Hello to everyone hope you are well,
My name is Allan Rotoni and I am a Multi tasking/Talented and Adventurer Skilled Multi brand Audio and Video Electronics Technician since 2004 up to present. I joined up into KZread world and made up some videos and uploaded it in this channel to be able to share my ideas and to help other people by sharing those informative videos. The content of my channel is all about ELECTRONICS REPAIR, SOLAR COMPUTATION and AUDIO/VIDEO. These are related to audio setup and most of it are repairing of any kinds of Electronics Equipment and Home Appliances as well. Some of it will be containing a little bit of twist like an entertainment and places. Please check out some of my videos and I would really appreciate it by supporting my channel on clicking the SUBSCRIBE, SHARE, LIKE and BELL ALL icon to notify you for the latest video's 😊🙏 Thank you and have a nice day to everyone😊 God bless us.
Пікірлер
These Sennheiser Mics are so damn delicate! I have a e935 mic that I purchased on April 2021 and it mostly just stayed in my cupboard as I rotated my mics. Today I connected it and there's absolutely no sound. I have no idea if the inner coils are gone because it's not visible clearly. How the hell can "German" engineering be so obtuse about the fact that these delicate soldering points should be protected! it's the worst design I've ever seen. I'm never recommending another Sennheiser mic to anyone! This is crazy.
@@mostwanted_007 Hi, thank you for watching ☺️. I would suggest checking the mic with the qualified technician.
Thanks for your information
Hi, you're welcome ☺️
Pwde bang humingi ng cp nr you salamat po
Hi, thank you for watching ☺️ Nasa FB page ko po sir. facebook.com/ARTaudio440?mibextid=ZbWKwL
It really worked😎👍
Great! Thanks for watching☺
Kuys sakin may audio pero d nag wah wah. .😢
@@tvn2855 Hi, thanks for watching ☺️ Same lng din po ang issue or possible volume control.
Husay, eto ang gusto kong tutorial. Ang tanong ko, saan dapat nakaposisyon ang selektor kapag hindi na ginagamit para maiwasan mad-rain ang baterya.
@@papsmontoya5305 Hi, salamat po sa panunuod☺️ E set nyo lng po ang selector switch sa off position.
Very informative ung video nyo sir... more power...
@@bigdaddy1481 Hi, thank you for watching po☺️
Tutunog parin puba.kahit wlang resistor?
@@ChristianMagat-mq8yp Hi, yes po. Tutunog parin.
@@ARTaudio440 Anu Po pinagkaiba sa may resistor at wla?
Pag walang resistor ay hindi clean ang tunog. Pag may resistor ay clean ang tunog. Kelngan ang resistor para mag blend ng normal ang dalawang tunog.
lods ganyan din po ung preamp ko nasa pinas ka po ba
Hi, wala po ako sa pinas.
Thanks sir it works
Great! Thanks for watching ☺️
Supurb solution!😃👍
Hi, thank you for watching ☺️
O meu sub desse modelo esta com o mesmo problema da luz vermelha.
Hi, thank you for watching.
Can you please do a video how to replace on off switch.
Hi, thank you for watching ☺️ If I can get a chance I will do it and will be shared here.
0:13
Pano po repair yung remote?
@@Kris-nx2tv Hi, check nyo po ang connector sa battery at linisin.
What size screwdriver
@@kennethcoutinho4439 Hi, sorry I don't have information about the size of the screw driver.
Thanks bro...your video it helps me alot...im subscribe to your channel n like...
Hi, thank you 😊
You save my Marshall - Thanks
Hi, thank you too for watching ☺️
If I could I would give thousand likes to this video. It solved my problem today. Thanks bro!
Hi, thank you for watching! ☺️
Boss pwede ba magpa gawa syu nyan
Hi sir, sorry kasi nka base po ako sa abroad.
You saved my marshall, i don’t have a service center in india, thanks for the video ❤❤ ❤
Hi, you're welcome and thank you too for watching ☺️
Nice teardown Allan! Did you end up noting what SoC Bose uses in the 600?
Hi, thank you for watching ☺️ I'm sorry could you help me understand about the SoC.
You save my Marshall man! Respect for you video intruction. 🎉🎉
@@Realbadlap Great! Thanks for watching ☺️
We can dance agaiiin. Thank youuuu!!! 🤩
@@7eMZee Great 😃 Thank you for watching ☺️
Cna u share your cslculator
Hi, thank you for watching ☺️ I can only share the basic calculation. Please share your email address.
Hey there! I've got the problem with the sound on the left channel slowly disappearing after turning on the volume wheel, so I found a frustrating solution, just removing the board completly from the plastic wheel cage, now I have the board exposed but at least I get sound from all speakers. Do you know what can be the problem? Maybe the case is jamming some cables or something? I have to find a solution without soldering anything please!
Hi, thanks for watching ☺️ Possibly it's only a loose connection. Better to apply a contact cleaner for all the connectors and volume.
@@ARTaudio440 I've got some WD-30 spray, will that work? Or you know any other universal name for that cleaner? The problem is that as soon as I put the plate back into the case it's loosing the sound, i dont understand why, there's something with the plate I guess
@bogscave Wd-40 can be used for connectors, switches and jacks except for the volume control. Try to trace where the loose part is by bending the wires attached to the control board, or you must have to solder the volume and see the condition same like in the video.
Thanks bro, if it worked for me, you saved my life hehe😊
Hi, thank you for watching ☺️
Almost gave up on it to be honest. I tried dozen times before it finally worked. Thanks!
Great! 👍 Thanks for watching ☺️
FCK, I can't hear the video cox my speaker is not turning on.
UPDT i used my airpod, but learned that he is not speaking. but great video thanks. 🤣🤙
Hi, thank you for watching 😅 The video has only animated text, sorry for that.
@@Nazwan-r7r Hi, thank you for watching 😅 The video has only animated text, sorry for that.
thank you..its really help me out the problem..Love you ..Bro
@@ahaogachui Hi, your welcome and thank you too for watching ☺️
Ok exelente video.ocupo el diagama😊ke ago
Hola, genial! Gracias por ver☺️
kzread.info/dash/bejne/fJZ6zq6DeNuWc5c.htmlsi=3jxnYAacoUXhRXbI
i have the same problem, do you have any idea.
What buttons are you pressing on the remote in the beginning
Hi, thank you for watching ☺️ I pressed both at the same time the left cursor and negative volume. Can zoom in the video to able see it clearly.
Just fixed my 3 years old Killburn II, had the same issue. Just unplugged, used eraser, plugged in, and everything ok. Thank you very much, you saved me 50 Euros, or dont know how much would they take in some repair shop for this.
@@MARTY22222222 Great! Thank you for watching ☺️
@@ARTaudio440 my kilburn 2 battery not working now i have 4 lithium ion cells 3.7 volt 2200mh each how i can connect them with each other and with bms of kilburn 2 ... please help me
@@DilpreetSingh-pe8is Hi, just dismantle the original battery packed and follow the connections.
@@ARTaudio440 i dismantle it and now i forgot how was it is connected
@@ARTaudio440 actually its one cell was dead so i dismantle all 4 cell and checked them with multimeter so i found one faulty .. which i replaced with new one now i forget the contention details
so what happent , model sony "XX" CT290 all sub woofer , that versi type , that problem all IC eeprom?... 😅, in the all world 😂, trying to fix it, that IC
@@studiocad62 Hi, thank you for watching☺️
My elite 4 active left bud not connecting. I can do hard reset with both buds in the case but the left bud will not reset when it is on its own. Is there something different with the elite 4 active
Hi, thank you for watching ☺️ It's the same. Maybe the left bud switch is not functioning. Is the left bud switch functioning?
@@denisthompson7160 Try to apply the same procedure in this video.
How can i take out the board?
Hi thank you for watching ☺️ Let me check, but you can find it once you are done disassembling it.
Hi Boss! Try ko lang mag ask kung papalarin pong sagutin nyo. I have an issue of the HX Stomp XL not booting up. I have tried reinstalling a new firmware but still the same, even tried Attempted to perform a factory reset by holding Footswitches 2 and 3 while powering on the unit, but this did not resolve the issue an stuck as will reset presets... What do you think is the issue sir?
Hi po, umabot kayo dito sir 6:50
Nuhun wa,,,aslina huuh ayaan nu nyelap
Hi, thank you for watching☺
thanks bro!
Hi, you're welcome! Thank you for watching ☺️
Wow! galing
Thank you for watching ☺️
Sir Pwede po ba makahingi ng copy ng excel sheet na yan?
Hi, po. Salamat po sa panunuod, di pa po tapos yan sir. May mga kulang pa. Meron ako yung basic lng ang pwede ko ibigay ng free. Pero yung ginagamit ko po na yan ay may bayad po ang copy pero di pa sya tapos.
Hello! I'm looking to replace my LCD screen as mine has faded out. Is it just a simple unscrew and screw-on type of a situation? A video would help too. Hope someone can help!
Hi, thank you for watching ☺️ I would suggest bringing it to an authorized service center to make sure no additional damage. Replacing the LCD is a bit difficult to unsolder the pins due to the double sided board.
Thank , god blessing!
Hi, thank you for watching☺️
Thank you so much your video is so helpful for me😊
Hi, you're welcome and thank you too for watching ☺️
fixed it by clearing storage on app
Great! Thank you for watching ☺️
Wow! all in 1 at madali intindihin 👌
Hi, salamat po sa panunuod☺️
its not working for me
Hi, thank you for watching ☺️ Do your earphones have power on both sides?
@@ARTaudio440 yes
The left side is blinking faster then the right so I did what u showed but the right side is still blinking I tried this multiple times its still not working
@@Trynnotitan Do your earphones both sides blink fast during reset on 2:00 ?
@ARTaudio440 No,When I do what you showed the left side stops blinking fast and and blinks white slowly but right side is still blinking blue slowly
Hi there.. I had both U1501 and 1401 replaced with new IC's. The unit powers on now, but only for 1 minute and then switches off and won't switch on again for about 10 minutes.. You have to disconnect it from the power and then, IF I'm lucky it switches back on briefly again... Any Idea what might cause this??
Hi, thanks for watching ☺️ Please check and monitor the output volts of these two ic's. Make sure it has 5 volts output. If all drops, please check the main power supply.
Hello sir my pod x3 line6 is not emitting any sound and has no display lights I don't know what to do please help me please
Hi, is your power supply original?