesn't... which is really annoying, because I would have got a cheaper model if I had known that. I can't fault the copies though, especially if you use authentic ink.
@@jaclam1 hope i helped
@@jaclam1I ended up getting another model very similar to this one and that does auto print on both sides
Its a great camera!! I have three of them 🤗 I would love Sony to bring out a new video camera with the same Image Stable 4k 50p and not 4k 25p
Oh me too. That would be great. I love the simplicity and quality without the having to know lots of settings.
I use a rubber band. Holds all the props, costs nothing.
Love my AX53,agreed with your thoughts, I hate the flip cover over the hotshoe and I'm surprised I've not broken it off yet. I haven't had the same problem with the screen, but to be honest I use sony app on my Tablet too use as a monitor when doing talking head videos and only flip the screen when vlogging. I've been looking too upgrade the ax53 to the AX700 as it has a 1 inch sensor, but it's now out of production. Generally the AX53 is a great camcorder with a few annoying features
For me it was the simplicity and the amazing zoom and the price isn’t bad either. I looked at the Panasonic equivalent and it was far too complex for me to setup and double the price.
Tell me, doesn’t the food just lay in the grease that forms at the bottom of the liner, also do you have to adjust the cooking times?
We clean ours after every use. But yeah we don’t add a liner or anything. No adjustment on time but you can’t cook as much as it reduces the size of the container. But it’s so much easier to clean than the draws. Hope that helps.
@@CarlsReviewLab doesn’t grease build in the bottom of the silicone while your cooking food? And I understand you clean after every use.
@@iokona Depends on the food. Obviously if its foods like sausages then yes it will build up. But the inserts are easier to clean than the metal draws
Are u in the UK? No shortage of dji osmo p3?
Yes I’m in the UK I ordered mine and it took 4weeks to arrive. You can’t get many in shops right now. Online is the only option
Same chip as the silverlit Ycoo robo dr7
I’m not sure sorry.
Very helpful, Carl! You’ve got a real knack for this!
Thanks. Nothing to technical. But I’m Blown away by this camera.
I think it's not more than 1000 lumens. But because it uses lens, it looks brighter. Flashlights with reflector are much better than zoomable flashlight
Hmm possibly. All I know is it’s super bright and enough for what I need.
its def not 900000 lumens. your guess is what mine was too. 1000-2000 lumens. if you look up an actual high lumen flashlight the difference between this and an actually high lumen light is drastic. this things sold as a marketing scheme for people who dont understand lumens or the flashlight market. for instance if you look at the sofirn series of flashlights they are much brighter and actually advertise the correct lumens.
😊😊ชล งงช