This channel will feature all types on automotive content including pulling classic cars from barns, getting them Up-N-Runnin, trouble shooting, repairs and much more.
Have you heard of Mortske? He likes those flex-hoses a lot for some reason. ha ha Great car.
@friguy444421 күн бұрын
WHAT? He doesn't WANT to do any more?? This is an AWESOME ROCK n ROLL MACHINE!!! AHH!! Fix it all the way and set her free!!!
@pnabsie5830Ай бұрын
Did you work out what the noise in the 56 Buick engine was? Is it fixed?
@up-n-runnin377Ай бұрын
Yes, it was just that the lifters were not pumped up yet. It's quiet now.
@okc557Ай бұрын
Sounds like the belt needs replaced
@allencarlson8976Ай бұрын
Had a similar bad experience with 1A Auto last week. I too am done with online parts. I'll watch their DIY videos all day long
@up-n-runnin377Ай бұрын
Thanks for watchin'. I too like their videos. They do them well. That stinks that you had a bad experience with them. I think the online places just don't care that much. If they are like the auto parts stores, they don't pay anything either. I'm pretty lucky, I've got a couple of very good people that I deal with locally.
@luckyluciano1160Ай бұрын
you did what a Ford owner would do in that situation just keep cranking it after hearing a concerning noise coming from the engine and it backfiring through the carburetor🤦♂️
@allstylinone5122Ай бұрын
Any rubbing on the fuel line when gunning the engine will cause a fuel leak. Check out the line is clear to move without any rubbing while driving.
@allstylinone5122Ай бұрын
Hope ya bought a really good FIRE Extinguisher! 🧐
@allstylinone5122Ай бұрын
Note to self! FUMES IGNITE not the fluid, 😅
@indianachrisUDX1313Ай бұрын
Nice Job Man!
@rapcreeperproductions3269Ай бұрын
The M3 halftrack is a pretty good vehicle considering various roles. Its my top dream vehicle.
@anyone4309Ай бұрын
you are a joke, did you not see the MSD blaster coil and coil wire on top of the HEI cap with power wires run to the external coil. That means it has been converted to external coil. your not a wiring guru?? your not a car guru, you remind me of a high school shop class teacher those who can't teach. It was a pain to watch you
@gol2163Ай бұрын
Do you know if the owner would consider selling? Dream car of mine. Sweet video. Thanks
@up-n-runnin377Ай бұрын
Thanks for watchin'. This car was sold about the time the video came out. Sorry.
@KeithCalitriАй бұрын
You have no clue what you’re doing why are you not pouring fuel in bowl?
@up-n-runnin377Ай бұрын
Off camera, I did fill the fuel bowls with fresh gas. Thanks for watchin'.
@georgestoner95412 ай бұрын
Just take the back seat out and you can access the trunk and use a flat screwdriver and there's a slot in the truck lock, stick the screwdriver in the slot and turn the screwdriver and the trunk opens
@TheNoncritical12 ай бұрын
Maybe it's just me, but I don't get under any car that doesn't have jack stands as a life insurance policy.
@user-ht1xu4gv2u2 ай бұрын
Sunurban squarebody😅😅
@indianachrisUDX13132 ай бұрын
Love the Bloopers, LOL I'm sure it will Run again!
@user-ht1xu4gv2u2 ай бұрын
You could adjust the dwell thru small window in cap slide it up then use tool to adjust😊😊
@user-ht1xu4gv2u2 ай бұрын
Coil fuel pump dizzy cap points wires. Not too much to go wrong. Timing chain. Too😊
@patrickm.84252 ай бұрын
That crap trans isn't going to handle no 500hp BBC!! ROFL!! Gonna need a built TH350 or TH400 in that thing. If you wanna stay with manual trans, prepare to drop some bucks for one that will handle that kind of torque. It definitely has potential to be a sweet ride! P.S. Learn to set timing! T = Tonawanda 0716 = July, 16th XCH = XCH is the suffix for the over the counter 454 LS7 crate engine. This engine was purchased over the GM parts counter, it started life as a bad ass piece, handle it with loving care! If nobody has changed any parts out of this engine, you have a 12.25:1 compression engine. You will need to run high octane fuel or set your timing way back. Don't cause detonation, it will destroy your engine. 4 bolt main, heavy duty rods, forged piston, steel crank, req port heads. It's badass. With right fuel and timing, should be an easy 600+hp engine. Enjoy! 💪
@dennisbecher45572 ай бұрын
Hope you two tone the Buick body like many of them are using the same turquoise with white like the roof. Not sure if its the same turquoise as the 55 and 56 Chevy...
@dennisbecher45572 ай бұрын
Did you ever add an episode 6 to the 1956 Buick Century? I was dying to see her painted up and looking new..
@up-n-runnin3772 ай бұрын
Thanks for watchin'. No Buick episode 6 yet. However, I have been saving footage of me working on the car. It got put on the back burner for a while, but we have been actively working on it in recent weeks, today it got about 4 hours of sanding done on it. That being said, I most likely will not put out another episode until it goes into final sanding or when it goes into the paint booth, which may be a little while yet. (Sanding videos are not that exciting as I'm sure you will understand.) I'll shoot some footage of it and will include it in another episode that will go live sooner. I'm glad you asked about it.
@coryclowers30282 ай бұрын
It's painful watching you work
@coryclowers30282 ай бұрын
At TDC, always point rotor at #1
@_WyreTheWolf2 ай бұрын
Too bad we wont see a build series on this monster. She has all the trappings of a fine hot rod.
@marcosathens81402 ай бұрын
@ 28.40, your timing is off.
@donbeaubien23722 ай бұрын
Can the wheel cylinders be replaced with out tearing the whole brake apart? Thanks
@donbeaubien23722 ай бұрын
Hello, do you know if the sequential taillights can be bypassed or up graded? Just purchased a 65 and trying to work out some bugs. Thanks
@jimirox19282 ай бұрын
Forget my previous comments except for the transmission. Scatter Shield + Ladder bars + drive shaft loop spells DRAG CAR!
@gordocarbo13 күн бұрын
Not always. I put a loop and scattershield on all my st cars.
@boburwell99212 ай бұрын
Definitely real z28
@jimirox19282 ай бұрын
Who cares! It's a Standard Shift! That's the most important aspect! Yall can take your slush box Automatics to the scrap yard. If the trans isn't a Muncie M22. Make sure to investigate it thoroughly because you'll need a M22 or a newer Tremec 5 or 6 speed to handle that Big Block torque. Good find guys.👍
@allstylinone51222 ай бұрын
I want it, Same as my Dads two tone blue w/white 🤍 Never used first gear to take off under normal conditions, Too low, hench Granny gear. 👍
@That70sChannel2 ай бұрын
Nice. Subscribed!
@up-n-runnin3772 ай бұрын
Thank you.
@randallamps2 ай бұрын
Glad you did away with that MSD and chrome coil bs and went back to factory HEI coil ignition. People who rag cars out must have some kind of screw loose. If you have a good-looking wife or girlfriend, you would have all these guys melting like butter in the palm of your hand just like those other "barn find"/"will it run" you tube grease monkeys.
@rustythetrucker35132 ай бұрын
Cover the carb foo
@RT22-pb2pp2 ай бұрын
In 81 no those engines were low hp crap
@waynebreedlove97382 ай бұрын
It's still a 80s ventege camaro means it's just junk.
@danielsteward50902 ай бұрын
That is a 454 assembled in Tonawanda, New York. Possibly an LS6.
@danielsteward50902 ай бұрын
My God, it hurts my soul watching him try to start this engine with no clue what he is doing. Its like a monkey humping a football. I hope he doesn't hurt that rare engine trying to start it.
@jeffwolf80182 ай бұрын
That long blower is awesome to keep far away from the mice and rat crap and pee.. that stuff is horribly bad for you to be anywhere near.. can never forget about cockroach pee and crap
@jamesmcmechan8882 ай бұрын
VIN Engine code is "H" for a 305 which was standard for the Z28 in all states except Cali and optional for all others including Cali Z28s. Was built in Van Nuys.
@darrylmonroe8022 ай бұрын
It looks like the grill is from a 79 Z28
@lonniekiser36122 ай бұрын
Cool deal 👍👍✌️
@vagabond96h2 ай бұрын
Better lighting would help the viewer.
@brucephillips73502 ай бұрын
I
@HighRevNation2 ай бұрын
These second generation camaros are quickly gaining popularity. They are still relatively affordable (especially compared to 1 gens) and they still are very much considered a "muscle car"... or can be when your dropping in a motor like that! Really looking forward to seeing what ya'll do with this!
@mikel55712 ай бұрын
Very funny. I’m no expert but hat looks like a problem”. I had one back in the 80’s , damn, I wish I still had it, fun car and made a lot of friends of the opposite sex
@adamscott97252 ай бұрын
If memory serves the bottom bolt at the mechanical fuel pump, is longer and can be switched with the top bolt to hold the pump rod. Then switched back after the pump is installed.
@joelowery73002 ай бұрын
Once you get the top open you grab the bag and push air to the bottom.
Пікірлер
thanks
Have you heard of Mortske? He likes those flex-hoses a lot for some reason. ha ha Great car.
WHAT? He doesn't WANT to do any more?? This is an AWESOME ROCK n ROLL MACHINE!!! AHH!! Fix it all the way and set her free!!!
Did you work out what the noise in the 56 Buick engine was? Is it fixed?
Yes, it was just that the lifters were not pumped up yet. It's quiet now.
Sounds like the belt needs replaced
Had a similar bad experience with 1A Auto last week. I too am done with online parts. I'll watch their DIY videos all day long
Thanks for watchin'. I too like their videos. They do them well. That stinks that you had a bad experience with them. I think the online places just don't care that much. If they are like the auto parts stores, they don't pay anything either. I'm pretty lucky, I've got a couple of very good people that I deal with locally.
you did what a Ford owner would do in that situation just keep cranking it after hearing a concerning noise coming from the engine and it backfiring through the carburetor🤦♂️
Any rubbing on the fuel line when gunning the engine will cause a fuel leak. Check out the line is clear to move without any rubbing while driving.
Hope ya bought a really good FIRE Extinguisher! 🧐
Note to self! FUMES IGNITE not the fluid, 😅
Nice Job Man!
The M3 halftrack is a pretty good vehicle considering various roles. Its my top dream vehicle.
you are a joke, did you not see the MSD blaster coil and coil wire on top of the HEI cap with power wires run to the external coil. That means it has been converted to external coil. your not a wiring guru?? your not a car guru, you remind me of a high school shop class teacher those who can't teach. It was a pain to watch you
Do you know if the owner would consider selling? Dream car of mine. Sweet video. Thanks
Thanks for watchin'. This car was sold about the time the video came out. Sorry.
You have no clue what you’re doing why are you not pouring fuel in bowl?
Off camera, I did fill the fuel bowls with fresh gas. Thanks for watchin'.
Just take the back seat out and you can access the trunk and use a flat screwdriver and there's a slot in the truck lock, stick the screwdriver in the slot and turn the screwdriver and the trunk opens
Maybe it's just me, but I don't get under any car that doesn't have jack stands as a life insurance policy.
Sunurban squarebody😅😅
Love the Bloopers, LOL I'm sure it will Run again!
You could adjust the dwell thru small window in cap slide it up then use tool to adjust😊😊
Coil fuel pump dizzy cap points wires. Not too much to go wrong. Timing chain. Too😊
That crap trans isn't going to handle no 500hp BBC!! ROFL!! Gonna need a built TH350 or TH400 in that thing. If you wanna stay with manual trans, prepare to drop some bucks for one that will handle that kind of torque. It definitely has potential to be a sweet ride! P.S. Learn to set timing! T = Tonawanda 0716 = July, 16th XCH = XCH is the suffix for the over the counter 454 LS7 crate engine. This engine was purchased over the GM parts counter, it started life as a bad ass piece, handle it with loving care! If nobody has changed any parts out of this engine, you have a 12.25:1 compression engine. You will need to run high octane fuel or set your timing way back. Don't cause detonation, it will destroy your engine. 4 bolt main, heavy duty rods, forged piston, steel crank, req port heads. It's badass. With right fuel and timing, should be an easy 600+hp engine. Enjoy! 💪
Hope you two tone the Buick body like many of them are using the same turquoise with white like the roof. Not sure if its the same turquoise as the 55 and 56 Chevy...
Did you ever add an episode 6 to the 1956 Buick Century? I was dying to see her painted up and looking new..
Thanks for watchin'. No Buick episode 6 yet. However, I have been saving footage of me working on the car. It got put on the back burner for a while, but we have been actively working on it in recent weeks, today it got about 4 hours of sanding done on it. That being said, I most likely will not put out another episode until it goes into final sanding or when it goes into the paint booth, which may be a little while yet. (Sanding videos are not that exciting as I'm sure you will understand.) I'll shoot some footage of it and will include it in another episode that will go live sooner. I'm glad you asked about it.
It's painful watching you work
At TDC, always point rotor at #1
Too bad we wont see a build series on this monster. She has all the trappings of a fine hot rod.
@ 28.40, your timing is off.
Can the wheel cylinders be replaced with out tearing the whole brake apart? Thanks
Hello, do you know if the sequential taillights can be bypassed or up graded? Just purchased a 65 and trying to work out some bugs. Thanks
Forget my previous comments except for the transmission. Scatter Shield + Ladder bars + drive shaft loop spells DRAG CAR!
Not always. I put a loop and scattershield on all my st cars.
Definitely real z28
Who cares! It's a Standard Shift! That's the most important aspect! Yall can take your slush box Automatics to the scrap yard. If the trans isn't a Muncie M22. Make sure to investigate it thoroughly because you'll need a M22 or a newer Tremec 5 or 6 speed to handle that Big Block torque. Good find guys.👍
I want it, Same as my Dads two tone blue w/white 🤍 Never used first gear to take off under normal conditions, Too low, hench Granny gear. 👍
Nice. Subscribed!
Thank you.
Glad you did away with that MSD and chrome coil bs and went back to factory HEI coil ignition. People who rag cars out must have some kind of screw loose. If you have a good-looking wife or girlfriend, you would have all these guys melting like butter in the palm of your hand just like those other "barn find"/"will it run" you tube grease monkeys.
Cover the carb foo
In 81 no those engines were low hp crap
It's still a 80s ventege camaro means it's just junk.
That is a 454 assembled in Tonawanda, New York. Possibly an LS6.
My God, it hurts my soul watching him try to start this engine with no clue what he is doing. Its like a monkey humping a football. I hope he doesn't hurt that rare engine trying to start it.
That long blower is awesome to keep far away from the mice and rat crap and pee.. that stuff is horribly bad for you to be anywhere near.. can never forget about cockroach pee and crap
VIN Engine code is "H" for a 305 which was standard for the Z28 in all states except Cali and optional for all others including Cali Z28s. Was built in Van Nuys.
It looks like the grill is from a 79 Z28
Cool deal 👍👍✌️
Better lighting would help the viewer.
I
These second generation camaros are quickly gaining popularity. They are still relatively affordable (especially compared to 1 gens) and they still are very much considered a "muscle car"... or can be when your dropping in a motor like that! Really looking forward to seeing what ya'll do with this!
Very funny. I’m no expert but hat looks like a problem”. I had one back in the 80’s , damn, I wish I still had it, fun car and made a lot of friends of the opposite sex
If memory serves the bottom bolt at the mechanical fuel pump, is longer and can be switched with the top bolt to hold the pump rod. Then switched back after the pump is installed.
Once you get the top open you grab the bag and push air to the bottom.